Standard view Table view

FRAME-RELAY-DTE-MIB

        The MIB module to describe the use of a Frame Relay
interface by a DTE.
Source file
FRAME-RELAY-DTE-MIB
Last revised
Identity
frameRelayDTE
Base OID
1.3.6.1.2.1.10.32
Imported Objects
IF-MIB InterfaceIndex
RFC1213-MIB transmission
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC RowStatus TEXTUAL-CONVENTION TimeStamp
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'FRAME-RELAY-DTE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'FRAME-RELAY-DTE-MIB::frameRelayDTE'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FRAME-RELAY-DTE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FRAME-RELAY-DTE-MIB::frameRelayDTE'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (53)
frameRelayDTE
.1.3.6.1.2.1.10.32
frameRelayTraps
.1.3.6.1.2.1.10.32.0
frDlcmiTable
.1.3.6.1.2.1.10.32.1
frDlcmiEntry
frDlcmiIfIndex
 .1.3.6.1.2.1.10.32.1.1
frDlcmiIfIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.32.1.1.1
frDlcmiMulticast r/w
Enumeration
 .1.3.6.1.2.1.10.32.1.1.10
frDlcmiStatus
Enumeration
 .1.3.6.1.2.1.10.32.1.1.11
frDlcmiRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.10.32.1.1.12
frDlcmiState r/w
Enumeration
 .1.3.6.1.2.1.10.32.1.1.2
frDlcmiAddress r/w
Enumeration
 .1.3.6.1.2.1.10.32.1.1.3
frDlcmiAddressLen r/w
Enumeration
 .1.3.6.1.2.1.10.32.1.1.4
frDlcmiPollingInterval r/w
secondsInteger32
 .1.3.6.1.2.1.10.32.1.1.5
frDlcmiFullEnquiryInterval r/w
Integer32
 .1.3.6.1.2.1.10.32.1.1.6
frDlcmiErrorThreshold r/w
Integer32
 .1.3.6.1.2.1.10.32.1.1.7
frDlcmiMonitoredEvents r/w
Integer32
 .1.3.6.1.2.1.10.32.1.1.8
frDlcmiMaxSupportedVCs r/w
DLCI
 .1.3.6.1.2.1.10.32.1.1.9
frCircuitTable
.1.3.6.1.2.1.10.32.2
frCircuitEntry
frCircuitIfIndexfrCircuitDlci
 .1.3.6.1.2.1.10.32.2.1
frCircuitIfIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.32.2.1.1
frCircuitCreationTime
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.10.32.2.1.10
frCircuitLastTimeChange
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.10.32.2.1.11
frCircuitCommittedBurst r/w
Integer32
 .1.3.6.1.2.1.10.32.2.1.12
frCircuitExcessBurst r/w
Integer32
 .1.3.6.1.2.1.10.32.2.1.13
frCircuitThroughput r/w
Integer32
 .1.3.6.1.2.1.10.32.2.1.14
frCircuitMulticast r/w
Enumeration
 .1.3.6.1.2.1.10.32.2.1.15
frCircuitType
Enumeration
 .1.3.6.1.2.1.10.32.2.1.16
frCircuitDiscards
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.17
frCircuitReceivedDEs
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.18
frCircuitSentDEs
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.19
frCircuitDlci
DLCI
 .1.3.6.1.2.1.10.32.2.1.2
frCircuitLogicalIfIndex r/w
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.32.2.1.20
frCircuitRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.10.32.2.1.21
frCircuitState r/w
Enumeration
 .1.3.6.1.2.1.10.32.2.1.3
frCircuitReceivedFECNs
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.4
frCircuitReceivedBECNs
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.5
frCircuitSentFrames
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.6
frCircuitSentOctets
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.7
frCircuitReceivedFrames
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.8
frCircuitReceivedOctets
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.2.1.9
frErrTable
.1.3.6.1.2.1.10.32.3
frErrEntry
frErrIfIndex
 .1.3.6.1.2.1.10.32.3.1
frErrIfIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.32.3.1.1
frErrType
Enumeration
 .1.3.6.1.2.1.10.32.3.1.2
frErrData
OctetString
 .1.3.6.1.2.1.10.32.3.1.3
frErrTime
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.10.32.3.1.4
frErrFaults
SNMPv2-SMICounter32
 .1.3.6.1.2.1.10.32.3.1.5
frErrFaultTime
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.10.32.3.1.6
frameRelayTrapControl
.1.3.6.1.2.1.10.32.4
frTrapState r/w
Enumeration
 .1.3.6.1.2.1.10.32.4.1
frTrapMaxRate r/w
Integer32
 .1.3.6.1.2.1.10.32.4.2
frConformance
.1.3.6.1.2.1.10.32.6
frGroups
.1.3.6.1.2.1.10.32.6.1
frCompliances
.1.3.6.1.2.1.10.32.6.2
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. RFC-1212rfc
  8. RFC1155-SMIrfc
  9. RFC1213-MIBrfc
  10. FRAME-RELAY-DTE-MIBrfcselected
Type Definitions (1)
DLCI
Integer32 range: 0..8388607
Conformance Groups (9)
frPortGroup
frDlcmiIfIndex frDlcmiState frDlcmiAddress frDlcmiAddressLen frDlcmiPollingInterval frDlcmiFullEnquiryInterval frDlcmiErrorThreshold frDlcmiMonitoredEvents frDlcmiMaxSupportedVCs frDlcmiMulticast frDlcmiStatus frDlcmiRowStatus
The objects necessary to control the Link Management
Interface for a Frame Relay Interface as well as
maintain the error statistics on this interface.
 .1.3.6.1.2.1.10.32.6.1.1
frCircuitGroup
frCircuitIfIndex frCircuitDlci frCircuitState frCircuitReceivedFECNs frCircuitReceivedBECNs frCircuitSentFrames frCircuitSentOctets frCircuitReceivedFrames frCircuitReceivedOctets frCircuitCreationTime frCircuitLastTimeChange frCircuitCommittedBurst frCircuitExcessBurst frCircuitThroughput frCircuitMulticast frCircuitType frCircuitDiscards frCircuitReceivedDEs frCircuitSentDEs frCircuitLogicalIfIndex frCircuitRowStatus
The objects necessary to control the Virtual Circuits
layered onto a Frame Relay Interface.
 .1.3.6.1.2.1.10.32.6.1.2
frTrapGroup
frTrapState frTrapMaxRate
The objects necessary to control a Frame Relay
Interface's notification messages.
 .1.3.6.1.2.1.10.32.6.1.3
frErrGroup
frErrIfIndex frErrType frErrData frErrTime frErrFaults frErrFaultTime
Objects designed to assist in debugging Frame Relay
Interfaces.
 .1.3.6.1.2.1.10.32.6.1.4
frNotificationGroup
frDLCIStatusChange
Traps which may be used to enhance event driven
management of the interface.
 .1.3.6.1.2.1.10.32.6.1.5
frPortGroup0
frDlcmiIfIndex frDlcmiState frDlcmiAddress frDlcmiAddressLen frDlcmiPollingInterval frDlcmiFullEnquiryInterval frDlcmiErrorThreshold frDlcmiMonitoredEvents frDlcmiMaxSupportedVCs frDlcmiMulticast
The objects necessary to control the Link Management
Interface for a Frame Relay Interface as well as
maintain the error statistics on this interface from
RFC 1315.
 .1.3.6.1.2.1.10.32.6.1.6
frCircuitGroup0
frCircuitIfIndex frCircuitDlci frCircuitState frCircuitReceivedFECNs frCircuitReceivedBECNs frCircuitSentFrames frCircuitSentOctets frCircuitReceivedFrames frCircuitReceivedOctets frCircuitCreationTime frCircuitLastTimeChange frCircuitCommittedBurst frCircuitExcessBurst frCircuitThroughput
The objects necessary to control the Virtual Circuits
layered onto a Frame Relay Interface from RFC 1315.
 .1.3.6.1.2.1.10.32.6.1.7
frErrGroup0
frErrIfIndex frErrType frErrData frErrTime
Objects designed to assist in debugging Frame Relay
Interfaces from RFC 1315.
 .1.3.6.1.2.1.10.32.6.1.8
frTrapGroup0
frTrapState
The objects necessary to control a Frame Relay
Interface's notification messages from RFC 1315.
 .1.3.6.1.2.1.10.32.6.1.9
Compliance Statements (2)

OID .1.3.6.1.2.1.10.32.6.2.1
The compliance statement
Required groups
mandatory frPortGroup
mandatory frCircuitGroup
optional frErrGroup This optional group is used for debugging Frame Relay
Systems.
optional frTrapGroup This optional group is used for the management of
asynchronous notifications by Frame Relay Systems.
optional frNotificationGroup This optional group defines the asynchronous
notifications generated by Frame Relay Systems.
Object refinements
ObjectAccessSyntaxDescription
frDlcmiRowStatus readonly
Row creation is not required for the frDlcmiTable.
frCircuitRowStatus readonly
Row creation is not required for the frCircuitTable.

OID .1.3.6.1.2.1.10.32.6.2.2
The compliance statement for objects and the trap
defined in RFC 1315.
Required groups
mandatory frPortGroup0
mandatory frCircuitGroup0
optional frErrGroup0 This optional group is used for debugging Frame Relay
Systems.
optional frTrapGroup0 This optional group is used for the management of
asynchronous notifications by Frame Relay Systems.
optional frNotificationGroup This optional group defines the asynchronous
notifications generated by Frame Relay Systems.
Notifications / Traps (1)
NameOIDDescription
frDLCIStatusChange
frCircuitState
.1.3.6.1.2.1.10.32.0.1
This trap indicates that the indicated Virtual Circuit
has changed state. It has either been created or
invalidated, or has toggled between the active and
inactive states. If, however, the reason for the state
change is due to the DLCMI going down, per-DLCI traps
should not be generated.