docsIfDownChannelWidth
DOCS-IF-MIB ·
.1.3.6.1.2.1.10.127.1.1.1.1.3
Object
column
r/w
hertz Integer32
The bandwidth of this downstream channel. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). See the associated compliance object for a description of the valid channel widths for this object.
Context
- MIB
- DOCS-IF-MIB
- OID
.1.3.6.1.2.1.10.127.1.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- hertz
- Parent
- docsIfDownstreamChannelEntry
- Table
- docsIfDownstreamChannelTable
- Siblings
- 7
Syntax
hertz Integer32
Values & Constraints
Object Constraints
range: 0-16000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfDownChannelId The Cable Modem Termination System identification of the
downstream channel within this particular MAC interface.
if the interface is down, the object returns the most
current val… | column | Integer32 | .1.3.6.1.2.1.10.127.1.1.1.1.1 |
| docsIfDownChannelFrequency The center of the downstream frequency associated with
this channel. This object will return the current tuner
frequency. If a CMTS provides IF output, this objec… | column | hertz Integer32 | .1.3.6.1.2.1.10.127.1.1.1.1.2 |
| docsIfDownChannelModulation The modulation type associated with this downstream
channel. If the interface is down, this object either
returns the configured value (CMTS), the most current
value (CM), or the… | column | Enumeration | .1.3.6.1.2.1.10.127.1.1.1.1.4 |
| docsIfDownChannelInterleave The Forward Error Correction (FEC) interleaving used
for this downstream channel.
Values are defined as follows:
taps8Increment16(3): protection 5.9/4.1 usec,
… | column | Enumeration | .1.3.6.1.2.1.10.127.1.1.1.1.5 |
| docsIfDownChannelPower At the CMTS, the operational transmit power. At the CM,
the received power level.
If the interface is down, this object either returns
the configured value (CMTS), the most curre… | column | dBmV TenthdBmV | .1.3.6.1.2.1.10.127.1.1.1.1.6 |
| docsIfDownChannelAnnex The value of this object indicates the conformance of
the implementation to important regional cable standards.
annexA : Annex A from ITU-T J.83 is used.
(equivalent to E… | column | Enumeration | .1.3.6.1.2.1.10.127.1.1.1.1.7 |
| docsIfDownChannelStorageType The storage type for this conceptual row.
Entries with this object set to permanent(4)
do not require write operations for read-write
objects. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.127.1.1.1.1.8 |