vdsl2LineProfSosTimeDs

ZYXEL-IES5000-MIB · .1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.7

Object

column r/w SNMPv2-SMIUnsigned32

The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS 
(see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS 
triggering criteria are enabled, and the value corresponds with duration of the time 
window used in the standard SOS triggering criteria in the downstream direction. 
See G.993.2 for detailed usage rules.
              		
	   The special value zero indicates that the standard SOS triggering criteria are disabled, 
	   i.e., vendor-discretionary values may be used instead of the values configured in the MIB 
	   for the following parameters: SOS-NTONES-ds, SOS-CRC-ds, SOS-TIME-ds.
              	   
	   This parameter applies in the downstream direction. The valid range of non-zero values 
	   is from 64 ms to 16320 ms in steps of 64 ms.

Context

MIB: ZYXEL-IES5000-MIB
OID: .1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.7
Type: column
Access: readwrite
Status: current
Parent: vdsl2LineConfProfileExtendedEntry
Table: vdsl2LineConfProfileExtendedTable
Siblings: 22

Syntax

SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vdsl2LineProfDpboEPsdID standard psd shape id for psd toolbox	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.1`
vdsl2LineProfSosCrcUs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the standard SOS triggeri…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.10`
vdsl2LineProfSosNToneDs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS trigg…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.11`
vdsl2LineProfSosNToneUs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS trigg…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.12`
vdsl2LineProfSosMaxDs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a 120-second interv…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.13`
vdsl2LineProfSosMaxUs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a 120-second interv…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.14`
vdsl2LineProfRocEnableDs Enable the robust overhead channel.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.17`
vdsl2LineProfRocEnableUs Enable the robust overhead channel.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.18`
vdsl2LineProfRocSnrmDs The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel initialization polic…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.19`
vdsl2LineProfBitSwapDs	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.2`
vdsl2LineProfRocSnrmUs The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel initialization polic…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.20`
vdsl2LineProfRocMinInpDs This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 t…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.21`
vdsl2LineProfRocMinInpUs This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 t…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.22`
vdsl2LineProfDpboType	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.23`
vdsl2LineProfDpboEselMin	column	0.5 dB Integer32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.24`
vdsl2LineProfCompatible Compatible to spectrum usage of adsl2 or adsl2+ line.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.25`
vdsl2LineProfBitSwapUs	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.3`
vdsl2LineProfProfileName	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.4`
vdsl2LineProfDynamicDepthEnableDs Enable the dynamic change of interleave depth.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.5`
vdsl2LineProfDynamicDepthEnableUs Enable the dynamic change of interleave depth.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.6`
vdsl2LineProfSosTimeUs The parameter SOS-TIME-u s is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS triggeri…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.8`
vdsl2LineProfSosCrcDs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the standard SOS triggeri…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.9`