cadDot3adAggLacpRate
CADANT-CMTS-LAYER2CMTS-MIB ·
.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.6
Object
column
r/w
Enumeration
Specifies the default requested exchange rate of LACP packets for ports
In this LAG. Controls bit 1 (LACP_Timeout) in dot3adAggPortActorOperState
slow(1): The device requests its peers to send LACP packets
at a slow rate to this interface. LACP_Timeout equals 0
(transmission interval of 30 seconds, long timeout of 90 seconds)
fast(2) : The device requests its peers to send LACP packets
at fast rate to this interface. LACP_Timeout equals 1
(transmission interval of 1 second, short timeout of 3 seconds).
Context
- MIB
- CADANT-CMTS-LAYER2CMTS-MIB
- OID
.1.3.6.1.4.1.4998.1.1.20.1.1.13.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cadDot3adAggEntry
- Table
- cadDot3adAggTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | slow |
2 | fast |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadDot3adAggId The unique identifier allocated to this Aggregator by the CMTS system. | column | Integer32 | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.1 |
| cadDot3adAggAdminState The administrative state of the Link Aggregation Group. | column | CADANT-TCAdminState | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.10 |
| cadDot3adAggPrState The primary state of the Link Aggregation Group. | column | CADANT-TCPrimaryState | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.11 |
| cadDot3adAggSecState The secondary state of the Link Aggregation Group. | column | CADANT-TCSecondaryState | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.12 |
| cadDot3adAggRowStatus Control Object for row creation and deletion. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.13 |
| cadDot3adAggSystemID Equivalent to the dot3adAggActorSystemID in the dot3adAggTable.
A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.14 |
| cadDot3adAggIndex The unique ifInex to identify this Aggregator. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.2 |
| cadDot3adAggMacAddress The MAC address of this Aggregator. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.3 |
| cadDot3adAggLacpEnable TRUE if LACP is enabled for this LAG, FALSE if it is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.4 |
| cadDot3adAggLacpMode The default administrative status of the LACP protocol for ports
In this LAG. Controls bit 0 of dot3adAggPortPartnerOperState
to zero for passive and is set to one for active. | column | Enumeration | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.5 |
| cadDot3adAggMinLinks Sets the minimum number of ports that must be able to pass
dataplane traffic for this LAG to be in-service. If the number of
such ports in this LAG falls below this value, the e… | column | Integer32 | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.7 |
| cadDot3adAggDescription The description of the Link Aggregation Group. | column | OctetString | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.8 |
| cadDot3adAggTrapInh If a bit is set, the corresponding state change trap will not be sent.
By default only linkUp and linkDown notifications are enabled. | column | Bits | .1.3.6.1.4.1.4998.1.1.20.1.1.13.1.9 |