DOCS-IF-MIB
Monitored by Observium This is the MIB Module for DOCSIS 2.0-compliant Radio
Frequency (RF) interfaces in Cable Modems and
Cable Modem Termination Systems.
Copyright (C) The Internet Society (2006). This
version of this MIB module is part of RFC 4546; see
the RFC itself for full legal notices.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Sensors
Explore Observium network monitoring
- Source file
DOCS-IF-MIB- Last revised
- Identity
docsIfMib- Base OID
1.3.6.1.2.1.10.127
Imported Objects
| IANAifType-MIB | IANAifType |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks transmission Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeInterval TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DOCS-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DOCS-IF-MIB::docsIfMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DOCS-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DOCS-IF-MIB::docsIfMib'
Objects (230)
1 directly used by Observium
Showing 230 of 230 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.127 |
||
.1.3.6.1.2.1.10.127.1 |
||
.1.3.6.1.2.1.10.127.1.1 |
||
.1.3.6.1.2.1.10.127.1.1.1 |
||
.1.3.6.1.2.1.10.127.1.1.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.1.1.1.1 |
|
|
hertzInteger32
|
.1.3.6.1.2.1.10.127.1.1.1.1.2 |
|
|
hertzInteger32
|
.1.3.6.1.2.1.10.127.1.1.1.1.3 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.1.1.1.4 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.1.1.1.5 |
|
|
dBmVTenthdBmV
|
.1.3.6.1.2.1.10.127.1.1.1.1.6 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.1.1.1.7 |
|
.1.3.6.1.2.1.10.127.1.1.1.1.8 |
||
.1.3.6.1.2.1.10.127.1.1.2 |
||
.1.3.6.1.2.1.10.127.1.1.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.1.2.1.1 |
|
|
Integer32
|
.1.3.6.1.2.1.10.127.1.1.2.1.10 |
|
|
Unsigned32
|
.1.3.6.1.2.1.10.127.1.1.2.1.11 |
|
|
codesperMinislotsInteger32
|
.1.3.6.1.2.1.10.127.1.1.2.1.12 |
|
|
spreadIntervalsUnsigned32
|
.1.3.6.1.2.1.10.127.1.1.2.1.13 |
|
|
Unsigned32
|
.1.3.6.1.2.1.10.127.1.1.2.1.14 |
|
.1.3.6.1.2.1.10.127.1.1.2.1.15 |
||
.1.3.6.1.2.1.10.127.1.1.2.1.16 |
||
.1.3.6.1.2.1.10.127.1.1.2.1.17 |
||
.1.3.6.1.2.1.10.127.1.1.2.1.18 |
||
.1.3.6.1.2.1.10.127.1.1.2.1.19 |
||
|
hertzInteger32
|
.1.3.6.1.2.1.10.127.1.1.2.1.2 |
|
|
hertzInteger32
|
.1.3.6.1.2.1.10.127.1.1.2.1.3 |
|
.1.3.6.1.2.1.10.127.1.1.2.1.4 |
||
|
ticksSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.10.127.1.1.2.1.5 |
|
.1.3.6.1.2.1.10.127.1.1.2.1.6 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.1.2.1.7 |
|
|
Integer32
|
.1.3.6.1.2.1.10.127.1.1.2.1.8 |
|
|
Integer32
|
.1.3.6.1.2.1.10.127.1.1.2.1.9 |
|
.1.3.6.1.2.1.10.127.1.1.3 |
||
.1.3.6.1.2.1.10.127.1.1.3.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.1.3.1.1 |
|
.1.3.6.1.2.1.10.127.1.1.3.1.10 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.1.3.1.2 |
|
|
bits per secondInteger32
|
.1.3.6.1.2.1.10.127.1.1.3.1.3 |
|
|
bits per secondInteger32
|
.1.3.6.1.2.1.10.127.1.1.3.1.4 |
|
|
bits per secondInteger32
|
.1.3.6.1.2.1.10.127.1.1.3.1.5 |
|
|
|
mini-slotsInteger32
|
.1.3.6.1.2.1.10.127.1.1.3.1.6 |
.1.3.6.1.2.1.10.127.1.1.3.1.7 |
||
.1.3.6.1.2.1.10.127.1.1.3.1.8 |
||
|
bytesInteger32
|
.1.3.6.1.2.1.10.127.1.1.3.1.9 |
|
.1.3.6.1.2.1.10.127.1.1.4 |
||
.1.3.6.1.2.1.10.127.1.1.4.1 |
||
.1.3.6.1.2.1.10.127.1.1.4.1.1 |
||
|
codewordsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.1.4.1.10 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.1.4.1.2 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.1.4.1.3 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.1.4.1.4 |
|
|
|
TenthdBTenthdB
|
.1.3.6.1.2.1.10.127.1.1.4.1.5 |
|
-dBcInteger32
|
.1.3.6.1.2.1.10.127.1.1.4.1.6 |
|
.1.3.6.1.2.1.10.127.1.1.4.1.7 |
||
|
codewordsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.1.4.1.8 |
|
|
codewordsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.1.4.1.9 |
|
.1.3.6.1.2.1.10.127.1.1.5 |
||
.1.3.6.1.2.1.10.127.1.2 |
||
.1.3.6.1.2.1.10.127.1.2.1 |
||
.1.3.6.1.2.1.10.127.1.2.1.1 |
||
.1.3.6.1.2.1.10.127.1.2.1.1.1 |
||
|
Bits
|
.1.3.6.1.2.1.10.127.1.2.1.1.2 |
|
|
|
.1.3.6.1.2.1.10.127.1.2.1.1.3 |
|
|
HundredOfSecondsSNMPv2-TCTimeInterval
|
.1.3.6.1.2.1.10.127.1.2.1.1.4 |
|
.1.3.6.1.2.1.10.127.1.2.2 |
||
.1.3.6.1.2.1.10.127.1.2.2.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.2.2.1.1 |
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.10 |
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.11 |
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.12 |
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.13 |
|
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.14 |
|
.1.3.6.1.2.1.10.127.1.2.2.1.15 |
||
.1.3.6.1.2.1.10.127.1.2.2.1.16 |
||
.1.3.6.1.2.1.10.127.1.2.2.1.17 |
||
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.18 |
|
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.19 |
|
|
OctetString
|
.1.3.6.1.2.1.10.127.1.2.2.1.2 |
|
|
TenthdBmVTenthdBmV
|
.1.3.6.1.2.1.10.127.1.2.2.1.3 |
|
|
resetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.4 |
|
.1.3.6.1.2.1.10.127.1.2.2.1.5 |
||
.1.3.6.1.2.1.10.127.1.2.2.1.6 |
||
|
messagesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.7 |
|
|
messagesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.8 |
|
|
messagesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.2.1.9 |
|
.1.3.6.1.2.1.10.127.1.2.3 |
||
.1.3.6.1.2.1.10.127.1.2.3.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.2.3.1.1 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.2.3.1.10 |
|
|
Integer32
|
.1.3.6.1.2.1.10.127.1.2.3.1.2 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.3.1.3 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.3.1.4 |
|
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.3.1.5 |
|
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.3.1.6 |
|
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.3.1.7 |
|
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.2.3.1.8 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.2.3.1.9 |
|
.1.3.6.1.2.1.10.127.1.3 |
||
.1.3.6.1.2.1.10.127.1.3.1 |
||
.1.3.6.1.2.1.10.127.1.3.1.1 |
||
|
Bits
|
.1.3.6.1.2.1.10.127.1.3.1.1.1 |
|
|
MillisecondsInteger32
|
.1.3.6.1.2.1.10.127.1.3.1.1.2 |
|
|
MillisecondsInteger32
|
.1.3.6.1.2.1.10.127.1.3.1.1.3 |
|
|
SIDsInteger32
|
.1.3.6.1.2.1.10.127.1.3.1.1.4 |
|
|
|
.1.3.6.1.2.1.10.127.1.3.1.1.5 |
|
|
attemptsInteger32
|
.1.3.6.1.2.1.10.127.1.3.1.1.6 |
|
|
HundredOfSecondsSNMPv2-TCTimeInterval
|
.1.3.6.1.2.1.10.127.1.3.1.1.7 |
|
.1.3.6.1.2.1.10.127.1.3.1.1.8 |
||
.1.3.6.1.2.1.10.127.1.3.10 |
||
.1.3.6.1.2.1.10.127.1.3.10.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.10.1.1 |
|
|
BytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.10.1.2 |
|
|
BytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.10.1.3 |
|
|
BytesSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.10.1.4 |
|
|
BytesSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.10.1.5 |
|
.1.3.6.1.2.1.10.127.1.3.11 |
||
.1.3.6.1.2.1.10.127.1.3.11.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.11.1.1 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.10 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.11 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.12 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.13 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.14 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.15 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.16 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.17 |
|
.1.3.6.1.2.1.10.127.1.3.11.1.18 |
||
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.19 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.2 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.20 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.21 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.22 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.23 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.24 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.25 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.26 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.27 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.28 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.29 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.3 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.4 |
|
|
mini-slotsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.11.1.5 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.6 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.7 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.8 |
|
|
mini-slotsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.11.1.9 |
|
.1.3.6.1.2.1.10.127.1.3.2 |
||
.1.3.6.1.2.1.10.127.1.3.2.1 |
||
|
messagesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.2.1.1 |
|
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.2.1.2 |
|
|
messagesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.2.1.3 |
|
|
attemptsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.2.1.4 |
|
|
messagesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.2.1.5 |
|
|
timeoutsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.2.1.6 |
|
.1.3.6.1.2.1.10.127.1.3.3 |
||
.1.3.6.1.2.1.10.127.1.3.3.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.3.1.1 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.3.1.10 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.3.1.11 |
|
|
codewordsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.3.1.12 |
|
|
TenthdBTenthdB
|
.1.3.6.1.2.1.10.127.1.3.3.1.13 |
|
|
-dBcInteger32
|
.1.3.6.1.2.1.10.127.1.3.3.1.14 |
|
|
codewordsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.3.1.15 |
|
|
codewordsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.3.1.16 |
|
|
codewordsSNMPv2-SMICounter64
|
.1.3.6.1.2.1.10.127.1.3.3.1.17 |
|
.1.3.6.1.2.1.10.127.1.3.3.1.18 |
||
.1.3.6.1.2.1.10.127.1.3.3.1.19 |
||
.1.3.6.1.2.1.10.127.1.3.3.1.2 |
||
.1.3.6.1.2.1.10.127.1.3.3.1.20 |
||
.1.3.6.1.2.1.10.127.1.3.3.1.21 |
||
.1.3.6.1.2.1.10.127.1.3.3.1.22 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.127.1.3.3.1.23 |
|
|
|
.1.3.6.1.2.1.10.127.1.3.3.1.3 |
|
.1.3.6.1.2.1.10.127.1.3.3.1.4 |
||
.1.3.6.1.2.1.10.127.1.3.3.1.5 |
||
|
ThenthdBmVTenthdBmV
|
.1.3.6.1.2.1.10.127.1.3.3.1.6 |
|
|
Unsigned32
|
.1.3.6.1.2.1.10.127.1.3.3.1.7 |
|
.1.3.6.1.2.1.10.127.1.3.3.1.8 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.3.3.1.9 |
|
.1.3.6.1.2.1.10.127.1.3.4 |
||
.1.3.6.1.2.1.10.127.1.3.4.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.4.1.1 |
|
|
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.4.1.2 |
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.3.4.1.3 |
|
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.4.1.4 |
|
.1.3.6.1.2.1.10.127.1.3.4.1.5 |
||
|
BytesSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.4.1.6 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.127.1.3.4.1.7 |
|
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.4.1.8 |
|
.1.3.6.1.2.1.10.127.1.3.5 |
||
.1.3.6.1.2.1.10.127.1.3.5.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.5.1.1 |
|
|
mini-slotsInteger32
|
.1.3.6.1.2.1.10.127.1.3.5.1.10 |
|
|
Symbol-timesSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.10.127.1.3.5.1.11 |
|
.1.3.6.1.2.1.10.127.1.3.5.1.12 |
||
.1.3.6.1.2.1.10.127.1.3.5.1.13 |
||
.1.3.6.1.2.1.10.127.1.3.5.1.14 |
||
.1.3.6.1.2.1.10.127.1.3.5.1.15 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.3.5.1.16 |
|
.1.3.6.1.2.1.10.127.1.3.5.1.17 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.127.1.3.5.1.18 |
|
.1.3.6.1.2.1.10.127.1.3.5.1.19 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.3.5.1.2 |
|
|
Unsigned32
|
.1.3.6.1.2.1.10.127.1.3.5.1.20 |
|
.1.3.6.1.2.1.10.127.1.3.5.1.21 |
||
.1.3.6.1.2.1.10.127.1.3.5.1.22 |
||
.1.3.6.1.2.1.10.127.1.3.5.1.3 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.127.1.3.5.1.4 |
|
|
bitsInteger32
|
.1.3.6.1.2.1.10.127.1.3.5.1.5 |
|
.1.3.6.1.2.1.10.127.1.3.5.1.6 |
||
|
BytesInteger32
|
.1.3.6.1.2.1.10.127.1.3.5.1.7 |
|
|
BytesInteger32
|
.1.3.6.1.2.1.10.127.1.3.5.1.8 |
|
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.5.1.9 |
|
|
Bits
|
.1.3.6.1.2.1.10.127.1.3.6 |
|
.1.3.6.1.2.1.10.127.1.3.7 |
||
.1.3.6.1.2.1.10.127.1.3.7.1 |
||
.1.3.6.1.2.1.10.127.1.3.7.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.7.1.2 |
|
|
secondsInteger32
|
.1.3.6.1.2.1.10.127.1.3.8 |
|
.1.3.6.1.2.1.10.127.1.3.9 |
||
.1.3.6.1.2.1.10.127.1.3.9.1 |
||
.1.3.6.1.2.1.10.127.1.3.9.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.127.1.3.9.1.2 |
|
|
percentInteger32
|
.1.3.6.1.2.1.10.127.1.3.9.1.3 |
|
.1.3.6.1.2.1.10.127.2 |
||
.1.3.6.1.2.1.10.127.3 |
||
.1.3.6.1.2.1.10.127.3.1 |
||
.1.3.6.1.2.1.10.127.3.2 |
Dependencies (7) 6 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- DOCS-IF-MIBrfcselected
Type Definitions (6)
| OctetString |
range: 0range: 36..260 |
|
| Enumeration |
docsis10(1)docsis11(2) |
|
| Enumeration |
unknown(0)tdma(1)atdma(2)scdma(3)tdmaAndAtdma(4) |
|
| Enumeration |
docsis10(1)docsis11(2)docsis20(3) |
|
| Integer32 | ||
| Integer32 |
Conformance Groups (7)
Compliance Statements (2)
OID
.1.3.6.1.2.1.10.127.3.1.1The compliance statement for devices that implement
DOCSIS 1.x compliant Radio Frequency Interfaces.
DOCSIS 1.x compliant Radio Frequency Interfaces.
Required groups
| mandatory | docsIfBasicGroup | |
| optional | docsIfCmGroup |
This group is implemented only in cable modems, not in cable modem termination systems. |
| optional | docsIfCmtsGroup |
This group is implemented only in cable modem termination systems, not in cable modems. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| docsIfDownChannelFrequency | readonly | Read-write in cable modem termination systems; read-only in cable modems. The values above are appropriate for a cable plant using a Sub-Split channel plan. If DOCSIS is extended to cover other types of channel plans (and frequency allocations), this object will be modified accordingly. |
|
| docsIfDownChannelWidth | readonly | It is important to implement this object as read-only. In cable modems, this object is always implemented as read-only. The above value is appropriate for cable plants running under NTSC (National Television Standards Committee) standards. If DOCSIS is extended to work with other standards (e.g., European standards), this object will be modified accordingly. |
|
| docsIfDownChannelModulation | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfDownChannelInterleave | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfDownChannelPower | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelFrequency | readonly | Read-write in cable modem termination systems; read-only in cable modems. The values above are appropriate for a cable plant using a Sub-Split channel plan. If DOCSIS is extended to cover other types of channel plans (and frequency allocations), this object will be modified accordingly. |
|
| docsIfUpChannelWidth | readonly | Read-write in cable modem termination systems; read-only in cable modems. The above value is appropriate for cable plants running under NTSC (National Television Standards Committee) standards. If DOCSIS is extended to work with other standards (e.g., European standards), this object will be modified accordingly. |
|
| docsIfUpChannelModulationProfile | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelSlotSize | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfUpChannelRangingBackoffStart | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelRangingBackoffEnd | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelTxBackoffStart | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelTxBackoffEnd | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfQosProfPriority | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfMaxUpBandwidth | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfGuarUpBandwidth | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfMaxDownBandwidth | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfMaxTxBurst | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfBaselinePrivacy | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfStatus | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfCmtsServiceAdminStatus | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsSyncInterval | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsUcdInterval | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsInsertInterval | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsInvitedRangingAttempts | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsQosProfilePermissions | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsModType | A management station MAY only set 16QAM or QPSK modulation, but others might be possible, based on device configuration. |
||
| docsIfCmtsModPreambleLen |
Integer32
|
The range of the values for this MODULE-COMPLIANCE is 0..1024. |
|
| docsIfCmtsModFECErrorCorrection |
Integer32
|
The range of the values for this MODULE-COMPLIANCE is 0..10. |
OID
.1.3.6.1.2.1.10.127.3.1.2The compliance statement for devices that implement
DOCSIS 2.0 Radio Frequency Interfaces.
DOCSIS 2.0 Radio Frequency Interfaces.
Required groups
| mandatory | docsIfBasicGroupV2 | |
| optional | docsIfCmGroupV2 |
This group is implemented only in cable modems, not in cable modem termination systems. |
| optional | docsIfCmtsGroupV2 |
This group is implemented only in cable modem termination systems, not in cable modems. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| docsIfDownChannelFrequency | readonly | Read-write in cable modem termination systems; read-only in cable modems. A range of 54MHz to 860MHz is appropriate for a cable plant using a North American Sub-Split channel plan. The spectrum range has been expanded to accommodate a lower edge of 47MHz and an upper edge of 862MHz for some European channel plans. If DOCSIS is extended to cover other types of channel plans (and frequency allocations), this object will be modified accordingly. |
|
| docsIfDownChannelWidth | readonly | It is important to implement this object as read-only. In cable modems, this object is always implemented as read-only. The value of 6 MHz is appropriate for cable plants running under NTSC (National Television Standards Committee) standards. The value of 8 MHz is appropriate for cable plants running under ETSI standards. For other regional standards, this object will be modified accordingly. |
|
| docsIfDownChannelModulation | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfDownChannelInterleave | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfDownChannelPower | readonly | Read-write in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelFrequency | readonly | Read-create in cable modem termination systems; read-only in cable modems. A range of 5MHz to 42MHz is appropriate for a cable plant using a North American Sub-Split channel plan. The spectrum range has been expanded to accommodate an upper edge of 65MHz for some European channel plans. If DOCSIS is extended to cover other types of channel plans (and frequency allocations), this object will be modified accordingly. |
|
| docsIfUpChannelWidth | readonly | Read-create in cable modem termination systems, read-only in cable modems. The above value is appropriate for cable plants running under NTSC (National Television Standards Committee) standards. If DOCSIS is extended to work with other standards (e.g., European standards), this object will be modified accordingly. |
|
| docsIfUpChannelModulationProfile | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelSlotSize | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfUpChannelRangingBackoffStart | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelRangingBackoffEnd | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelTxBackoffStart | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelTxBackoffEnd | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelScdmaActiveCodes | readonly | Read-create in cable modem termination systems; read-only in cable modems. The number of active codes when SCDMA is in use MUST range from 64 to 128 and MUST be a non-Prime value. Providing this range allows for the following features and capabilities: 1) Power management in S-CDMA spreader-on frames (with a 3 dB spread). 2) Avoidance of code 0. 3) Flexible mini-slot sizes with and without the use of code 0. |
|
| docsIfUpChannelScdmaCodesPerSlot | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelScdmaFrameSize | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelScdmaHoppingSeed | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelCloneFrom | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelUpdate | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfUpChannelStatus | readonly | Read-create in Cable Modem Termination Systems; read-only in Cable Modems. Entries associated to physical interfaces only support the read-only value 'active'. |
|
| docsIfUpChannelPreEqEnable | readonly | Read-create in cable modem termination systems; read-only in cable modems. |
|
| docsIfQosProfPriority | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfMaxUpBandwidth | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfGuarUpBandwidth | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfMaxDownBandwidth | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfBaselinePrivacy | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfStatus | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfQosProfMaxTransmitBurst | readonly | This object is always read-only in cable modems. It is compliant to implement this object as read-only in cable modem termination systems. |
|
| docsIfCmRangingTimeout | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmStatusModulationType |
unknown(0), tdma(1), atdma(2), scdma(3)
|
CM does not use both modulation burst profiles of a 'tdmAndAtdma' ChannelType; therefore, 'tdmAndAtdma'is not supported. |
|
| docsIfCmtsServiceAdminStatus | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsSyncInterval | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsUcdInterval | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsInsertInterval | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsInvitedRangingAttempts | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsQosProfilePermissions | readonly | It is compliant to implement this object as read-only. | |
| docsIfCmtsModType | A management station MAY only set 64QAM, 16QAM, or QPSK modulation for Time or Code division Multiple Access, but others might be possible based on device configuration. |
||
| docsIfCmtsCmStatusModulationType |
unknown(0), tdma(1), atdma(2), scdma(3)
|
CM does not use both modulation burst profiles of a 'tdmAndAtdma' ChannelType; therefore, 'tdmAndAtdma'is not supported. |