vdsl2ChanConfProfGinpRtxModeDs
ZYXEL-IES5000-MIB ·
.1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.4
Object
column
r/w
Xdsl2ConfigRtxMode
G.inp(G.998.4) support setting on downstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4).
Context
- MIB
- ZYXEL-IES5000-MIB
- OID
.1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vdsl2ChanConfProfileExtendedEntry
- Table
- vdsl2ChanConfProfileExtendedTable
- Siblings
- 26
Syntax
Xdsl2ConfigRtxMode
- Source
- Xdsl2ConfigRtxMode
- Base type
Enumeration
Values & Constraints
Type Values
0 | forbidden |
1 | preferred |
2 | forced |
3 | test |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdsl2ChanConfProfphyRds retransmission mode | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.1 |
| vdsl2ChanConfProfGinpNdrMaxDs Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.10 |
| vdsl2ChanConfProfGinpNdrMaxUs Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.11 |
| vdsl2ChanConfProfGinpShineRatioDs The assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.12 |
| vdsl2ChanConfProfGinpShineRatioUs The assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.13 |
| vdsl2ChanConfProfGinpLeftrThresholdDs The rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.14 |
| vdsl2ChanConfProfGinpLeftrThresholdUs The rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.15 |
| vdsl2ChanConfProfGinpMaxDelayDs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.16 |
| vdsl2ChanConfProfGinpMaxDelayUs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.17 |
| vdsl2ChanConfProfGinpMinDelayDs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.18 |
| vdsl2ChanConfProfGinpMinDelayUs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.19 |
| vdsl2ChanConfProfphyRus retransmission mode | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.2 |
| vdsl2ChanConfProfGinpInpMinDs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-31 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.20 |
| vdsl2ChanConfProfGinpInpMinUs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-31 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.21 |
| vdsl2ChanConfProfGinpReinCfgInpDs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.22 |
| vdsl2ChanConfProfGinpReinCfgInpUs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.23 |
| vdsl2ChanConfProfGinpReinCfgFreqDs G.inp-specific value that overrules the traffic configuration setting. Unit is Hz.
The possible values are:
100 - 100Hz
120 - 120Hz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.24 |
| vdsl2ChanConfProfGinpReinCfgFreqUs G.inp-specific value that overrules the traffic configuration setting. Unit is Hz.
The possible values are:
100 - 100Hz
120 - 120Hz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.25 |
| vdsl2ChanConfProfSosMinRateB0Ds This parameter specifies the minimum net data rate required for a valid SOS request
in the downstream direction. The value shall be coded as an unsigned integer representing
the… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.26 |
| vdsl2ChanConfProfSosMinRateB0Us This parameter specifies the minimum net data rate required for a valid SOS request
in the downstream direction. The value shall be coded as an unsigned integer representing
the… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.27 |
| vdsl2ChanConfProfProfileName | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.3 |
| vdsl2ChanConfProfGinpRtxModeUs G.inp(G.998.4) support setting on upstream direction.
The possible values are:
Forbidden(0) - Support for G998.4 is disabled.
Preferred(1) - If G998.4 is supported by the far-en… | column | Xdsl2ConfigRtxMode | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.5 |
| vdsl2ChanConfProfGinpEtrMaxDs Defines the maximum allowed value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.6 |
| vdsl2ChanConfProfGinpEtrMaxUs Defines the maximum allowed value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.7 |
| vdsl2ChanConfProfGinpEtrMinDs Defines the minimum value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.8 |
| vdsl2ChanConfProfGinpEtrMinUs Defines the minimum value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.9 |