vdsl2LConfProfRaUsNrmUs
ZYXEL-IES5000-MIB ·
.1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.4
Object
column
r/w
0.1 dB Unsigned32
(RA-USNRMus). The Upstream Up-Shift Noise Margin value, to be used when xdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is above this value and stays above it for more than the time specified by the xdsl2LConfProfRaUsTimeUs, the xTU-C shall attempt to increase the upstream net data rate. The Upstream Up-shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB).
Context
- MIB
- ZYXEL-IES5000-MIB
- OID
.1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.1 dB
- Parent
- vdslLineConfProfileExtendedEntry
- Table
- vdslLineConfProfileExtendedTable
- Siblings
- 6
Syntax
0.1 dB Unsigned32
Values & Constraints
Object Constraints
range: 0-310
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2LConfProfRaModeDs (RA-MODEds).
The mode of operation of a rate-adaptive xTU-C in the transmit
direction. The parameter can take three values:
manual(1),
raInit(2),
dynamicRa(3). | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.1 |
| vdsl2LConfProfRaModeUs (RA-MODEus).
The mode of operation of a rate-adaptive xTU-R in the transmit
direction. The parameter can take three values:
manual(1),
raInit(2),
dynamicRa(3). | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.2 |
| vdsl2LConfProfRaUsNrmDs (RA-USNRMds).
The Downstream Up-Shift Noise Margin value, to be used when
xdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream
noise margin is above this value and stays… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.3 |
| vdsl2LConfProfRaDsNrmDs (RA-DSNRMds).
The Downstream Down-Shift Noise Margin value, to be used when
xdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream
noise margin is below this value and sta… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.5 |
| vdsl2LConfProfRaDsNrmUs (RA-DSNRMus).
The Upstream Downshift Noise Margin value, to be used when
xdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream
noise margin is below this value and stays be… | column | 0.1 dB Unsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.6 |
| vdsl2LConfProfProfileName | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.7 |