vdslLineConfSosTimeUs
ZYXEL-IES5000-MIB ·
.1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.69
Object
The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value corresponds with duration of the time window used in the standard SOS triggering criteria in the upstream direction. See G.993.2 for detailed usage rules. The special value zero indicates that the standard SOS triggering criteria are disabled, i.e., vendor-discretionary values may be used instead of the values configured in the MIB for the following parameters: SOS-NTONES-ds, SOS-CRC-ds, SOS-TIME-ds. This parameter applies in the upstream direction. The valid range of non-zero values is from 64 ms to 16320 ms in steps of 64 ms.
Context
- MIB
- ZYXEL-IES5000-MIB
- OID
.1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.69- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vdslLineConfEntry
- Table
- vdslLineConfTable
- Siblings
- 92
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdslLineConfUpbo Enable/disable upstream power backoff control. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.1 |
| vdslLineConfPsdShape This object is supported by R5.01 and later versions. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.10 |
| vdslLineConfDpbo This object is supported by R5.01 and later versions. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.11 |
| vdslLineConfDpboParamEsel This object is supported by R5.01 and later versions. | column | 0.5dB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.12 |
| vdslLineConfDpboParamEscma -1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions. | column | Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.13 |
| vdslLineConfDpboParamEscmb -1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions. | column | Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.14 |
| vdslLineConfDpboParamEscmc -1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions. | column | Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.15 |
| vdslLineConfDpboParamMus This object is supported by R5.01 and later versions. | column | -0.5 dBm/Hz Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.16 |
| vdslLineConfDpboParamFmin This object is supported by R5.01 and later versions. | column | 4.3125kHz Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.17 |
| vdslLineConfDpboParamFmax This object is supported by R5.01 and later versions. | column | 4.3125kHz Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.18 |
| vdslLineConfDpboParamPsdId Always return 0 when read. This object is supported by R5.01 and later versions. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.19 |
| vdslLineConfVdslProfile Set VDSL profile. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.2 |
| vdslLineConfCompatible Compatible to spectrum usage of adsl2 or adsl2+ line. The object is supported by R5.02 and later versions. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.20 |
| vdslLineConfPowerMode The power mode of the VDSL line. This MIB object is supported by R5.05 and later versions.
1: fix
2: priorityToPower
3: priorityToRate | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.21 |
| vdslLineConfVturMaxTxPower The maximum allowed transmit power of VTU-R.
-130~200 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.22 |
| vdslLineConfVtucMaxTxPower The maximum allowed transmit power of VTU-C.
-50~200 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.23 |
| vdslLineConfMaxRxPower The maximum aggregate received power.
-255~255 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.24 |
| vdslLineConfPMask To configure a bit mask to select preferred protocols :
0x00000001~0xffffffff
0x00000001 G.992.1 A|B
0x00000002 G.992.2 A
0x00000004 G.992.3 A|B
0x00000010 G.992.5 A|B
0x00000020 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.25 |
| vdslLineConfAturCarrierMask Sub-carrier masking for ADSL2+ fallback,
Upstream sub-carrier mask. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.26 |
| vdslLineConfAtucCarrierMask0 Sub-carrier masking for ADSL2+ fallback,
Downstream sub-carrier mask. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.27 |
| vdslLineConfAtucCarrierMask1 Sub-carrier masking for ADSL2+ fallback,
Downstream sub-carrier mask. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.28 |
| vdslLineConfSnrModeDs To enable the transmitter referred virtual noise in the downstream direction.
1: enable(1)
2: disable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.29 |
| vdslLineConfFrequencyPlan Set VDSL frequency plan. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.3 |
| vdslLineConfSnrModeUs To enable the transmitter referred virtual noise in the upstream direction.
1: enable(1)
2: disable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.30 |
| vdslLineConfTxRefVnDs To configure downstream transmitter referred virtual noise. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.31 |
| vdslLineConfTxRefVnUs To configure upstream transmitter referred virtual noise. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.32 |
| vdslLineConfTpstcTypeAdsl TPS-TC type for ADSL mode VLC.
1: atm(1)
2: ptm(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.33 |
| vdslLineConfTpstcTypeVdsl TPS-TC type for VDSL mode VLC.
1: atm(1)
2: ptm(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.34 |
| vdslLineConfVturInmEq The INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM_INPEQ_MODE defines the way of computation of
Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4… | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.35 |
| vdslLineConfVtucInmEq The INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM_INPEQ_MODE defines the way of computation of
Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4… | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.36 |
| vdslLineConfInmVturCC The INM Cluster Continuation. The valid values for INMCC range from 0 from
64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded
symbols will be allowed… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.37 |
| vdslLineConfInmVtucCC The INM Cluster Continuation. The valid values for INMCC range from 0 from
64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded
symbols will be allowed… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.38 |
| vdslLineConfInmVturIATO The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values
for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.39 |
| vdslLineConfRfiBand Set VDSL customized RFI configuration.
disable: not apply RFI notch to port
ansi: use pre-defined ANSI RFI notch
etsi: use pre-defined ETSI notch
custom: user needs to define cust… | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.4 |
| vdslLineConfInmVtucIATO The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values
for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.40 |
| vdslLineConfInmVturIATS The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for
INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded
in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.41 |
| vdslLineConfInmVtucIATS The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for
INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded
in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.42 |
| vdslLineConfInmVtucISDBUS ISDD sensitivity of VTU-C,-128~127 in unit of 0.1dB. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.43 |
| vdslLineConfGinpRtxModeDs G.inp(G.998.4) support setting on downstream direction. The possible values are:
Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-e… | column | Xdsl2ConfigRtxMode | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.44 |
| vdslLineConfGinpRtxModeUs G.inp(G.998.4) support setting on upstream direction. The possible values are:
Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end… | column | Xdsl2ConfigRtxMode | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.45 |
| vdslLineConfGinpEtrMaxDs Defines the maximum allowed value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.46 |
| vdslLineConfGinpEtrMaxUs Defines the maximum allowed value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.47 |
| vdslLineConfGinpEtrMinDs Defines the minimum value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.48 |
| vdslLineConfGinpEtrMinUs Defines the minimum value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.49 |
| vdslLineConfIpqosProfile | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.5 |
| vdslLineConfGinpNdrMaxDs Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.50 |
| vdslLineConfGinpNdrMaxUs Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.51 |
| vdslLineConfGinpShineRatioDs The assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.52 |
| vdslLineConfGinpShineRatioUs The assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.53 |
| vdslLineConfGinpLeftrThresholdDs The rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.54 |
| vdslLineConfGinpLeftrThresholdUs The rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.55 |
| vdslLineConfGinpMaxDelayDs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.56 |
| vdslLineConfGinpMaxDelayUs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.57 |
| vdslLineConfGinpMinDelayDs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.58 |
| vdslLineConfGinpMinDelayUs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.59 |
| vdslLineConfVturInp This object is supported by R5.01 and later versions. | column | 0.1 DTM symbol Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.6 |
| vdslLineConfGinpInpMinDs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-31 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.60 |
| vdslLineConfGinpInpMinUs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-31 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.61 |
| vdslLineConfGinpReinCfgInpDs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.62 |
| vdslLineConfGinpReinCfgInpUs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.63 |
| vdslLineConfGinpReinCfgFreqDs G.inp-specific value that overrules the traffic configuration setting. Unit is Hz.
The possible values are:
100 - 100Hz
120 - 120Hz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.64 |
| vdslLineConfGinpReinCfgFreqUs G.inp-specific value that overrules the traffic configuration setting. Unit is Hz.
The possible values are:
100 - 100Hz
120 - 120Hz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.65 |
| vdslLineConfSosMinRateB0Ds This parameter specifies the minimum net data rate required for a valid SOS request
in the downstream direction. The value shall be coded as an unsigned integer representing
the… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.66 |
| vdslLineConfSosMinRateB0Us This parameter specifies the minimum net data rate required for a valid SOS request
in the upstream direction. The value shall be coded as an unsigned integer representing
the d… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.67 |
| vdslLineConfSosTimeDs The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2).
If the value of this parameter is not zero, the standard SOS triggering… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.68 |
| vdslLineConfVtucInp This object is supported by R5.01 and later versions. | column | 0.1 DTM symbol Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.7 |
| vdslLineConfSosCrcDs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds
in order to arm the second sub condition of the standard SOS triggerin… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.70 |
| vdslLineConfSosCrcUs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds
in order to arm the second sub condition of the standard SOS triggerin… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.71 |
| vdslLineConfSosNToneDs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be
degraded in order to arm the first sub-condition of the standard SOS trigge… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.72 |
| vdslLineConfSosNToneUs This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be
degraded in order to arm the first sub-condition of the standard SOS triggeri… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.73 |
| vdslLineConfSosMaxDs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures
in the downstream direction performed within a 120-second interva… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.74 |
| vdslLineConfSosMaxUs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures
in the upstream direction performed within a 120-second interval … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.75 |
| vdslLineConfRocEnableDs Enable the robust overhead channel.
disable(1),
enable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.78 |
| vdslLineConfRocEnableUs Enable the robust overhead channel.
disable(1),
enable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.79 |
| vdslLineConfOptionMask This object is supported by R5.01 and later versions.
Bit1: disable Trellis coding in ADSL mode
Bit2: disable Reed-Solomon coding for ADSL
Bit3: disable upstream bitswaps
Bit4: di… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.8 |
| vdslLineConfRocSnrmDs The parameter is defined as the SNR margin offset for the ROC channel in
the downstream direction. The parameter is used in the specification of the
channel initialization polic… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.80 |
| vdslLineConfRocSnrmUs The parameter is defined as the SNR margin offset for the ROC channel in
the upstream direction. The parameter is used in the specification of the
channel initialization policy … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.81 |
| vdslLineConfRocMinInpDs This parameter contains the minimum impulse noise protection to apply on the ROC
in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.82 |
| vdslLineConfRocMinInpUs This parameter contains the minimum impulse noise protection to apply on the ROC
in the upstream direction. The minimum impulse noise protection is an integer ranging from 0 to 1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.83 |
| vdslLineConfSosEnableDs Enable the emergency rate reduction.
disable(1),
enable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.84 |
| vdslLineConfSosEnableUs Enable the emergency rate reduction.
disable(1),
enable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.85 |
| vdslLineConfDynamicDepthDs Enable the dynamic change of interleave depth. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.86 |
| vdslLineConfDynamicDepthUs Enable the dynamic change of interleave depth. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.87 |
| vdslLineConfDpboParamType | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.88 |
| vdslLineConfDpboParamEselMin | column | 0.5 dB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.89 |
| vdslLineConfUpboForceLength -1 means auto electric length. This object is supported by R5.01 and later versions. | column | 0.1dB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.9 |
| vdslLineConfHsTxA43Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.90 |
| vdslLineConfHsTxB43Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.91 |
| vdslLineConfHsTxA43cB43cPsd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.92 |
| vdslLineConfHsTxV43Carrier257Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.93 |
| vdslLineConfHsTxV43Carrier383Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.94 |
| vdslLineConfHsTxV43Carrier511Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.95 |