QTECH-FRAME-RELAY-MIB Table View

Table of Frame Relay LMI information that are
either supplemental to the frDlcmiTable of RFC 1315
or specific to Qtech's implementation.

qtechfrLmiEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1

Each entry of the table contains information
of Frame Relay LMI over one physical interface.
They are mostly FR generic and some Qtech specific.

Indexes

No indexes recorded

Column	Syntax	OID
qtechfrLmiLinkstatus Data link status via LMI.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.1
qtechfrLmiLinkType Frame Relay link type.	Enumeration Enumerated Values: 1 dte 2 dce 3 nni	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.2
qtechfrLmiEnquiryIns Number of Status Enquiry messages received.	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.3
qtechfrLmiEnquiryOuts Number of Status Enquiry messages sent.	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.4
qtechfrLmiStatusIns Number of Status messages received.	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.5
qtechfrLmiStatusOuts Number of Status messages sent.	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.6
qtechfrLmiUpdateStatusIns Number of Update Status messages received.	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.7
qtechfrLmiUpdateStatusOuts Number of Update Status messages sent	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.8
qtechfrLmiStatusTimeouts Number of times when timeout occurred on waiting for Status message	timesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.9
qtechfrLmiStatusEnqTimeouts Number of times when timeout occurred on waiting for Status Enquiry message	timesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.10
qtechfrLmiN392Dce LMI error threshold for DCE interface. For DTE, value becomes 0.	Integer32 Constraints: range: 0-10	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.11
qtechfrLmiN393Dce LMI monitored event count for DCE interface. For DTE, value becomes zero (0).	Integer32 Constraints: range: 0-10	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.12
qtechfrLmiT392Dce DCE polling verification timer for DCE interface For DTE, the value becomes zero (0).	secondsInteger32 Constraints: range: 0-30	.1.3.6.1.4.1.27514.1.1.10.2.50.1.1.1.1.13

Table of descriptive and statistics information
that are generic to Frame Relay virtual circuits.

qtechfrCircuitEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.1.1

Each entry of the table contains information of a
circuit that are not included in frCircuitTable of
RFC1315 but are generic to Frame Relay.

Indexes

No indexes recorded

Column	Syntax	OID
qtechfrCircuitDEins Number of packets received with the Discarded Eligibility indictor (the DE bit) set.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.1.1.1
qtechfrCircuitDEouts Number of packets transmitted with DE bit set.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.1.1.2
qtechfrCircuitDropPktsOuts Number of discarded packets that were to be sent.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.1.1.3
qtechfrCircuitType Basic circuit type	Enumeration Enumerated Values: 1 pvc 2 svc	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.1.1.4

Table of Qtech implementation specific FR
circuit information. This is a Qtech extension
for the frCircuitTable of RFC 1315.

qtechfrExtCircuitEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1

Each entry of the table contains information
of a Frame Relay virtual circuit that are specific
to Qtech implementation.

Indexes

No indexes recorded

Column	Syntax	OID
qtechfrExtCircuitIfName The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all console displays, such as 'serial 0', 'serial…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.1
qtechfrExtCircuitIfType Type of the subinterface this DLCI is associated with, if configured.	Enumeration Enumerated Values: 1 mainInterface 2 pointToPoint 3 multipoint	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.2
qtechfrExtCircuitSubifIndex For value greater than zero (0), it indicates the network management interface index for the subinterface associated with this DLCI. Value 0 means the DLCI is not associated with any subinterface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.3
qtechfrExtCircuitMapStatus The mapping protocols (internally considered as the 'link type') applied on this circuit. The value ranges from 0 to 2047. For point-to-point DLCI, the value stays zero. Otherwise, the value is a sum. It initially takes…	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.4
qtechfrExtCircuitCreateType Identify the last source of the circuit's creation.	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.5
qtechfrExtCircuitMulticast Indicate if this DLCI is a multicast DLCI.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.6
qtechfrExtCircuitRoutedDlci The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI.	DlciNumber Type Constraints: range: 0..1023	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.7
qtechfrExtCircuitRoutedIf The interface for the routed DLCI that pairs up with this DLCI for switching. Value greater than 0 is the InterfaceIndex for that interface. Value zero (0) indicates that there is no such routed DLCI corresponding to th…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.8
qtechfrExtCircuitUncompressIns Number of inbound octets of the data packets, accounted at Frame Relay level after FRF.9 payload decompression is applied. In the case of non-FRF.9, this value could be identical to frCircuitReceivedOctets, unless other…	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.9
qtechfrExtCircuitUncompressOuts Number of outbound octets of the data packets, accounted at Frame Relay level before FRF.9 payload compression is applied. In the case of non-FRF.9, this value could be identical to frCircuitSentOctets, unless otherwise…	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.10
qtechfrExtCircuitFECNOuts Total number of frames sent out to the network indicating forward congestion.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.11
qtechfrExtCircuitBECNOuts Total number of frames sent out to the network indicating backward congestion.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.12
qtechfrExtCircuitMinThruputOut Circuit's outgoing minimal Throughput based on configuration.	bits per secondInteger32 Constraints: range: 9600-1544000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.13
qtechfrExtCircuitMinThruputIn Circuit's incoming minimal Throughput based on configuration.	bits per secondInteger32 Constraints: range: 9600-1544000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.14
qtechfrExtCircuitBcastPktOuts Total number of broadcast packets sent out to the network.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.15
qtechfrExtCircuitBcastByteOuts Total number of bytes sent out to the network in broadcast packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.16
qtechfrExtCircuitBandwidth Bandwidth of the virtual circuit, acquired from Qtech typed LMI Full Status message.	bits per secondInteger32 Constraints: range: 0-16777215	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.17
qtechfrExtCircuitShapeByteLimit Maximum number of tokens a token bucket can hold in any time interval in case of traffic shaping.	octetsInteger32 Constraints: range: 125-2147483647	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.18
qtechfrExtCircuitShapeInterval Committed rate measurement interval.	millisecondsInteger32 Constraints: range: 10-125	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.19
qtechfrExtCircuitShapeByteIncrement Number of tokens added into the token bucket per time interval in case of traffic shaping.	octetsInteger32 Constraints: range: 125-2147483647	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.20
qtechfrExtCircuitShapePkts Total number of packets that went through traffic shaping.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.21
qtechfrExtCircuitShapeBytes Total number of bytes that went through traffic shaping.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.22
qtechfrExtCircuitShapePktsDelay Total number of packets that were delayed by the traffic shaper.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.23
qtechfrExtCircuitShapeBytesDelay Total number of bytes that were delayed by the traffic shaper.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.24
qtechfrExtCircuitShapeActive Shows whether shaping is active or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.25
qtechfrExtCircuitShapeAdapting Type of Adaptive Shaping configured. none(1) - No adaptive shaping configured becn(2) - Backward Explicit Congestion Notification foreSight(3) - ForeSight is the network traffic control softwar…	Enumeration Enumerated Values: 1 none 2 becn 3 foreSight	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.26
qtechfrExtCircuitTxDataRate The average rate (bytes/second) at which data is transmitted in this circuit.	Integer32 Constraints: range: 1-45000000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.27
qtechfrExtCircuitTxPktRate The average number of packets sent in a second in this circuit.	Integer32 Constraints: range: 1-45000000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.28
qtechfrExtCircuitRcvDataRate The average rate (bytes/second) at which data is received in this circuit.	Integer32 Constraints: range: 1-45000000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.29
qtechfrExtCircuitRcvPktRate The average number of packets received in a second in this circuit.	Integer32 Constraints: range: 1-45000000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.30

Table of protocols and addresses mapping
information of FR virtual circuit.

qtechfrMapEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1

Each entry of the table contains one mapping
information of a Frame Relay virtual circuit.

Indexes

FRAME-RELAY-DTE-MIBfrCircuitIfIndex FRAME-RELAY-DTE-MIBfrCircuitDlci qtechfrMapIndex

Column	Syntax	OID
qtechfrMapIndex An arbitrary Index to the mapping information associated with a certain circuit. The maximum value is arbitrarily picked which is considered sufficient for usual configuration.	Integer32 Constraints: range: 1-999	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.1
qtechfrMapProtocol Mapping protocol for this circuit.	QtechfrMapProtocols Type Values: 1 arp 6 serialArp 7 ip 10 xns 11 novell 12 apollo 13 vines 16 appletalk 18 ieeeSpanning 22 decnet 25 clns 37 rsrb 38 bridge 39 stun 40 frArp 47 uncompressedTcp 48 compressedTcp 49 llc2 53 frSwitch 63 dlsw 74 nhrp 83 compressedRtp 999 wildcard	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.2
qtechfrMapAddress Mapping protocol address at remote end for this DLCI. NOTE: For point-to-point DLCI, the string is fixed to be point-to-point.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.3
qtechfrMapType Type for the map creation.	Enumeration Enumerated Values: 1 static 2 dynamic 3 svc	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.4
qtechfrMapEncaps Indication of the encapsulation type for this mapping protocol.	Enumeration Enumerated Values: 1 ietf 2 cisco	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.5
qtechfrMapBroadcast Broadcast enabled or disabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.6
qtechfrMapPayloadCompressdeprecated Indicate if payload compression is enabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.7
qtechfrMapTcpHdrCompress TCP header compression type, if applicable.	Enumeration Enumerated Values: 1 inapplicable 2 passive 3 active	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.8
qtechfrMapRtpHdrCompress RTP header compression type, if applicable. The value 'passive' means that the header of an outgoing RTP/IP packet is compressed only if an incoming RTP/IP packet had a compressed header. The value 'active' means the he…	Enumeration Enumerated Values: 1 inapplicable 2 passive 3 active	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.9
qtechfrMapPayloadCompressType FR payload compression type, if applicable. FRF.9 is the Frame Relay Forum Implementation Agreement on FR payload compression. The compression can be done by either software or hardware (when equipped with the supportin…	Enumeration Enumerated Values: 1 inapplicable 2 cisco 3 frf9Software 4 frf9Hardware	.1.3.6.1.4.1.27514.1.1.10.2.50.1.3.1.1.10

Table of FR SVC specific, descriptive
and statistics information.

qtechfrSvcEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1

Each entry of the table contains circuit information
specific to a Frame Relay Switched Virtual Circuit.

Indexes

FRAME-RELAY-DTE-MIBfrCircuitIfIndex FRAME-RELAY-DTE-MIBfrCircuitDlci

Column	Syntax	OID
qtechfrSvcAddrLocal Local E.164/X.125 address for the circuit.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1.1
qtechfrSvcAddrRemote Remote E.164/X.125 address for the circuit.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1.2
qtechfrSvcThroughputIn Circuit's incoming throughput. For outgoing throughput (commonly referred to as CIR) see frCircuitThroughput per RFC1315.	bits per secondInteger32 Constraints: range: 9600-1544000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1.3
qtechfrSvcMinThruputOutdeprecated Circuit's outgoing minimal Throughput.	bits per secondInteger32 Constraints: range: 9600-1544000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1.4
qtechfrSvcMinThruputIndeprecated Circuit's incoming minimal Throughput.	bits per secondInteger32 Constraints: range: 9600-1544000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1.5
qtechfrSvcCommitBurstIn Circuit's incoming Committed Burst Rate. See ANSI and/or ITU specifications for definition and calculations. For outgoing CBR, see frCircuitCommittedBurst per RFC 1315.	Integer32 Constraints: range: 9600-1544000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1.6
qtechfrSvcExcessBurstIn Circuit's incoming Excess Burst Rate. See ANSI and/or ITU specifications for definition and calculations. For outgoing EBR, see frCircuitExcessBurst per RFC 1315.	Integer32 Constraints: range: 9600-2440000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1.7
qtechfrSvcIdleTime Circuit's idle time period. If expires, the circuit is cleared.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.50.1.4.1.1.8

Table of QTECH Frame Relay ELMI information that is
specific to QTECH implementation

qtechfrElmiEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.5.2.1

Each entry of the table contains information about a
physical interface. The table can be accessible only
if the device supports ELMI protocol and if LMI is
enabled on the interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
qtechfrElmiLinkStatus This variable states whether Enhanced Link Management Interface(ELMI) protocol is enabled or not on a frame relay interface.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.2.1.1
qtechfrElmiArStatus This variable states whether the Enhanced Link Management Interface(ELMI) address registration(AR) mechanism is enabled or not on a frame relay interface. A value of 1 indicates ELMI AR is supported on the interface. …	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.2.1.2
qtechfrElmiRemoteStatus This variable states the Enhanced Link Management(ELMI) status on the other end of the interface. If cfrElmiLinkStatus is enabled on the other end a value of 1 will be returned, else 2 will be returned. This object doe…	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.2.1.3

Table of QTECH Frame Relay Neighbor ELMI information
that is specific to QTECH implementation.

qtechfrElmiNeighborEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.5.3.1

Each entry of the table contains information of the
neighboring device connected to a physical interface.
The entry will be present only if ELMI is enabled on
the neighboring device interface. If the value of the
qtechf…

Indexes

IF-MIBifIndex

Column	Syntax	OID
qtechfrElmiNeighborArStatus This variable indicates the status of ELMI Address registration(AR) on the neighboring device. A value of 1 indicates ELMI AR is not supported on the neighboring device. A value of 2 indicates ELMI AR is enabled on t…	Enumeration Enumerated Values: 1 notsupported 2 enabled 3 disabled	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.3.1.1
qtechfrElmiNeighborIpAddress The Management IP address of the neighboring device to which the other end of this interface is connected. Network management system can use this address to send management messages to the device. If address registrat…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.3.1.2
qtechfrElmiNeighborIfIndex The Interface index of the neighboring device to which this interface is connected. If the value of qtechfrElmiNeighborArStatus is 2 then this will have a valid value. If the value of qtechfrElmiNeighborArStatus is 3 o…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.3.1.3
qtechfrElmiNeighborVendorName Vendor name of the neighboring device to which the other end of this interface is connected.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.3.1.4
qtechfrElmiNeighborPlatformName Platform name of the neighboring device to which the other end of this interface is connected.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.3.1.5
qtechfrElmiNeighborDeviceName Device name of the neighboring device to which the other end of this interface is connected.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.5.3.1.6

Table of Frame Relay Fragmentation information. 
These are specific to Qtech's implementation.

qtechfrFragEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1

Each entry of the table contains details of
fragmentation configured on this circuit.

Indexes

FRAME-RELAY-DTE-MIBfrCircuitIfIndex FRAME-RELAY-DTE-MIBfrCircuitDlci

Column	Syntax	OID
qtechfrFragSize qtechfrFragSize defines the payload size of a fragment and it excludes the FR headers and any FR fragmentation header.	octetsInteger32 Constraints: range: 16-1600	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.1
qtechfrFragType Fragmentation type configured by the user. The types supported are end-to-end, VoFR-qtech and VoFR.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.2
qtechfrFragInPkts Total number of frames received that have a fragmentation header.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.3
qtechfrFragOutPkts Total number of fragments that are transmitted with a fragmenation header.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.4
qtechfrFragInOctets Total number of bytes received in frames that have a fragmentation header. The number of bytes include the FR header.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.5
qtechfrFragOutOctets Total number of bytes that are transmitted in frames with a fragmenation header. The number of bytes also includes the FR header.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.6
qtechfrFragNotInPkts Total number of frames received that do not require reassembly and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.7
qtechfrFragNotOutPkts Total number of frames transmitted without fragmenting and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.8
qtechfrFragNotInOctets Total number of bytes received in frames that do not require reassembly and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.9
qtechfrFragNotOutOctets Total number of bytes transmitted in frames that are not fragmented and therefore will not contain the fragmentation header. This counter is valid only when end-to-end fragmentation type is set.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.10
qtechfrFragAssembledInPkts Total number of fully reassembled frames. It also counts the number of packets received without FR fragmentation header (i.e. in un-fragmentated pkts).	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.11
qtechfrFragAssembledInOctets Total number of bytes received in fully reassembled frames. It also counts the number of packets received without FR fragmentation header (i.e.in un-fragmentated pkts).	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.12
qtechfrFragPreOutPkts Total number of frames fragmented and trasmitted. It also counts the number of packets trasmitted without FR fragmentation header (i.e. in un-fragmentated pkts).	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.13
qtechfrFragPreOutOctets Total number of bytes transmitted in fragmented frames. It also counts the number of bytes trasmitted in frames without FR fragmentation header (i.e. in un-fragmentated pkts).	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.14
qtechfrFragDroppedReAssembledInPkts Number of received fragments dropped for reasons such as : running out of memory, receiving segments out of sequence, receiving an unexpected frame with a B bit set, timing out on a reassembling frame.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.15
qtechfrFragDroppedFragmentedOutPkts Number of fragments dropped because of running out of memory.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.16
qtechfrFragTimeoutsIn Number of reassemble timer timeouts for this circuit. A frame requiring more than two minutes to fully reassemble is dropped and timeout will be incremented by one.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.17
qtechfrFragOutOfSeqFragPkts Indicates the total number of packets received with an unexpected sequence number. All fragments being reassembled are dropped. Start a new packet with the received segment only if the B bit is set on the segment. Oth…	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.18
qtechfrFragUnexpectedBBitSetPkts Number of fragments received in this circuit with a B bit set. All fragments being reassembled are dropped and a new packet is started with this segment.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.19
qtechfrFragSeqMissedPkts Number of fragments received in this circuit with skipped sequence number.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.20
qtechfrFragInterleavedOutPkts Number of packets that have been interleaved between segments.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.21

Table of Frame Relay/Frame Relay and Frame Relay/ATM
Network/Service Interworking connection information. 
These are specific to Qtech's implementation.

qtechfrConnectionEntry row .1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1

Each entry of the table contains information of a
connection that is established for Frame Relay/Frame
Relay and Frame Relay/ATM Network/Service Interworking.

Indexes

FRAME-RELAY-DTE-MIBfrCircuitIfIndex FRAME-RELAY-DTE-MIBfrCircuitDlci

Column	Syntax	OID
qtechfrConnName The textual name of a for FR/FR or FR/ATM Network/Service Interworking connection.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.1
qtechfrConnID The numerical identifier of a FR/FR or FR/ATM Network/Service Interworking connection.	Integer32 Constraints: range: 1-2000	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.2
qtechfrConnState Status of a FR/FR or FR/ATM Network/Service Interworking connection.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.3
qtechfrConnSegment1Name The textual name used to identify the first segment of a FR/FR or FR/ATM Network/Service Interworking connection.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.4
qtechfrConnSegment1VCGroup The textual name used to identify the VC-Group in the first segment of a Frame Relay/ATM Network Interworking (FRF.5)connection. This field is not applicabe in case of, FRF.8 (Frame Relay/ATM Service Interwo…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.5
qtechfrConnSegment1Dlci The DLCI used as the first segment of a FR-FR or FR-ATM Network/Service Interworking connection.	DlciNumber Type Constraints: range: 0..1023	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.6
qtechfrConnSegment2Name The interface on which second segment of a FR-FR or FR-ATM Network/Service Interworking connection is configured.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.7
qtechfrConnSegment2Vpi The value of VPI, in the ATM connection, used as the second segment of a FR-ATM Network/Service Interworking connection. In case of FR-FR connection, the same will be used to display the DLCI used as the second segme…	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.8
qtechfrConnSegment2Vci The value of VCI, in the ATM connection, used as the second segment of a FR-ATM Network/Service Interworking connection. In case of FR-FR connection, this is not supported.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.9
qtechfrConnServiceTranslation Shows whether Service Translation Mode is supported or not. Translation Mode is the interworking of internetworking (routed and/or bridged) protocols used in FR-ATM Service PVC Interworking(FRF.8). This is not suppor…	Enumeration Enumerated Values: 1 serviceTranslationEnabled 2 serviceTranslationNotEnabled	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.10
qtechfrConnFrSscsDlci The DLCI value used at the FR-SSCS layer. This is one of connection multiplexing methods used in Frame Relay/ATM Network Interworking. Not supported in case of FRF.8 (FR-ATM Service PVC Interworking) and FR-FR connec…	DlciNumber Type Constraints: range: 0..1023	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.11
qtechfrConnEfciBit Shows whether the FECN field in the FR frame is mapped to the ATM EFCI field of every cell generated out of the FR frame. This is used to indicate congestion in FR to ATM direction in case of Frame Relay/ATM Service …	Enumeration Enumerated Values: 1 mapFecn 2 notMapFecn	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.12
qtechfrConnDeBit The method of operation for loss priority mapping in the B-ISDN to FR direction.. Not supported in case of FR-FR connection.	Enumeration Enumerated Values: 1 noMapClp 2 mapClp 3 setDe0 4 setDe1	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.13
qtechfrConnClpBit The method of operation used to map loss priority mapping in the FR to ATM direction. Not supported in case of FR-FR connection.	Enumeration Enumerated Values: 1 setClpTo0AndCopyDeToFrsscsDe 2 setClpTo1AndCopyDeToFrsscsDe 3 copyDeToFrsscsDeAndClp 4 copyDeToClp 5 setClp1 6 setClp0	.1.3.6.1.4.1.27514.1.1.10.2.50.1.7.1.1.14