mplsNodeCreateLspAdvanced

LUM-MPLS-MIB · .1.3.6.1.4.1.8708.2.40.2.5.1.1.20

Object

column LUM-TCCommandString

Internal command for creating a bidirectional LSP entry.
              
Identifier    - Unique LSP ID used when referencing
                the LSP within the node.
Role          - Defines whether the LSP is terminated/initiated
                in the node (edge) or not (transit).
Interface     - ID of the MPLS interface the LSP is bound to.
Outlabel      - MPLS label appended to outgoing MPLS packets
                for this LSP.
Inlabel       - MPLS label used to identify incoming MPLS
                packets on the interface above as part of
                this LSP.
Interface 2   - Id of the MPLS interface the LSP bound to in
                the reverse direction. Only valid for transit
                LSPs.
Outlabel 2    - MPLS label appended to outgoing MPLS packets
                on Interface 2. Only valid for transit LSPs.
Inlabel 2     - MPLS label used identify incoming MPLS packets
                on Interface 2 as part of this LSP. Only valid
                for transit LSPs.
Tunnel        - The internal ID of the tunnel an edge LSP
                shall be part of. Only valid for edge LSP
                objects.
MPLS-TP ID    - For transit LSPs, it is possible to set the
                standard MPLS-TP ID on the format:
                '<Source Global ID>::<Source Node ID>::<Source Tunnel ID>::<LSP ID>
                ::<Destination Global ID>
                ::<Destination Node ID>
                ::<Destination Tunnel ID>::<LSP ID>'.
                This is to simplify identification of the LSP
                on all nodes in the network. LSPs
                initiated/terminated on this node (edge) will
                inherit MPLS-TP ID data from its associated
                tunnel.

Context

MIB: LUM-MPLS-MIB
OID: .1.3.6.1.4.1.8708.2.40.2.5.1.1.20
Type: column
Access: readonly
Status: current
Parent: mplsNodeEntry
Table: mplsNodeTable
Siblings: 24

Syntax

LUM-TCCommandString

Source: LUM-TCCommandString
Base type: OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mplsNodeIndex An arbitrary index assigned to each entry.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.1`
mplsNodeCreatePw Pseudowire ID - Unique pseudowire ID used when referencing the pseudowire within the node. Pseudowire type - Edge pseudowire connects to a singel tunnel …	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.10`
mplsNodeCreateIf Internal command for creating an interface. Identifier - Unique MPLS interface ID used when referencing the interface within the node. Admin Status - Defines whet…	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.11`
mplsNodeLinearProtMode The mode of the protection domain, configured for all MPLS linear protection service on the board. nonRevertive (1) -- non-revertive mode revertive (2) -- revertive mode	column	Enumeration	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.12`
mplsNodeLinearProtWtrTimer The wait-to-restore (WTR) timer configured for all MPLS linear protection service on the board. A WTR timer is used to delay reversion to Normal state when recovering from a failu…	column	Unsigned32	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.13`
mplsNodeLPContMsgInterval In linear protection domain, the control message is transmitted over the protection path only. Subsequent messages are continuously transmitted to verify that the session is alive…	column	Unsigned32	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.14`
mplsNodeLPRapidMsgInterval In linear protection domain, when the state of the protection domain is changed, three control messages shall be transmitted as quickly as possible to allow for rapid protection s…	column	Unsigned32	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.15`
mplsNodeGlobalId This object allows the administrator to assign a unique operator identifier also called MPLS-TP Global Identifier. The Global Identifier can contain the 2-octet or 4-octet value o…	column	Unsigned32	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.16`
mplsNodeCreateMsPw Internal command for creating a multi-segment pseudowire. Identifier - Unique pseudowire ID used when referencing the pseudowire within the node. East outlabe…	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.17`
mplsNodeCreateLsp2 Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node. Role …	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.18`
mplsNodeCreateTunnelAdvanced Identifier - Unique tunnel ID used when referencing the tunnel within the node. MPLS-TP ID - Set the standard MPLS-TP ID for the tunnel o…	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.19`
mplsNodeName The management name of the interface, for example 'node:1:2', where the first number indicates subrack, the second slot number.	column	LUM-TCMgmtNameString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.2`
mplsNodeCreatePwGeneric Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node.	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.21`
mplsNodeCreatePwMpls Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node.	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.22`
mplsNodeCreatePwEnet Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node.	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.23`
mplsNodeCreateBfdTemplate Internal command for creating a new BFD template. Identifier - The unique identifier for the template. Tx Interval - Minimum interval for sending BFD…	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.24`
mplsNodeCreateXCAdvanced Internal command for creating a XC entry. In-segment name - Name of the incoming segment. In-segment label - The MPLS label for the incoming traffic. Out-se…	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.25`
mplsNodeSubrack The subrack that this MPLS node belongs to.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.3`
mplsNodeSlot The slot that this MPLS node belongs to.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.4`
mplsNodeIccIdStr Unique code assigned to the network operator or service provider maintained by ITU-T. The ITU carrier code used to form a globally unique node ID for non IP environments.	column	OctetString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.5`
mplsNodeIdNum Unique node ID / router ID assigned with in the scope of the network of the operator / service provider, defined by the ICC ID. This value is unique and only valid for this board.…	column	Unsigned32	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.6`
mplsNodeCreateXC Internal command for creating a XC entry. In-segment name - Name of the incoming segment. In-segment label - The MPLS label for the incoming traffic. Out-se…	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.7`
mplsNodeCreateTunnel Identifier - Unique tunnel ID used when referencing the tunnel within the node. MPLS-TP ID - Set the standard MPLS-TP ID for the tunnel o…	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.8`
mplsNodeCreateLsp Internal command for creating a bidirectional LSP entry. Identifier - Unique LSP ID used when referencing the LSP within the node. Role …	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.40.2.5.1.1.9`