qtechfrExtCircuitIfName
QTECH-FRAME-RELAY-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.1
Object
column
SNMPv2-TCDisplayString
The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all console displays, such as 'serial 0', 'serial 3/0.3', etc.
Context
- MIB
- QTECH-FRAME-RELAY-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- qtechfrExtCircuitEntry
- Table
- qtechfrExtCircuitTable
- Siblings
- 29
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechfrExtCircuitUncompressOuts Number of outbound octets of the data packets,
accounted at Frame Relay level before FRF.9
payload compression is applied. In the case of
non-FRF.9, this value could be identical … | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.10 |
| qtechfrExtCircuitFECNOuts Total number of frames sent out to the network
indicating forward congestion. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.11 |
| qtechfrExtCircuitBECNOuts Total number of frames sent out to the network
indicating backward congestion. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.12 |
| qtechfrExtCircuitMinThruputOut Circuit's outgoing minimal Throughput based on
configuration. | column | bits per second Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.13 |
| qtechfrExtCircuitMinThruputIn Circuit's incoming minimal Throughput based on
configuration. | column | bits per second Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.14 |
| qtechfrExtCircuitBcastPktOuts Total number of broadcast packets sent out to the
network. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.15 |
| qtechfrExtCircuitBcastByteOuts Total number of bytes sent out to the network in
broadcast packets. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.16 |
| qtechfrExtCircuitBandwidth Bandwidth of the virtual circuit, acquired from
Qtech typed LMI Full Status message. | column | bits per second Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.17 |
| qtechfrExtCircuitShapeByteLimit Maximum number of tokens a token bucket can hold in any
time interval in case of traffic shaping. | column | octets Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.18 |
| qtechfrExtCircuitShapeInterval Committed rate measurement interval. | column | milliseconds Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.19 |
| qtechfrExtCircuitIfType Type of the subinterface this DLCI is associated
with, if configured. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.2 |
| qtechfrExtCircuitShapeByteIncrement Number of tokens added into the token bucket per time
interval in case of traffic shaping. | column | octets Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.20 |
| qtechfrExtCircuitShapePkts Total number of packets that went through traffic
shaping. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.21 |
| qtechfrExtCircuitShapeBytes Total number of bytes that went through traffic
shaping. | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.22 |
| qtechfrExtCircuitShapePktsDelay Total number of packets that were delayed by the
traffic shaper. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.23 |
| qtechfrExtCircuitShapeBytesDelay Total number of bytes that were delayed by the
traffic shaper. | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.24 |
| qtechfrExtCircuitShapeActive Shows whether shaping is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.25 |
| qtechfrExtCircuitShapeAdapting Type of Adaptive Shaping configured.
none(1) - No adaptive shaping configured
becn(2) - Backward Explicit Congestion Notification
foreSight(3) - ForeSight is the network… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.26 |
| qtechfrExtCircuitTxDataRate The average rate (bytes/second) at which data is
transmitted in this circuit. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.27 |
| qtechfrExtCircuitTxPktRate The average number of packets sent in a second in this
circuit. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.28 |
| qtechfrExtCircuitRcvDataRate The average rate (bytes/second) at which data is
received in this circuit. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.29 |
| qtechfrExtCircuitSubifIndex For value greater than zero (0), it indicates
the network management interface index
for the subinterface associated with
this DLCI. Value 0 means the DLCI is not
associated with … | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.3 |
| qtechfrExtCircuitRcvPktRate The average number of packets received in a second in
this circuit. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.30 |
| qtechfrExtCircuitMapStatus The mapping protocols (internally considered as
the 'link type') applied on this circuit.
The value ranges from 0 to 2047.
For point-to-point DLCI, the value stays zero.
Otherwise… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.4 |
| qtechfrExtCircuitCreateType Identify the last source of the circuit's creation. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.5 |
| qtechfrExtCircuitMulticast Indicate if this DLCI is a multicast DLCI. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.6 |
| qtechfrExtCircuitRoutedDlci The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI. | column | DlciNumber | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.7 |
| qtechfrExtCircuitRoutedIf The interface for the routed DLCI that pairs up
with this DLCI for switching. Value greater than 0
is the InterfaceIndex for that interface. Value
zero (0) indicates that there is… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.8 |
| qtechfrExtCircuitUncompressIns Number of inbound octets of the data packets,
accounted at Frame Relay level after FRF.9
payload decompression is applied. In the case of
non-FRF.9, this value could be identical … | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.2.2.1.9 |