qtechfrFragDroppedReAssembledInPkts
QTECH-FRAME-RELAY-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.15
Object
Number of received fragments dropped for reasons such as : running out of memory, receiving segments out of sequence, receiving an unexpected frame with a B bit set, timing out on a reassembling frame.
Context
- MIB
- QTECH-FRAME-RELAY-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Units
- packets
- Parent
- qtechfrFragEntry
- Table
- qtechfrFragTable
- Siblings
- 20
Syntax
packets SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechfrFragSize qtechfrFragSize defines the payload size of a fragment
and it excludes the FR headers and any FR fragmentation
header. | column | octets Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.1 |
| qtechfrFragNotOutOctets Total number of bytes transmitted in frames that are
not fragmented and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragmenta… | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.10 |
| qtechfrFragAssembledInPkts Total number of fully reassembled frames. It also
counts the number of packets received without FR
fragmentation header (i.e. in un-fragmentated pkts). | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.11 |
| qtechfrFragAssembledInOctets Total number of bytes received in fully reassembled
frames. It also counts the number of packets received
without FR fragmentation header (i.e.in un-fragmentated
pkts). | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.12 |
| qtechfrFragPreOutPkts Total number of frames fragmented and trasmitted. It
also counts the number of packets trasmitted without FR
fragmentation header (i.e. in un-fragmentated pkts). | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.13 |
| qtechfrFragPreOutOctets Total number of bytes transmitted in fragmented frames.
It also counts the number of bytes trasmitted in frames
without FR fragmentation header (i.e. in un-fragmentated
pkts). | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.14 |
| qtechfrFragDroppedFragmentedOutPkts Number of fragments dropped because of running
out of memory. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.16 |
| qtechfrFragTimeoutsIn Number of reassemble timer timeouts for this circuit.
A frame requiring more than two minutes to fully
reassemble is dropped and timeout will be incremented
by one. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.17 |
| qtechfrFragOutOfSeqFragPkts Indicates the total number of packets received with an
unexpected sequence number. All fragments being
reassembled are dropped. Start a new packet with the
received segment only … | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.18 |
| qtechfrFragUnexpectedBBitSetPkts Number of fragments received in this circuit with
a B bit set. All fragments being reassembled are dropped
and a new packet is started with this segment. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.19 |
| qtechfrFragType Fragmentation type configured by the user. The types
supported are end-to-end, VoFR-qtech and VoFR. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.2 |
| qtechfrFragSeqMissedPkts Number of fragments received in this circuit with
skipped sequence number. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.20 |
| qtechfrFragInterleavedOutPkts Number of packets that have been interleaved between
segments. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.21 |
| qtechfrFragInPkts Total number of frames received that have a
fragmentation header. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.3 |
| qtechfrFragOutPkts Total number of fragments that are transmitted with a
fragmenation header. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.4 |
| qtechfrFragInOctets Total number of bytes received in frames that have a
fragmentation header. The number of bytes include the
FR header. | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.5 |
| qtechfrFragOutOctets Total number of bytes that are transmitted in frames
with a fragmenation header. The number of bytes also
includes the FR header. | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.6 |
| qtechfrFragNotInPkts Total number of frames received that do not require
reassembly and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragmentation … | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.7 |
| qtechfrFragNotOutPkts Total number of frames transmitted without fragmenting
and therefore will not contain the fragmentation header.
This counter is valid only when end-to-end fragmentation
type is se… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.8 |
| qtechfrFragNotInOctets Total number of bytes received in frames that do not
require reassembly and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragm… | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.50.1.6.1.1.9 |