qtechfrExtCircuitCreateType

QTECH-FRAME-RELAY-MIB · .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.5
MIB view Table view

Object

column Enumeration 
Identify the last source of the circuit's creation.

Context

MIB
QTECH-FRAME-RELAY-MIB
OID
.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.5
Type
column
Access
readonly
Status
current
Parent
qtechfrExtCircuitEntry
Table
qtechfrExtCircuitTable
Siblings
29

Syntax

Enumeration

Values & Constraints

Enumerated Values
1dynamic
2static

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
qtechfrExtCircuitIfName
The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all conso…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.1
qtechfrExtCircuitUncompressOuts
Number of outbound octets of the data packets, accounted at Frame Relay level before FRF.9 payload compression is applied. In the case of non-FRF.9, this value could be identical …
columnoctets SNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.10
qtechfrExtCircuitFECNOuts
Total number of frames sent out to the network indicating forward congestion.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.11
qtechfrExtCircuitBECNOuts
Total number of frames sent out to the network indicating backward congestion.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.12
qtechfrExtCircuitMinThruputOut
Circuit's outgoing minimal Throughput based on configuration.
columnbits per second Integer32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.13
qtechfrExtCircuitMinThruputIn
Circuit's incoming minimal Throughput based on configuration.
columnbits per second Integer32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.14
qtechfrExtCircuitBcastPktOuts
Total number of broadcast packets sent out to the network.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.15
qtechfrExtCircuitBcastByteOuts
Total number of bytes sent out to the network in broadcast packets.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.16
qtechfrExtCircuitBandwidth
Bandwidth of the virtual circuit, acquired from Qtech typed LMI Full Status message.
columnbits per second Integer32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.17
qtechfrExtCircuitShapeByteLimit
Maximum number of tokens a token bucket can hold in any time interval in case of traffic shaping.
columnoctets Integer32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.18
qtechfrExtCircuitShapeInterval
Committed rate measurement interval.
columnmilliseconds Integer32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.19
qtechfrExtCircuitIfType
Type of the subinterface this DLCI is associated with, if configured.
columnEnumeration.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.2
qtechfrExtCircuitShapeByteIncrement
Number of tokens added into the token bucket per time interval in case of traffic shaping.
columnoctets Integer32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.20
qtechfrExtCircuitShapePkts
Total number of packets that went through traffic shaping.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.21
qtechfrExtCircuitShapeBytes
Total number of bytes that went through traffic shaping.
columnoctets SNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.22
qtechfrExtCircuitShapePktsDelay
Total number of packets that were delayed by the traffic shaper.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.23
qtechfrExtCircuitShapeBytesDelay
Total number of bytes that were delayed by the traffic shaper.
columnoctets SNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.24
qtechfrExtCircuitShapeActive
Shows whether shaping is active or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.25
qtechfrExtCircuitShapeAdapting
Type of Adaptive Shaping configured. none(1) - No adaptive shaping configured becn(2) - Backward Explicit Congestion Notification foreSight(3) - ForeSight is the network…
columnEnumeration.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.26
qtechfrExtCircuitTxDataRate
The average rate (bytes/second) at which data is transmitted in this circuit.
columnInteger32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.27
qtechfrExtCircuitTxPktRate
The average number of packets sent in a second in this circuit.
columnInteger32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.28
qtechfrExtCircuitRcvDataRate
The average rate (bytes/second) at which data is received in this circuit.
columnInteger32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.29
qtechfrExtCircuitSubifIndex
For value greater than zero (0), it indicates the network management interface index for the subinterface associated with this DLCI. Value 0 means the DLCI is not associated with …
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.3
qtechfrExtCircuitRcvPktRate
The average number of packets received in a second in this circuit.
columnInteger32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.30
qtechfrExtCircuitMapStatus
The mapping protocols (internally considered as the 'link type') applied on this circuit. The value ranges from 0 to 2047. For point-to-point DLCI, the value stays zero. Otherwise…
columnInteger32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.4
qtechfrExtCircuitMulticast
Indicate if this DLCI is a multicast DLCI.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.6
qtechfrExtCircuitRoutedDlci
The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI.
columnDlciNumber.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.7
qtechfrExtCircuitRoutedIf
The interface for the routed DLCI that pairs up with this DLCI for switching. Value greater than 0 is the InterfaceIndex for that interface. Value zero (0) indicates that there is…
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.8
qtechfrExtCircuitUncompressIns
Number of inbound octets of the data packets, accounted at Frame Relay level after FRF.9 payload decompression is applied. In the case of non-FRF.9, this value could be identical …
columnoctets SNMPv2-SMICounter32.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.9