CISCO-WAN-SVC-MIB Table View

The Interface configuration table collects 
attributes that affect the operation of the 
controller interface. There is a single row
for each interface that the managed system 
is expected to be added or managed.

cwspConfigEntry row .1.3.6.1.4.1.351.140.1.2.1.1.1

An entry in the interface configuration table containing
information about an interface

Indexes

IF-MIBifIndex

Column	Syntax	OID
cwspAdminStatus The administrative status of the interface. inService (1) means that the interface is operational while outService (2) indicates that the interface is put out of service by the administrator.	Enumerationr/w Enumerated Values: 1 inService 2 outService	.1.3.6.1.4.1.351.140.1.2.1.1.1.1
cwspOperStatus The operational state of the interface. This status is derived from the physical state of the interface. failed (2) indicates that the interface has failed. ok (1) indicates that the interface is in operational statu…	Enumeration Enumerated Values: 1 ok 2 failed 3 other	.1.3.6.1.4.1.351.140.1.2.1.1.1.2
cwspSvcBlocked Indicates whether Switches virtual connections are allowed through this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.3
cwspSpvcBlocked Indicates whether soft permanent virtual connections are allowed through this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.4
cwspIlmiAddrRegEnable Indicates whether ILMI address registration is enabled or disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.5
cwspIlmiAutoConfEnable Indicates whether auto-configuration of the interface is turned on or off. If auto-configuration is enabled, then the interface comes up using the ILMI auto-configuration.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.6
cwspIlmiServRegEnable Indicates whether service registry is enabled or disabled on the interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.7
cwspPhyIdentifier Indicates the physical identification of the interface. Mandatory when the port is provisioned for the first time through SNMP.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.351.140.1.2.1.1.1.8
cwspSignallingVpi Denotes the Signaling VPI used on the interface.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.351.140.1.2.1.1.1.9
cwspSignallingVci Indicates the signaling VCI used on the interface, acceptable value is 32-65535, and 5 being the default.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.1.1.1.10
cwspRoutingVpi Indicates the VPI used for PNNI lowest level RCC.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.351.140.1.2.1.1.1.11
cwspRoutingVci Indicates the VCI used for the PNNI lowest level RCC, acceptable value is 32-65535, and 18 being the default.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.1.1.1.12
cwspMaxVpiBits The maximum number of active VPI bits on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), this value has no meaning and is set to zero.	Integer32 Constraints: range: 0-12	.1.3.6.1.4.1.351.140.1.2.1.1.1.13
cwspMaxVciBits The maximum number of active VCI bits on this ATM Interface.	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.351.140.1.2.1.1.1.14
cwspUniVersion An indication of the latest version of the ATM Forum UNI Signaling Specification that is supported on this ATM Interface. If this value is not present, a version of the UNI earlier than 3.1 is supported. …	Enumerationr/w Enumerated Values: 1 uni20 2 uni30 3 uni31 4 uni40 5 ituDss2 6 frf4 7 unsupported 8 ip 9 self	.1.3.6.1.4.1.351.140.1.2.1.1.1.15
cwspNniVersion An indication of the latest version of the ATM Forum PNNI Signaling Specification that is supported on this ATM Interface. Note that the PNNI routing version is not determined through ILMI. If the peer IME's value of th…	Enumerationr/w Enumerated Values: 1 iisp30 2 iisp31 3 pnni10 4 enni 5 aini 7 unsupported	.1.3.6.1.4.1.351.140.1.2.1.1.1.16
cwspUniType The type of the ATM device, either public or private.	Enumerationr/w Enumerated Values: 1 public 2 private	.1.3.6.1.4.1.351.140.1.2.1.1.1.17
cwspSide This object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type can be determined. An ATM End System shal…	Enumerationr/w Enumerated Values: 1 user 2 network	.1.3.6.1.4.1.351.140.1.2.1.1.1.18
cwspMaxP2pCalls Indicates the maximum number of point to point calls (including VCs and VPs allowed on the interface.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.1.1.1.19
cwspMaxP2mpRoots Indicates the maximum number of root VCs (for point-to-multipoint) allowed on the interface.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.1.1.1.20
cwspMaxP2mpLeafs Indicates the maximum number of leaf VCs (for point-to-multipoint) allowed on the interface.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.1.1.1.21
cwspMinSvccVpi Indicates the minimum SVCC VPI configured on the interface.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.351.140.1.2.1.1.1.22
cwspMaxSvccVpi Indicates the maximum SVCC VPI configured on the interface.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.351.140.1.2.1.1.1.23
cwspMinSvccVci Indicates the minimum SVCC VCI configured on the interface.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.1.1.1.24
cwspMaxSvccVci Indicates the maximum SVCC VCI configured on the interface.	Integer32r/w Constraints: range: 35-65535	.1.3.6.1.4.1.351.140.1.2.1.1.1.25
cwspMinSvpcVpi Indicates the minimum SVPC VPI configured on the interface.	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.351.140.1.2.1.1.1.26
cwspMaxSvpcVpi Indicates the maximum SVPC VPI configured on the interface.	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.351.140.1.2.1.1.1.27
cwspEnhancedIisp Indicates whether the enhanced features for IISP are enabled or disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.28
cwspConfigTableRowStatus Used to create and delete the Interface. However, only createAndGo, destroy, active and notInService are supported. NMS should only use createAndGo to create a row and destroy to delete a row. The managed device will ei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.351.140.1.2.1.1.1.29
cwspAddrPlanSupported The ATM address plan supported on an interface. This can only be modified if interface is public UNI. For all other interfaces, the value is aesa.	Enumerationr/w Enumerated Values: 1 both 2 aesa 3 e164	.1.3.6.1.4.1.351.140.1.2.1.1.1.30
cwspIlmiSecureLink Indicates whether ILMI Secure Link Protocol is enabled or disabled. When secure link protocol is enabled, loss in ILMI connectivity is treated as loss of attachment point which results in all SVCs/SVPs being released o…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.31
cwspIlmiAttachmentPoint Indicates whether detection of loss of attachment procedures are enabled on this interface. When set to true, then standard ILMI procedures are employed to detect loss of attachment point. If set to false, then ILMI…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.32
cwspIlmiLocalAttrStd Indicates whether on modification of local attributes, procedures as recommended by ILMI 4.0 specification are followed or cisco proprietery procedures are followed. When set to true, the standard ILMI procedures ar…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.33
cwspIlmiUCSMEnable Indicates whether ILMI user connection status monitoring is enabled or disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.1.1.1.34
cwspRoutingPriority This object is the routing priority to be assigned to connections which enter the network from this ingress interface, but does not carry the routing priority signaling in the SETUP message. SETUP message. A default …	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.351.140.1.2.1.1.1.35
cwspSpvcAddress This object identifies the internal NSAP assigned to a port by the switch. a) The format is that of 13-byte node prefix and 7-byte port number. b) When the switch's node prefix is modified, the node…	CISCO-WAN-ATM-CONN-MIBCiscoWanNsapAtmAddress Type Constraints: range: 20	.1.3.6.1.4.1.351.140.1.2.1.1.1.36

A table specifying the CAC(Connection Admission Control)
information for each interface.

cwspCacConfigEntry row .1.3.6.1.4.1.351.140.1.2.2.1.1

An entry contains CAC information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cwspUtilFactorCbr This is the booking factor for CBR service.	Integer32r/w Constraints: range: 1-200	.1.3.6.1.4.1.351.140.1.2.2.1.1.1
cwspUtilFactorRtVbr This is the booking factor for real time VBR service	Integer32r/w Constraints: range: 1-200	.1.3.6.1.4.1.351.140.1.2.2.1.1.2
cwspUtilFactorNrtVbr This is the booking factor for non-real time VBR service	Integer32r/w Constraints: range: 1-200	.1.3.6.1.4.1.351.140.1.2.2.1.1.3
cwspUtilFactorAbr This is the booking factor for ABR service	Integer32r/w Constraints: range: 1-200	.1.3.6.1.4.1.351.140.1.2.2.1.1.4
cwspUtilFactorUbr This is the booking factor for UBR service.	Integer32r/w Constraints: range: 1-200	.1.3.6.1.4.1.351.140.1.2.2.1.1.5
cwspMaxBwCbr This is the maximum bandwidth for CBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.6
cwspMaxBwRtVbr This is the maximum bandwidth for real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.7
cwspMaxBwNrtVbr This is the maximum bandwidth for non-real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.8
cwspMaxBwAbr This is the maximum bandwidth for ABR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.9
cwspMaxBwUbr This is the maximum bandwidth for UBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.10
cwspMinBwCbr This is the minimum bandwidth for CBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value…	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.11
cwspMinBwRtVbr This is the minimum bandwidth for real time VBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. …	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.12
cwspMinBwNrtVbr This is the minimum bandwidth for non-real time VBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. …	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.13
cwspMinBwAbr This is the minimum bandwidth for ABR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%. The value…	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.14
cwspMinBwUbr This is the minimum bandwidth for UBR service in percentage. The value for this variable is always 0.	Integer32 Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.15
cwspMaxVcCbr This is the maximum number of VCs for CBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.16
cwspMaxVcRtVbr This is the maximum number of VCs for real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.17
cwspMaxVcNrtVbr This is the maximum number of VCs for non-real time VBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.000…	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.18
cwspMaxVcAbr This is the maximum number of VCs for ABR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.19
cwspMaxVcUbr This is the maximum number of VCs for UBR service in percentage. The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.20
cwspMinVcCbr This is the minimum number of VCs for CBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. …	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.21
cwspMinVcRtVbr This is the minimum number of VCs for real time VBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. …	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.22
cwspMinVcNrtVbr This is the minimum number of VCs for non-real time VBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr,cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%…	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.23
cwspMinVcAbr This is the minimum number of VCs for ABR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. …	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.24
cwspMinVcUbr This is the minimum number of VCs for UBR service in percentage. The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%. …	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.25
cwspMaxVcBwCbr This is the maximum bandwidth allowed for a VC for real time CBR service. The value is in the unit of cells per second.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.26
cwspMaxVcBwRtVbr This is the maximum bandwidth allowed for a VC for real time VBR service. The value is in the unit of cells per second.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.27
cwspMaxVcBwNrtVbr This is the maximum bandwidth allowed for a VC for non-real time VBR service. The value is in the unit of cells per second.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.28
cwspMaxVcBwAbr This is the maximum bandwidth allowed for a VC for ABR service. The value is in the unit of cells per second.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.29
cwspMaxVcBwUbr This is the maximum bandwidth allowed for UBR service. The value is in the unit of cells per second.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.351.140.1.2.2.1.1.30
cwspDefaultCdvtCbr This is the default CDVT for CBR service.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.2.1.1.31
cwspDefaultCdvtRtVbr This is the default CDVT real time VBR service.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.2.1.1.32
cwspDefaultCdvtNrtVbr This is the default CDVT non-real time VBR service.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.2.1.1.33
cwspDefaultCdvtAbr This is the default CDVT for ABR service.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.2.1.1.34
cwspDefaultCdvtUbr This is the default CDVT for UBR service.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.2.1.1.35
cwspDefaultMbsRtVbr This is the default MBS real time VBR service.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.2.1.1.36
cwspDefaultMbsNrtVbr This is the default MBS non-real time VBR service.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.2.1.1.37

This table specifies signaling
configuration parameters.

cwspSigConfigEntry row .1.3.6.1.4.1.351.140.1.2.3.1.1

An entry in the signaling configuration
table. Each entry indexed by the ifIndex of
a port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cwspSigCfgT301 Timer started when ALERT message received at Call Received State. Normally, timer is stopped when CONNECT message is received. Clear call at first expiry.	secondsInteger32r/w Constraints: range: 150-240	.1.3.6.1.4.1.351.140.1.2.3.1.1.1
cwspSigCfgT303 Timer started when SETUP message sent at Call Present State. Normally, timer is stopped when ALERT, CONNECT, RELEASE COMPLETE or CALL PROCEEDING message is received. Resend SETUP message and restart the timer at fir…	secondsInteger32r/w Constraints: range: 4-8	.1.3.6.1.4.1.351.140.1.2.3.1.1.2
cwspSigCfgT308 Timer started when RELEASE message sent at Release Indication State. Normally, timer is stopped when RELEASE COMPLETE or RELEASE message is received. Resend RELEASE and restart the timer at first expiry; Relea…	secondsInteger32r/w Constraints: range: 20-45	.1.3.6.1.4.1.351.140.1.2.3.1.1.3
cwspSigCfgT310 Timer started when CALL PROCEEDING message received at Incoming Call Proceeding State. Normally, timer is stopped when ALERT, CONNECT or RELEASE message is received. Clear call at first expiry. Range from 10 to 20 se…	secondsInteger32r/w Constraints: range: 10-120	.1.3.6.1.4.1.351.140.1.2.3.1.1.4
cwspSigCfgT316 Timer started when RESTART message sent Restart Request State. Normally, timer is stopped when RESTART ACK message is received. RESTART may be sent multiple times in both first or second expiry.	secondsInteger32r/w Constraints: range: 90-300	.1.3.6.1.4.1.351.140.1.2.3.1.1.5
cwspSigCfgT317 Timer started when RESTART message received at Restart State. Normally, timer is stopped when Internal clearing of call references happen. Maintenance notification at first expiry. The value of this timer should be le…	secondsInteger32r/w Constraints: range: 60-300	.1.3.6.1.4.1.351.140.1.2.3.1.1.6
cwspSigCfgT322 Timer started when STATUS ENQUIRY message sent at any call state. Normally, timer is stopped when STATUS RELEASE or RELEASE COMPLETE message is received. STATUS ENQUIREY message may be resent several times in both fir…	secondsInteger32r/w Constraints: range: 4-20	.1.3.6.1.4.1.351.140.1.2.3.1.1.7
cwspSigCfgT397 Timer started when ALERTING or PARTY ALERTING message received in point-to-multipoint call. Normally timer is stopped when ADD PARTY ACK message is received. Clear party at first expiry.	secondsInteger32r/w Constraints: range: 180-240	.1.3.6.1.4.1.351.140.1.2.3.1.1.8
cwspSigCfgT398 Timer is started when DROP PARTY message sent at Drop Party Initiated State. Normally, timer is stopped when DROP PARTY ACK or RELEASE message is received. Send DROP PARTY ACK or RELEASE at first expiry.	secondsInteger32r/w Constraints: range: 4-20	.1.3.6.1.4.1.351.140.1.2.3.1.1.9
cwspSigCfgT399 Timer is started when ADD PARTY message sent at Add Party Initiated State. Normally, timer is stopped when ADD PARTY ACK, ADD PARTY REJ or RELEASE message is received. Clear the party and enter NULL Party State at fi…	secondsInteger32r/w Constraints: range: 14-124	.1.3.6.1.4.1.351.140.1.2.3.1.1.10

This table specifies SSCOP (Layer 2) 
configuration parameters.

cwspSscopEntry row .1.3.6.1.4.1.351.140.1.2.4.1.1

An entry in the SSCOP configuration table.
Each entry indexed by the ifIndex of a port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cwspSscopTmrCC This object contains the value for Connection control timer.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.4.1.1.1
cwspSscopTmrKeepAlive This object contains the value for keep alive timer	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.4.1.1.2
cwspSscopTmrNoResp This object contains the value for no response timer.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.4.1.1.3
cwspSscopTmrPoll This object contains the value for poll timer.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.4.1.1.4
cwspSscopTmtIdle This object contains the value for idle timer.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.4.1.1.5
cwspSscopMaxCC This object contains the upper limit for the number of transmissions of a BGN, END, ER or RS PDU.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.4.1.1.6
cwspSscopMaxPD This object contains an upper limit for a counter which counts the number of SD PDUs transmitted between transmissions of POLL PDUs or the number of SD PDUs transmitted before the transmission of the first POLL PDU …	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.4.1.1.7
cwspSscopMaxSTAT This object contains an upper limit for the number of list elements placed in a STAT PDU.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.4.1.1.8

This Table contains objects showing the Statistics for 
SVC/SPVC calls on a given interface.

cwspCallStatsEntry row .1.3.6.1.4.1.351.140.1.2.5.1.1

An entry contains SVC/SPVC call statistics

Indexes

IF-MIBifIndex

Column	Syntax	OID
cwspCountReset Writing a 2 to this object resets all counters.	Enumerationr/w Enumerated Values: 1 noop 2 reset	.1.3.6.1.4.1.351.140.1.2.5.1.1.1
cwspInCallAttempts This object shows the number of incoming Signaling messages (Setup and Add Party) received by the switching node on this interface for Call establishment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.2
cwspInCallEstabs This object shows the number of incoming Signaling Messages (Connect and Add Party Ack) received by the switching node on this interface which marks that a call has been successfully established.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.3
cwspInCallFailures This object shows the total number of incoming Point-to-Point (p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts failed on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.4
cwspInFilterFailures This object shows the number of incoming Point-to-Point(p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts which failed due to address filtering on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.5
cwspInRouteFailures This object shows the number of incoming Point-to-Point(p2p) and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this interface which failed because there was no route to the destination available.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.6
cwspInResrcFailures This object shows the number of incoming Point-to-Point(p2p) and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this interface which failed because there were not enough resources as requested in the parameters o…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.7
cwspInTimerFailures This object shows the number of signaling timers timed out for incoming Point-to-Point(p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC calls on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.8
cwspInCrankbacks This object shows the number of Crankback IEs received on this interface for incoming Point-to-Point(p2p) and Point-to-MultiPoint (p2mp) SVC/SPVC call attempts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.9
cwspOutCallAttempts This object shows the number of outgoing Signaling messages (Setup and Add Party) on this interface for Call establishment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.10
cwspOutCallEstabs This object shows the number of outgoing Signaling messages (Connect and Add Party Ack) which mark the call being established on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.11
cwspOutCallFailures This object shows the total number of outgoing Signaling messages for Point-to-Point and Point-to-MultiPoint call establishment on this interface which failed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.12
cwspOutFilterFailures This object shows the number of outgoing Signaling messages for call establishment on this interface which failed the address filtering.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.13
cwspOutRouteFailures This object shows the number of outgoing Signaling messages for call establishment on this interface which failed because the route was not available.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.14
cwspOutResrcFailures This object shows the number of outgoing Signaling messages for call establishment on this interface which failed because the resource requested was not available.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.15
cwspOutTimerFailures This object shows the number of Signaling timers timed-out on this interface for outgoing signaling messages.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.16
cwspOutCrankbacks This object shows the number of Crankback IEs being sent on this interface for outgoing signaling Release messages. This is generated on the node which generates the Crankback IEs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.5.1.1.17

This table contains signaling statistics counters

cwspSigStatsEntry row .1.3.6.1.4.1.351.140.1.2.6.1.1

An entry contains signaling statistics.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cwspSigCounterReset Writing a 2 to this object resets the all Sig counters.	Enumerationr/w Enumerated Values: 1 noop 2 reset	.1.3.6.1.4.1.351.140.1.2.6.1.1.1
cwspCallProcRcv Number of CALL PROCEEDING messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.2
cwspConnectRcv Number of CONNECT messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.3
cwspConnectAckRcv Number of CONNECT ACK messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.4
cwspSetupRcv Number of SETUP messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.5
cwspReleaseRcv Number of RELEASE messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.6
cwspReleaseComplRcv Number of RELEASE COMPLETE messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.7
cwspRestartRcv Number of RESTART messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.8
cwspRestartAckRcv Number of RESTART ACK messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.9
cwspStatusRcv Number of STATUS messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.10
cwspStatusEnqRcv Number of STATUS ENQUIRY messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.11
cwspNotifyRcv Number of NOTIFY messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.12
cwspAlertRcv Number of ALERT messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.13
cwspProgressRcv Number of PROGRESS messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.14
cwspAddPtyRcv Number of ADD PARTY messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.15
cwspAddPtyAckRcv Number of ADD PARTY ACK messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.16
cwspAddPtyRejRcv Number of ADD PARTY REJECT messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.17
cwspDropPtyRcv Number of DROP PARTY messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.18
cwspIncorrectMsgRcv Number of Incorrect messages received on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.20
cwspTimerExpiries Number of timeouts occurred on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.21
cwspLastCause to indicate the last cause of release or cranckback.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.22
cwspLastDiagnostic to indicate the last diagnostic of release or cranckback.	Integer32 Constraints: range: -2147483648-214743647	.1.3.6.1.4.1.351.140.1.2.6.1.1.23
cwspCallProcXmt Number of CALL PROCEEDING messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.24
cwspConnectXmt Number of CONNECT messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.25
cwspConnectAckXmt Number of CONNECT ACK messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.26
cwspSetupXmt Number of SETUP messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.27
cwspReleaseXmt Number of RELEASE messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.28
cwspReleaseComplXmt Number of RELEASE COMPLETE messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.29
cwspRestartXmt Number of RESTART messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.30
cwspRestartAckXmt Number of RESTART ACK messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.31
cwspStatusXmt Number of STATUS messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.32
cwspStatusEnqXmt Number of STATUS ENQUIRY messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.33
cwspNotifyXmt Number of NOTIFY messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.34
cwspAlertXmt Number of ALERT messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.35
cwspProgressXmt Number of PROGRESS messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.36
cwspAddPtyXmt Number of ADD PARTY messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.37
cwspAddPtyAckXmt Number of ADD PARTY ACK messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.38
cwspAddPtyRejXmt Number of ADD PARTY REJECT messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.39
cwspDropPtyXmt Number of DROP PARTY messages transmitted from this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.6.1.1.40
cwspSscopStatus Sscop link status on an NNI interface, object is meaningful along with ciscoWANSscopLinkChange trap.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.351.140.1.2.6.1.1.42

This table contains SSCOP (Layer 2) statistics 
counters.

cwspSscopStatsEntry row .1.3.6.1.4.1.351.140.1.2.7.1.1

An entry contains SSCOP (Layer 2) statistics.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cwspSscopCounterReset This object specifies whether the SSCOP statistics collected for this interface needs to be reset.	Enumerationr/w Enumerated Values: 1 noop 2 reset	.1.3.6.1.4.1.351.140.1.2.7.1.1.1
cwspSscopIgnoredPduRcv This object stores the number of SSCOP PDUs that are received but ignored due to incorrect size, invalid PDU, unknown PDU type.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.2
cwspSscopBgnRcv This object stores the number of SSCOP BGN PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.3
cwspSscopBgakRcv This object stores the number of SSCOP BGN ACK PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.4
cwspSscopEndRcv This object stores the number of SSCOP END PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.5
cwspSscopEndakRcv This object stores the number of SSCOP END ACK PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.6
cwspSscopRsRcv This object stores the number of SSCOP RS(Resync) PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.7
cwspSscopRsakRcv This object stores the number of SSCOP RS(Resync) ACK PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.8
cwspSscopBgrejRcv This object stores the number of SSCOP BGN REJ PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.9
cwspSscopSdRcv This object stores the number of SSCOP SD (Sequenced Data) PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.10
cwspSscopSdpRcv This object stores the number of SSCOP SDP (Sequenced Data with Poll) PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.11
cwspSscopPollRcv This object stores the number of SSCOP POLL PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.12
cwspSscopStatRcv This object stores the number of SSCOP STAT PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.13
cwspSscopUstatRcv This object stores the number of SSCOP USTAT (Unsolicited STAT) PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.14
cwspSscopUdRcv This object stores the number of SSCOP UD (Unit data) PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.15
cwspSscopMdRcv This object stores the number of SSCOP MD (Management data) PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.16
cwspSscopErakRcv This object stores the number of SSCOP ER ACK (error recovery ack) PDUs received at this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.17
cwspSscopBgnXmt This object stores the number of SSCOP BGN PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.18
cwspSscopBgakXmt This object stores the number of SSCOP BGN ACK PDUs transmitted on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.19
cwspSscopEndXmt This object stores the number of SSCOP END PDUs transmitted on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.20
cwspSscopEndakXmt This object stores the number of SSCOP END ACK PDUs transmitted on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.21
cwspSscopRsXmt This object stores the number of SSCOP RS (Resync) PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.22
cwspSscopRsakXmt This object stores the number of SSCOP RS (Resync) ACK PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.23
cwspSscopBgrejXmt This object stores the number of SSCOP BGN REJ PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.24
cwspSscopSdXmt This object stores the number of SSCOP SD transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.25
cwspSscopSdpXmt This object stores the number of SSCOP SDP PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.26
cwspSscopPollXmt This object stores the number of SSCOP POLL PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.27
cwspSscopStatXmt This object stores the number of SSCOP STAT PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.28
cwspSscopUstatXmt This object stores the number of SSCOP USTAT PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.29
cwspSscopUdXmt This object stores the number of SSCOP UD PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.30
cwspSscopMdXmt This object stores the number of SSCOP MD PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.31
cwspSscopErakXmt This object stores the number of SSCOP ER(error recovery) ACK PDUs transmitted over this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.351.140.1.2.7.1.1.32

This Table contains the objects which show parameters 
associated with a Point-to-Point(p2p) or Point-to-MultiPoint 
(p2mp) SVC/SPVC call.

cwspCallEntry row .1.3.6.1.4.1.351.140.1.2.8.1.1

This object shows the multiple key index to get the Call
record information. The key comprise of Interface Index,
VPI/VCI value and Call Reference Value for the call.

Indexes

IF-MIBifIndex cwspCallVpi cwspCallVci cwspCallLeafReference

Column	Syntax	OID
cwspCallVpi This object shows the VPI value of the call on this interface.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.351.140.1.2.8.1.1.1
cwspCallVci This object shows The VCI value of the call on this interface. The value should be in the range of 32-65535 (0=SPVP).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.8.1.1.2
cwspCallLeafReference This object shows the value of the Leaf Reference (EndPointReference) of the Call on this interface.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.8.1.1.3
cwspCallCallRef This object shows the Call Reference value of the call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.4
cwspCallCallingAddress This object shows the Calling Party Address of the call.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.8.1.1.5
cwspCallCalledAddress This object shows the Called Party Address of the call.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.8.1.1.6
cwspCallCallingSubAddr This object shows the Calling Party Subaddress of the call.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.8.1.1.7
cwspCallCalledSubAddr This object shows the Called Party Subaddress of the call.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.8.1.1.8
cwspCallOtherIntfIndex This object shows the Other Interface of the call. Generally, this would be the outgoing/egress interface for the call.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.9
cwspCallOtherIntfVpi This object shows the VPI of the call on the partner interface.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.351.140.1.2.8.1.1.10
cwspCallOtherIntfVci This object shows The VCI of the call on the partner o interface. The value should be in the range of 32-65535 (0=SPVP).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.8.1.1.11
cwspCallOtherIntfCallRef This object shows the Call Reference of the call on the partner interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.12
cwspCallType This object shows the Call Type for the call on this interface. The call type could be SVC or SPVC.	Enumeration Enumerated Values: 1 svc 2 spvc	.1.3.6.1.4.1.351.140.1.2.8.1.1.13
cwspCallStartTime This object shows the start time of the call. This is the timestamp when the Setup Message (or Add Party Message) was first received on this interface.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.351.140.1.2.8.1.1.14
cwspCallBearerClass This object shows the Bearer Class of the Call. It could be BcobA, BcobC, BcobX or VP Service	Enumeration Enumerated Values: 1 bcobA 2 bcobC 3 bcobX 4 vp	.1.3.6.1.4.1.351.140.1.2.8.1.1.15
cwspCallServiceCategory This object shows the service category of the call, which can be CBR, rtVBR, nrtVBR, ABR or UBR	Enumeration Enumerated Values: 1 cbr 2 rtVbr 3 nrtVbr 4 abr 5 ubr	.1.3.6.1.4.1.351.140.1.2.8.1.1.16
cwspCallCastType This object shows the Cast Type of the call, which can be a Point-to-Point (p2p), Point-to-MultiPoint (p2mp) or MultiPoint-to-Point (mp2p) call.	Enumeration Enumerated Values: 1 p2p 2 p2mp 3 mp2p	.1.3.6.1.4.1.351.140.1.2.8.1.1.17
cwspCallClipSusceptibility This object shows Susceptibility to Clipping. It can be susceptible or not susceptible.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.351.140.1.2.8.1.1.18
cwspCallFwdConformance This object shows the conformance of the call to the traffic sets in the forward direction. It can be CBR.1, CBR.2, CBR.3, VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in ATMF Traffic Management 4.0 speci…	Enumeration Enumerated Values: 1 cbr1 2 cbr2 3 cbr3 4 vbr1 5 vbr2 6 vbr3 7 abr 8 ubr1 9 ubr2	.1.3.6.1.4.1.351.140.1.2.8.1.1.19
cwspCallFwdPcr This object shows the Peak Cell Rate(pcr) in the forward direction of the call.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.20
cwspCallFwdScr This object shows the Sustainable Cell Rate(scr) in the forward direction of the call.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.21
cwspCallFwdMbs This object shows the Maximum Burst Size(mbs) of the call in the forward direction.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.22
cwspCallFwdCdvt This object shows the Cell Delay Variation Tolerance(cdvt) in the forward direction for the call, for PCR and SCR.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.23
cwspCallFwdFrameDiscard This object shows if the Frame Discard is enabled or disabled in the forward direction for the call	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.351.140.1.2.8.1.1.24
cwspCallBwdConformance This object shows the conformance of the call to the traffic sets in the backward direction. It can be CBR.1, CBR.2, CBR.3, VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in ATMF Traffic Management 4.0 spec…	Enumeration Enumerated Values: 1 cbr1 2 cbr2 3 cbr3 4 vbr1 5 vbr2 6 vbr3 7 abr 8 ubr1 9 ubr2	.1.3.6.1.4.1.351.140.1.2.8.1.1.25
cwspCallBwdPcr This object shows the Peak Cell Rate in the backward direction of the call.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.26
cwspCallBwdScr This object shows the Sustainable Cell Rate in the backward direction of the call.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.27
cwspCallBwdMbs This object shows the Maximum Burst Size of the call in the backward direction.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.28
cwspCallBwdCdvt This object shows the Cell Delay Variation Tolerance in the backward direction for the call, for PCR and SCR.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.29
cwspCallBwdFrameDiscard This object shows if the Frame Discard is enabled or disabled in the backward direction for the call.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.351.140.1.2.8.1.1.30
cwspCallMaxCtd This object shows the Maximum Cell Transfer Delay for the call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.31
cwspCallMaxFwdCdv This object shows the Maximum Cell Delay Variation in the forward direction for this call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.32
cwspCallMaxFwdClr This object shows the Maximum Cell Loss Ratio in the forward direction for this call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.33
cwspCallMaxBwdCdv This object shows the Maximum Cell Delay Variation in the backward direction for this call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.34
cwspCallMaxBwdClr This object shows the Maximum Cell Loss Ratio in the backward direction for this call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.8.1.1.35

This table contains information for ABR calls on an 
interface.

cwspAbrCallEntry row .1.3.6.1.4.1.351.140.1.2.9.1.1

An entry in the table, containing information about an ABR
call.

Indexes

IF-MIBifIndex cwspAbrCallVpi cwspAbrCallVci

Column	Syntax	OID
cwspAbrCallVpi The VPI value of the ABR call on this interface.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.351.140.1.2.9.1.1.1
cwspAbrCallVci The VCI value of the ABR call on this interface. The value should be in the range of 32-65535 (0=SPVP).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.9.1.1.2
cwspAbrCallCallRef The Call Reference value of the ABR call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.3
cwspAbrCallClgAddress The Calling Party Address of the ABR call.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.9.1.1.4
cwspAbrCallCldAddress The Called Party Address of the ABR call.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.9.1.1.5
cwspAbrCallClgSubAddr The Calling Party Subaddress of the ABR call.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.9.1.1.6
cwspAbrCallCldSubAddr The Called Party Subaddress of the ABR call.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.9.1.1.7
cwspAbrCallOtherIntfIndex The Other Interface ID of the ABR call. Generally this would be the outgoing/egress interface for the call.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.8
cwspAbrCallOtherIntfVpi The VPI value of the ABR call on the partner interface.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.351.140.1.2.9.1.1.9
cwspAbrCallOtherIntfVci The VCI value of the ABR call on the partner interface. The value should be in the range of 32-65535 (0=SPVP).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.351.140.1.2.9.1.1.10
cwspAbrCallOtherIntfCallRef The Call Reference of the ABR call on the partner interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.11
cwspAbrCallType The Call Type for the ABR call on this interface. The call type could be SVC or SPVC.	Enumeration Enumerated Values: 1 svc 2 spvc	.1.3.6.1.4.1.351.140.1.2.9.1.1.12
cwspAbrCallStartTime The start time of the ABR call. This is the timestamp when the Setup Message (or Add Party Message) was first received on this interface.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.351.140.1.2.9.1.1.13
cwspAbrCallBearerClass The Bearer Class of the ABR call. It could be BCOB-A, BCOB-C, BCOB-X or VP Service.	Enumeration Enumerated Values: 1 bcobA 2 bcobC 3 bcobX 4 vp	.1.3.6.1.4.1.351.140.1.2.9.1.1.14
cwspAbrCallServiceCategory The Service Category of the ABR call, which is ABR.	Enumeration Enumerated Values: 4 abr	.1.3.6.1.4.1.351.140.1.2.9.1.1.15
cwspAbrCallCastType The Cast Type of the ABR call, which can only be Point-to-Point(p2p) call.	Enumeration Enumerated Values: 1 p2p	.1.3.6.1.4.1.351.140.1.2.9.1.1.16
cwspAbrCallClipSusceptibility Susceptibility to Clipping. It can be susceptible or not susceptible.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.351.140.1.2.9.1.1.17
cwspAbrCallFwdConformance The Conformance of the ABR call to the traffic sets in the forward direction. It can only be ABR as defined in ATMF Traffic Management 4.0 specification.	Enumeration Enumerated Values: 7 abr	.1.3.6.1.4.1.351.140.1.2.9.1.1.18
cwspAbrCallFwdPcr The Peak Cell Rate for the ABR call in the forward direction.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.19
cwspAbrCallFwdMcr The Minimum Cell Rate for the ABR call in the forward direction.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.20
cwspAbrCallFwdIcr The Initial Cell Rate for the ABR call in the forward direction. This is the rate at which the source starts, both initially and after an idle period. The value must not be larger than PCR, and is usually lower.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.21
cwspAbrCallFwdRif The Rate Increase Factor for the ABR call in the forward direction. This controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase.…	Enumeration Enumerated Values: 1 rifOneOver32768 2 rifOneOver16384 3 rifOneOver8192 4 rifOneOver4096 5 rifOneOver2048 6 rifOneOver1024 7 rifOneOver512 8 rifOneOver256 9 rifOneOver128 10 rifOneOver64 11 rifOneOver32 12 rifOneOver16 13 rifOneOver8 14 rifOneOver4 15 rifOneOver2 16 rifOne	.1.3.6.1.4.1.351.140.1.2.9.1.1.22
cwspAbrCallFwdRdf The Rate Decrease Factor for the ABR call in the forward direction. This controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default v…	Enumeration Enumerated Values: 1 rdfOneOver32768 2 rdfOneOver16384 3 rdfOneOver8192 4 rdfOneOver4096 5 rdfOneOver2048 6 rdfOneOver1024 7 rdfOneOver512 8 rdfOneOver256 9 rdfOneOver128 10 rdfOneOver64 11 rdfOneOver32 12 rdfOneOver16 13 rdfOneOver8 14 rdfOneOver4 15 rdfOneOver2 16 rdfOne	.1.3.6.1.4.1.351.140.1.2.9.1.1.23
cwspAbrCallFwdTbe The Transient Buffer Exposure for the ABR call in the forward direction. This is the negotiated number of cells that the network would like to limit the source to sending during setup periods, before the first RM-cell r…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.24
cwspAbrCallFwdNrm The Maximum Number of Cells a source may send for each forward RM-cell in the forward direction for the ABR call. The default value is nrm32(5).	Enumeration Enumerated Values: 1 nrm2 2 nrm4 3 nrm8 4 nrm16 5 nrm32 6 nrm64 7 nrm128 8 nrm256	.1.3.6.1.4.1.351.140.1.2.9.1.1.25
cwspAbrCallFwdTrm The Upper Bound on the time between forward RM-cells in the forward direction for the ABR call.	Enumeration Enumerated Values: 1 trm0point78125 2 trm1point5625 3 trm3point125 4 trm6point25 5 trm12point5 6 trm25 7 trm50 8 trm100	.1.3.6.1.4.1.351.140.1.2.9.1.1.26
cwspAbrCallFwdAdtf The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR call in the forward direction. This is the time permitted between sending RM-cells before the rate is decreased to ICR. Range is 10 ms to 10.23 seconds. The…	Integer32 Constraints: range: 1-1023	.1.3.6.1.4.1.351.140.1.2.9.1.1.27
cwspAbrCallFwdCdf The Cutoff Decrease Factor for the ABR call in the forward direction. This controls the decrease in Allowed Cell Rate (ACR) associated with missing RM-cell count (CRM). Larger values result in faster rate decrease. T…	Enumeration Enumerated Values: 1 cdf0 2 cdfOneOver64 3 cdfOneOver32 4 cdfOneOver16 5 cdfOneOver8 6 cdfOneOver4 7 cdfOneOver2 8 cdfOne	.1.3.6.1.4.1.351.140.1.2.9.1.1.28
cwspAbrCallFwdFrameDiscard Whether Frame Discard is enabled or disabled in the forward direction for the ABR call.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.351.140.1.2.9.1.1.29
cwspAbrCallBwdPcr The Peak Cell Rate for the ABR call in the backward direction.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.30
cwspAbrCallBwdMcr The Minimum Cell Rate for the ABR call in the backward direction.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.31
cwspAbrCallBwdIcr The Initial Cell Rate for the ABR call in the backward direction. This is the rate at which the source starts, both initially and after an idle period. The value must not be larger than PCR, and is usually lower.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.32
cwspAbrCallBwdRif The Rate Increase Factor for the ABR call in the backward direction. This controls the rate at which the rate increases, when a forward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase.…	Enumeration Enumerated Values: 1 rifOneOver32768 2 rifOneOver16384 3 rifOneOver8192 4 rifOneOver4096 5 rifOneOver2048 6 rifOneOver1024 7 rifOneOver512 8 rifOneOver256 9 rifOneOver128 10 rifOneOver64 11 rifOneOver32 12 rifOneOver16 13 rifOneOver8 14 rifOneOver4 15 rifOneOver2 16 rifOne	.1.3.6.1.4.1.351.140.1.2.9.1.1.33
cwspAbrCallBwdRdf The Rate Decrease Factor for the ABR call in the backward direction. This controls the rate decrease which occurs when forward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default v…	Enumeration Enumerated Values: 1 rdfOneOver32768 2 rdfOneOver16384 3 rdfOneOver8192 4 rdfOneOver4096 5 rdfOneOver2048 6 rdfOneOver1024 7 rdfOneOver512 8 rdfOneOver256 9 rdfOneOver128 10 rdfOneOver64 11 rdfOneOver32 12 rdfOneOver16 13 rdfOneOver8 14 rdfOneOver4 15 rdfOneOver2 16 rdfOne	.1.3.6.1.4.1.351.140.1.2.9.1.1.34
cwspAbrCallBwdTbe The Transient Buffer Exposure for the ABR call in the backward direction. This is the negotiated number of cells that the network would like to limit the source to sending during setup periods, before the first RM-cell …	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.35
cwspAbrCallBwdNrm The Maximum Number of Cells a source may send for each forward RM-cell in the backward direction for the ABR call. The default value is nrm32(5).	Enumeration Enumerated Values: 1 nrm2 2 nrm4 3 nrm8 4 nrm16 5 nrm32 6 nrm64 7 nrm128 8 nrm256	.1.3.6.1.4.1.351.140.1.2.9.1.1.36
cwspAbrCallBwdTrm The Upper Bound on the time between forward RM-cells in the backward direction for the ABR call.	Enumeration Enumerated Values: 1 trm0point78125 2 trm1point5625 3 trm3point125 4 trm6point25 5 trm12point5 6 trm25 7 trm50 8 trm100	.1.3.6.1.4.1.351.140.1.2.9.1.1.37
cwspAbrCallBwdAdtf The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR call in the backward direction. This is the time permitted between sending RM-cells before the rate is decreased to ICR. Range is 10 ms to 10.23 seconds. Th…	Integer32 Constraints: range: 1-1023	.1.3.6.1.4.1.351.140.1.2.9.1.1.38
cwspAbrCallBwdCdf The Cutoff Decrease Factor for the ABR call in the backward direction. This controls the decrease in Allowed Cell Rate (ACR) associated with missing RM-cell count (CRM). Larger values result in faster rate decrease. …	Enumeration Enumerated Values: 1 cdf0 2 cdfOneOver64 3 cdfOneOver32 4 cdfOneOver16 5 cdfOneOver8 6 cdfOneOver4 7 cdfOneOver2 8 cdfOne	.1.3.6.1.4.1.351.140.1.2.9.1.1.39
cwspAbrCallBwdFrameDiscard Whether Frame Discard is enabled or disabled in the backward direction for the ABR call.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.351.140.1.2.9.1.1.40
cwspAbrCallFrtt The Fixed Round-Trip Time for the ABR call. This is the sum of the fixed and propagation delays from the source to the furthest destination and back.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.41
cwspAbrCallMaxCtd The Maximum Cell Transfer Delay for the ABR call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.42
cwspAbrCallMaxFwdCdv The Maximum Cell Delay Variation in the forward direction for the ABR call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.43
cwspAbrCallMaxFwdClr The Maximum Cell Loss Ratio in the forward direction for the ABR call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.44
cwspAbrCallMaxBwdCdv The Maximum Cell Delay Variation in the backward direction for the ABR call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.45
cwspAbrCallMaxBwdClr The Maximum Cell Loss Ratio in the backward direction for the ABR call on this interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.9.1.1.46

A table specifying the network prefix(es)
used for ILMI address registration.

cwspPrefixEntry row .1.3.6.1.4.1.351.140.1.2.10.1.1

Information about a single network prefix contained
in the prefix table.

Indexes

IF-MIBifIndex cwspNetPrefix

Column	Syntax	OID
cwspNetPrefix The network prefix specified for use in ILMI address registration.	ATM-FORUM-TC-MIBNetPrefix Type Constraints: range: 8 range: 13	.1.3.6.1.4.1.351.140.1.2.10.1.1.1
cwspPrefixRowStatus Used to create, delete, activate and de-activate network prefixes used in ILMI address registration.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.351.140.1.2.10.1.1.2

The Interface ATM Address Table. This table contains all the
attributes necessary to determine what the PNNI entity believes
is reachable in terms of ATM End System Addresses and to
determine which nodes are advertising this reachability. This
table is also used to configure static routes to reachable
addresses.  Entries in this table can be created/deleted by
setting the intfAddressRowStatus object to appropriate values.
Existing entries in this table cannot be modified. Entries in 
this table can also be created/deleted through the command 
provided by the CLI.

cwspAddressEntry row .1.3.6.1.4.1.351.140.1.2.11.1.1

An entry in the table, containing information about a
reachable address.

Indexes

IF-MIBifIndex cwspAtmAddress cwspAddrLen

Column	Syntax	OID
cwspAtmAddress The value of the ATM End System Address.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.11.1.1.1
cwspAddrLen The address length in bits to be applied to the ATM End System Address.	Integer32 Constraints: range: 0-160	.1.3.6.1.4.1.351.140.1.2.11.1.1.2
cwspAddrType The type of reachability from the advertising node to the address. This variable indicates either this ATM address ('internal') is a reachable ATM destination that is directly attached to the logical node advertising th…	Enumerationr/w Enumerated Values: 1 internal 2 exterior	.1.3.6.1.4.1.351.140.1.2.11.1.1.3
cwspAddrProto The routing mechanism via which the connectivity from the advertising node to the reachable address was learned. A 'local' address indicates this address is automatically advertised. A 'static' address is not automatic…	Enumerationr/w Enumerated Values: 1 local 2 static	.1.3.6.1.4.1.351.140.1.2.11.1.1.4
cwspAddrPlan The address plan. For NSAP address, the first byte of the address automatically implies one of the three NSAP address plans: NSAP E.164, NSAP DCC or NSAP ICD.	Enumerationr/w Enumerated Values: 1 e164 2 nsap	.1.3.6.1.4.1.351.140.1.2.11.1.1.5
cwspAddrScope The PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the address.	Integer32r/w Constraints: range: 0-104	.1.3.6.1.4.1.351.140.1.2.11.1.1.6
cwspAddrRedistribute Whether or not the reachable address specified by this entry is to be advertised by the local node into its PNNI routing domain. This object is only meaningful if the routing mechanism (cwspAddrProto) is static.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.140.1.2.11.1.1.7
cwspAddressRowStatus To create or delete a reachable address. Note that NMS should use CreateAndGo to create a row and Destroy to delete a row. The managed device will return active or notInService as row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.351.140.1.2.11.1.1.8

This table contains a list of ATM addresses that can
be used for calls to and from a given interface by a
switch or service.  The ATM addresses are registered by
the endsystem via ILMI.  ILMI registered addresses
cannot be deleted using this table. This table only
applies to switches and network services.

cwspRegAddressEntry row .1.3.6.1.4.1.351.140.1.2.12.1.1

An entry in the ATM Interface Registered Address
table.

Indexes

IF-MIBifIndex cwspRegAtmAddress

Column	Syntax	OID
cwspRegAtmAddress An address registered for a given switch or service interface.	ATM-FORUM-TC-MIBAtmAddress Type Constraints: range: 8 range: 20	.1.3.6.1.4.1.351.140.1.2.12.1.1.1
cwspRegAddressOrgSscope This object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indicated scope. The default values for organizat…	Enumerationr/w Enumerated Values: 1 localNetwork 15 global	.1.3.6.1.4.1.351.140.1.2.12.1.1.2

A table specifying the load information for each
interface.

cwspLoadEntry row .1.3.6.1.4.1.351.140.1.2.13.1.1

An entry contains the load information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cwspLoadBwTotal The total bandwidth of the interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.1
cwspLoadMaxBwCbr The Maximum bandwith for CBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.2
cwspLoadMaxBwRtVbr The maximum bandwith for real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.3
cwspLoadMaxBwNrtVbr The maximum bandwith for non-real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.4
cwspLoadMaxBwAbr The maximum bandwith for ABR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.5
cwspLoadMaxBwUbr The maximum bandwith for UBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.6
cwspLoadBwAvail The total available bandwidth of the interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.7
cwspLoadAvlBwCbr The available bandwith for CBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.8
cwspLoadAvlBwRtVbr The available bandwith for real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.9
cwspLoadAvlBwNrtVbr The available bandwith for non-real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.10
cwspLoadAvlBwAbr The available bandwith for ABR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.11
cwspLoadAvlBwUbr The available bandwith for UBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.12
cwspLoadVcAvail The total number of available VCs of the interface.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.13
cwspLoadAvlVcCbr The number of VCs used by CBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.14
cwspLoadAvlVcRtVbr The number of VCs used by real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.15
cwspLoadAvlVcNrtVbr The number of VCs used by non-real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.16
cwspLoadAvlVcAbr The number of VCs used by ABR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.17
cwspLoadAvlVcUbr The number of VCs used by UBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.18
cwspLoadCtdCbr The cell transfer delay of CBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.19
cwspLoadCtdRtVbr The cell transfer delay of real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.20
cwspLoadCtdNrtVbr The cell transfer delay of non-real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.21
cwspLoadCtdAbr The cell transfer delay of ABR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.22
cwspLoadCtdUbr The cell transfer delay of UBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.23
cwspLoadCdvCbr The cell delay variation of CBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.24
cwspLoadCdvRtVbr The cell delay variation of real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.25
cwspLoadCdvNrtVbr The cell delay variation of non-real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.26
cwspLoadCdvAbr The cell delay variation of ABR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.27
cwspLoadCdvUbr The cell delay variation of UBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.28
cwspLoadClr0Cbr The cell loss ratio-0 of CBR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.29
cwspLoadClr0RtVbr The cell loss ratio-0 of real time VBR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.30
cwspLoadClr0NrtVbr The cell loss ratio-0 of non-real time VBR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.31
cwspLoadClr0Abr The cell loss ratio-0 of ABR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.32
cwspLoadClr0Ubr The cell loss ratio-0 of UBR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.33
cwspLoadClr01Cbr The cell loss ratio-1 of CBR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.34
cwspLoadClr01RtVbr The cell loss ratio-1 of real time VBR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.35
cwspLoadClr01NrtVbr The cell loss ratio-1 of non-real time VBR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.36
cwspLoadClr01Abr The cell loss ratio-1 of ABR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.37
cwspLoadClr01Ubr The cell loss ratio-1 of UBR service, -1 implies N/A.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.38
cwspLoadMinGurCrCbr The minimum guaranteed cell rate capacity of CBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.39
cwspLoadMinGurCrRtVbr The minimum guaranteed cell rate capacity of real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.40
cwspLoadMinGurCrNrtVbr The minimum guaranteed cell rate capacity of non-real time VBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.41
cwspLoadMinGurCrAbr The minimum guaranteed cell rate capacity of ABR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.42
cwspLoadMinGurCrUbr The minimum guaranteed cell rate capacity of UBR service.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.351.140.1.2.13.1.1.43