cwspAbrCallFwdTbe
CISCO-WAN-SVC-MIB ·
.1.3.6.1.4.1.351.140.1.2.9.1.1.24
Object
column
Integer32
The Transient Buffer Exposure for the ABR call in the forward direction. This is the negotiated number of cells that the network would like to limit the source to sending during setup periods, before the first RM-cell returns.
Context
- MIB
- CISCO-WAN-SVC-MIB
- OID
.1.3.6.1.4.1.351.140.1.2.9.1.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cwspAbrCallEntry
- Table
- cwspAbrCallTable
- Siblings
- 45
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwspAbrCallVpi The VPI value of the ABR call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.1 |
| cwspAbrCallOtherIntfVci The VCI value of the ABR call on the partner interface.
The value should be in the range of 32-65535 (0=SPVP). | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.10 |
| cwspAbrCallOtherIntfCallRef The Call Reference of the ABR call on the partner interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.11 |
| cwspAbrCallType The Call Type for the ABR call on this interface. The call
type could be SVC or SPVC. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.12 |
| cwspAbrCallStartTime The start time of the ABR call. This is the timestamp when
the Setup Message (or Add Party Message) was first received
on this interface. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.351.140.1.2.9.1.1.13 |
| cwspAbrCallBearerClass The Bearer Class of the ABR call. It could be BCOB-A,
BCOB-C, BCOB-X or VP Service. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.14 |
| cwspAbrCallServiceCategory The Service Category of the ABR call, which is ABR. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.15 |
| cwspAbrCallCastType The Cast Type of the ABR call, which can only be
Point-to-Point(p2p) call. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.16 |
| cwspAbrCallClipSusceptibility Susceptibility to Clipping. It can be susceptible or
not susceptible. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.17 |
| cwspAbrCallFwdConformance The Conformance of the ABR call to the traffic sets in the
forward direction. It can only be ABR as defined in ATMF
Traffic Management 4.0 specification. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.18 |
| cwspAbrCallFwdPcr The Peak Cell Rate for the ABR call in the forward direction. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.19 |
| cwspAbrCallVci The VCI value of the ABR call on this interface.
The value should be in the range of 32-65535 (0=SPVP). | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.2 |
| cwspAbrCallFwdMcr The Minimum Cell Rate for the ABR call in the forward
direction. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.20 |
| cwspAbrCallFwdIcr The Initial Cell Rate for the ABR call in the forward
direction.
This is the rate at which the source starts, both initially
and after an idle period. The value must not be larg… | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.21 |
| cwspAbrCallFwdRif The Rate Increase Factor for the ABR call in the forward
direction. This controls the rate at which the rate increases,
when a backward RM-cell is received with CI=0 and NI=0.
Lar… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.22 |
| cwspAbrCallFwdRdf The Rate Decrease Factor for the ABR call in the forward
direction. This controls the rate decrease which occurs
when backward RM-cells with CI=1, are received. Larger
values lea… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.23 |
| cwspAbrCallFwdNrm The Maximum Number of Cells a source may send for each
forward RM-cell in the forward direction for the ABR call.
The default value is nrm32(5). | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.25 |
| cwspAbrCallFwdTrm The Upper Bound on the time between forward RM-cells in the
forward direction for the ABR call. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.26 |
| cwspAbrCallFwdAdtf The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR
call in the forward direction. This is the time permitted
between sending RM-cells before the rate is decreased to I… | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.27 |
| cwspAbrCallFwdCdf The Cutoff Decrease Factor for the ABR call in the forward
direction. This controls the decrease in Allowed Cell Rate
(ACR) associated with missing RM-cell count (CRM). Larger
v… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.28 |
| cwspAbrCallFwdFrameDiscard Whether Frame Discard is enabled or disabled in the forward
direction for the ABR call. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.29 |
| cwspAbrCallCallRef The Call Reference value of the ABR call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.3 |
| cwspAbrCallBwdPcr The Peak Cell Rate for the ABR call in the backward
direction. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.30 |
| cwspAbrCallBwdMcr The Minimum Cell Rate for the ABR call in the backward
direction. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.31 |
| cwspAbrCallBwdIcr The Initial Cell Rate for the ABR call in the backward
direction.
This is the rate at which the source starts, both initially
and after an idle period. The value must not be lar… | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.32 |
| cwspAbrCallBwdRif The Rate Increase Factor for the ABR call in the backward
direction. This controls the rate at which the rate increases,
when a forward RM-cell is received with CI=0 and NI=0.
Lar… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.33 |
| cwspAbrCallBwdRdf The Rate Decrease Factor for the ABR call in the backward
direction. This controls the rate decrease which occurs
when forward RM-cells with CI=1, are received. Larger
values lea… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.34 |
| cwspAbrCallBwdTbe The Transient Buffer Exposure for the ABR call in the backward
direction. This is the negotiated number of cells that the
network would like to limit the source to sending during
… | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.35 |
| cwspAbrCallBwdNrm The Maximum Number of Cells a source may send for each forward
RM-cell in the backward direction for the ABR call. The default
value is nrm32(5). | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.36 |
| cwspAbrCallBwdTrm The Upper Bound on the time between forward RM-cells in the
backward direction for the ABR call. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.37 |
| cwspAbrCallBwdAdtf The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR
call in the backward direction. This is the time permitted
between sending RM-cells before the rate is decreased to … | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.38 |
| cwspAbrCallBwdCdf The Cutoff Decrease Factor for the ABR call in the backward
direction. This controls the decrease in Allowed Cell Rate
(ACR) associated with missing RM-cell count (CRM). Larger
… | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.39 |
| cwspAbrCallClgAddress The Calling Party Address of the ABR call. | column | ATM-FORUM-TC-MIBAtmAddress | .1.3.6.1.4.1.351.140.1.2.9.1.1.4 |
| cwspAbrCallBwdFrameDiscard Whether Frame Discard is enabled or disabled in the backward
direction for the ABR call. | column | Enumeration | .1.3.6.1.4.1.351.140.1.2.9.1.1.40 |
| cwspAbrCallFrtt The Fixed Round-Trip Time for the ABR call. This is the sum
of the fixed and propagation delays from the source to the
furthest destination and back. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.41 |
| cwspAbrCallMaxCtd The Maximum Cell Transfer Delay for the ABR call on this
interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.42 |
| cwspAbrCallMaxFwdCdv The Maximum Cell Delay Variation in the forward direction
for the ABR call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.43 |
| cwspAbrCallMaxFwdClr The Maximum Cell Loss Ratio in the forward direction for
the ABR call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.44 |
| cwspAbrCallMaxBwdCdv The Maximum Cell Delay Variation in the backward direction
for the ABR call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.45 |
| cwspAbrCallMaxBwdClr The Maximum Cell Loss Ratio in the backward direction for
the ABR call on this interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.46 |
| cwspAbrCallCldAddress The Called Party Address of the ABR call. | column | ATM-FORUM-TC-MIBAtmAddress | .1.3.6.1.4.1.351.140.1.2.9.1.1.5 |
| cwspAbrCallClgSubAddr The Calling Party Subaddress of the ABR call. | column | ATM-FORUM-TC-MIBAtmAddress | .1.3.6.1.4.1.351.140.1.2.9.1.1.6 |
| cwspAbrCallCldSubAddr The Called Party Subaddress of the ABR call. | column | ATM-FORUM-TC-MIBAtmAddress | .1.3.6.1.4.1.351.140.1.2.9.1.1.7 |
| cwspAbrCallOtherIntfIndex The Other Interface ID of the ABR call. Generally this
would be the outgoing/egress interface for the call. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.8 |
| cwspAbrCallOtherIntfVpi The VPI value of the ABR call on the partner interface. | column | Integer32 | .1.3.6.1.4.1.351.140.1.2.9.1.1.9 |