cwspCallBwdConformance
CISCO-WAN-SVC-MIB ·
.1.3.6.1.4.1.351.140.1.2.8.1.1.25
Object
column
Enumeration
This object shows the conformance of the call to the traffic sets in the backward direction. It can be CBR.1, CBR.2, CBR.3, VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in ATMF Traffic Management 4.0 specification.
Context
- MIB
- CISCO-WAN-SVC-MIB
- OID
.1.3.6.1.4.1.351.140.1.2.8.1.1.25- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cwspCallEntry
- Table
- cwspCallTable
- Siblings
- 34
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | cbr1 |
2 | cbr2 |
3 | cbr3 |
4 | vbr1 |
5 | vbr2 |
6 | vbr3 |
7 | abr |
8 | ubr1 |
9 | ubr2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwspCallVpi This object shows the VPI value of the call on this
interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.1 |
| cwspCallOtherIntfVpi This object shows the VPI of the call on the partner
interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.10 |
| cwspCallOtherIntfVci This object shows The VCI of the call on the partner o
interface.
The value should be in the range of 32-65535 (0=SPVP). | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.11 |
| cwspCallOtherIntfCallRef This object shows the Call Reference of the call on the
partner interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.12 |
| cwspCallType This object shows the Call Type for the call on this
interface.
The call type could be SVC or SPVC. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.8.1.1.13 |
| cwspCallStartTime This object shows the start time of the call. This is the
timestamp when the Setup Message (or Add Party Message) was
first received on this interface. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.351.140.1.2.8.1.1.14 |
| cwspCallBearerClass This object shows the Bearer Class of the Call. It could be
BcobA, BcobC, BcobX or VP Service | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.8.1.1.15 |
| cwspCallServiceCategory This object shows the service category of the call, which can
be CBR, rtVBR, nrtVBR, ABR or UBR | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.8.1.1.16 |
| cwspCallCastType This object shows the Cast Type of the call, which can be a
Point-to-Point (p2p), Point-to-MultiPoint (p2mp) or
MultiPoint-to-Point (mp2p) call. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.8.1.1.17 |
| cwspCallClipSusceptibility This object shows Susceptibility to Clipping. It can be
susceptible or not susceptible. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.8.1.1.18 |
| cwspCallFwdConformance This object shows the conformance of the call to the traffic
sets in the forward direction. It can be CBR.1, CBR.2, CBR.3,
VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defi… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.8.1.1.19 |
| cwspCallVci This object shows The VCI value of the call on this interface.
The value should be in the range of 32-65535 (0=SPVP). | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.2 |
| cwspCallFwdPcr This object shows the Peak Cell Rate(pcr) in the forward
direction of the call. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.20 |
| cwspCallFwdScr This object shows the Sustainable Cell Rate(scr) in the
forward direction of the call. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.21 |
| cwspCallFwdMbs This object shows the Maximum Burst Size(mbs) of the call
in the forward direction. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.22 |
| cwspCallFwdCdvt This object shows the Cell Delay Variation Tolerance(cdvt)
in the forward direction for the call, for PCR and SCR. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.23 |
| cwspCallFwdFrameDiscard This object shows if the Frame Discard is enabled or disabled
in the forward direction for the call | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.8.1.1.24 |
| cwspCallBwdPcr This object shows the Peak Cell Rate in the backward direction
of the call. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.26 |
| cwspCallBwdScr This object shows the Sustainable Cell Rate in the backward
direction of the call. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.27 |
| cwspCallBwdMbs This object shows the Maximum Burst Size of the call in the
backward direction. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.28 |
| cwspCallBwdCdvt This object shows the Cell Delay Variation Tolerance in the
backward direction for the call, for PCR and SCR. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.29 |
| cwspCallLeafReference This object shows the value of the Leaf Reference
(EndPointReference) of the Call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.3 |
| cwspCallBwdFrameDiscard This object shows if the Frame Discard is enabled or disabled
in the backward direction for the call. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.8.1.1.30 |
| cwspCallMaxCtd This object shows the Maximum Cell Transfer Delay for the call
on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.31 |
| cwspCallMaxFwdCdv This object shows the Maximum Cell Delay Variation in the
forward direction for this call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.32 |
| cwspCallMaxFwdClr This object shows the Maximum Cell Loss Ratio in the forward
direction for this call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.33 |
| cwspCallMaxBwdCdv This object shows the Maximum Cell Delay Variation in the
backward direction for this call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.34 |
| cwspCallMaxBwdClr This object shows the Maximum Cell Loss Ratio in the backward
direction for this call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.35 |
| cwspCallCallRef This object shows the Call Reference value of the call on
this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.4 |
| cwspCallCallingAddress This object shows the Calling Party Address of the call. | column | ATM-FORUM-TC-MIBAtmAddress | .1.3.6.1.4.1.351.140.1.2.8.1.1.5 |
| cwspCallCalledAddress This object shows the Called Party Address of the call. | column | ATM-FORUM-TC-MIBAtmAddress | .1.3.6.1.4.1.351.140.1.2.8.1.1.6 |
| cwspCallCallingSubAddr This object shows the Calling Party Subaddress of the
call. | column | ATM-FORUM-TC-MIBAtmAddress | .1.3.6.1.4.1.351.140.1.2.8.1.1.7 |
| cwspCallCalledSubAddr This object shows the Called Party Subaddress of the
call. | column | ATM-FORUM-TC-MIBAtmAddress | .1.3.6.1.4.1.351.140.1.2.8.1.1.8 |
| cwspCallOtherIntfIndex This object shows the Other Interface of the call. Generally,
this would be the outgoing/egress interface for the call. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.8.1.1.9 |