docsIfUpChannelModulationProfile
DOCS-IF-MIB ·
.1.3.6.1.2.1.10.127.1.1.2.1.4
Object
An entry identical to the docsIfModIndex in the
docsIfCmtsModulationTable that describes this channel.
This channel is further instantiated there by a grouping
of interval usage codes (IUCs) that, together, fully
describe the channel modulation. This object returns 0 if
the docsIfCmtsModulationTable entry does not exist or is
empty. See the associated conformance object for write
conditions and limitations.
Setting this object returns an 'inconsistentValue'
error if the following conditions are not satisfied:
1. All the IUC entries in the selected modulation profile
MUST have the same value of docsIfCmtsModChannelType.
2. All of the Modulation parameters in the selected
modulation profile MUST be consistent with the other
parameters in this docsIfUpstreamChannelEntry.
Context
- MIB
- DOCS-IF-MIB
- OID
.1.3.6.1.2.1.10.127.1.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- docsIfUpstreamChannelEntry
- Table
- docsIfUpstreamChannelTable
- Siblings
- 18
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfUpChannelId The CMTS identification of the upstream channel. | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.1 |
| docsIfUpChannelTxBackoffEnd The final random backoff window to use when retrying
transmissions. Expressed as a power of 2. A value of 16
at the CMTS indicates that a proprietary adaptive retry
mechanism is… | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.10 |
| docsIfUpChannelScdmaActiveCodes Applicable for SCDMA channel types only.
Number of active codes. Returns zero for
Non-SCDMA channel types. Note that legal
values from 64..128 MUST be non-prime. | column | Unsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.11 |
| docsIfUpChannelScdmaCodesPerSlot Applicable for SCDMA channel types only.
The number of SCDMA codes per mini-slot.
Returns zero if the value is undefined or unknown or in
case of a TDMA or ATDMA ch… | column | codesperMinislots Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.12 |
| docsIfUpChannelScdmaFrameSize Applicable for SCDMA channel types only.
SCDMA Frame size in units of spreading intervals.
This value returns zero for non-SCDMA Profiles. | column | spreadIntervals Unsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.13 |
| docsIfUpChannelScdmaHoppingSeed Applicable for SCDMA channel types only.
15-bit seed used for code hopping sequence initialization.
Returns zero for non-SCDMA channel types.
Setting this value to a value differe… | column | Unsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.14 |
| docsIfUpChannelType Reflects the Upstream channel type.
This object returns the value of docsIfCmtsModChannelType
for the modulation profile selected in
docsIfUpChannelModulationProfile for this row. | column | DocsisUpstreamType | .1.3.6.1.2.1.10.127.1.1.2.1.15 |
| docsIfUpChannelCloneFrom This object contains the ifIndex value of the physical
interface row entry whose parameters are to be adjusted.
Upon setting this object to the ifIndex value of a
p… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.127.1.1.2.1.16 |
| docsIfUpChannelUpdate Used to perform the copy of adjusted parameters from the
temporary interface entry to the physical interface
indicated by the docsIfUpChannelCloneFrom object. The
transfer is ini… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.127.1.1.2.1.17 |
| docsIfUpChannelStatus This object is only used for the creation of a temporary
upstream row with the purpose of updating the parameters
of a physical upstream channel entry.
The followin… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.127.1.1.2.1.18 |
| docsIfUpChannelPreEqEnable At the CMTS, this object is used to enable or disable
pre-equalization on the upstream channel represented by
this table instance. At the CM, this object is read-only
and reflect… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.127.1.1.2.1.19 |
| docsIfUpChannelFrequency The center of the frequency band associated with this
upstream interface. This object returns 0 if the frequency
is undefined or unknown. Minimum permitted upstream
frequency is… | column | hertz Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.2 |
| docsIfUpChannelWidth The bandwidth of this upstream interface. This object
returns 0 if the interface width is undefined or unknown.
Minimum permitted interface width is currently 200,000 Hz.
See the… | column | hertz Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.3 |
| docsIfUpChannelSlotSize Applicable to TDMA and ATDMA channel types only.
The number of 6.25 microsecond ticks in each upstream
mini-slot. Returns zero if the value is undefined or
unknown or in case of … | column | ticks SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.5 |
| docsIfUpChannelTxTimingOffset At the CM, a measure of the current round trip time
obtained from the ranging offset (initial ranging offset +
ranging offset adjustments).
At the CMTS, the maximum of timing offs… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.6 |
| docsIfUpChannelRangingBackoffStart The initial random backoff window to use when retrying
Ranging Requests. Expressed as a power of 2. A value of
16 at the CMTS indicates that a proprietary adaptive retry
mechani… | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.7 |
| docsIfUpChannelRangingBackoffEnd The final random backoff window to use when retrying
Ranging Requests. Expressed as a power of 2. A value of
16 at the CMTS indicates that a proprietary adaptive retry
mechanism… | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.8 |
| docsIfUpChannelTxBackoffStart The initial random backoff window to use when retrying
transmissions. Expressed as a power of 2. A value of 16
at the CMTS indicates that a proprietary adaptive retry
mechanism … | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.9 |