CISCO-WAN-ATM-CONN-MIB Table View

This table contains mandatory endpoint configuration
for all SPVC connections.Most of the objects in this
table are applicable to all provisioned endpoints for all
service categories. The objects cwaChanAbrZZZ however,
provide additional configuration information which apply
to ABR endpoints only.
          
Routing parameters 'cwaChanCDV', 'cwaChanCTD',
'cwaChanRemoteCDV', 'cwaChanRemoteCTD' and 
'cwaChanMaxCost' cannot be set
on a slave endpoint(i.e.if 'cwaChanRoutingMastership'
is set to 'false').

cwAtmChanCnfgEntry row .1.3.6.1.4.1.351.150.1.1.1.1.1

An entry in the cwAtmChanCnfgTable. The each entry
corresponds to a connection endpoint identified
by interface(ifIndex),Virtual Path Identifier(VPI)
and Virtual Channel Identifier(VCI). The ifIndex
is for those entries…

Indexes

IF-MIBifIndex cwaChanVpi cwaChanVci

Column	Syntax	OID
cwaChanVpi The VPI value of a VP or VC connection. The cwaChanVpcFlag serves to distinguish if this is a VP/VC connection	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.351.150.1.1.1.1.1.1
cwaChanVci The VCI value of VC connection. The cwaChanVpcFlag serves to distinguish if this is a VP/VC connection. For a VPC, the VCI is irrelevant and is set to a value of 0	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.351.150.1.1.1.1.1.2
cwaChanServiceCategory This object identifies the service type to which this connection belongs. The service type specified is one among the ATM forum service types and implicitly determines the configuration for GCRA. This Ob…	CiscoAtmServiceCategoryr/w Type Values: 1 cbr1 2 vbr1RT 3 vbr2RT 4 vbr3RT 5 vbr1nRT 6 vbr2nRT 7 vbr3nRT 8 ubr1 9 ubr2 10 abr 11 cbr2 12 cbr3	.1.3.6.1.4.1.351.150.1.1.1.1.1.3
cwaChanVpcFlag This object indentifies if the endpoint is a VP/VC endpoint. For a VPC, this object is set to true(1); For a VCC, this object is set to false(2). This Object can be set only during row creation.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.4
cwaChanIdentifier This number represents a RESOURCE at the switch that has been assigned for this connection (identified by ifIndex, cwaChanVpi and cwaChanVci). An example of this resource could be the LCN/GLCN used by the switch. Anothe…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.5
cwaChanUploadCounter This counter tracks the number of configuration changes that happen on a specific endpoint (identified by ifIndex, cwaChanVpi, and cwaChanVci). The value of this object is derived from cwChanGlobalTransa…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.6
cwaChanStatsEnable Limits imposed by software or hardware implementations could restrict the amount of statistical data that can be maintained in a physical entity (like a service module card). Hence there could be a need to restrict stat…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.7
cwaChanCCEnable This object serves to enable or disable continuity check(CC) on a connection endpoint. When continuity check is enabled on an endpoint, the endpoint anticipates OAM CC cells from its peer endpoint. OAM CC cells are sen…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.8
cwaChanLocalVpi This object identifies the internal VPI assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and the cwaChanLocalNSAPAddr, form a unique identifier for the connection endpoint in the network…	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.351.150.1.1.1.1.1.9
cwaChanLocalVci This object identifies the internal VCI assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and the cwaChanLocalNSAPAddr, form a unique identifier for the connection endpoint in the network…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.351.150.1.1.1.1.1.10
cwaChanLocalNSAPAddr This object identifies the internal NSAP assigned to a local endpoint, by the switch. The cwaChanLocalVpi, cwaChanLocalVci and the cwaChanLocalNSAPAddr, form a unique identifier for the connection endpoint in the networ…	CiscoWanNsapAtmAddress Type Constraints: range: 20	.1.3.6.1.4.1.351.150.1.1.1.1.1.11
cwaChanRemoteVpi This object identifies the VPI of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, identify the peer endpoint in the networking domain. If the object 'cwaChanP2M…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.351.150.1.1.1.1.1.12
cwaChanRemoteVci This object identifies the VCI of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, identify the peer endpoint in the networking domain. If the object 'cwaChanP2M…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.150.1.1.1.1.1.13
cwaChanRemoteNSAPAddr This object identifies the NSAP of the peer endpoint. The cwaChanRemoteVpi, cwaChanRemoteVpi and the cwaChanRemoteNSAPAddr, identify the peer endpoint in the networking domain. If the object 'cwaChanP2…	CiscoWanNsapAtmAddressr/w Type Constraints: range: 20	.1.3.6.1.4.1.351.150.1.1.1.1.1.14
cwaChanControllerId This object serves to associate an endpoint with a specific controller. Usually resource partitioning makes the association between a controller and a range of vpi-vci. There could be switches where hard partitioning o…	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.351.150.1.1.1.1.1.15
cwaChanRoutingMastership This object, if set to true(1) identifies that this endpoint as the `master' endpoint of the connection. When set to false(2) this identifies the `slave' endpoint of the connection. The slave endpoint is the called part…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.16
cwaChanMaxCost This object is used by the networking entity to select a route based on administrative weight of possible routes. Administrative weights of links and nodes contained in a path are aggregated and compared…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.17
cwaChanReroute This is used by the administrator to trigger the re-routing of the connection. * Rerouting takes effect, when this object is set to true(1). When set to false(2), no action is taken. * A ge…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.18
cwaChanFrameDiscard When set to true(1), enables the frame discard feature for the connection. This is applicable only to the master endpoint (cwaChanRoutingMastership is true) and only for VCC connections.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.19
cwaChanOperStatus Reflects operational status of an endpoint. * This object is set to operFail(2), if the connection is not routed or if the endpoint receives AIS/RDI or if there is a CC failure. * If the connection is administrativ…	CiscoWanOperStatus Type Values: 1 operOk 2 operFail 3 adminDown	.1.3.6.1.4.1.351.150.1.1.1.1.1.20
cwaChanPCR Peak cell rate (PCR) for the direction local -> remote	cells per secondUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.21
cwaChanMCR Minimum cell rate (MCR) for the direction local -> remote	cells per secondUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.22
cwaChanSCR Sustainable cell rate (SCR) for the direction local -> remote	cells per secondUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.23
cwaChanCDV Maximum tolerable cell delay variation in the direction local -> remote. Setting this parameter to 0xFFFFFF(16777215) indicates to the switch that this parameter does not have significance in SPVC call…	microsecondsUnsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.351.150.1.1.1.1.1.24
cwaChanCTD Maximum tolerable network transfer delay in the direction local -> remote. Setting this parameter to 0xFFFF(65535) indicates to the switch that this parameter does not have significance in SPVC call se…	millisecondsUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.150.1.1.1.1.1.25
cwaChanMBS Maximum Burst Size (MBS) used in the direction local -> remote	cellsUnsigned32r/w Constraints: range: 0-5000000	.1.3.6.1.4.1.351.150.1.1.1.1.1.26
cwaChanCDVT Cell delay variation tolerance(CDVT) used in the direction local -> remote. Setting this parameter to 0xFFFFFFFF(4294967295) indicates to the switch that it may use a default value of CDVT	microsecondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.27
cwaChanPercentUtil This factor provides a per connection control for overbooking bandwidth. This is used in conjunction with the VSI interface policy while performing CAC. This is applied for the direction local -> remote	Unsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.351.150.1.1.1.1.1.28
cwaChanRemotePCR Peak cell rate (PCR) for the direction remote -> local. If the object 'cwaChanP2MP' is set to 'true', this object should not be 'set' and the value of this object, if any, is not meaningful.	cells per secondUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.29
cwaChanRemoteMCR Minimum cell rate for the direction remote -> local	cells per secondUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.30
cwaChanRemoteSCR Sustainable cell rate for the direction remote -> local	cells per secondUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.31
cwaChanRemoteCDV Maximum tolerable cell delay variation for the direction remote -> local. Setting this parameter to 0xFFFFFF(16777215) indicates to the switch that this parameter does not have significance in SPVC call setup. …	microsecondsUnsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.351.150.1.1.1.1.1.32
cwaChanRemoteCTD Maximum tolerable network transfer delay in the direction direction remote -> local. Setting this parameter to 0xFFFF(65535) indicates to the switch that this parameter does not have significance in SPVC…	millisecondsUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.150.1.1.1.1.1.33
cwaChanRemoteMBS Maximum Burst Size (MBS) used in the direction remote -> local. If the object 'cwaChanP2MP' is set to 'true', this object should not be 'set' and the value of this object, if any, is not meaningful.	cellsUnsigned32r/w Constraints: range: 0-5000000	.1.3.6.1.4.1.351.150.1.1.1.1.1.34
cwaChanRemoteCDVTdeprecated Cell delay variation tolerance(CDVT) used in the direction remote -> local. Setting this parameter to 0xFFFFFFFF(4294967295) indicates to the switch that it may use a default value of CDVT. …	cellsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.35
cwaChanRemotePercentUtil This factor provides a per connection control for overbooking bandwidth. This is used in conjunction with the VSI interface policy while performing CAC. This is applied for the direction remote -> local. …	Unsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.351.150.1.1.1.1.1.36
cwaChanAbrICR Initial cell rate: Rate at which a source should send initially after an idle period. The value must not be larger than the PCR	cells/secUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.1.1.1.37
cwaChanAbrADTF ACR Decrease Time Factor. This is the time permitted between sending RM-cells (Resource Mangement Cells) before the rate is decreased to ICR (Initial Cell Rate).	10 millisecondsUnsigned32r/w Constraints: range: 1-1023	.1.3.6.1.4.1.351.150.1.1.1.1.1.38
cwaChanAbrRDF Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1 are received. Larger values lead to faster rate decrease. This factor is applied at both the local and remote endpoints, thu…	AbrRateFactorsr/w Type Values: 1 oneOver32768 2 oneOver16384 3 oneOver8192 4 oneOver4096 5 oneOver2048 6 oneOver1024 7 oneOver512 8 oneOver256 9 oneOver128 10 oneOver64 11 oneOver32 12 oneOver16 13 oneOver8 14 oneOver4 15 oneOver2 16 one	.1.3.6.1.4.1.351.150.1.1.1.1.1.39
cwaChanAbrRIF Rate Increase Factor: Controls the rate increase which occurs when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase This factor is applied at both the local and remote endpo…	AbrRateFactorsr/w Type Values: 1 oneOver32768 2 oneOver16384 3 oneOver8192 4 oneOver4096 5 oneOver2048 6 oneOver1024 7 oneOver512 8 oneOver256 9 oneOver128 10 oneOver64 11 oneOver32 12 oneOver16 13 oneOver8 14 oneOver4 15 oneOver2 16 one	.1.3.6.1.4.1.351.150.1.1.1.1.1.40
cwaChanAbrNRM Maximum number of cells a source may send for each forward RM-cell	Enumerationr/w Enumerated Values: 1 nrm2 2 nrm4 3 nrm8 4 nrm16 5 nrm32 6 nrm64 7 nrm128 8 nrm256	.1.3.6.1.4.1.351.150.1.1.1.1.1.41
cwaChanAbrTRM Upper bound on the time between forward RM-cells for an active source (in milliseconds)	Enumerationr/w Enumerated Values: 1 trm0point78125 2 trm1point5625 3 trm3point125 4 trm6point25 5 trm12point5 6 trm25 7 trm50 8 trm100	.1.3.6.1.4.1.351.150.1.1.1.1.1.42
cwaChanAbrCDF Cutoff Decrease Factor: Controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in faster rate decrease	Enumerationr/w Enumerated Values: 1 cdf0 2 cdfOneOver64 3 cdfOneOver32 4 cdfOneOver16 5 cdfOneOver8 6 cdfOneOver4 7 cdfOneOver2 8 cdfOne	.1.3.6.1.4.1.351.150.1.1.1.1.1.43
cwaChanAbrFRTT Fixed round trip time: Sum of the fixed propagation delays from the source to a destination network.	microsecondsUnsigned32r/w Constraints: range: 0-16700000	.1.3.6.1.4.1.351.150.1.1.1.1.1.44
cwaChanAbrTBE Transient Buffer Exposure. This is a negotiated number of cells that the network would like to limit the source to sending during startup periods, before the first RM-cell returns	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.351.150.1.1.1.1.1.45
cwaChanAbrERSdeprecated Configuration of an endpoint for Explicit Rate Stamping. Refer the Textual convention for possible values	CiscoWanERSConfgr/w Type Values: 1 none 2 enableIngress 3 enableEgress 4 enableBoth	.1.3.6.1.4.1.351.150.1.1.1.1.1.46
cwaChanAbrVSVDEnable Abr connections require close loop control to limit the transmission rate, depending on the network bandwidth. Now this close loop can be end to end or between intermediate network segments. When terminating an Abr V…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.47
cwaChanRowStatus This object is used to create, modify or delete an entry in the ciscoWanAtmChanTable. * A row may be created using the 'CreateAndGo' option. When the row is successfully created, the RowStatus would be se…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.351.150.1.1.1.1.1.48
cwaChanIntAbrVSVD This object is used for enabling/disabling VSVD internal to a segment i.e the closed loop control is in effect between the two provisioned endpoints of the SPVC.	CiscoWanVSVDConfgr/w Type Values: 1 vsvdOff 2 vsvdOn 3 switchDefault	.1.3.6.1.4.1.351.150.1.1.1.1.1.49
cwaChanExtAbrVSVD This object is used for enabling/disabling VSVD external to the segment which hosts the two endpoints of the SPVC i.e the closed loop control will be in effect outside the segment either towards a CPE or towards anot…	CiscoWanVSVDConfgr/w Type Values: 1 vsvdOff 2 vsvdOn 3 switchDefault	.1.3.6.1.4.1.351.150.1.1.1.1.1.50
cwaChanAisIWCapabilitydeprecated This object is used for achieving OAM inter-operability between switches that cannot generate/detect segment AIS cells. This attribute enables the newer generation of switches to understand the OAM capability of the …	CiscoWanAisIWr/w Type Values: 1 e2eAisCapable 2 segAisCapable	.1.3.6.1.4.1.351.150.1.1.1.1.1.51
cwaChanCLR Encoded value representing the maximum tolerable cell loss ratio in the direction local -> remote. The actual CLR value is derived as the negative logarithm of this value.	Unsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.351.150.1.1.1.1.1.52
cwaChanRemoteCLR Encoded value representing the maximum tolerable cell loss ratio in the direction remote -> local. The actual CLR value is derived as the negative logarithm of this value. If the object 'cwaChanP2MP'…	Unsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.351.150.1.1.1.1.1.53
cwaChanOamSegEpEnable This object controls the setting / resetting of the OAM segment endpoint. When set to OamSegEp (1), the SPVC endpoint would terminate all segment OAM FM cells and loopback all OAM segment loopback cells. When set to…	Enumerationr/w Enumerated Values: 1 oamSegEp 2 nonOamSegEp	.1.3.6.1.4.1.351.150.1.1.1.1.1.54
cwaChanSlaveType This object indicates whether a master endpoint has a persistent slave or not. A connection with a master and a non-persistent slave is considered a single-ended SPVC. This object is only meaningful when …	Enumerationr/w Enumerated Values: 1 persistentSlave 2 nonPersistentSlave	.1.3.6.1.4.1.351.150.1.1.1.1.1.55
cwaChanRoutingPriority This object is the routing priority of the connection. When adding the connection, a default routing priority of 8 is used if this is not specified. This parameter is not allowed to be set at the slave endpoint(i.e. if …	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.351.150.1.1.1.1.1.56
cwaChanP2MP This is used by the administrator to configure this master endpoint to be the root of a point-to-multipoint connection. When this variable is set to 'true', this master endpoint is the root of a point-t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.57
cwaChanPrefRouteId This object serves to to associate a preferred route with a connection. The value '0' means no preferred route is associated with this connection. Usage: - If the value of this set to 0, …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.351.150.1.1.1.1.1.58
cwaChanDirectRoute This object serves to associate a prefer route as directed route (correspond to the prefer route object cwaChanPrefRouteId). A directed route specifies that the associated preferred route is the only per…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.351.150.1.1.1.1.1.59

This table contains channel status information for all 
ATM connections configured in cwAtmChanCnfgTable.

cwAtmChanStateEntry row .1.3.6.1.4.1.351.150.1.1.2.1.1

An entry in cwAtmChanStateTable.

Indexes

IF-MIBifIndex cwaChanVpi cwaChanVci

Column	Syntax	OID
cwaChanAlarmState Defines alarms associated with an endpoint. Refer description in the textual convention.	CiscoWanAlarmState Type Values: 1 ingAisRdi 2 egrAisRdi 4 conditioned 8 interfaceFail 16 ccFail 32 mismatch 64 ingAbitFail	.1.3.6.1.4.1.351.150.1.1.2.1.1.1
cwaChanEgressXmtState This is the state of the transmit portion of the endpoint in the egress direction	CiscoWanXmtState Type Values: 1 normal 2 sendingAIS 3 sendingRDI	.1.3.6.1.4.1.351.150.1.1.2.1.1.2
cwaChanEgressRcvState This is the state of the receive portion of the endpoint in the egress direction	CiscoWanRcvState Type Values: 1 normal 2 receivingRDI 3 receivingAIS 4 ccFailure	.1.3.6.1.4.1.351.150.1.1.2.1.1.3
cwaChanIngressXmtState This is the state of the transmit portion of the endpoint in the ingress direction	CiscoWanXmtState Type Values: 1 normal 2 sendingAIS 3 sendingRDI	.1.3.6.1.4.1.351.150.1.1.2.1.1.4
cwaChanIngressRcvState This is the state of the receive portion of the endpoint in the ingress direction	CiscoWanRcvState Type Values: 1 normal 2 receivingRDI 3 receivingAIS 4 ccFailure	.1.3.6.1.4.1.351.150.1.1.2.1.1.5

This table contains configuration information for performing
connection diagnostics on ATM Connections and to obtain
results after testing

cwAtmChanTestEntry row .1.3.6.1.4.1.351.150.1.1.3.1.1

An entry in cwAtmChanTestTable for each ATM Connection
endpoints.

Indexes

IF-MIBifIndex cwaChanVpi cwaChanVci

Column	Syntax	OID
cwaChanTestType This object configures an endpoint in loopback: This is a mandatory object. * To configure a destructive loopback, this object needs to be set to destructive (2). The direction in which th…	CiscoWanLpbkTypesr/w Type Values: 1 noLpbk 2 destructive 3 nonDestructive	.1.3.6.1.4.1.351.150.1.1.3.1.1.1
cwaChanTestDir Specifies the direction in which loopback should be effected: This is a mandatory object. * For destructive loopback, this takes values external (1) and internal (2). * For non-destructive…	CiscoWanLpbkDirr/w Type Values: 1 external 2 internal 3 forward 4 reverse	.1.3.6.1.4.1.351.150.1.1.3.1.1.2
cwaChanTestIterations Specifies number of loopback cells to inject. This applies to the non-destructive mode of loopback tests only. Get operation on this object returns the successful number of loopback iterations performed on the endpoint.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.351.150.1.1.3.1.1.3
cwaChanTestState This object reflects the status of the last requested test: * If a loopback had never been effected on an endpoint, this object reads noStatus (1). * If a destructive mode of loopback is configured on an endpoint, …	CiscoWanTestStatus Type Values: 1 noStatus 2 lpbkInProgress 3 lpbkSuccess 4 lpbkAbort 5 lpbkTimeOut 6 lpbkInEffect	.1.3.6.1.4.1.351.150.1.1.3.1.1.4
cwaChanTestRoundTripDelay This object is applicable only for non-destructive mode of loopback. It returns the round trip delay measured during the last non-destructive loopback test	microsecondsUnsigned32 Constraints: range: 1-100000000	.1.3.6.1.4.1.351.150.1.1.3.1.1.5

This table contains objects that are required for
configuration upload. The configuration upload
is a mechanism where the configuration(physical or
logical information)of a switch is created in
a file and that file is uploaded by the NMS application
using file transfer method(for example FTP).

cwGlobalChanDataEntry row .1.3.6.1.4.1.351.150.1.1.5.1.1

Entry containing generic information that apply to
all provisined connections(ATM/Frame Relay).

Indexes

cwSlotIndex

Column	Syntax	OID
cwSlotIndex This object's value generally corresponds to the Slot number where the module resides. However, System wide uniqueness is the only true requirement.	Unsigned32 Constraints: range: 1-429496729	.1.3.6.1.4.1.351.150.1.1.5.1.1.1
cwChanGlobalTransactionId This reflects the transaction Identifier of the last successful connection configuration on the slot (represented by cwSlotIndex). The value of this object is incremented every time a connection(ATM/Fra…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.351.150.1.1.5.1.1.2