cadDot3adAggMinLinks

CADANT-CMTS-LAYER2CMTS-MIB · .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.7
MIB view Table view

Object

column r/w Integer32 
Sets the minimum number of ports that must be able to pass 
dataplane traffic for this LAG to be in-service. If the number of 
such ports in this LAG falls below this value, the entire LAG
goes OOS.

Context

MIB
CADANT-CMTS-LAYER2CMTS-MIB
OID
.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.7
Type
column
Access
readwrite
Status
current
Parent
cadDot3adAggEntry
Table
cadDot3adAggTable
Siblings
13

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-8

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cadDot3adAggId
The unique identifier allocated to this Aggregator by the CMTS system.
columnInteger32.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.1
cadDot3adAggAdminState
The administrative state of the Link Aggregation Group.
columnCADANT-TCAdminState.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.10
cadDot3adAggPrState
The primary state of the Link Aggregation Group.
columnCADANT-TCPrimaryState.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.11
cadDot3adAggSecState
The secondary state of the Link Aggregation Group.
columnCADANT-TCSecondaryState.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.12
cadDot3adAggRowStatus
Control Object for row creation and deletion.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.13
cadDot3adAggSystemID
Equivalent to the dot3adAggActorSystemID in the dot3adAggTable. A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.14
cadDot3adAggIndex
The unique ifInex to identify this Aggregator.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.2
cadDot3adAggMacAddress
The MAC address of this Aggregator.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.3
cadDot3adAggLacpEnable
TRUE if LACP is enabled for this LAG, FALSE if it is disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.4
cadDot3adAggLacpMode
The default administrative status of the LACP protocol for ports In this LAG. Controls bit 0 of dot3adAggPortPartnerOperState to zero for passive and is set to one for active.
columnEnumeration.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.5
cadDot3adAggLacpRate
Specifies the default requested exchange rate of LACP packets for ports In this LAG. Controls bit 1 (LACP_Timeout) in dot3adAggPortActorOperState slow(1): The device requests i…
columnEnumeration.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.6
cadDot3adAggDescription
The description of the Link Aggregation Group.
columnOctetString.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.8
cadDot3adAggTrapInh
If a bit is set, the corresponding state change trap will not be sent. By default only linkUp and linkDown notifications are enabled.
columnBits.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.9