cwspOperMaxVCCs
CISCO-WAN-SVC-MIB ·
.1.3.6.1.4.1.351.140.1.2.15.1.1.5
Object
column
Integer32
The maximum number of switched and permanent VCCs supported on this ATM interface
Context
- MIB
- CISCO-WAN-SVC-MIB
- OID
.1.3.6.1.4.1.351.140.1.2.15.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cwspOperationEntry
- Table
- cwspOperationTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65536
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwspOperIlmiEnable The operational state of ILMI. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.15.1.1.1 |
| cwspOperDeviceType This object determines the type of the ATM device. This
object is used in automatic ATM Interface-Type determination
procedure such that a correct operational ATM
Interface-type c… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.15.1.1.10 |
| cwspOperIlmiVersion An indication of the latest version of the ATM Forum
ILMI Specification that is supported on this ATM Interface.
If the peer IME's value of this object is the same … | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.15.1.1.11 |
| cwspOperNniSigVersion An indication of the latest version of the ATM Forum
PNNI Signaling Specification that is supported on this
ATM Interface. Note that the PNNI routing version is not
determined thr… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.15.1.1.12 |
| cwspOperMaxSvpcVpi The maximum switched VPC VPI. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.13 |
| cwspOperMinSvpcVpi The minimum switched VPC VPI. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.14 |
| cwspOperMaxSvccVpi The maximum switched VCC VPI. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.15 |
| cwspOperMinSvccVpi The minimum switched VCC VPI. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.16 |
| cwspOperMaxSvccVci The maximum switched VCC VCI. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.17 |
| cwspOperMinSvccVci The minimum switched VCC VCI. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.18 |
| cwspOperAddrPlanSupported The ATM address plan supported on a public UNI. For all other
interfaces, the value is aesa. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.15.1.1.19 |
| cwspOperIfcType The interface type of an interface
publicUni -- Public User-Network Interface
privateUni -- Private User-Network Interface
iisp -- Interim Inter-Switch Signaling Protocol
pnni -- … | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.15.1.1.2 |
| cwspOperIfcSide The IME type of the ATM device which is concluded from
automatic interface type determination procedure. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.15.1.1.3 |
| cwspOperMaxVPCs The maximum number of switched and permanent VPCs supported
on this ATM interface | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.4 |
| cwspOperMaxVpiBits The maximum number of active VPI bits on this ATM interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.6 |
| cwspOperMaxVciBits The maximum number of active VCI bits on this ATM interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.15.1.1.7 |
| cwspOperUniType The type of the ATM device, either public or private. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.15.1.1.8 |
| cwspOperUniVersion An indication of the latest version of the ATM Forum UNI
Signaling Specification that is supported on this ATM
Interface. If this value is not present, a version of the
UNI earli… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.15.1.1.9 |