cwspMinSvpcVpi
CISCO-WAN-SVC-MIB ·
.1.3.6.1.4.1.351.140.1.2.1.1.1.26
Object
column
r/w
Integer32
Indicates the minimum SVPC VPI configured on the interface.
Context
- MIB
- CISCO-WAN-SVC-MIB
- OID
.1.3.6.1.4.1.351.140.1.2.1.1.1.26- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cwspConfigEntry
- Table
- cwspConfigTable
- Siblings
- 35
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-4095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwspAdminStatus The administrative status of the interface.
inService (1) means that the interface is
operational while outService (2) indicates
that the interface is put out of service by
the… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.1.1.1.1 |
| cwspSignallingVci Indicates the signaling VCI used on the
interface, acceptable value is 32-65535,
and 5 being the default. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.10 |
| cwspRoutingVpi Indicates the VPI used for PNNI lowest level RCC. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.11 |
| cwspRoutingVci Indicates the VCI used for the PNNI lowest
level RCC, acceptable value is 32-65535, and
18 being the default. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.12 |
| cwspMaxVpiBits The maximum number of active VPI bits on this
ATM Interface. For virtual interfaces (i.e. Virtual
Path Connections used by PNNI), this value has
no meaning and is set to zero. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.13 |
| cwspMaxVciBits The maximum number of active VCI bits
on this ATM Interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.14 |
| cwspUniVersion An indication of the latest version of the ATM Forum UNI
Signaling Specification that is supported on this ATM
Interface. If this value is not present, a version of the
UNI earli… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.1.1.1.15 |
| cwspNniVersion An indication of the latest version of the ATM Forum
PNNI Signaling Specification that is supported on this
ATM Interface. Note that the PNNI routing version is not
determined thr… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.1.1.1.16 |
| cwspUniType The type of the ATM device, either public or private. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.1.1.1.17 |
| cwspSide This object determines the type of the ATM device. This
object is used in automatic ATM Interface-Type determination
procedure such that a correct operational ATM Interface-type
c… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.1.1.1.18 |
| cwspMaxP2pCalls Indicates the maximum number of point to
point calls (including VCs and VPs allowed
on the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.19 |
| cwspOperStatus The operational state of the interface. This status
is derived from the physical state of the interface.
failed (2) indicates that the interface has failed.
ok (1) indicates th… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.1.1.1.2 |
| cwspMaxP2mpRoots Indicates the maximum number of root VCs
(for point-to-multipoint) allowed on the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.20 |
| cwspMaxP2mpLeafs Indicates the maximum number of leaf VCs
(for point-to-multipoint) allowed on the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.21 |
| cwspMinSvccVpi Indicates the minimum SVCC VPI configured on
the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.22 |
| cwspMaxSvccVpi Indicates the maximum SVCC VPI configured on
the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.23 |
| cwspMinSvccVci Indicates the minimum SVCC VCI configured on
the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.24 |
| cwspMaxSvccVci Indicates the maximum SVCC VCI configured on
the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.25 |
| cwspMaxSvpcVpi Indicates the maximum SVPC VPI configured on
the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.27 |
| cwspEnhancedIisp Indicates whether the enhanced features for IISP
are enabled or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.28 |
| cwspConfigTableRowStatus Used to create and delete the Interface. However, only
createAndGo, destroy, active and notInService are supported.
NMS should only use createAndGo to create a row and destroy to
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.351.140.1.2.1.1.1.29 |
| cwspSvcBlocked Indicates whether Switches virtual connections are
allowed through this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.3 |
| cwspAddrPlanSupported The ATM address plan supported on an interface. This can
only be modified if interface is public UNI. For all other
interfaces, the value is aesa. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.1.1.1.30 |
| cwspIlmiSecureLink Indicates whether ILMI Secure Link Protocol is enabled or
disabled. When secure link protocol is enabled, loss in ILMI
connectivity is treated as loss of attachment point which
r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.31 |
| cwspIlmiAttachmentPoint Indicates whether detection of loss of attachment
procedures are enabled on this interface. When set
to true, then standard ILMI procedures are employed
to detect loss of attac… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.32 |
| cwspIlmiLocalAttrStd Indicates whether on modification of local attributes,
procedures as recommended by ILMI 4.0 specification
are followed or cisco proprietery procedures are
followed. When set t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.33 |
| cwspIlmiUCSMEnable Indicates whether ILMI user connection status monitoring
is enabled or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.34 |
| cwspRoutingPriority This object is the routing priority to be assigned
to connections which enter the network from this
ingress interface, but does not carry the routing
priority signaling in the S… | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.35 |
| cwspSpvcAddress This object identifies the internal NSAP assigned
to a port by the switch.
a) The format is that of 13-byte node prefix and
7-byte port number.
b) When the switch's… | column | CISCO-WAN-ATM-CONN-MIBCiscoWanNsapAtmAddress | .1.3.6.1.4.1.351.140.1.2.1.1.1.36 |
| cwspSpvcBlocked Indicates whether soft permanent virtual
connections are allowed through this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.4 |
| cwspIlmiAddrRegEnable Indicates whether ILMI address registration is
enabled or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.5 |
| cwspIlmiAutoConfEnable Indicates whether auto-configuration of the
interface is turned on or off. If
auto-configuration is enabled, then the interface
comes up using the ILMI auto-configuration. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.6 |
| cwspIlmiServRegEnable Indicates whether service registry is
enabled or disabled on the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.140.1.2.1.1.1.7 |
| cwspPhyIdentifier Indicates the physical identification of the interface.
Mandatory when the port is provisioned for the
first time through SNMP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.351.140.1.2.1.1.1.8 |
| cwspSignallingVpi Denotes the Signaling VPI used on the interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.1.1.1.9 |