CADANT-CMTS-LAYER2CMTS-MIB Table View

A table (and along with other supported tables)
contains bridge group information. 
A bridge group is actually a Port-Vlan concept
which consists of one or more E-ports and one 
or more D-ports. 
          
Each D-port includes its associated U-ports and is
further subdivided into 3 sub-ports associated with
different types of traffic.  The CM sub-port carries
traffic for the cable-modem itself.  The CPEAUTH sub-port
carries traffic for an authorized CPE behind a cable-modem.
The CPEUNAUTH sub-port carries traffic for an unauthorized
CPE behind a cable-modem.
          
Initially, all ports belong to the OAM&P bridge group when
a card is first provisioned.  Bridge ports can only exist
in one bridge group at a time and can be moved between them.
          
Generally, the CPEAUTH sub-port on the D card would be in a
bridge group with an E port that had access to the internet
and the DHCP servers for the ISP used by the subscriber.
The CM sub-port would be in a bridge group with an E port that
had access to the DHCP servers and administrative controls
for the MSO. The CPEUNAUTH sub-port would be in a bridge 
group that included access to a sign-on server.

cadBridgeGroupEntry row .1.3.6.1.4.1.4998.1.1.20.1.1.2.1

A conceptual row containing information about different types of CMTS's
broadcast domains and their configuration parameters.

Indexes

cadBgIndex

Column	Syntax	OID
cadBgIndex CMTS broadcast domain Id. Used as index. It has a value from 1 to the value of bridgeGroupMaxNum	CADANT-TCCadBridgeGroupId Type Constraints: range: 33..255	.1.3.6.1.4.1.4998.1.1.20.1.1.2.1.1
cadBgName Symbolic Name of the domain.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4998.1.1.20.1.1.2.1.2
cadBgRowStatus Control Object for row creation and deletion.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.1.1.2.1.11

A table which contains read-only (status) information on bridge groups.

cadBridgeGroupStatsEntry row .1.3.6.1.4.1.4998.1.1.20.1.1.10.1

A conceptual row containing read-only information on bridge groups.

Indexes

No indexes recorded

Column	Syntax	OID
cadBgLeaderBgpId The bridge port that is the leader for this bridge group. If there are no bridge ports in this bridge group or there are multiple bridge ports in this bridge group but none of them make a clear leader, then cadBgLeaderB…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4998.1.1.20.1.1.10.1.1
cadBgMacAddress The mac address of the layer 2 entity associated with this bridge group. If there are no layer 2 entities associated with the bridge group, this value will be zero. In the case of a bundle, this will be the mac address …	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.1.1.10.1.2

A table contain broadcast domain Ports Configuration
(i.e. E ports, D-ports, M-Ports...etc)

cadBridgePortEntry row .1.3.6.1.4.1.4998.1.1.20.1.1.11.1

A conceptual row containing port configuration within a
bridge group.

Indexes

cadBgpId cadBgpType

Column	Syntax	OID
cadBgpGroupId Bridge group index. The same index used in bridgeGroupTable to identify a bridge group.	CADANT-TCCadBridgeGroupIdr/w Type Constraints: range: 33..255	.1.3.6.1.4.1.4998.1.1.20.1.1.11.1.1
cadBgpId The secondary index of this table identifies a port in a given bridge group.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.1.11.1.2
cadBgpCardId The slot number of the card containing this bridge port.	CADANT-TCCardId Type Constraints: range: 0..99	.1.3.6.1.4.1.4998.1.1.20.1.1.11.1.3
cadBgpCardType The primary Card Type. Refer to Cadant's Equipment Mib for CerCardType definition.	CADANT-TCCerCardType Type Values: 0 invalid 1 fan 2 pem 3 ccm 4 cdm 5 sam 6 rsm 7 ucam 8 dcam 98 unknown	.1.3.6.1.4.1.4998.1.1.20.1.1.11.1.4
cadBgpPortId The port number of the physical port containing this bridge port.	CADANT-TCPortId Type Constraints: range: 0..392	.1.3.6.1.4.1.4998.1.1.20.1.1.11.1.5
cadBgpType The type of this bridge port.	CADANT-TCCadBridgePortType Type Values: 1 cm 2 cpeauth 3 cpeunauth 4 any 5 none	.1.3.6.1.4.1.4998.1.1.20.1.1.11.1.6
cadBgpBundleGroupId The bridge port which is the bundle leader. If this value is 0, then this port is not part of a bundle group. If this value is equal to its cadBgpId, then this port is the bundle leader for its group. Otherwise, this va…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4998.1.1.20.1.1.11.1.10
cadBgpMacAddress The current mac address associated with the bridge port. Initially, this is the address associated with the MAC or Ethernet port, but can change as a result of bundling or sparing operations.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.1.1.11.1.11

A table which contains status information
on bridge group members.

cadBridgeGroupPortStatusEntry row .1.3.6.1.4.1.4998.1.1.20.1.1.12.1

A conceptual row containing status information
on possible bridge group members.

Indexes

cadBgpStatGroupId cadBgpStatMacIfIndex cadBgpStatPhyIfIndex

Column	Syntax	OID
cadBgpStatGroupId The bridge group id to which this physical interface belongs.	CADANT-TCCadBridgeGroupId Type Constraints: range: 33..255	.1.3.6.1.4.1.4998.1.1.20.1.1.12.1.1
cadBgpStatMacIfIndex The ifIndex of the layer 2 entity associated with the bridge group.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.1.12.1.2
cadBgpStatPhyIfIndex The ifIndex of the physical entity associated with the bridge group. This ifIndex corresponds to an actual physical port on the C4. For NAM ports that are both a layer 2 and physical entity, this value may be the same…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.1.12.1.3
cadBgpStatPhyCardId The cardId of the slot associated with the physical ifindex.	CADANT-TCCardId Type Constraints: range: 0..99	.1.3.6.1.4.1.4998.1.1.20.1.1.12.1.4
cadBgpStatPhyPortId The portId of the port associated with the physical ifindex.	CADANT-TCPortId Type Constraints: range: 0..392	.1.3.6.1.4.1.4998.1.1.20.1.1.12.1.5

This table extends the dot3adAggTable to control LACP.

cadDot3adAggEntry row .1.3.6.1.4.1.4998.1.1.20.1.1.13.1

This is an extension of the dot3adAggEntry
table that adds a LAG-level LACP enable.

Indexes

cadDot3adAggId

Column	Syntax	OID
cadDot3adAggId The unique identifier allocated to this Aggregator by the CMTS system.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.1
cadDot3adAggIndex The unique ifInex to identify this Aggregator.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.2
cadDot3adAggMacAddress The MAC address of this Aggregator.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.3
cadDot3adAggLacpEnable TRUE if LACP is enabled for this LAG, FALSE if it is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.4
cadDot3adAggLacpMode The default administrative status of the LACP protocol for ports In this LAG. Controls bit 0 of dot3adAggPortPartnerOperState to zero for passive and is set to one for active.	Enumerationr/w Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.5
cadDot3adAggLacpRate Specifies the default requested exchange rate of LACP packets for ports In this LAG. Controls bit 1 (LACP_Timeout) in dot3adAggPortActorOperState slow(1): The device requests its peers to send LACP packets …	Enumerationr/w Enumerated Values: 1 slow 2 fast	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.6
cadDot3adAggMinLinks Sets the minimum number of ports that must be able to pass dataplane traffic for this LAG to be in-service. If the number of such ports in this LAG falls below this value, the entire LAG goes OOS.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.7
cadDot3adAggDescription The description of the Link Aggregation Group.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.8
cadDot3adAggTrapInh If a bit is set, the corresponding state change trap will not be sent. By default only linkUp and linkDown notifications are enabled.	Bitsr/w Enumerated Values: 0 primary 1 secondary 2 duplex 3 linkUpLinkDown	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.9
cadDot3adAggAdminState The administrative state of the Link Aggregation Group.	CADANT-TCAdminStater/w Type Values: 1 up 2 down	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.10
cadDot3adAggPrState The primary state of the Link Aggregation Group.	CADANT-TCPrimaryState Type Values: 1 is 2 oos	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.11
cadDot3adAggSecState The secondary state of the Link Aggregation Group.	CADANT-TCSecondaryState Type Values: 0 notapplicable 1 manual 2 fault 3 diagnostic 4 overload 5 normal 6 degrade 7 initializing 8 swdownload 9 firmwarepump 10 powerup 11 bootdkm	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.12
cadDot3adAggRowStatus Control Object for row creation and deletion.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.13
cadDot3adAggSystemID Equivalent to the dot3adAggActorSystemID in the dot3adAggTable. A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.14

MAC port table.

cadMacPortEntry row .1.3.6.1.4.1.4998.1.1.20.1.4.1.1

Indexes

cadMacPortId

Column	Syntax	OID
cadMacPortId MAC port id which uniquely identifies a MAC port. Mac port Id range from 417 to 448 are reserved for 2D12U CAMs.	CADANT-TCMacPortId Type Constraints: range: 1..416	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.1
cadMacPortAdminState The administrative state of the MAC port.	CADANT-TCAdminStater/w Type Values: 1 up 2 down	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.4
cadMacPortPrState The primary state of the MAC port.	CADANT-TCPrimaryState Type Values: 1 is 2 oos	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.5
cadMacPortSecState The secondary state of the MAC port.	CADANT-TCSecondaryState Type Values: 0 notapplicable 1 manual 2 fault 3 diagnostic 4 overload 5 normal 6 degrade 7 initializing 8 swdownload 9 firmwarepump 10 powerup 11 bootdkm	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.6
cadMacPortDplxStatus The duplex status of the MAC port.	CADANT-TCDuplexStatus Type Values: 0 notapplicable 1 active 2 standby 3 simplex 4 protected	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.7
cadMacPortMacAddress The MAC address of the MAC port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.8
cadMacPortIfIndex The ifIndex of the MAC port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.9
cadMacPortDescription The description of the MAC port.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.10
cadMacPortTrapInh If a bit is set, the corresponding state change trap will not be sent. By default only linkUp and linkDown notifications are enabled.	Bitsr/w Enumerated Values: 0 primary 1 secondary 2 duplex 3 linkUpLinkDown	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.11
cadMacPortRowStatus Control object for row creation and deletion.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.12
cadMacPortOfdm If set to true, DOCSIS 3.1 is enabled for this MAC Port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.1.1.13

The cadIfMacDomainTable maintains configuration information specific to
each MAC domain. The table is indexed by the MAC domain ifIndex(from the 
ifTable or the cadMacPortTable).

cadIfMacDomainEntry row .1.3.6.1.4.1.4998.1.1.20.1.4.2.1

Indexes

cadIfMacDomainIfIndex

Column	Syntax	OID
cadIfMacDomainIfIndex MAC domain ifIndex	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.1
cadIfMacDomainCapabilities Identifies the capabilities of the CMTS MAC implementation at this interface.	Bits Enumerated Values: 0 atmCells 1 concatentation	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.2
cadIfMacDomainSyncInterval Interval between CMTS transmission of successive SYNC messages at this interface.	MillisecondsInteger32r/w Constraints: range: 1-200	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.3
cadIfMacDomainUcdInterval Interval between CMTS transmission of successive UCD messages for each upstream at this interface.	MillisecondsInteger32r/w Constraints: range: 1-2000	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.4
cadIfMacDomainMaxServiceIds Maximum number of service IDs that may be simultaneously active.	Integer32 Constraints: range: 1-16383	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.5
cadIfMacDomainInvitedRangingAttempts Maximum number of attempts to make on invitations for ranging requests. A value of 0 means the system should attempt to range forever.	Integer32r/w Constraints: range: 0-1024	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.6
cadIfMacDomainInsertInterval Amount of time between each broadcast station maintenance grant.	CentisecondsInteger32r/w Constraints: range: 0-200	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.7
cadIfMacDomainRangingInterval Amount of time to elapse between each ranging message.	CentisecondsInteger32r/w Constraints: range: 500-3500	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.8
cadIfMacDomainRangeOpportunityCycle Amount of time to elapse between each ranging cycle.	CentisecondsInteger32r/w Constraints: range: 100-500	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.9
cadIfMacDomainTftpEnforce Current state of TFTP enforce for this interface.	CadTftpEnforceTyper/w Type Values: 0 disabled 1 enabled 2 mark-only 3 lock 4 block	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.10
cadIfMacDomainDynamicSecret Current state of Cable Dynamic Secret for this interface.	CadDynamicSecretTyper/w Type Values: 0 disabled 1 reject 2 mark 3 lock 4 block	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.11
cadIfMacDomainAnnex The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-J83 is used. annexB : Annex B from ITU-J83 is used. annexC : Annex C from ITU-J83…	Enumerationr/w Enumerated Values: 1 unknown 2 other 3 annexA 4 annexB 5 annexC	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.13
cadIfMacDomainMddInterval This attribute configures the interval for the insertion of MDD messages in each downstream channel of a MAC Domain.	millisecondsUnsigned32r/w Constraints: range: 1-2000	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.14
cadIfMacDomainIpProvMode This attribute configures the CMTS IP provisioning mode for a MAC Domain. When this attribute is set to 'ipv4Only' the CM will acquire a single IPv4 address for the CM management stack. When this attribute is set to '…	Enumerationr/w Enumerated Values: 0 ipv4Only 1 ipv6Only 2 alternate 3 dualStack	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.16
cadIfMacDomainCmStatusEvCtlEnabled If set to 'true', this attribute enables the signaling of the CM-Status Event reporting mechanism.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.18
cadIfMacDomainUsFreqRange This attribute indicates in MDD messages the upstream frequency upper band edge of an upstream Channel. A value 'standard' means Standard Frequency Range and a value 'extended' means Extended Frequency Range.	Enumerationr/w Enumerated Values: 0 standard 1 extended	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.19
cadIfMacDomainMcastDsidFwdEnabled If set to 'true', this attribute enables the CMTS to use IP Multicast DSID Forwarding (MDF) for the MAC domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.20
cadIfMacDomainDsBondingEnabled If set to 'true', this attribute enables Downstream Channel Bonding for the MAC Domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.21
cadIfMacDomainMultTxChModeEnabled If set to 'true', this attribute enables Multiple Transmit Channel (MTC) Mode for the MAC Domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.22
cadIfMacDomainEarlyAuthEncrCtrl This attribute enables or disables early authentication and encryption (EAE) signaling for the MAC Domain. It also defines the type of EAE enforcement in the case that EAE is enabled. If set to 'disableEAE', EAE is …	Enumerationr/w Enumerated Values: 1 disableEae 2 enableEaeRangingBasedEnforcement 3 enableEaeCapabilityBasedEnforcement 4 enableEaeTotalEnforcement	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.23
cadIfMacDomainTftpProxyEnabled If set to 'true', this attribute enables TFTP Proxy functionality for the MAC Domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.24
cadIfMacDomainSrcAddrVerifEnabled If set to 'true', this attribute enables Source Address Verification (SAV) functionality for the MAC Domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.25
cadIfMacDomainMulticastEncryption If set to 'true', this attribute enables multicast encryption for all multicast flows on all downstream channels in the MAC domain using the des56 algorithm.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.26
cadIfMacDomainRcpReportMode This attribute controls the reporting of the CM receiver profiles in the registration messages. A value of 0 means that the CM MUST NOT provide verbose reporting of all its Receive Channel Profiles. A value of 1 means…	Enumerationr/w Enumerated Values: 0 nonVerbose 1 verbose	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.27
cadIfMacDomainRegRspToOverride This attribute provides an ability to override the default value of the T6 timer in the CM. When this attribute is not set to its default value, then the CMTS will place it into the MDD and the CM MUST use this value …	secondsUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.28
cadIfMacDomainMultRxChModeEnabled If set to true, this attribute enables Downstream Channel Bonding for the MAC Domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.29
cadIfMacDomainCmUdcEnabled If set to true, this attribute instructs the CMTS MAC Domain to enable Upstream Drop Classifiers (UDC) for the CMs attempting registration in this MAC Domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.30
cadIfMacDomainSendUdcRulesEnabled If set to true and when the CM signals to the CMTS 'Upstream Drop Classifier Group ID encodings, this attribute instructs the CMTS MAC Domain to send the Subscriber Management Filters rules associated with the Upstrea…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.31
cadIfMacDomainRccDynEnable This object allows user to enable or disable the autonomous creation of dynamic RCCs per mac domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.32
cadIfMacDomainDsbgDynEnable This object allows user to enable or disable the autonomous creation of dynamic bonding groups per mac domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.33
cadIfMacDomainDsbgReseqWaitTime Resequence wait time to se set for dynamic bonding groups per mac domain. If the value 255 indicates that requence wait time is determined by the CMTS.	hundredMicrosecondsUnsigned32r/w Constraints: range: 1-180 range: 255-255	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.34
cadIfMacDomainDsbgReseqWarnThrshld Resequence warning threshold to se set for dynamic bonding groups per mac domain. If the value 255 indicates that requence warning threshold is determined by the CMTS.	hundredMicrosecondsUnsigned32r/w Constraints: range: 0-179 range: 255-255	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.35
cadIfMacDomainDpId When a mac domain is created or system reset, DMM assigns a Downstream Pool ID (DPID) for each mac domain. If the value 255 indicates the DPID is invalid.	Integer32 Constraints: range: 255-255 range: 0-15	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.36
cadIfMacDomainUsbgDynEnable This object allows user to enable or disable the autonomous creation of dynamic upstream bonding groups per mac domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.37
cadIfMacDomainDownChannelMaxFrequency This object is used to configure the C4 CMTS to accept maximum downstream frequency limit that conform with the EuroDOCSIS specifications (starndard range 112 MHz to 858 MHz), (extended 85 MHz to 999MHz) or to the DOCSI…	hertzInteger32r/w Constraints: range: 858000000-858000000 range: 867000000-867000000 range: 999000000-999000000	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.38
cadIfMacDomainDownChannelMinFrequency This object is used to configure the C4 CMTS to accept minimum downstream frequency limit that conform with the EuroDOCSIS specifications (starndard range 112 MHz to 858 MHz), (extended 85 MHz to 999MHz) or to the DOCSI…	hertzInteger32r/w Constraints: range: 57000000-57000000 range: 85000000-85000000 range: 91000000-91000000 range: 112000000-112000000	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.39
cadIfMacDomainUpChannelMaxFrequency This object is used to configure the C4 CMTS to accept upstream frequency ranges that conform with the EuroDOCSIS specifications (5 MHz to 65 MHz), to the extended range used in Japan (5 MHz to 55 MHz), or to the DOCSIS…	hertzInteger32r/w Constraints: range: 42000000-42000000 range: 55000000-55000000 range: 65000000-65000000 range: 85000000-85000000	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.40
cadIfMacDomainBpi2Mandatory This object determines the what minimum level of BPI operation is required in order to allow a cable modem to register.	Enumerationr/w Enumerated Values: 0 none 1 bpi 2 bpiPlus	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.41
cadIfMacDomainDSG30Enabled If set to 'true', this attribute enables the CMTS to use DSG3.0 on the MAC domain. If false, then DSG reverts to the pre-DOCSIS3.0 version without DSIDs.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.43
cadIfMacDomainEnforceRulesEnabled If set to 'true', then QOS penalties as defined in the cadEnforceRuleTable will be enforced for SFs on CMs in this MAC Domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.44
cadIfMacDomainCmTxPwrExtentionPreRegistrationEnabled Indicate if the transmit power extension (before registration) feature is enabled or not onthe CMTS. If set to 'true', the CMTS will populate TLV16 in the MDD message with the value of 1. If set to 'false', the CMTS w…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.45
cadIfMacDomainCmTxPwrExtentionPostRegistrationEnabled Indicate if the transmit power extension (after registration) feature is enabled or not on the CMTS. If set to 'true', the CMTS will populate TLV5.40 in the REG-RSP-MP message with the same value received in the REG-REQ…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.46
cadIfMacDomainT4TimeoutMultiplierEnabled If set to true, this attribute instructs the CMTS MAC Domain to enable the T4 Timeout Multiplier for the CMs operating in MTCM in this MAC Domain. The multiplier will be set equal to the number of upstream assigned to t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.47
cadIfMacDomainDynamicRccMultiTunerEnabled If set to true, this attribute instructs the CMTS MAC Domain to enable dynamic RCC support for CM RCP's with multiple tuners.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.48
cadIfMacDomainTcsSizeLimit This object is used to potentially limit the number of channels within a CM's TCS. A value of 0 indicates the limit is determined by the CM's capabilities, configuration and operational status. When a non-zero value i…	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.49
cadIfMacDomainDocsis31Enabled If set to true, DOCSIS 3.1 is enabled for this MAC Domain.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.50
cadIfMacDomainEnergyMgt1x1Enabled This attribute indicates whether the CMTS is configured for 1x1 Energy Management Mode of operation on a per MAC Domain basis. If this attribute is set to 'true', the CMTS is configured for 1x1 Energy Management Mode …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.51
cadIfMacDomainDsOfdmProfileRecoveryGuardTime The amount of time that an impaired OFDM profile will remain impaired before transitioning to good upon being notified that the CM can decode the profile. This provides some hysteresis for a profile to become stable …	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.52
cadIfMacDomainGracefulTcsReductionEnabled If set to true, the CMTS will instruct the modem to try incrementally lower numbers of bonded channels instead of reverting immediately to single US bonded channel while registering a modem and a power shortfall or DRW …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.2.1.53

MAC channel table.

cadMacChlEntry row .1.3.6.1.4.1.4998.1.1.20.1.4.3.1

Indexes

cadMacChlMacDomainIfIndex cadMacChlChannelIfIndex

Column	Syntax	OID
cadMacChlMacDomainIfIndex ifIndex of the MAC domain	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.1
cadMacChlChannelIfIndex ifIndex of the upstream or downstream channel	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.2
cadMacChlCardNumber card number of downstream or upstream channel	CADANT-TCCardId Type Constraints: range: 0..99	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.3
cadMacChlPortId port Id of downstream or upstream channel	CADANT-TCPortId Type Constraints: range: 0..392	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.4
cadMacChlPortType port type of downstream or upstream channel	CADANT-TCPortType Type Values: 0 invalid 1 ureceiver 2 uchannel 3 eport10BaseT 4 eport100BaseT 5 eport1000BaseT 6 eport10000BaseT 8 macport 9 dchannelDocsis 10 dchannelVideo 11 linkAgg 12 dchannelVideoReplica 13 dchannelOfdm 98 unknown	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.5
cadMacChlCardSubType card subtype type of downstream or upstream channel	CADANT-TCCerCardSubType Type Values: 0 invalid 1 fan 2 pem 3 ccm 4 cdm 5 sam 6 rsm10g 7 ucam96m24c 8 dcam192m8cAnnexA 9 dcam256m8cAnnexB 98 unknown	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.6
cadMacChlChannelId downstream or upstream channel ID. 0 is an invalid channel Id.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.7
cadMacChlRowStatus Control object for row creation and deletion	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.8
cadMacChlIsPriCapableDs True if this is downstream channel and it is intended to be used as a primary channel by one or more cable modems. False otherwise. When a row's cadMacChlIsPrimaryCapableDs column is set to true(1) then D…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.9
cadMacChlSfProvAttrMask Provisioned attributes of this channel for purposes of channel assignment.	DOCS-IF3-MIBAttributeMaskr/w Type Values: 0 bonding 1 lowLatency 2 highAvailability	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.10
cadMacChlDirection DOCSIS downstream or upstream direction.	DOCS-IF3-MIBIfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.4.1.4998.1.1.20.1.4.3.1.11

Upstream supervison configuration table.

cadUpSupervisionCfgEntry row .1.3.6.1.4.1.4998.1.1.20.1.4.4.1

Indexes

cadMacChlMacDomainIfIndex cadUpSupervisionCfgUpChannelIfIndex cadUpSupervisionCfgDownChannelIfIndex

Column	Syntax	OID
cadUpSupervisionCfgUpChannelIfIndex ifIndex of the upstream logical channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.4.4.1.1
cadUpSupervisionCfgDownChannelIfIndex ifIndex of the downstream channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.4.4.1.2
cadUpSupervisionCfgAssign Indicates whether supervisory information for the upstream channel with cadIfUpChannelIfIndex is to be carried on the downstream channel with cadIfDownChannelIfIndex.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.1.4.4.1.3
cadUpSupervisionCfgRowStatus Control object for row creation and deletion.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.1.4.4.1.4

Upstream supervision stataus table.

cadUpSupervisionStatusEntry row .1.3.6.1.4.1.4998.1.1.20.1.4.5.1

Indexes

cadMacChlMacDomainIfIndex cadUpSupervisionStatusUpChannelIfIndex cadUpSupervisionStatusDownChannelIfIndex

Column	Syntax	OID
cadUpSupervisionStatusUpChannelIfIndex ifIndex of the upstream logical channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.4.5.1.1
cadUpSupervisionStatusDownChannelIfIndex ifIndex of the downstream channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.1.4.5.1.2
cadUpSupervisionStatusAssignmentMethod Origin of the supervisory relationship.	Enumeration Enumerated Values: 1 automatic 2 provisioned	.1.3.6.1.4.1.4998.1.1.20.1.4.5.1.3