DOCS-IF-MIB Table View

This table describes the attributes of downstream
channels (frequency bands).

docsIfDownstreamChannelEntry row .1.3.6.1.2.1.10.127.1.1.1.1

An entry provides a list of attributes for a single
downstream channel.
An entry in this table exists for each ifEntry with an
ifType of docsCableDownstream(128).

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfDownChannelId The Cable Modem Termination System identification of the downstream channel within this particular MAC interface. if the interface is down, the object returns the most current value. If the downstream channel ID is unk…	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.1.1.1.1
docsIfDownChannelFrequency The center of the downstream frequency associated with this channel. This object will return the current tuner frequency. If a CMTS provides IF output, this object will return 0, unless this CMTS is in …	hertzInteger32r/w Constraints: range: 0-1000000000	.1.3.6.1.2.1.10.127.1.1.1.1.2
docsIfDownChannelWidth The bandwidth of this downstream channel. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). See the associated compliance object for a description of the vali…	hertzInteger32r/w Constraints: range: 0-16000000	.1.3.6.1.2.1.10.127.1.1.1.1.3
docsIfDownChannelModulation The modulation type associated with this downstream channel. If the interface is down, this object either returns the configured value (CMTS), the most current value (CM), or the value of unknown(1). See the associate…	Enumerationr/w Enumerated Values: 1 unknown 2 other 3 qam64 4 qam256	.1.3.6.1.2.1.10.127.1.1.1.1.4
docsIfDownChannelInterleave The Forward Error Correction (FEC) interleaving used for this downstream channel. Values are defined as follows: taps8Increment16(3): protection 5.9/4.1 usec, latency .22/.15 msec taps16Incremen…	Enumerationr/w Enumerated Values: 1 unknown 2 other 3 taps8Increment16 4 taps16Increment8 5 taps32Increment4 6 taps64Increment2 7 taps128Increment1 8 taps12increment17	.1.3.6.1.2.1.10.127.1.1.1.1.5
docsIfDownChannelPower At the CMTS, the operational transmit power. At the CM, the received power level. If the interface is down, this object either returns the configured value (CMTS), the most current value (CM) or the value of 0. See th…	dBmVTenthdBmVr/w	.1.3.6.1.2.1.10.127.1.1.1.1.6
docsIfDownChannelAnnex The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-T J.83 is used. (equivalent to EN 300 429) annexB : Annex B from ITU-T J…	Enumeration Enumerated Values: 1 unknown 2 other 3 annexA 4 annexB 5 annexC	.1.3.6.1.2.1.10.127.1.1.1.1.7
docsIfDownChannelStorageType The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for read-write objects.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.127.1.1.1.1.8

This table describes the attributes of attached upstream
channels.

docsIfUpstreamChannelEntry row .1.3.6.1.2.1.10.127.1.1.2.1

List of attributes for a single upstream channel. For
DOCSIS 2.0 CMTSs, an entry in this table exists for
each ifEntry with an ifType of docsCableUpstreamChannel
(205).
For DOCSIS 1.x CM/CMTSs and DOCSIS 2.0 CMs, an en…

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfUpChannelId The CMTS identification of the upstream channel.	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.1.2.1.1
docsIfUpChannelFrequency The center of the frequency band associated with this upstream interface. This object returns 0 if the frequency is undefined or unknown. Minimum permitted upstream frequency is 5,000,000 Hz for current technology. S…	hertzInteger32r/w Constraints: range: 0-1000000000	.1.3.6.1.2.1.10.127.1.1.2.1.2
docsIfUpChannelWidth The bandwidth of this upstream interface. This object returns 0 if the interface width is undefined or unknown. Minimum permitted interface width is currently 200,000 Hz. See the associated conformance object for write…	hertzInteger32r/w Constraints: range: 0-64000000	.1.3.6.1.2.1.10.127.1.1.2.1.3
docsIfUpChannelModulationProfile An entry identical to the docsIfModIndex in the docsIfCmtsModulationTable that describes this channel. This channel is further instantiated there by a grouping of interval usage codes (IUCs) that, together, fully descri…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.1.2.1.4
docsIfUpChannelSlotSize Applicable to TDMA and ATDMA channel types only. The number of 6.25 microsecond ticks in each upstream mini-slot. Returns zero if the value is undefined or unknown or in case of an SCDMA channel. See the associated con…	ticksSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.1.2.1.5
docsIfUpChannelTxTimingOffset At the CM, a measure of the current round trip time obtained from the ranging offset (initial ranging offset + ranging offset adjustments). At the CMTS, the maximum of timing offset, among all the CMs that are/were pres…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.1.2.1.6
docsIfUpChannelRangingBackoffStart The initial random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive retry mechanism is to be used. See the associated co…	Integer32r/w Constraints: range: 0-16	.1.3.6.1.2.1.10.127.1.1.2.1.7
docsIfUpChannelRangingBackoffEnd The final random backoff window to use when retrying Ranging Requests. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive retry mechanism is to be used. See the associated conf…	Integer32r/w Constraints: range: 0-16	.1.3.6.1.2.1.10.127.1.1.2.1.8
docsIfUpChannelTxBackoffStart The initial random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive retry mechanism is to be used. See the associated confo…	Integer32r/w Constraints: range: 0-16	.1.3.6.1.2.1.10.127.1.1.2.1.9
docsIfUpChannelTxBackoffEnd The final random backoff window to use when retrying transmissions. Expressed as a power of 2. A value of 16 at the CMTS indicates that a proprietary adaptive retry mechanism is to be used. See the associated conform…	Integer32r/w Constraints: range: 0-16	.1.3.6.1.2.1.10.127.1.1.2.1.10
docsIfUpChannelScdmaActiveCodes Applicable for SCDMA channel types only. Number of active codes. Returns zero for Non-SCDMA channel types. Note that legal values from 64..128 MUST be non-prime.	Unsigned32r/w Constraints: range: 84-88 range: 80-82 range: 74-78 range: 72-72 range: 68-70 range: 64-66 range: 0-0 range: 90-96 range: 98-100 range: 102-102 range: 104-106 range: 108-108 range: 110-112 range: 114-126 range: 128-128	.1.3.6.1.2.1.10.127.1.1.2.1.11
docsIfUpChannelScdmaCodesPerSlot Applicable for SCDMA channel types only. The number of SCDMA codes per mini-slot. Returns zero if the value is undefined or unknown or in case of a TDMA or ATDMA channel.	codesperMinislotsInteger32r/w Constraints: range: 0-0 range: 2-32	.1.3.6.1.2.1.10.127.1.1.2.1.12
docsIfUpChannelScdmaFrameSize Applicable for SCDMA channel types only. SCDMA Frame size in units of spreading intervals. This value returns zero for non-SCDMA Profiles.	spreadIntervalsUnsigned32r/w Constraints: range: 0-32	.1.3.6.1.2.1.10.127.1.1.2.1.13
docsIfUpChannelScdmaHoppingSeed Applicable for SCDMA channel types only. 15-bit seed used for code hopping sequence initialization. Returns zero for non-SCDMA channel types. Setting this value to a value different than zero for non-SCDMA channel types…	Unsigned32r/w Constraints: range: 0-32767	.1.3.6.1.2.1.10.127.1.1.2.1.14
docsIfUpChannelType Reflects the Upstream channel type. This object returns the value of docsIfCmtsModChannelType for the modulation profile selected in docsIfUpChannelModulationProfile for this row.	DocsisUpstreamType Type Values: 0 unknown 1 tdma 2 atdma 3 scdma 4 tdmaAndAtdma	.1.3.6.1.2.1.10.127.1.1.2.1.15
docsIfUpChannelCloneFrom This object contains the ifIndex value of the physical interface row entry whose parameters are to be adjusted. Upon setting this object to the ifIndex value of a physical interface, the following interfa…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.127.1.1.2.1.16
docsIfUpChannelUpdate Used to perform the copy of adjusted parameters from the temporary interface entry to the physical interface indicated by the docsIfUpChannelCloneFrom object. The transfer is initiated through an SNMP SET to 'true' of …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.1.2.1.17
docsIfUpChannelStatus This object is only used for the creation of a temporary upstream row with the purpose of updating the parameters of a physical upstream channel entry. The following restrictions apply to this object: 1. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.127.1.1.2.1.18
docsIfUpChannelPreEqEnable At the CMTS, this object is used to enable or disable pre-equalization on the upstream channel represented by this table instance. At the CM, this object is read-only and reflects the status of pre-equalization as repr…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.1.2.1.19

Describes the attributes for each class of service.

docsIfQosProfileEntry row .1.3.6.1.2.1.10.127.1.1.3.1

Describes the attributes for a single class of service.
If implemented as read-create in the Cable Modem
Termination System, creation of entries in this table is
controlled by the value of
docsIfCmtsQosProfilePermission…

Indexes

docsIfQosProfIndex

Column	Syntax	OID
docsIfQosProfIndex The index value that uniquely identifies an entry in the docsIfQosProfileTable.	Integer32 Constraints: range: 1-16383	.1.3.6.1.2.1.10.127.1.1.3.1.1
docsIfQosProfPriority A relative priority assigned to this service when allocating bandwidth. Zero indicates lowest priority and seven indicates highest priority. Interpretation of priority is device-specific. MUST NOT be changed while this…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.2.1.10.127.1.1.3.1.2
docsIfQosProfMaxUpBandwidth The maximum upstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of upstream bandwidth. MUST NOT be changed while this row is active.	bits per secondInteger32r/w Constraints: range: 0-100000000	.1.3.6.1.2.1.10.127.1.1.3.1.3
docsIfQosProfGuarUpBandwidth Minimum guaranteed upstream bandwidth, in bits per second, allowed for a service with this service class. MUST NOT be changed while this row is active.	bits per secondInteger32r/w Constraints: range: 0-100000000	.1.3.6.1.2.1.10.127.1.1.3.1.4
docsIfQosProfMaxDownBandwidth The maximum downstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of downstream bandwidth. MUST NOT be changed while this row is active.	bits per secondInteger32r/w Constraints: range: 0-100000000	.1.3.6.1.2.1.10.127.1.1.3.1.5
docsIfQosProfMaxTxBurstdeprecated The maximum number of mini-slots that may be requested for a single upstream transmission. A value of zero means there is no limit. MUST NOT be changed while this row is active. This object has been deprecated and repla…	mini-slotsInteger32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.1.3.1.6
docsIfQosProfBaselinePrivacy Indicates whether Baseline Privacy is enabled for this service class. MUST NOT be changed while this row is active.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.1.3.1.7
docsIfQosProfStatus This is object is used to create or delete rows in this table. This object MUST NOT be changed from active while the row is referenced by any entry in either docsIfCmServiceTable (on the CM) or docsIfCmtsServiceTable (…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.127.1.1.3.1.8
docsIfQosProfMaxTransmitBurst The maximum number of bytes that may be requested for a single upstream transmission. A value of zero means there is no limit. Note: This value does not include any physical layer overhead. MUST NOT be changed while t…	bytesInteger32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.1.1.3.1.9
docsIfQosProfStorageType The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for writable objects.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.127.1.1.3.1.10

At the CM, describes the PHY signal quality of downstream
channels.  At the CMTS, this object describes the PHY
signal quality of upstream channels.  At the CMTS, this
table MAY exclude contention intervals.

docsIfSignalQualityEntry row .1.3.6.1.2.1.10.127.1.1.4.1

At the CM, this object describes the PHY characteristics of
a downstream channel. At the CMTS, it describes the PHY
signal quality of an upstream channel.
An entry in this table exists for each ifEntry with an
ifType o…

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfSigQIncludesContention true(1) if this CMTS includes contention intervals in the counters in this table. Always false(2) for CMs.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.1.4.1.1
docsIfSigQUnerroreds Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. Discontinuities in the value of this counter can occur at reinitialization…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.1.4.1.2
docsIfSigQCorrecteds Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. Discontinuities in the value of this counter can occur at reini…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.1.4.1.3
docsIfSigQUncorrectables Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. Discontinuities in the value of this counter can occur at rei…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.1.4.1.4
docsIfSigQSignalNoise Signal/Noise ratio as perceived for this channel. At the CM, this object describes the Signal/Noise of the downstream channel. At the CMTS, it describes the average Signal/Noise of the upstream channel.	TenthdBTenthdB	.1.3.6.1.2.1.10.127.1.1.4.1.5
docsIfSigQMicroreflections Microreflections, including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to return an absolutely accurate value, but it gives a rough indication …	-dBcInteger32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.1.4.1.6
docsIfSigQEqualizationData At the CM, this object returns the equalization data for the downstream channel. At the CMTS, this object is not applicable and is not instantiated. Note that previous CMTS implementations may instantiat…	DocsEqualizerData Type Constraints: range: 0 range: 36..260	.1.3.6.1.2.1.10.127.1.1.4.1.7
docsIfSigQExtUnerroreds Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. This is the 64-bit version of docsIfSigQUnerroreds. Discontinuities in the…	codewordsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.1.4.1.8
docsIfSigQExtCorrecteds Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. This is the 64-bit version of docsIfSigQCorrecteds. Discontinui…	codewordsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.1.4.1.9
docsIfSigQExtUncorrectables Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. This is the 64-bit version of docsIfSigQUncorrectables. Disco…	codewordsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.1.4.1.10

Describes the attributes of each CM MAC interface,
extending the information available from ifEntry.

docsIfCmMacEntry row .1.3.6.1.2.1.10.127.1.2.1.1

An entry containing objects describing attributes of
each MAC entry, extending the information in ifEntry.
An entry in this table exists for each ifEntry with an
ifType of docsCableMaclayer(127).

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfCmCmtsAddress Identifies the CMTS that is believed to control this MAC domain. At the CM, this will be the source address from SYNC, MAP, and other MAC-layer messages. If the CMTS is unknown, returns 00-00-00-00-00-00.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.10.127.1.2.1.1.1
docsIfCmCapabilities Identifies the capabilities of the MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specific bit required to explicitly indicate this capability. Note tha…	Bits Enumerated Values: 0 atmCells 1 concatenation	.1.3.6.1.2.1.10.127.1.2.1.1.2
docsIfCmRangingRespTimeoutobsolete Waiting time for a Ranging Response packet. This object has been obsoleted and replaced by docsIfCmRangingTimeout to correct the typing to TimeInterval.	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.1.1.3
docsIfCmRangingTimeout Waiting time for a Ranging Response packet. This object MUST NOT persist at reinitialization of the managed system.	HundredOfSecondsSNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.10.127.1.2.1.1.4

This table maintains a number of status objects
and counters for Cable Modems.

docsIfCmStatusEntry row .1.3.6.1.2.1.10.127.1.2.2.1

A set of status objects and counters for a single MAC
layer instance in Cable Modem.
An entry in this table exists for each ifEntry with an
ifType of docsCableMaclayer(127).

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfCmStatusValue Current Cable Modem connectivity state, as specified in the RF Interface Specification. Interpretations for state values 1-12 are clearly outlined in the SP-RFI reference given below. The state value accessDenied(13) i…	Enumeration Enumerated Values: 1 other 2 notReady 3 notSynchronized 4 phySynchronized 5 usParametersAcquired 6 rangingComplete 7 ipComplete 8 todEstablished 9 securityEstablished 10 paramTransferComplete 11 registrationComplete 12 operational 13 accessDenied	.1.3.6.1.2.1.10.127.1.2.2.1.1
docsIfCmStatusCode Status code for a Cable Modem as defined in the OSSI Specification. The status code consists of a single character indicating error groups, followed by a two- or three-digit number indicating the status condition, foll…	OctetString Constraints: range: 5-6 range: 0-0	.1.3.6.1.2.1.10.127.1.2.2.1.2
docsIfCmStatusTxPower The operational transmit power for the attached upstream channel.	TenthdBmVTenthdBmV	.1.3.6.1.2.1.10.127.1.2.2.1.3
docsIfCmStatusResets Number of times the CM reset or initialized this interface. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value o…	resetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.4
docsIfCmStatusLostSyncs Number of times the CM lost synchronization with the downstream channel. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.5
docsIfCmStatusInvalidMaps Number of times the CM received invalid MAP messages. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinu…	mapsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.6
docsIfCmStatusInvalidUcds Number of times the CM received invalid UCD messages. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCo…	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.7
docsIfCmStatusInvalidRangingResponses Number of times the CM received invalid ranging response messages. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCoun…	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.8
docsIfCmStatusInvalidRegistrationResponses Number of times the CM received invalid registration response messages. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of i…	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.9
docsIfCmStatusT1Timeouts Number of times counter T1 expired in the CM. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime …	timeoutsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.10
docsIfCmStatusT2Timeouts Number of times counter T2 expired in the CM. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime …	timeoutsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.11
docsIfCmStatusT3Timeouts Number of times counter T3 expired in the CM. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime …	timeoutsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.12
docsIfCmStatusT4Timeouts Number of times counter T4 expired in the CM. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime …	timeoutsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.13
docsIfCmStatusRangingAborteds Number of times the ranging process was aborted by the CMTS. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDis…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.14
docsIfCmStatusDocsisOperMode Indication of whether the device has registered using 1.0 Class of Service or 1.1 Quality of Service. An unregistered CM SHOULD indicate 'docsis11' for a docsIfDocsisBaseCapability value of DOCSIS 1.1/2.0. An unregiste…	DocsisQosVersion Type Values: 1 docsis10 2 docsis11	.1.3.6.1.2.1.10.127.1.2.2.1.15
docsIfCmStatusModulationType Indicates modulation type status currently used by the CM. Since this object specifically identifies PHY mode, the shared upstream channel type is not permitted.	DocsisUpstreamType Type Values: 0 unknown 1 tdma 2 atdma 3 scdma 4 tdmaAndAtdma	.1.3.6.1.2.1.10.127.1.2.2.1.16
docsIfCmStatusEqualizationData Pre-equalization data for this CM after convolution with data indicated in the RNG-RSP. This data is valid when docsIfUpChannelPreEqEnable is set to true.	DocsEqualizerData Type Constraints: range: 0 range: 36..260	.1.3.6.1.2.1.10.127.1.2.2.1.17
docsIfCmStatusUCCs The number of successful Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterD…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.18
docsIfCmStatusUCCFails The number of failed Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDisco…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.2.1.19

Describes the attributes of each upstream service queue
on a CM.

docsIfCmServiceEntry row .1.3.6.1.2.1.10.127.1.2.3.1

Describes the attributes of an upstream bandwidth service
queue.
An entry in this table exists for each Service ID.
The primary index is an ifIndex with an ifType of
docsCableMaclayer(127).

Indexes

IF-MIBifIndex docsIfCmServiceId

Column	Syntax	OID
docsIfCmServiceId Identifies a service queue for upstream bandwidth. The attributes of this service queue are shared between the CM and the CMTS. The CMTS allocates upstream bandwidth to this service queue based on requests from the CM…	Integer32 Constraints: range: 1-16383	.1.3.6.1.2.1.10.127.1.2.3.1.1
docsIfCmServiceQosProfile The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular service. If no associated entry in docsIfQosProfileTable exists, this object returns a value of zero.	Integer32 Constraints: range: 0-16383	.1.3.6.1.2.1.10.127.1.2.3.1.2
docsIfCmServiceTxSlotsImmed The number of upstream mini-slots that have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to have arrived at the head-end (i.e., those that were explici…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.3.1.3
docsIfCmServiceTxSlotsDed The number of upstream mini-slots that have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). Discontinuities in the value of this counter can occur at reinitialization of th…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.3.1.4
docsIfCmServiceTxRetries The number of attempts to transmit data PDUs containing requests for acknowledgment that did not result in acknowledgment. Discontinuities in the value of this counter can occur at reinitialization of the managed system…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.3.1.5
docsIfCmServiceTxExceededs The number of data PDU transmission failures due to excessive retries without acknowledgment. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indic…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.3.1.6
docsIfCmServiceRqRetries The number of attempts to transmit bandwidth requests that did not result in acknowledgment. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indica…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.3.1.7
docsIfCmServiceRqExceededs The number of requests for bandwidth that failed due to excessive retries without acknowledgment. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as i…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.2.3.1.8
docsIfCmServiceExtTxSlotsImmed The number of upstream mini-slots that have been used to transmit data PDUs in immediate (contention) mode. This includes only those PDUs that are presumed to have arrived at the head-end (i.e., those that were explici…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.2.3.1.9
docsIfCmServiceExtTxSlotsDed The number of upstream mini-slots that have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Grant). Discontinuities in the value of this counter can occur at reinitialization of th…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.2.3.1.10

Describes the attributes of each CMTS MAC interface,
extending the information available from ifEntry.
Mandatory for all CMTS devices.

docsIfCmtsMacEntry row .1.3.6.1.2.1.10.127.1.3.1.1

An entry containing objects describing attributes of each
MAC entry, extending the information in ifEntry.
An entry in this table exists for each ifEntry with an
ifType of docsCableMaclayer(127).

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfCmtsCapabilities Identifies the capabilities of the CMTS MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specific bit required to explicitly indicate this capability. Not…	Bits Enumerated Values: 0 atmCells 1 concatenation	.1.3.6.1.2.1.10.127.1.3.1.1.1
docsIfCmtsSyncInterval The interval between CMTS transmission of successive SYNC messages at this interface.	MillisecondsInteger32r/w Constraints: range: 1-200	.1.3.6.1.2.1.10.127.1.3.1.1.2
docsIfCmtsUcdInterval The interval between CMTS transmission of successive Upstream Channel Descriptor messages for each upstream channel at this interface.	MillisecondsInteger32r/w Constraints: range: 1-2000	.1.3.6.1.2.1.10.127.1.3.1.1.3
docsIfCmtsMaxServiceIds The maximum number of service IDs that may be simultaneously active.	SIDsInteger32 Constraints: range: 1-16383	.1.3.6.1.2.1.10.127.1.3.1.1.4
docsIfCmtsInsertionIntervalobsolete The amount of time to elapse between each broadcast initial maintenance grant. Broadcast initial maintenance grants are used to allow new cable modems to join the network. Zero indicates that a vendor-specific algorit…	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.1.1.5
docsIfCmtsInvitedRangingAttempts The maximum number of attempts to make on invitations for ranging requests. A value of zero means the system SHOULD attempt to range forever.	attemptsInteger32r/w Constraints: range: 0-1024	.1.3.6.1.2.1.10.127.1.3.1.1.6
docsIfCmtsInsertInterval The amount of time to elapse between each broadcast initial maintenance grant. Broadcast initial maintenance grants are used to allow new cable modems to join the network. Zero indicates that a vendor-specific algorit…	HundredOfSecondsSNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.2.1.10.127.1.3.1.1.7
docsIfCmtsMacStorageType The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for read-write objects.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.127.1.3.1.1.8

For the MAC layer, this group maintains a number of
status objects and counters.

docsIfCmtsStatusEntry row .1.3.6.1.2.1.10.127.1.3.2.1

Status entry for a single MAC layer.
An entry in this table exists for each ifEntry with an
ifType of docsCableMaclayer(127).

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfCmtsStatusInvalidRangeReqs This object counts invalid RNG-REQ messages received on this interface. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by…	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.2.1.1
docsIfCmtsStatusRangingAborteds This object counts ranging attempts that were explicitly aborted by the CMTS. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the valu…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.2.1.2
docsIfCmtsStatusInvalidRegReqs This object counts invalid REG-REQ messages received on this interface; that is, syntax, out of range parameters, or erroneous requests. Discontinuities in the value of this counter can occur at reinitialization of the …	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.2.1.3
docsIfCmtsStatusFailedRegReqs This object counts failed registration attempts. Included are docsIfCmtsStatusInvalidRegReqs, authentication, and class of service failures. Discontinuities in the value of this counter can occur at reinitialization of…	attemptsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.2.1.4
docsIfCmtsStatusInvalidDataReqs This object counts invalid data request messages received on this interface. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value…	messagesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.2.1.5
docsIfCmtsStatusT5Timeouts This object counts the number of times counter T5 expired on this interface. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value…	timeoutsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.2.1.6

A set of objects in the CMTS, maintained for each
cable modem connected to this CMTS.

docsIfCmtsCmStatusEntry row .1.3.6.1.2.1.10.127.1.3.3.1

Status information for a single cable modem.
An entry in this table exists for each cable modem
that is connected to the CMTS implementing this table.

Indexes

docsIfCmtsCmStatusIndex

Column	Syntax	OID
docsIfCmtsCmStatusIndex Index value to uniquely identify an entry in this table. For an individual cable modem, this index value SHOULD NOT change during CMTS uptime.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.127.1.3.3.1.1
docsIfCmtsCmStatusMacAddress MAC address of the cable modem. If the cable modem has multiple MAC addresses, this is the MAC address associated with the Cable interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.10.127.1.3.3.1.2
docsIfCmtsCmStatusIpAddressdeprecated IP address of this cable modem. If the cable modem has no IP address assigned, or the IP address is unknown, this object returns a value of 0.0.0.0. If the cable modem has multiple IP addresses, this object returns th…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.10.127.1.3.3.1.3
docsIfCmtsCmStatusDownChannelIfIndex IfIndex of the downstream channel that this CM is connected to. If the downstream channel is unknown, this object returns a value of zero.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.127.1.3.3.1.4
docsIfCmtsCmStatusUpChannelIfIndex For DOCSIS 2.0, indicates the ifIndex of the logical upstream channel (ifType 205) this CM is connected to. For DOCSIS 1.x, indicates the ifIndex of the upstream channel (ifType 129) this CM is connected to. If the up…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.127.1.3.3.1.5
docsIfCmtsCmStatusRxPower The receive power as perceived for upstream data from this cable modem. If the receive power is unknown, this object returns a value of zero.	ThenthdBmVTenthdBmV	.1.3.6.1.2.1.10.127.1.3.3.1.6
docsIfCmtsCmStatusTimingOffset A measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in terms of (6.25 microseconds/64). Returns zero if the value i…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.127.1.3.3.1.7
docsIfCmtsCmStatusEqualizationData Equalization data for this CM, as measured by the CMTS. Returns the zero-length OCTET STRING if the value is unknown or if there is no equalization data available or defined.	DocsEqualizerData Type Constraints: range: 0 range: 36..260	.1.3.6.1.2.1.10.127.1.3.3.1.8
docsIfCmtsCmStatusValue Current cable modem connectivity state, as specified in the RF Interface Specification. Returned status information is the CM status, as assumed by the CMTS, and indicates the following events: other(1) Any state ot…	Enumeration Enumerated Values: 1 other 2 ranging 3 rangingAborted 4 rangingComplete 5 ipComplete 6 registrationComplete 7 accessDenied 8 operational 9 registeredBPIInitializing	.1.3.6.1.2.1.10.127.1.3.3.1.9
docsIfCmtsCmStatusUnerroreds Codewords received without error from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDisconti…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.3.1.10
docsIfCmtsCmStatusCorrecteds Codewords received with correctable errors from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCount…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.3.1.11
docsIfCmtsCmStatusUncorrectables Codewords received with uncorrectable errors from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCou…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.3.1.12
docsIfCmtsCmStatusSignalNoise Signal/Noise ratio as perceived for upstream data from this cable modem. If the Signal/Noise is unknown, this object returns a value of zero.	TenthdBTenthdB	.1.3.6.1.2.1.10.127.1.3.3.1.13
docsIfCmtsCmStatusMicroreflections Total microreflections, including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to return an absolutely accurate value, but it gives a rough indic…	-dBcInteger32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.3.3.1.14
docsIfCmtsCmStatusExtUnerroreds Codewords received without error from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDisconti…	codewordsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.3.1.15
docsIfCmtsCmStatusExtCorrecteds Codewords received with correctable errors from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCount…	codewordsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.3.1.16
docsIfCmtsCmStatusExtUncorrectables Codewords received with uncorrectable errors from this cable modem. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCou…	codewordsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.3.1.17
docsIfCmtsCmStatusDocsisRegMode Indication of whether the CM has registered using 1.0 Class of Service or 1.1 Quality of Service.	DocsisQosVersion Type Values: 1 docsis10 2 docsis11	.1.3.6.1.2.1.10.127.1.3.3.1.18
docsIfCmtsCmStatusModulationType Indicates modulation type currently used by the CM. Since this object specifically identifies PHY mode, the shared type is not permitted. If the upstream channel is unknown, this object returns a value of zero.	DocsisUpstreamType Type Values: 0 unknown 1 tdma 2 atdma 3 scdma 4 tdmaAndAtdma	.1.3.6.1.2.1.10.127.1.3.3.1.19
docsIfCmtsCmStatusInetAddressType The type of internet address of docsIfCmtsCmStatusInetAddress. If the cable modem internet address is unassigned or unknown, then the value of this object is unknown(0).	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.127.1.3.3.1.20
docsIfCmtsCmStatusInetAddress Internet address of this cable modem. If the Cable Modem has no Internet address assigned, or the Internet address is unknown, the value of this object is the zero-length OCTET STRING. If the cable modem has multiple …	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.10.127.1.3.3.1.21
docsIfCmtsCmStatusValueLastUpdate The value of sysUpTime when docsIfCmtsCmStatusValue was last updated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.127.1.3.3.1.22
docsIfCmtsCmStatusHighResolutionTimingOffset A measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in terms of (6.25 microseconds/(64*256)). Returns zero if the v…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.2.1.10.127.1.3.3.1.23

Describes the attributes of upstream service queues
in a Cable Modem Termination System.

docsIfCmtsServiceEntry row .1.3.6.1.2.1.10.127.1.3.4.1

Describes the attributes of a single upstream bandwidth
service queue.
Entries in this table exist for each ifEntry with an
ifType of docsCableMaclayer(127), and for each service
queue (Service ID) within this MAC layer…

Indexes

IF-MIBifIndex docsIfCmtsServiceId

Column	Syntax	OID
docsIfCmtsServiceId Identifies a service queue for upstream bandwidth. The attributes of this service queue are shared between the Cable Modem and the Cable Modem Termination System. The CMTS allocates upstream bandwidth to this service q…	Integer32 Constraints: range: 1-16383	.1.3.6.1.2.1.10.127.1.3.4.1.1
docsIfCmtsServiceCmStatusIndexdeprecated Pointer to an entry in docsIfCmtsCmStatusTable identifying the cable modem using this Service Queue. If multiple cable modems are using this Service Queue, the value of this object is zero. This object has been depreca…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.127.1.3.4.1.2
docsIfCmtsServiceAdminStatus Allows a service class for a particular modem to be suppressed, (re-)enabled, or deleted altogether.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 destroyed	.1.3.6.1.2.1.10.127.1.3.4.1.3
docsIfCmtsServiceQosProfile The index in docsIfQosProfileTable describing the quality of service attributes associated with this particular service. If no associated docsIfQosProfileTable entry exists, this object returns a value of zero.	Integer32 Constraints: range: 0-16383	.1.3.6.1.2.1.10.127.1.3.4.1.4
docsIfCmtsServiceCreateTime The value of sysUpTime when this entry was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.127.1.3.4.1.5
docsIfCmtsServiceInOctets The cumulative number of Packet Data octets received on this Service ID. The count does not include the size of the Cable MAC header. Discontinuities in the value of this counter can occur at reinitialization of the ma…	BytesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.4.1.6
docsIfCmtsServiceInPackets The cumulative number of Packet Data packets received on this Service ID. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of…	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.4.1.7
docsIfCmtsServiceNewCmStatusIndex Pointer (via docsIfCmtsCmStatusIndex) to an entry in docsIfCmtsCmStatusTable identifying the cable modem using this Service Queue. If multiple cable modems are using this Service Queue, the value of this object is zero.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.127.1.3.4.1.8

Describes a modulation profile associated with one or more
upstream channels.

docsIfCmtsModulationEntry row .1.3.6.1.2.1.10.127.1.3.5.1

Describes a modulation profile for an Interval Usage Code
for one or more upstream channels.
Entries in this table are created by the operator.

Initial default entries MAY be created at system
initializatio…

Indexes

docsIfCmtsModIndex docsIfCmtsModIntervalUsageCode

Column	Syntax	OID
docsIfCmtsModIndex An index into the Channel Modulation table representing a group of Interval Usage Codes, all associated with the same channel.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.127.1.3.5.1.1
docsIfCmtsModIntervalUsageCode An index into the Channel Modulation table that, when grouped with other Interval Usage Codes, fully instantiates all modulation sets for a given upstream channel.	Enumeration Enumerated Values: 1 request 2 requestData 3 initialRanging 4 periodicRanging 5 shortData 6 longData 9 advPhyShortData 10 advPhyLongData 11 ugs	.1.3.6.1.2.1.10.127.1.3.5.1.2
docsIfCmtsModControl Controls and reflects the status of rows in this table. There is no restriction on the changing of values in this table while their associated rows are active, with the exception of: 1. If a modulation pr…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.127.1.3.5.1.3
docsIfCmtsModType The modulation type used on this channel. Returns other(1) if the modulation type is not qpsk, qam16, qam8, qam32, qam64, or qam128. Type qam128 is used for SCDMA channels only. See the reference for the modulation pro…	Enumerationr/w Enumerated Values: 1 other 2 qpsk 3 qam16 4 qam8 5 qam32 6 qam64 7 qam128	.1.3.6.1.2.1.10.127.1.3.5.1.4
docsIfCmtsModPreambleLen The preamble length for this modulation profile in bits. Default value is the minimum needed by the implementation at the CMTS for the given modulation profile.	bitsInteger32r/w Constraints: range: 0-1536	.1.3.6.1.2.1.10.127.1.3.5.1.5
docsIfCmtsModDifferentialEncoding Specifies whether or not differential encoding is used on this channel.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.3.5.1.6
docsIfCmtsModFECErrorCorrection The number of correctable errored bytes (t) used in forward error correction code. The value of 0 indicates that no correction is employed. The number of check bytes appended will be twice this value.	BytesInteger32r/w Constraints: range: 0-16	.1.3.6.1.2.1.10.127.1.3.5.1.7
docsIfCmtsModFECCodewordLength The number of data bytes (k) in the forward error correction codeword. This object is not used if docsIfCmtsModFECErrorCorrection is zero.	BytesInteger32r/w Constraints: range: 1-255	.1.3.6.1.2.1.10.127.1.3.5.1.8
docsIfCmtsModScramblerSeed The 15-bit seed value for the scrambler polynomial.	Integer32r/w Constraints: range: 0-32767	.1.3.6.1.2.1.10.127.1.3.5.1.9
docsIfCmtsModMaxBurstSize The maximum number of mini-slots that can be transmitted during this channel's burst time. Returns zero if the burst length is bounded by the allocation MAP rather than by this profile. Default value is 0, except for s…	mini-slotsInteger32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.3.5.1.10
docsIfCmtsModGuardTimeSize The number of symbol-times that MUST follow the end of this channel's burst. Default value is the minimum time needed by the implementation for this modulation profile.	Symbol-timesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.5.1.11
docsIfCmtsModLastCodewordShortened Indicates whether the last FEC codeword is truncated.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.3.5.1.12
docsIfCmtsModScrambler Indicates whether the scrambler is employed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.3.5.1.13
docsIfCmtsModByteInterleaverDepth ATDMA Byte Interleaver Depth (Ir). This object returns 1 for non-ATDMA profiles.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.5.1.14
docsIfCmtsModByteInterleaverBlockSize ATDMA Byte Interleaver Block size (Br). This object returns zero for non-ATDMA profiles	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.5.1.15
docsIfCmtsModPreambleType Preamble type for DOCSIS 2.0 bursts. The value 'unknown(0)' represents a row entry consisting only of DOCSIS 1.x bursts	Enumerationr/w Enumerated Values: 0 unknown 1 qpsk0 2 qpsk1	.1.3.6.1.2.1.10.127.1.3.5.1.16
docsIfCmtsModTcmErrorCorrectionOn Trellis Code Modulation (TCM) On/Off. This value returns false for non-S-CDMA profiles.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.3.5.1.17
docsIfCmtsModScdmaInterleaverStepSize S-CDMA Interleaver step size. This value returns zero for non-S-CDMA profiles.	Unsigned32r/w Constraints: range: 0-32	.1.3.6.1.2.1.10.127.1.3.5.1.18
docsIfCmtsModScdmaSpreaderEnable S-CDMA spreader. This value returns false for non-S-CDMA profiles. Default value for IUC 3 and 4 is OFF; for all other IUCs it is ON.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.127.1.3.5.1.19
docsIfCmtsModScdmaSubframeCodes S-CDMA sub-frame size. This value returns zero for non-S-CDMA profiles.	Unsigned32r/w Constraints: range: 0-128	.1.3.6.1.2.1.10.127.1.3.5.1.20
docsIfCmtsModChannelType Describes the modulation channel type for this modulation entry. All the active entries in a modulation profile (that is all active entries that share a common docsIfCmtsModIndex) MUST have the same value of docsIfCmtsM…	DocsisUpstreamTyper/w Type Values: 0 unknown 1 tdma 2 atdma 3 scdma 4 tdmaAndAtdma	.1.3.6.1.2.1.10.127.1.3.5.1.21
docsIfCmtsModStorageType The storage type for this conceptual row. Entries with this object set to permanent(4) do not require write operations for read-write objects.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.127.1.3.5.1.22

This is a table to provide a quick access index into the
docsIfCmtsCmStatusTable.  There is exactly one row in this
table for each row in the docsIfCmtsCmStatusTable.  In
general, the management station SHOULD use this table only
to get a pointer into the docsIfCmtsCmStatusTable (which
corresponds to the CM's RF interface MAC address) and
SHOULD not iterate (e.g., GetNext through) this table.

docsIfCmtsMacToCmEntry row .1.3.6.1.2.1.10.127.1.3.7.1

A row in the docsIfCmtsMacToCmTable.
An entry in this table exists for each cable modem
that is connected to the CMTS implementing this table.

Indexes

docsIfCmtsCmMac

Column	Syntax	OID
docsIfCmtsCmMac The RF side MAC address for the referenced CM (e.g., the interface on the CM that has docsCableMacLayer(127) as its ifType).	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.10.127.1.3.7.1.1
docsIfCmtsCmPtr An row index into docsIfCmtsCmStatusTable. When queried with the correct instance value (e.g., a CM's MAC address), returns the index in docsIfCmtsCmStatusTable that represents that CM.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.127.1.3.7.1.2

Reports utilization statistics for attached upstream and
downstream physical channels.

docsIfCmtsChannelUtilizationEntry row .1.3.6.1.2.1.10.127.1.3.9.1

Utilization statistics for a single upstream or downstream
physical channel. An entry exists in this table for each
ifEntry with an ifType equal to
docsCableDownstream (128)
or docsCableUpstream (129).

Indexes

IF-MIBifIndex docsIfCmtsChannelUtIfType docsIfCmtsChannelUtId

Column	Syntax	OID
docsIfCmtsChannelUtIfType The secondary index into this table. Indicates the IANA interface type associated with this physical channel. Only docsCableDownstream (128) and docsCableUpstream (129) are valid.	IANAifType-MIBIANAifType Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.2.1.10.127.1.3.9.1.1
docsIfCmtsChannelUtId The tertiary index into this table. Indicates the CMTS identifier for this physical channel.	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.3.9.1.2
docsIfCmtsChannelUtUtilization The calculated and truncated utilization index for this physical upstream or downstream channel, accurate as of the most recent docsIfCmtsChannelUtilizationInterval. Upstream Channel Utilization Index: …	percentInteger32 Constraints: range: 0-100	.1.3.6.1.2.1.10.127.1.3.9.1.3

This table is implemented at the CMTS to collect
downstream channel statistics for utilization
          
calculations.

docsIfCmtsDownChannelCounterEntry row .1.3.6.1.2.1.10.127.1.3.10.1

An entry provides a list of traffic counters for a single
downstream channel.
An entry in this table exists for each ifEntry with an
ifType of docsCableDownstream(128).

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfCmtsDownChnlCtrId The Cable Modem Termination System identification of the downstream channel within this particular MAC interface. If the interface is down, the object returns the most current value. If the downstream channel ID is un…	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.3.10.1.1
docsIfCmtsDownChnlCtrTotalBytes At the CMTS, the total number of bytes in the Payload portion of MPEG Packets (i.e., not including MPEG header or pointer_field) transported by this downstream channel. This is the 32-bit version of docsIfCmtsDownChnlCt…	BytesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.10.1.2
docsIfCmtsDownChnlCtrUsedBytes At the CMTS, the total number of DOCSIS data bytes transported by this downstream channel. The number of data bytes is defined as the total number of bytes transported in DOCSIS payloads minus the number of stuff bytes …	BytesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.10.1.3
docsIfCmtsDownChnlCtrExtTotalBytes At the CMTS, the total number of bytes in the Payload portion of MPEG Packets (i.e., not including MPEG header or pointer_field) transported by this downstream channel. This is the 64-bit version of docsIfCmtsDownChnlCt…	BytesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.10.1.4
docsIfCmtsDownChnlCtrExtUsedBytes At the CMTS, the total number of DOCSIS data bytes transported by this downstream channel. The number of data bytes is defined as the total number of bytes transported in DOCSIS payloads minus the number of stuff bytes…	BytesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.10.1.5

This table is implemented at the CMTS to provide upstream
channel statistics appropriate for channel utilization
calculations.

docsIfCmtsUpChannelCounterEntry row .1.3.6.1.2.1.10.127.1.3.11.1

List of traffic statistics for a single upstream channel.
For DOCSIS 2.0 CMTSs, an entry in this table
exists for each ifEntry with an ifType of
docsCableUpstreamChannel (205).

For DOCSIS 1.x CMTSs, an entr…

Indexes

IF-MIBifIndex

Column	Syntax	OID
docsIfCmtsUpChnlCtrId The CMTS identification of the upstream channel.	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.127.1.3.11.1.1
docsIfCmtsUpChnlCtrTotalMslots Current count, from CMTS initialization, of all mini-slots defined for this upstream logical channel. This count includes all IUCs and SIDs, even those allocated to the NULL SID for a 2.0 logical channel that is inacti…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.2
docsIfCmtsUpChnlCtrUcastGrantedMslots Current count, from CMTS initialization, of unicast granted mini-slots on the upstream logical channel, regardless of burst type. Unicast granted mini-slots are those in which the CMTS assigned bandwidth to any unicast…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.3
docsIfCmtsUpChnlCtrTotalCntnMslots Current count, from CMTS initialization, of contention mini-slots defined for this upstream logical channel. This count includes all mini-slots assigned to a broadcast or multicast SID on the logical cha…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.4
docsIfCmtsUpChnlCtrUsedCntnMslots Current count, from CMTS initialization, of contention mini-slots utilized on the upstream logical channel. For contention regions, utilized mini-slots are those in which the CMTS correctly received an upstream burst f…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.5
docsIfCmtsUpChnlCtrExtTotalMslots Current count, from CMTS initialization, of all mini-slots defined for this upstream logical channel. This count includes all IUCs and SIDs, even those allocated to the NULL SID for a 2.0 logical channel that is inacti…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.6
docsIfCmtsUpChnlCtrExtUcastGrantedMslots Current count, from CMTS initialization, of unicast granted mini-slots on the upstream logical channel, regardless of burst type. Unicast granted mini-slots are those in which the CMTS assigned bandwidth to any unicast…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.7
docsIfCmtsUpChnlCtrExtTotalCntnMslots Current count, from CMTS initialization, of contention mini-slots defined for this upstream logical channel. This count includes all mini-slots assigned to a broadcast or multicast SID on the logical channel. This is …	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.8
docsIfCmtsUpChnlCtrExtUsedCntnMslots Current count, from CMTS initialization, of contention mini-slots utilized on the upstream logical channel. For contention regions, utilized mini-slots are those in which the CMTS correctly received an u…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.9
docsIfCmtsUpChnlCtrCollCntnMslots Current count, from CMTS initialization, of contention mini-slots subjected to collisions on the upstream logical channel. For contention regions, these are the mini-slots applicable to bursts that the CMTS detected bu…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.10
docsIfCmtsUpChnlCtrTotalCntnReqMslots Current count, from CMTS initialization, of contention request mini-slots defined for this upstream logical channel. This count includes all mini-slots for IUC1 assigned to a broadcast or multicast SID on the logical c…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.11
docsIfCmtsUpChnlCtrUsedCntnReqMslots Current count, from CMTS initialization, of contention request mini-slots utilized on this upstream logical channel. This count includes all contention mini-slots for IUC1 applicable to bursts that the CMTS correctly r…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.12
docsIfCmtsUpChnlCtrCollCntnReqMslots Current count, from CMTS initialization, of contention request mini-slots subjected to collisions on this upstream logical channel. This includes all contention mini-slots for IUC1 applicable to bursts that the CMTS de…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.13
docsIfCmtsUpChnlCtrTotalCntnReqDataMslots Current count, from CMTS initialization, of contention request data mini-slots defined for this upstream logical channel. This count includes all mini-slots for IUC2 assigned to a broadcast or multicast …	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.14
docsIfCmtsUpChnlCtrUsedCntnReqDataMslots Current count, from CMTS initialization, of contention request data mini-slots utilized on this upstream logical channel. This includes all contention mini-slots for IUC2 applicable to bursts that the CMTS correctly re…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.15
docsIfCmtsUpChnlCtrCollCntnReqDataMslots Current count, from CMTS initialization, of contention request data mini-slots subjected to collisions on this upstream logical channel. This includes all contention mini-slots for IUC2 applicable to bursts that the CM…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.16
docsIfCmtsUpChnlCtrTotalCntnInitMaintMslots Current count, from CMTS initialization, of contention initial maintenance mini-slots defined for this upstream logical channel. This includes all mini-slots for IUC3 assigned to a broadcast or multicast SID on the log…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.17
docsIfCmtsUpChnlCtrUsedCntnInitMaintMslots Current count, from CMTS initialization, of contention initial maintenance mini-slots utilized on this upstream logical channel. This includes all contention mini-slots for IUC3 applicable to bursts that the CMTS corre…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.18
docsIfCmtsUpChnlCtrCollCntnInitMaintMslots Current count, from CMTS initialization, of contention initial maintenance mini-slots subjected to collisions on this upstream logical channel. This includes all contention mini-slots for IUC3 applicable to bursts that…	mini-slotsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.127.1.3.11.1.19
docsIfCmtsUpChnlCtrExtCollCntnMslots Current count, from CMTS initialization, of collision contention mini-slots on the upstream logical channel. For contention regions, these are the mini-slots applicable to bursts that the CMTS detected, but could not co…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.20
docsIfCmtsUpChnlCtrExtTotalCntnReqMslots Current count, from CMTS initialization, of contention request mini-slots defined for this upstream logical channel. This count includes all mini-slots for IUC1 assigned to a broadcast or multicast SID on the logical c…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.21
docsIfCmtsUpChnlCtrExtUsedCntnReqMslots Current count, from CMTS initialization, of contention request mini-slots utilized on this upstream logical channel. This count includes all contention mini-slots for IUC1 applicable to bursts that the CMTS correctly r…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.22
docsIfCmtsUpChnlCtrExtCollCntnReqMslots Current count, from CMTS initialization, of contention request mini-slots subjected to collisions on this upstream logical channel. This includes all contention mini-slots for IUC1 applicable to bursts that the CMTS de…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.23
docsIfCmtsUpChnlCtrExtTotalCntnReqDataMslots Current count, from CMTS initialization, of contention request data mini-slots defined for this upstream logical channel. This count includes all mini-slots for IUC2 assigned to a broadcast or multicast SID on the logi…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.24
docsIfCmtsUpChnlCtrExtUsedCntnReqDataMslots Current count, from CMTS initialization, of contention request data mini-slots utilized on this upstream logical channel. This includes all contention mini-slots for IUC2 applicable to bursts that the CMTS correctly re…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.25
docsIfCmtsUpChnlCtrExtCollCntnReqDataMslots Current count, from CMTS initialization, of contention request data mini-slots subjected to collisions on this upstream logical channel. This includes all contention mini-slots for IUC2 applicable to bursts that the CM…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.26
docsIfCmtsUpChnlCtrExtTotalCntnInitMaintMslots Current count, from CMTS initialization, of initial maintenance mini-slots defined for this upstream logical channel. This count includes all mini-slots for IUC3 assigned to a broadcast or multicast SID on the logical …	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.27
docsIfCmtsUpChnlCtrExtUsedCntnInitMaintMslots Current count, from CMTS initialization, of initial maintenance mini-slots utilized on this upstream logical channel. This includes all contention mini-slots for IUC3 applicable to bursts that the CMTS correctly receiv…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.28
docsIfCmtsUpChnlCtrExtCollCntnInitMaintMslots Current count, from CMTS initialization, of contention initial maintenance mini-slots subjected to collisions on this upstream logical channel. This includes all contention mini-slots for IUC3 applicable to bursts that…	mini-slotsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.127.1.3.11.1.29