LUM-MPLS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
108
mplsIfTable
table.1.3.6.1.4.1.8708.2.40.2.2.1
·
1 row entry
·
17 columns
The MPLS interface list.
An entry in the mpls interface list.
Indexes
mplsIfIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsIfIndex
An arbitrary index assigned to each entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.1 |
||||||||||||
|
mplsIfName
The management name of the interface, for example
'if:1:2:myIdentifier', where the first number indicates subrack and the second slot number. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.2 |
||||||||||||
|
mplsIfSubrack
The subrack of the physical port that this interface is
bound to. |
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.3 |
||||||||||||
|
mplsIfSlot
The slot of the physical port that this interface is
bound to. |
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.4 |
||||||||||||
|
mplsIfTxPort
The transmitting physical port that this interface is
bound to. |
LUM-TCPortNumberr/w Textual Convention: LUM-TCPortNumber Unsigned32Type Constraints: range: 0..116 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.5 |
||||||||||||
|
mplsIfPortIndex
The index of the port or lag that this interface is bound to.
|
Unsigned32r/w Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.6 |
||||||||||||
|
mplsIfPortName
Name of the port or lag that this interface is bound to.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.7 |
||||||||||||
|
mplsIfInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.8 |
||||||||||||
|
mplsIfAdminStatus
The administrative state of the MPLS interface.
down - The interface is de-activated. up - The interface is activated. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.40.2.2.1.1.9 |
||||||||||||
|
mplsIfIdentifier
A unique identifier for the MPLS interface.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.10 |
||||||||||||
|
mplsIfNextHopMacAddress
The unicast or valid multicast (01:00:5E:90:00:00)
MAC address used for sending MPLS packets on the interface. A configured next hop MAC Address on an interface will be used as the next hop MAC address for any cross-con… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.11 |
||||||||||||
|
mplsIfInterfaceMacAddress
The unicast MAC address used for receiving MPLS packets
on the interface. If no interface MAC address is defined, the predefined MAC address for the physical port will be used. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.12 |
||||||||||||
|
mplsIfVlan
The backbone VLAN id used when transmitting and
receiving MPLS packets on the interface. |
Unsigned32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.13 |
||||||||||||
|
mplsIfRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.40.2.2.1.1.14 |
||||||||||||
|
mplsIfIfNo
The physical interface number of the multi-connector port.
|
LUM-TCPortNumberr/w Textual Convention: LUM-TCPortNumber Unsigned32Type Constraints: range: 0..116 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.15 |
||||||||||||
|
mplsIfResourceType
The type of resource the Mpls If is created on.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.40.2.2.1.1.16 |
||||||||||||
|
mplsIfLagId
The identifier of the LAG for Mpls If.
An empty string means no Mpls interface on LAG. |
LUM-TCMgmtNameStringr/w Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.2.1.1.17 |
mplsXCTable
table.1.3.6.1.4.1.8708.2.40.2.3.1
·
1 row entry
·
11 columns
This table specifies information for associating in and out segments together in order to form a cross-connect.
An entry in the MPLS cross-connect list.
There are two special cases for LERs:
1. LSPs originated at this LSR:
These are represented by using the value zero for
inSegmentIfIndex.
…
There are two special cases for LERs:
1. LSPs originated at this LSR:
These are represented by using the value zero for
inSegmentIfIndex.
…
Indexes
mplsXCIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsXCIndex
An arbitrary index assigned to each entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.1 |
||||||||||||
|
mplsXCName
The management name of the entry, for example
'xc:1:2:myIdentifier', where the first number indicates subrack, the second slot number. 'myIdentifier' is the unique identifier specified by mplsXCIdentifier. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.2 |
||||||||||||
|
mplsXCInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.3 |
||||||||||||
|
mplsXCIdentifier
A unique identifier for the cross-connect object.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.4 |
||||||||||||
|
mplsXCInSegmentIfIndex
Index of the incoming MPLS interface.
The value zero indicates a special case (LER) outlined in the table description. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.5 |
||||||||||||
|
mplsXCInSegmentIfName
Name of the incoming segment.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.6 |
||||||||||||
|
mplsXCInSegmentLabel
The MPLS label for the incoming traffic.
Actual label range is 16-1048575, 0-15 is reserved. |
LUM-TCMplsLabelr/w Textual Convention: LUM-TCMplsLabel Unsigned32Type Constraints: range: 0..1048575 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.7 |
||||||||||||
|
mplsXCOutSegmentIfIndex
Index of the outgoing MPLS interface.
The value zero indicates a special case (LER) outlined in the table description. |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.8 |
||||||||||||
|
mplsXCOutSegmentIfName
Name of the outgoing segment.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.9 |
||||||||||||
|
mplsXCOutSegmentLabel
The MPLS label for the outgoing traffic.
Actual label range is 16-1048575, 0-15 is reserved. |
LUM-TCMplsLabelr/w Textual Convention: LUM-TCMplsLabel Unsigned32Type Constraints: range: 0..1048575 |
.1.3.6.1.4.1.8708.2.40.2.3.1.1.10 |
||||||||||||
|
mplsXCRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.40.2.3.1.1.11 |
mplsTunnelTable
table.1.3.6.1.4.1.8708.2.40.2.4.1
·
1 row entry
·
24 columns
The MPLS tunnel list.
An entry in the MPLS tunnel list.
Indexes
mplsTunnelIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsTunnelIndex
An arbitrary index assigned to each entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.1 |
||||||||||||
|
mplsTunnelInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.2 |
||||||||||||
|
mplsTunnelIdentifier
Unique identifier used for referencing this object.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.3 |
||||||||||||
|
mplsTunnelName
The management name of the entry, for example
'tunnel:1:2:id', where the first number indicates subrack, the second slot number and the id is the unique tunnel identifier. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.4 |
||||||||||||
|
mplsTunnelActiveLSP
ID of the associated LSP that is active, if exists.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.5 |
||||||||||||
|
mplsTunnelActiveLspIndex
The index of the associated LSP that is active,
if exists. |
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.6 |
||||||||||||
|
mplsTunnelState
Indicates the state of the tunnel.
down (1) -- The tunnel is de-actived or unavailable to carry any traffic. up (2) -- The tunnel is active and ready to carry traffic. unknown (3) -- The tunnel status … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.8708.2.40.2.4.1.1.7 |
||||||||||||
|
mplsTunnelSrcNodeId
The ID of the source node, i.e. the node where this
tunnel originates. Used for externally uniquely identifying the tunnel in the standardized format, '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]- [Dest. Global ID]:[D… |
Unsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.8 |
||||||||||||
|
mplsTunnelSrcTunnelId
The source node MPLS-TP tunnel ID of this tunnel.
Used for externally uniquely identifying the tunnel in the standardized format, '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]- [Dest. Global ID]:[Dest. Node ID]:[Dest. … |
MplsIdentifierr/w Textual Convention: MplsIdentifier Unsigned32Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.9 |
||||||||||||
|
mplsTunnelDestNodeId
The ID of the destination node, i.e. the node
where this tunnel terminates. Used for externally uniquely identifying the tunnel in the standardized format, '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]- [Dest. Global I… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.10 |
||||||||||||
|
mplsTunnelDestTunnelId
The destination node MPLS-TP tunnel ID of the tunnel.
Used for externally uniquely identifying the tunnel in the standardized format, '[Src global ID]:[Src node ID]:[Src tunnel ID]- [Dest. global ID]:[Dest. node ID]:[De… |
MplsIdentifierr/w Textual Convention: MplsIdentifier Unsigned32Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.11 |
||||||||||||
|
mplsTunnelExtId
The global ID of the tunnel, used for externally
uniquely identifying the tunnel in the standardized format, '[Src global ID]:[Src node ID]:[Src tunnel ID]- [Dest. global ID]:[Dest. node ID]:[Dest. tunnel ID]'. An empty… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.12 |
||||||||||||
|
mplsTunnelAssociateLSP
Internal command for mapping a new LSP to the tunnel.
The first LSP associated to the tunnel will be the primary path and the additional LSPs will be the protection path. Identifier -- the tunnel which th… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.13 |
||||||||||||
|
mplsTunnelRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.40.2.4.1.1.14 |
||||||||||||
|
mplsTunnelLinearProtection
The linear protection profile applied to the tunnel.
Protection state coordination (PSC) protocol is used for linear protection. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.15 |
||||||||||||
|
mplsTunnelProtectionState
Status of the linear protection that applied to the tunnel
fullyworking (1) -- both protection and working path are fully active degraded (2) -- service degraded on the protection domain failed (3) -- failure … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.8708.2.40.2.4.1.1.16 |
||||||||||||
|
mplsTunnelAssociateLinearProt
Internal command for create and associate a PSC
(Protection State Coordination) protocol for linear protection of the tunnel. Only supported 1:1 protection architecture: a protection transport path is dedicated to the w… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.17 |
||||||||||||
|
mplsTunnelGlobalId
This object allows the administrator to assign a unique
operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octet or 4-octet value of the operators Autonomous System Number… |
Unsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.18 |
||||||||||||
|
mplsTunnelDestGlobalId
This object allows the administrator to assign a unique
operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octet or 4-octet value of the operators Autonomous System Number… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.19 |
||||||||||||
|
mplsTunnelWorkingLSP
Identifier of the working path of the linear protection.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.20 |
||||||||||||
|
mplsTunnelProtectionLSP
Identifier of the protection path of the linear protection.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.21 |
||||||||||||
|
mplsTunnelReservedBW
Bandwidth reserved by the tunnel.
Default value is 0 and indicates that no bandwidth has been allocated by the tunnel. |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.22 |
||||||||||||
|
mplsTunnelBookedBW
The total amount of bandwidth booked by pseudowires in the tunnel.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.23 |
||||||||||||
|
mplsTunnelDescr
User configurable label.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.4.1.1.24 |
mplsNodeTable
table.1.3.6.1.4.1.8708.2.40.2.5.1
·
1 row entry
·
25 columns
The MPLS node list. Each individual board that supports MPLS node is considered a MPLS node.
An entry in the MPLS node list.
Indexes
mplsNodeIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
mplsNodeIndex
An arbitrary index assigned to each entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.1 |
||||
|
mplsNodeName
The management name of the interface, for example
'node:1:2', where the first number indicates subrack, the second slot number. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.2 |
||||
|
mplsNodeSubrack
The subrack that this MPLS node belongs to.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.3 |
||||
|
mplsNodeSlot
The slot that this MPLS node belongs to.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.4 |
||||
|
mplsNodeIccIdStr
Unique code assigned to the network operator or
service provider maintained by ITU-T. The ITU carrier code used to form a globally unique node ID for non IP environments. |
OctetStringr/w Constraints: range: 1-6 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.5 |
||||
|
mplsNodeIdNum
Unique node ID / router ID assigned with in the scope
of the network of the operator / service provider, defined by the ICC ID. This value is unique and only valid for this board. Accepted values are 0.0.0.0 - 255.255.2… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.6 |
||||
|
mplsNodeCreateXC
Internal command for creating a XC entry.
In-segment name - Name of the incoming segment. In-segment label - The MPLS label for the incoming traffic. Out-segment name - Name of the outgoing segme… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.7 |
||||
|
mplsNodeCreateTunnel
Identifier - Unique tunnel ID used when referencing
the tunnel within the node. MPLS-TP ID - Set the standard MPLS-TP ID for the tunnel on the format: '<Source … |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.8 |
||||
|
mplsNodeCreateLsp
Internal command for creating a bidirectional LSP entry.
Identifier - Unique LSP ID used when referencing the LSP within the node. Role - Defines whether the LSP is terminated/… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.9 |
||||
|
mplsNodeCreatePw
Pseudowire ID - Unique pseudowire ID used when referencing
the pseudowire within the node. Pseudowire type - Edge pseudowire connects to a singel tunnel while a multi-segmen… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.10 |
||||
|
mplsNodeCreateIf
Internal command for creating an interface.
Identifier - Unique MPLS interface ID used when referencing the interface within the node. Admin Status - Defines whether the interface shall be active … |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.11 |
||||
|
mplsNodeLinearProtMode
The mode of the protection domain, configured for all MPLS linear
protection service on the board. nonRevertive (1) -- non-revertive mode revertive (2) -- revertive mode |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.40.2.5.1.1.12 |
||||
|
mplsNodeLinearProtWtrTimer
The wait-to-restore (WTR) timer configured for all MPLS linear
protection service on the board. A WTR timer is used to delay reversion to Normal state when recovering from a failure condition on the working path and the… |
Unsigned32r/w Constraints: range: 1-720 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.13 |
||||
|
mplsNodeLPContMsgInterval
In linear protection domain, the control message is transmitted over
the protection path only. Subsequent messages are continuously transmitted to verify that the session is alive. If no valid control message is receive… |
Unsigned32r/w Constraints: range: 1-30 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.14 |
||||
|
mplsNodeLPRapidMsgInterval
In linear protection domain, when the state of the protection domain
is changed, three control messages shall be transmitted as quickly as possible to allow for rapid protection switching. After the transmission of the … |
Unsigned32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.15 |
||||
|
mplsNodeGlobalId
This object allows the administrator to assign a unique
operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octet or 4-octet value of the operators Autonomous System Number… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.16 |
||||
|
mplsNodeCreateMsPw
Internal command for creating a multi-segment pseudowire.
Identifier - Unique pseudowire ID used when referencing the pseudowire within the node. East outlabel - Pseudowire label appended to outgoi… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.17 |
||||
|
mplsNodeCreateLsp2
Internal command for creating a bidirectional LSP entry.
Identifier - Unique LSP ID used when referencing the LSP within the node. Role - Defines whether the LSP is terminated/… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.18 |
||||
|
mplsNodeCreateTunnelAdvanced
Identifier - Unique tunnel ID used when referencing
the tunnel within the node. MPLS-TP ID - Set the standard MPLS-TP ID for the tunnel on the format: '<Source … |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.19 |
||||
|
mplsNodeCreateLspAdvanced
Internal command for creating a bidirectional LSP entry.
Identifier - Unique LSP ID used when referencing the LSP within the node. Role - Defines whether the LSP is terminated/… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.20 |
||||
|
mplsNodeCreatePwGeneric
Internal command for creating a bidirectional LSP entry.
Identifier - Unique LSP ID used when referencing the LSP within the node. |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.21 |
||||
|
mplsNodeCreatePwMpls
Internal command for creating a bidirectional LSP entry.
Identifier - Unique LSP ID used when referencing the LSP within the node. |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.22 |
||||
|
mplsNodeCreatePwEnet
Internal command for creating a bidirectional LSP entry.
Identifier - Unique LSP ID used when referencing the LSP within the node. |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.23 |
||||
|
mplsNodeCreateBfdTemplate
Internal command for creating a new BFD template.
Identifier - The unique identifier for the template. Tx Interval - Minimum interval for sending BFD control packets. Configur… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.24 |
||||
|
mplsNodeCreateXCAdvanced
Internal command for creating a XC entry.
In-segment name - Name of the incoming segment. In-segment label - The MPLS label for the incoming traffic. Out-segment name - Name of the outgoing segme… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.5.1.1.25 |
mplsLspTable
table.1.3.6.1.4.1.8708.2.40.2.6.1
·
1 row entry
·
25 columns
The MPLS Label Switched Path group list. Each entry in the table represent a bidirectional LSP.
An entry in the MPLS LSP list.
Indexes
mplsLspIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsLspIndex
An arbitrary index assigned to each entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.1 |
||||||||||||
|
mplsLspName
The management name of the entry, for example
'lsp:1:2:identifier', where the first number indicates subrack, the second slot number and the third is the unique identifier. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.2 |
||||||||||||
|
mplsLspInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.3 |
||||||||||||
|
mplsLspIdentifier
A unique identifier for the LSP object.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.4 |
||||||||||||
|
mplsLspState
The indicated state of the LSP.
up - The LSP is active and the connection has been verified. down - The LSP is not active, or the connection has not been verified. unknown - The LSP connectivity… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.8708.2.40.2.6.1.1.5 |
||||||||||||
|
mplsLspRole
The entry signifies the role the LSP entry represents.
edge - The LSP is originated and terminated in the node, which is considered a Label edge router, LER. transit - The LSP is not originated in … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.40.2.6.1.1.6 |
||||||||||||
|
mplsLspForwardXCId
The identifier for the outgoing XC entry in a LER.
For a LSR transit LSP, the terms forward and reverse have no significance, and the forward XC indicates one direction of the bidirectional LSP. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.7 |
||||||||||||
|
mplsLspReverseXCId
The identifier for the incoming XC entry in a LER.
For a LSR transit LSP, the terms forward and reverse have no significance, and the reverse XC indicates one direction of the bidirectional LSP. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.8 |
||||||||||||
|
mplsLspPriority
The entry signifies the priority of the LSP within the tunnel.
1 - Highest priority, working LSP in a revertive protected tunnel with multiple LSPs. 2 - Second highest priority, protect… |
Integer32r/w Constraints: range: 1-2 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.9 |
||||||||||||
|
mplsLspSrcNodeId
The ID of the source node of the LSP, i.e. the node
where this LSP originates. Used for externally uniquely identifying the LSP in the standardized format, '[Src node ID]:[SrcTunnelId]-[Dest. Node ID]:[De… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.10 |
||||||||||||
|
mplsLspDestNodeId
The ID of the destination node of the LSP, i.e. the node
where this LSP terminates. Used for externally uniquely identifying the LSP in the standardized format. '[Src global ID]:[Src node ID]:[Src Tunnel … |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.11 |
||||||||||||
|
mplsLspSrcTunnelId
The source node MPLS-TP tunnel ID of the tunnel
that this LSP is a part of. Used for externally uniquely identifying the LSP in the standardized format. '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]:[Src… |
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.12 |
||||||||||||
|
mplsLspDestTunnelId
The destination node MPLS-TP tunnel ID of the tunnel
that this LSP is a part of. Used for externally uniquely identifying the LSP in the standardized format, '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]… |
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.13 |
||||||||||||
|
mplsLspLspId
The ID of the LSP, used for externally uniquely
identifying the LSP in the standardized format, '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]:[Src LSP ID]- [Dest Global ID]:[Dest. Node ID]:[Dest Tunnel … |
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.14 |
||||||||||||
|
mplsLspExtId
The ID string of the LSP, used for externally uniquely
identifying the LSP in the standardized format, '[Src Global ID]:[Src Node ID]:[Src Tunnel ID]:[Src LSP ID]- [Dest Global ID]:[Dest. Node ID]:[Dest … |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.15 |
||||||||||||
|
mplsLspIntTunnelId
The Internal ID of the MPLS-TP tunnel that the LSP is a
part of. This entry is used for internal cross-reference between tunnels and LSPs. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.16 |
||||||||||||
|
mplsLspRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.40.2.6.1.1.17 |
||||||||||||
|
mplsLspBFDSession
The Internal ID of the BFD session the LSP that is monitoring
the LSP data connections. This entry is used for internal cross-reference between BFD sessions and LSPs. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.18 |
||||||||||||
|
mplsLspCreateBFD
Internal command to create a BFD session object and
connect it to an LSP. BFD Template - Select preferred BFD template to setup timing of BFD session. Admin status - Set the initial state o… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.19 |
||||||||||||
|
mplsLspTrafficClass
deprecated
The entry signifies the Traffic Class.
|
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.20 |
||||||||||||
|
mplsLspGlobalId
This object allows the administrator to assign a unique
operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octet or 4-octet value of the operators Autonomous System Number… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.21 |
||||||||||||
|
mplsLspDestGlobalId
This object allows the administrator to assign a unique
operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octet or 4-octet value of the operators Autonomous System Number… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.22 |
||||||||||||
|
mplsLspReservedBW
Bandwidth reserved by the LSP.
Default value is 0 and inidcates that no bandwidth has been allocated by the LSP. |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.23 |
||||||||||||
|
mplsLspDescr
User configurable label.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.24 |
||||||||||||
|
mplsLspCreateBFDAdvanced
Internal command to create a BFD session object and
connect it to an LSP. BFD Template - Select preferred BFD template to setup timing of BFD session. Admin status - Set the initial state o… |
LUM-TCCommandString Textual Convention: LUM-TCCommandString OctetString |
.1.3.6.1.4.1.8708.2.40.2.6.1.1.25 |
mplsTnlXLspTable
table.1.3.6.1.4.1.8708.2.40.2.7.1
·
1 row entry
·
6 columns
The MPLS tunnel to LSP cross reference group list.
An entry in the MPLS tunnel LSP cross reference list.
Indexes
mplsTnlXLspIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mplsTnlXLspIndex
An arbitrary index assigned to each entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.7.1.1.1 |
||||||||||||
|
mplsTnlXLspName
The management name of the interface, for example
'tnlXLsp:1:2', where the first number indicates subrack, the second slot number. |
LUM-TCMgmtNameString Textual Convention: LUM-TCMgmtNameString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.7.1.1.2 |
||||||||||||
|
mplsTnlXLspInternalReference
For internal use only.
|
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.8708.2.40.2.7.1.1.3 |
||||||||||||
|
mplsTnlXLspTunnelId
Tunnel ID of this cross reference entry.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.7.1.1.4 |
||||||||||||
|
mplsTnlXLspLspId
LSP ID of this cross reference entry.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.8708.2.40.2.7.1.1.5 |
||||||||||||
|
mplsTnlXLspRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC. Note: The newly created object will not necessarily receive the same index as used in the create procedure. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.8708.2.40.2.7.1.1.6 |