docsIfUpChannelSlotSize
DOCS-IF-MIB ·
.1.3.6.1.2.1.10.127.1.1.2.1.5
Object
Applicable to TDMA and ATDMA channel types only. The number of 6.25 microsecond ticks in each upstream mini-slot. Returns zero if the value is undefined or unknown or in case of an SCDMA channel. See the associated conformance object for write conditions and limitations.
Context
- MIB
- DOCS-IF-MIB
- OID
.1.3.6.1.2.1.10.127.1.1.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- ticks
- Parent
- docsIfUpstreamChannelEntry
- Table
- docsIfUpstreamChannelTable
- Siblings
- 18
Syntax
ticks SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfUpChannelId The CMTS identification of the upstream channel. | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.1 |
| docsIfUpChannelTxBackoffEnd The final random backoff window to use when retrying
transmissions. Expressed as a power of 2. A value of 16
at the CMTS indicates that a proprietary adaptive retry
mechanism is… | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.10 |
| docsIfUpChannelScdmaActiveCodes Applicable for SCDMA channel types only.
Number of active codes. Returns zero for
Non-SCDMA channel types. Note that legal
values from 64..128 MUST be non-prime. | column | Unsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.11 |
| docsIfUpChannelScdmaCodesPerSlot Applicable for SCDMA channel types only.
The number of SCDMA codes per mini-slot.
Returns zero if the value is undefined or unknown or in
case of a TDMA or ATDMA ch… | column | codesperMinislots Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.12 |
| docsIfUpChannelScdmaFrameSize Applicable for SCDMA channel types only.
SCDMA Frame size in units of spreading intervals.
This value returns zero for non-SCDMA Profiles. | column | spreadIntervals Unsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.13 |
| docsIfUpChannelScdmaHoppingSeed Applicable for SCDMA channel types only.
15-bit seed used for code hopping sequence initialization.
Returns zero for non-SCDMA channel types.
Setting this value to a value differe… | column | Unsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.14 |
| docsIfUpChannelType Reflects the Upstream channel type.
This object returns the value of docsIfCmtsModChannelType
for the modulation profile selected in
docsIfUpChannelModulationProfile for this row. | column | DocsisUpstreamType | .1.3.6.1.2.1.10.127.1.1.2.1.15 |
| docsIfUpChannelCloneFrom This object contains the ifIndex value of the physical
interface row entry whose parameters are to be adjusted.
Upon setting this object to the ifIndex value of a
p… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.127.1.1.2.1.16 |
| docsIfUpChannelUpdate Used to perform the copy of adjusted parameters from the
temporary interface entry to the physical interface
indicated by the docsIfUpChannelCloneFrom object. The
transfer is ini… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.127.1.1.2.1.17 |
| docsIfUpChannelStatus This object is only used for the creation of a temporary
upstream row with the purpose of updating the parameters
of a physical upstream channel entry.
The followin… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.127.1.1.2.1.18 |
| docsIfUpChannelPreEqEnable At the CMTS, this object is used to enable or disable
pre-equalization on the upstream channel represented by
this table instance. At the CM, this object is read-only
and reflect… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.127.1.1.2.1.19 |
| docsIfUpChannelFrequency The center of the frequency band associated with this
upstream interface. This object returns 0 if the frequency
is undefined or unknown. Minimum permitted upstream
frequency is… | column | hertz Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.2 |
| docsIfUpChannelWidth The bandwidth of this upstream interface. This object
returns 0 if the interface width is undefined or unknown.
Minimum permitted interface width is currently 200,000 Hz.
See the… | column | hertz Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.3 |
| docsIfUpChannelModulationProfile An entry identical to the docsIfModIndex in the
docsIfCmtsModulationTable that describes this channel.
This channel is further instantiated there by a grouping
of interval usage c… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.4 |
| docsIfUpChannelTxTimingOffset At the CM, a measure of the current round trip time
obtained from the ranging offset (initial ranging offset +
ranging offset adjustments).
At the CMTS, the maximum of timing offs… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.127.1.1.2.1.6 |
| docsIfUpChannelRangingBackoffStart The initial random backoff window to use when retrying
Ranging Requests. Expressed as a power of 2. A value of
16 at the CMTS indicates that a proprietary adaptive retry
mechani… | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.7 |
| docsIfUpChannelRangingBackoffEnd The final random backoff window to use when retrying
Ranging Requests. Expressed as a power of 2. A value of
16 at the CMTS indicates that a proprietary adaptive retry
mechanism… | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.8 |
| docsIfUpChannelTxBackoffStart The initial random backoff window to use when retrying
transmissions. Expressed as a power of 2. A value of 16
at the CMTS indicates that a proprietary adaptive retry
mechanism … | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.2.1.9 |