ARICENT-MEF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

185

fsMefContextTable

table

.1.3.6.1.4.1.29601.2.71.1.1 · 1 row entry · 7 columns

Open in standard view

This table contains list of per virtual context MEF module parameters.

fsMefContextEntry entry .1.3.6.1.4.1.29601.2.71.1.1.1

Each entry contains virtual context MEF module parameters.

Indexes

fsMefContextId

Column Syntax OID

fsMefContextId

This object specifies the virtual context in the system.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.1.1.1.1

fsMefContextName

This object specifies the Name of the virtual context.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.29601.2.71.1.1.1.2

fsMefTransmode

The object defines under lying transport mode
dot1ad - Provider Bridge as transport mode
mplspw - MPLS cloud as transport mode.

Enumerationr/w

Enumerated Values:

1	dot1ad
2	mplspw

.1.3.6.1.4.1.29601.2.71.1.1.1.3

fsMefFrameLossBufferClear

This object is used to remove the contents of buffer maintained for
storing frame-loss measured at various times.

Note: Get operation value should be ignored.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.1.1.1.4

fsMefFrameDelayBufferClear

This object is used to remove the contents of buffer maintained for
storing frame-delay measured at various times.

Note: Get operation value should be ignored.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.1.1.1.5

fsMefFrameLossBufferSize

This object specifies the maximum number of entries for the Frame
Loss Buffer.

Integer32r/w

Constraints:
range: 1-4096

.1.3.6.1.4.1.29601.2.71.1.1.1.6

fsMefFrameDelayBufferSize

This object specifies the maximum number of entries for the Frame
Delay Buffer.

Integer32r/w

Constraints:
range: 1-4096

.1.3.6.1.4.1.29601.2.71.1.1.1.7

fsUniTable

table

.1.3.6.1.4.1.29601.2.71.2.1 · 1 row entry · 22 columns

Open in standard view

This table contains list of the UNIs configured on the system.

fsUniEntry entry .1.3.6.1.4.1.29601.2.71.2.1.1

This entry represents UNI and its service attributes.

Indexes

IF-MIBifIndex

Column Syntax OID

fsUniId

The UNI identifier is independent of the EVCs at the UNI.
It is assigned to the UNI by the service provider. It must
be a string and the string may have any value. The UNI
identifier must be unique among all UNIs for …

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.29601.2.71.2.1.1.1

fsUniPhysicalMedium

It always return ethernetCsmacd (6).

IANAifType-MIBIANAifType

Textual Convention: IANAifType-MIBIANAifType Enumeration

Type Values:

1	other
2	regular1822
3	hdh1822
4	ddnX25
5	rfc877x25
6	ethernetCsmacd
7	iso88023Csmacd
8	iso88024TokenBus
9	iso88025TokenRing
10	iso88026Man
11	starLan
12	proteon10Mbit
13	proteon80Mbit
14	hyperchannel
15	fddi
16	lapb
17	sdlc
18	ds1
19	e1
20	basicISDN
21	primaryISDN
22	propPointToPointSerial
23	ppp
24	softwareLoopback
25	eon
26	ethernet3Mbit
27	nsip
28	slip
29	ultra
30	ds3
31	sip
32	frameRelay
33	rs232
34	para
35	arcnet
36	arcnetPlus
37	atm
38	miox25
39	sonet
40	x25ple
41	iso88022llc
42	localTalk
43	smdsDxi
44	frameRelayService
45	v35
46	hssi
47	hippi
48	modem
49	aal5
50	sonetPath
51	sonetVT
52	smdsIcip
53	propVirtual
54	propMultiplexor
55	ieee80212
56	fibreChannel
57	hippiInterface
58	frameRelayInterconnect
59	aflane8023
60	aflane8025
61	cctEmul
62	fastEther
63	isdn
64	v11
65	v36
66	g703at64k
67	g703at2mb
68	qllc
69	fastEtherFX
70	channel
71	ieee80211
72	ibm370parChan
73	escon
74	dlsw
75	isdns
76	isdnu
77	lapd
78	ipSwitch
79	rsrb
80	atmLogical
81	ds0
82	ds0Bundle
83	bsc
84	async
85	cnr
86	iso88025Dtr
87	eplrs
88	arap
89	propCnls
90	hostPad
91	termPad
92	frameRelayMPI
93	x213
94	adsl
95	radsl
96	sdsl
97	vdsl
98	iso88025CRFPInt
99	myrinet
100	voiceEM
101	voiceFXO
102	voiceFXS
103	voiceEncap
104	voiceOverIp
105	atmDxi
106	atmFuni
107	atmIma
108	pppMultilinkBundle
109	ipOverCdlc
110	ipOverClaw
111	stackToStack
112	virtualIpAddress
113	mpc
114	ipOverAtm
115	iso88025Fiber
116	tdlc
117	gigabitEthernet
118	hdlc
119	lapf
120	v37
121	x25mlp
122	x25huntGroup
123	transpHdlc
124	interleave
125	fast
126	ip
127	docsCableMaclayer
128	docsCableDownstream
129	docsCableUpstream
130	a12MppSwitch
131	tunnel
132	coffee
133	ces
134	atmSubInterface
135	l2vlan
136	l3ipvlan
137	l3ipxvlan
138	digitalPowerline
139	mediaMailOverIp
140	dtm
141	dcn
142	ipForward
143	msdsl
144	ieee1394
145	if-gsn
146	dvbRccMacLayer
147	dvbRccDownstream
148	dvbRccUpstream
149	atmVirtual
150	mplsTunnel
151	srp
152	voiceOverAtm
153	voiceOverFrameRelay
154	idsl
155	compositeLink
156	ss7SigLink
157	propWirelessP2P
158	frForward
159	rfc1483
160	usb
161	ieee8023adLag
162	bgppolicyaccounting
163	frf16MfrBundle
164	h323Gatekeeper
165	h323Proxy
166	mpls
167	mfSigLink
168	hdsl2
169	shdsl
170	ds1FDL
171	pos
172	dvbAsiIn
173	dvbAsiOut
174	plc
175	nfas
176	tr008
177	gr303RDT
178	gr303IDT
179	isup
180	propDocsWirelessMaclayer
181	propDocsWirelessDownstream
182	propDocsWirelessUpstream
183	hiperlan2
184	propBWAp2Mp
185	sonetOverheadChannel
186	digitalWrapperOverheadChannel
187	aal2
188	radioMAC
189	atmRadio
190	imt
191	mvl
192	reachDSL
193	frDlciEndPt
194	atmVciEndPt
195	opticalChannel
196	opticalTransport
197	propAtm
198	voiceOverCable
199	infiniband
200	teLink
201	q2931
202	virtualTg
203	sipTg
204	sipSig
205	docsCableUpstreamChannel
206	econet
207	pon155
208	pon622
209	bridge
210	linegroup
211	voiceEMFGD
212	voiceFGDEANA
213	voiceDID
214	mpegTransport
215	sixToFour
216	gtp
217	pdnEtherLoop1
218	pdnEtherLoop2
219	opticalChannelGroup
220	homepna
221	gfp
222	ciscoISLvlan
223	actelisMetaLOOP
224	fcipLink
225	rpr
226	qam
227	lmp
228	cblVectaStar
229	docsCableMCmtsDownstream
230	adsl2
231	macSecControlledIF
232	macSecUncontrolledIF
233	aviciOpticalEther
234	atmbond
235	voiceFGDOS
236	mocaVersion1
237	ieee80216WMAN
238	adsl2plus
239	dvbRcsMacLayer
240	dvbTdm
241	dvbRcsTdma
242	x86Laps
243	wwanPP
244	wwanPP2
245	voiceEBS
246	ifPwType
247	ilan
248	pip
249	aluELP
250	gpon
251	vdsl2
252	capwapDot11Profile
253	capwapDot11Bss
254	capwapWtpVirtualRadio
255	bits
256	docsCableUpstreamRfPort
257	cableDownstreamRfPort
258	vmwareVirtualNic
259	ieee802154
260	otnOdu
261	otnOtu
262	ifVfiType
263	g9981
264	g9982
265	g9983
266	aluEpon
267	aluEponOnu
268	aluEponPhysicalUni
269	aluEponLogicalLink
270	aluGponOnu
271	aluGponPhysicalUni
272	vmwareNicTeam
277	docsOfdmDownstream
278	docsOfdmaUpstream
279	gfast
280	sdci
281	xboxWireless
282	fastdsl
283	docsCableScte55d1FwdOob
284	docsCableScte55d1RetOob
285	docsCableScte55d2DsOob
286	docsCableScte55d2UsOob
287	docsCableNdf
288	docsCableNdr
289	ptm
290	ghn
291	otnOtsi
292	otnOtuc
293	otnOduc
294	otnOtsig
295	microwaveCarrierTermination
296	microwaveRadioLinkTerminal
297	ieee8021axDrni
298	ax25
299	ieee19061nanocom
300	cpri
301	omni
302	roe
303	p2pOverLan

.1.3.6.1.4.1.29601.2.71.2.1.1.2

fsUniSpeed

Speed is bits per second. It is dependent on the ethernet type.
The speed should be one of the give below.
- 10 Mbps
- 100 Mbps
- 10 or 100 Mbps Auto Negotiation
- 1 Gbps
- 10 Gbps.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.2.1.1.3

fsUniMode

This mode defines the type of communication between the CE and UNI.

Enumeration

Enumerated Values:

1	fullDuplex
2	halfDuplex

.1.3.6.1.4.1.29601.2.71.2.1.1.4

fsUniMacLayer

It should return IEEE 802.3 - 2005.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.29601.2.71.2.1.1.5

fsUniMtu

This object specifies the size of the largest packet which can be
sent and received on the interface, specified in octets. For
interfaces that are used for transmitting network datagrams, this
is the size of the largest…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.29601.2.71.2.1.1.6

fsUniServiceMultiplexingBundling

This object specifies the UNI service attributes.

service-Multiplexing :
This bit specifies whether the UNI supports multiple
EVCs. Point-to-Point EVCs and Multipoint-to-Multipoint
EVCs may be multiplexed…

Bitsr/w

Enumerated Values:

0	serviceMultiplexing
1	bundling
2	allToOneBundling

.1.3.6.1.4.1.29601.2.71.2.1.1.7

fsUniCVlanId

This object specifies a 12-bit UNI CE-VID to be used for untagged
frames received.

Q-BRIDGE-MIBVlanIdr/w

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.29601.2.71.2.1.1.8

fsUniMaxEvcs

This attribute defines the maximum number of EVCs that the UNI
can support. It must have at least one value.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.29601.2.71.2.1.1.9

fsUniL2CPDot1x

The object to specify whether to discard or peer or tunnel
the Dot1x packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.10

fsUniL2CPLacp

The object to specify whether to discard or peer or tunnel
the LACP packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.11

fsUniL2CPStp

The object to specify whether to discard or peer or tunnel
the STP packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.12

fsUniL2CPGvrp

The object to specify whether to discard or peer or tunnel
the GVRP packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.13

fsUniL2CPGmrp

The object to specify whether to discard or peer or tunnel
the GMRP packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.14

fsUniL2CPMvrp

The object to specify whether to discard or peer or tunnel
the MVRP packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.15

fsUniL2CPMmrp

The object to specify whether to discard or peer or tunnel
the MMRP packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.16

fsUniL2CPLldp

The object to specify whether to discard or peer or tunnel
the LLDP packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.17

fsUniL2CPElmi

The object to specify whether to discard or peer or tunnel
the ELMI packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.18

fsUniRowStatus

Row Status for the UNI table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.2.1.1.19

fsUniL2CPEcfm

The object to specify whether to discard or peer or tunnel
the ECFM packets received on this port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.20

fsUniL2CPOverrideOption

This object specifies whether override option is enabled or disabled on
the Port.
If this option is set to enable, tunnel status for all the Layer 2 control
protocol will be referred from UNI table.
If this option is …

EnabledStatusr/w

Textual Convention: EnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.29601.2.71.2.1.1.21

fsUniL2CPEoam

This object specifies whether to discard or peer or tunnel
the EOAM packets received on the port.

UniL2CPStatusr/w

Textual Convention: UniL2CPStatus Enumeration

Type Values:

1	peer
2	tunnel
3	discard

.1.3.6.1.4.1.29601.2.71.2.1.1.22

fsMefUniListTable

table

.1.3.6.1.4.1.29601.2.71.2.2 · 1 row entry · 3 columns

Open in standard view

The Uni List for an EVC is a list of pairs containing <UNI Identifier, UNI Type>
This list must have exactly one such pair for each UNI in the EVC.

fsMefUniListEntry entry .1.3.6.1.4.1.29601.2.71.2.2.1

The MEF Uni List Table entry

Indexes

fsMefContextId fsEvcIndex IF-MIBifIndex

Column Syntax OID

fsMefUniId

The UNI Identifier is independent of the EVCs at the UNI.
It is assigned to the UNI by the Service Provider. It must
be a string and the string may have any value. The UNI
identifier must be unique among all UNIs for…

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.29601.2.71.2.2.1.1

fsMefUniType

The UNI Type must have the value either Root or Leaf. If the type of EVC is
point-to-point or Multipoint-to-Multipoint, then the UNI Type must equal Root.

Enumerationr/w

Enumerated Values:

1	root
2	leaf

.1.3.6.1.4.1.29601.2.71.2.2.1.2

fsMefUniListRowStatus

Row Status for the UNI List table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.2.2.1.3

fsEvcTable

table

.1.3.6.1.4.1.29601.2.71.3.1 · 1 row entry · 13 columns

Open in standard view

This table contains list of the EVCs locally configured 
on the system.

fsEvcEntry entry .1.3.6.1.4.1.29601.2.71.3.1.1

This entry represents EVC and its attributes.

Indexes

fsEvcContextId fsEvcIndex

Column Syntax OID

fsEvcContextId

Identifies the Virtual Bridge Context.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.29601.2.71.3.1.1.1

fsEvcIndex

This object indicates service provider VLAN (S-VLAN) if value is
less than 4094. If the value is greater than 4094, this object
indicates VFI.

Q-BRIDGE-MIBVlanId

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.29601.2.71.3.1.1.2

fsEvcId

An arbitrary string, unique across the MEN, for the
EVC supporting the service instance.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.29601.2.71.3.1.1.3

fsEvcType

There are three type of EVC.

Point-to-Point :
In a Point-to-Point EVC (E-Line), exactly two UNIs must be associated
with one another.

Multipoint-to-Multipoint :
In a Multipoint-to-Multipoin…

Enumerationr/w

Enumerated Values:

1	pointtoPoint
2	multipointtoMultipoint
3	rootedMultipoint

.1.3.6.1.4.1.29601.2.71.3.1.1.4

fsEvcMaxUni

The object specifies the maximum number of UNIs (MNU) service attribute
specifies the maximum number of UNIs allowed in the UNI list service
attribute. For a Point-to-Point EVC, MNU must be two. For a Multipoint
EVC, MN…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.29601.2.71.3.1.1.5

fsEvcCVlanIdPreservation

An EVC attribute in which the CE-VLAN ID of an egress Service Frame
is identical to the CE-VLAN ID of the corresponding ingress
Service Frame. If set to true, CE-VLAN ID should be preserved.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.3.1.1.6

fsEvcCVlanCoSPreservation

In an EVC with CE-VLAN CoS Preservation set (true),
an egress Service Frame resulting from an ingress Service Frame
that contains a CE-VLAN CoS must have the identical CE-VLAN CoS.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.3.1.1.7

fsEvcRowStatus

Row Status for the UNI table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.3.1.1.8

fsEvcMtu

The size of the largest packet which can be allowed on the EVC,
specified in octets. For interfaces connected to the EVC, they
must be capable of supporting this service frame.
It should be greater than or equal to 15…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.29601.2.71.3.1.1.9

fsEvcL2CPTunnel

This object specifies the tunnel status of the protocol
configured as TUNNEL on the EVC.

FsEvcL2CPProtocolr/w

Textual Convention: FsEvcL2CPProtocol Bits

Type Values:

0	fsEvcL2CPDot1x
1	fsEvcL2CPLacp
2	fsEvcL2CPStp
3	fsEvcL2CPGvrp
4	fsEvcL2CPGmrp
5	fsEvcL2CPIgmp
6	fsEvcL2CPMvrp
7	fsEvcL2CPMmrp
8	fsEvcL2CPElmi
9	fsEvcL2CPLldp
10	fsEvcL2CPEcfm
11	fsEvcL2CPEoam
12	fsEvcL2CPPtp

.1.3.6.1.4.1.29601.2.71.3.1.1.10

fsEvcL2CPPeer

This object specifies the tunnel status of the protocol
configured as PEER on the EVC.

FsEvcL2CPProtocolr/w

Textual Convention: FsEvcL2CPProtocol Bits

Type Values:

0	fsEvcL2CPDot1x
1	fsEvcL2CPLacp
2	fsEvcL2CPStp
3	fsEvcL2CPGvrp
4	fsEvcL2CPGmrp
5	fsEvcL2CPIgmp
6	fsEvcL2CPMvrp
7	fsEvcL2CPMmrp
8	fsEvcL2CPElmi
9	fsEvcL2CPLldp
10	fsEvcL2CPEcfm
11	fsEvcL2CPEoam
12	fsEvcL2CPPtp

.1.3.6.1.4.1.29601.2.71.3.1.1.11

fsEvcL2CPDiscard

This object specifies the tunnel status of the protocol
configured as DISCARD on the EVC.

FsEvcL2CPProtocolr/w

Textual Convention: FsEvcL2CPProtocol Bits

Type Values:

0	fsEvcL2CPDot1x
1	fsEvcL2CPLacp
2	fsEvcL2CPStp
3	fsEvcL2CPGvrp
4	fsEvcL2CPGmrp
5	fsEvcL2CPIgmp
6	fsEvcL2CPMvrp
7	fsEvcL2CPMmrp
8	fsEvcL2CPElmi
9	fsEvcL2CPLldp
10	fsEvcL2CPEcfm
11	fsEvcL2CPEoam
12	fsEvcL2CPPtp

.1.3.6.1.4.1.29601.2.71.3.1.1.12

fsEvcLoopbackStatus

This object specifies the loopback status of the EVC.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.29601.2.71.3.1.1.13

fsEvcFilterTable

table

.1.3.6.1.4.1.29601.2.71.3.2 · 1 row entry · 5 columns

Open in standard view

This table contains list of the EVC's Unicast, Multicast frame
delivery conditions. Service Frame received on EVC can be discarded,
deliver unconditionally or deliver conditionally. In case of deliver
conditionally all objects are mandatory in this table. In case of
discard fsEvcFilterDestMacAddress object should not be configured.
In case of deliver unconditionally, this table is optional.

fsEvcFilterEntry entry .1.3.6.1.4.1.29601.2.71.3.2.1

This entry represents EVC's one of the frame delivery conditions.

Indexes

fsEvcContextId fsEvcIndex fsEvcFilterInstance

Column Syntax OID

fsEvcFilterInstance

If multiple conditions are mapped to the same EVC, this index is
used to uniquely identify the individual row.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.29601.2.71.3.2.1.1

fsEvcFilterDestMacAddress

This object specifies the Destination MAC address to be matched with
the service frame Destination MAC address. If service frame delivery
condition is drop, this field is not mandatory. If service fame
delivery is condi…

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.29601.2.71.3.2.1.2

fsEvcFilterAction

Specifies the action to be taken on the service frame.

Enumerationr/w

Enumerated Values:

1	allow
2	drop

.1.3.6.1.4.1.29601.2.71.3.2.1.3

fsEvcFilterId

Specifies the filter number. This filter id should be unique across the
EVCs and virtual contexts.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.29601.2.71.3.2.1.4

fsEvcFilterRowStatus

This object specifies the Row Status for the EVC filter table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.3.2.1.5

fsMefETreeTable

table

.1.3.6.1.4.1.29601.2.71.4.1 · 1 row entry · 4 columns

Open in standard view

This table is used to configure the E-Tree feature.

fsMefETreeEntry entry .1.3.6.1.4.1.29601.2.71.4.1.1

Each entry in this table gives a ingress port to egress port mapping.

Indexes

fsMefETreeIngresPort fsMefETreeEvcIndex fsMefETreeEgressPort

Column Syntax OID

fsMefETreeIngresPort

This object specifies the ingress port ifIndex.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.29601.2.71.4.1.1.1

fsMefETreeEvcIndex

This object specifies the EVC on which E-Tree service to be
configured.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.29601.2.71.4.1.1.2

fsMefETreeEgressPort

This object specifies one of the allowed egress ports for the given
ingress port identified by the first index for this row.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.29601.2.71.4.1.1.3

fsMefETreeRowStatus

This object specifies the row status for port E-Tree table entry.
Only 'CreateAndGo' and 'destroy' values are allowed for this
object. 'CreateAndWait' and 'notInService' values are not allowed.

Example:
…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.4.1.1.4

fsUniCVlanEvcTable

table

.1.3.6.1.4.1.29601.2.71.5.1 · 1 row entry · 4 columns

Open in standard view

This table contains list of the CE-VLAN ID UNI ID mapped with EVC.

fsUniCVlanEvcEntry entry .1.3.6.1.4.1.29601.2.71.5.1.1

This object specifies UNI, CE-VLAN and EVC mapping.

Indexes

IF-MIBifIndex fsUniCVlanEvcCVlanId

Column Syntax OID

fsUniCVlanEvcCVlanId

This object specifies the CE-VLAN that needs to be mapped to the EVC.

Q-BRIDGE-MIBVlanId

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.29601.2.71.5.1.1.1

fsUniCVlanEvcEvcIndex

This object represents the EVC to which the CE-VLAN at the UNI to be
mapped.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.29601.2.71.5.1.1.2

fsUniCVlanEvcRowStatus

This object specifies the row status of an entry in this table, used to
map/unmap CE-VLAN to EVC at the UNI and used to create and delete entries.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.5.1.1.3

fsUniEvcId

This is used to identify an EVC at the UNI and intended
for management and control purposes. UNI EVC ID is for
each EVC at the UNI.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.29601.2.71.5.1.1.4

fsMefFilterTable

table

.1.3.6.1.4.1.29601.2.71.6.1 · 1 row entry · 7 columns

Open in standard view

This table is used to configure filter rule used by the classifier
table.

fsMefFilterEntry entry .1.3.6.1.4.1.29601.2.71.6.1.1

This object specifies each entry in this table which is a filter
rule. Index to the table is filter number.

Indexes

fsMefFilterNo

Column Syntax OID

fsMefFilterNo

Filter rule number.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.29601.2.71.6.1.1.1

fsMefFilterDscp

This object specifies the IP DSCP value to be checked against the
packet. This object is configured when CoS ID section is based on the
DSCP. A value of '-1' means, the DSCP field becomes do not care.

Integer32r/w

Constraints:
range: -1-63

.1.3.6.1.4.1.29601.2.71.6.1.1.2

fsMefFilterDirection

This object specifies the direction of this filter to be applied. By
Default, the filter will be applied on ingress direction.
When the direction of this filter is 'in', it is applied on UNI ingress
traffic.
When the di…

Enumerationr/w

Enumerated Values:

1	in
2	out

.1.3.6.1.4.1.29601.2.71.6.1.1.3

fsMefFilterEvc

This object specifies the EVC for which the bandwidth profiles to be
configured based. This also represents the CoS identifier selection
based on the EVC.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.29601.2.71.6.1.1.4

fsMefFilterCVlanPriority

This object specifies the Customer Vlan priority present in traffic.
This object is configured when CoS ID section is based on the priority
code point field of the CE-VLAN. A value of '-1' means the CE-VLAN PCP
becomes …

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.29601.2.71.6.1.1.5

fsMefFilterIfIndex

This Object represents the UNI on which the filter should be applied.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.29601.2.71.6.1.1.6

fsMefFilterStatus

This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.6.1.1.7

fsMefClassMapTable

table

.1.3.6.1.4.1.29601.2.71.6.2 · 1 row entry · 5 columns

Open in standard view

This table contains the Multifield Classifier details. It takes input
from the table fsMefFilterTable and outputs a CLASS for the
traffic-class pattern/match.

fsMefClassMapEntry entry .1.3.6.1.4.1.29601.2.71.6.2.1

This object specifies a Multi-field Classifier entry maps
fsMefFilterTable to a CLASS.

Indexes

fsMefClassMapId

Column Syntax OID

fsMefClassMapId

An index that enumerates the MultiField Classifier table.

DIFFSERV-MIBIndexInteger

Textual Convention: DIFFSERV-MIBIndexInteger Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.29601.2.71.6.2.1.1

fsMefClassMapName

This object indicates the name for the classmap Entry.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.29601.2.71.6.2.1.2

fsMefClassMapFilterId

This Object specifies the index of the fsMefFilterTable, the details
of which should be matched against the incoming packet.

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.29601.2.71.6.2.1.3

fsMefClassMapCLASS

This represents the traffic CLASS to which an incoming frame pattern
is classified. The administrator needs to define the logical groups
that represent this CLASS. Multiple filter entries can
map to the same CLASS value…

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.29601.2.71.6.2.1.4

fsMefClassMapStatus

The status of this conceptual row. All writable objects in this
row may be modified only when the row status is not active.
CreateAndGo not allowed, it can be deleted 'destroy',
only if it is not referenced
by other tab…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.6.2.1.5

fsMefClassTable

table

.1.3.6.1.4.1.29601.2.71.6.3 · 1 row entry · 2 columns

Open in standard view

This table assigns is provided for easy mapping of CLASS policymap
and class map tables.

fsMefClassEntry entry .1.3.6.1.4.1.29601.2.71.6.3.1

This object specifies an entry that specifies CLASS used to map
policy map and class map tables.

Indexes

fsMefClassCLASS

Column Syntax OID

fsMefClassCLASS

This object specifies the traffic CLASS to which an incoming frame
pattern is classified. The administrator needs to define the traffic
class patterns that represent this CLASS. Multiple
filter entries can map to the sa…

DIFFSERV-MIBIndexInteger

Textual Convention: DIFFSERV-MIBIndexInteger Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.29601.2.71.6.3.1.1

fsMefClassStatus

The status of this conceptual row. All writable objects in this
row may be modified only when the row status is not active.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise returns inc…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.6.3.1.2

fsMefMeterTable

table

.1.3.6.1.4.1.29601.2.71.6.4 · 1 row entry · 9 columns

Open in standard view

This table enumerates specific meters that a system may use to
police a stream of traffic. This may include all traffic on an
interface.

fsMefMeterEntry entry .1.3.6.1.4.1.29601.2.71.6.4.1

An entry in the meter table describes a single conformance level
of a meter.

Indexes

fsMefMeterId

Column Syntax OID

fsMefMeterId

This object specifies an index that enumerates the meter entries.

DIFFSERV-MIBIndexInteger

Textual Convention: DIFFSERV-MIBIndexInteger Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.29601.2.71.6.4.1.1

fsMefMeterName

This object specifies the name for the meter entry.
It should be unique in this table.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.29601.2.71.6.4.1.2

fsMefMeterType

This object specifies the metering algorithm associated with the
Token Bucket meter. It supports only mefDecoupledMeter(6),
mefCoupledMeter(7) types.

ARICENT-QOS-MIBMeterTyper/w

Textual Convention: ARICENT-QOS-MIBMeterType Enumeration

Type Values:

1	simpleTokenBucket
2	avgRate
3	srTCM
4	trTCM
5	tswTCM
6	mefDecoupledMeter
7	mefCoupledMeter

.1.3.6.1.4.1.29601.2.71.6.4.1.3

fsMefMeterColorMode

The user defined Meter Color Mode.

ARICENT-QOS-MIBMeterColorModer/w

Textual Convention: ARICENT-QOS-MIBMeterColorMode Enumeration

Type Values:

1	colorAware
2	colorBlind

.1.3.6.1.4.1.29601.2.71.6.4.1.4

fsMefMeterCIR

The committed information rate as per MEF.
Must be >= 0. CIR must be less than or equal to EIR, if EIR > 0.

Unsigned32r/w

Constraints:
range: 0-10485760

.1.3.6.1.4.1.29601.2.71.6.4.1.5

fsMefMeterCBS

The committed burst size as per MEF. Must be > 0 if CIR > 0.
Maximum allowable size will be jumbo frame size.

BytesUnsigned32r/w

Constraints:
range: 0-10485760

.1.3.6.1.4.1.29601.2.71.6.4.1.6

fsMefMeterEIR

The excess information rate as per MEF.
Must be >= 0. EIR must be greater than or equal to CIR, if EIR 0.

Unsigned32r/w

Constraints:
range: 0-10485760

.1.3.6.1.4.1.29601.2.71.6.4.1.7

fsMefMeterEBS

The excess burst size as per MEF. Must be > 0 if EIR > 0.

BytesUnsigned32r/w

Constraints:
range: 0-10485760

.1.3.6.1.4.1.29601.2.71.6.4.1.8

fsMefMeterStatus

The status of this conceptual row. All writable objects in this
row may be modified only if the entry is not ACTIVE.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise returns inconsiste…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.6.4.1.9

fsMefPolicyMapTable

table

.1.3.6.1.4.1.29601.2.71.6.5 · 1 row entry · 5 columns

Open in standard view

This table contains the class-map to policy-map mapping 
details.

fsMefPolicyMapEntry entry .1.3.6.1.4.1.29601.2.71.6.5.1

An entry to map a policy for a class-map.

Indexes

fsMefPolicyMapId

Column Syntax OID

fsMefPolicyMapId

An index that enumerates the policy-map table entries.

DIFFSERV-MIBIndexInteger

Textual Convention: DIFFSERV-MIBIndexInteger Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.29601.2.71.6.5.1.1

fsMefPolicyMapName

This is the name for a policy entry. It should be unique in this table.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.29601.2.71.6.5.1.2

fsMefPolicyMapCLASS

This object specifies the traffic CLASS for which the policy-map
needs to be applied. A valid value is not necessary for
creation of an entry in this table. When this object is configured as
dont-care(0), it is mandator…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.6.5.1.3

fsMefPolicyMapMeterTableId

The object specifies a meter table Id which is the index
for the meter table. A valid value of this object is
not mandatory for the creation of an entry in this table.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.6.5.1.4

fsMefPolicyMapStatus

The status of this conceptual row.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.6.5.1.5

fsMefMepTable

table

.1.3.6.1.4.1.29601.2.71.7.1 · 1 row entry · 37 columns

Open in standard view

The Maintenance Entity Group End Point (MEP) table. The indexes of the
table fsMefContextId, fsMefMegIndex, fsMefMeIndex, fsMefMepIdentifier
points to the fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex,
fsMIY1731MepIdentifier. Entries in the table will not be created
by configuring this table. These entities have to be created explicitly
in ECFM module.

fsMefMepEntry entry .1.3.6.1.4.1.29601.2.71.7.1.1

This object specifies the MEP table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier

Column Syntax OID

fsMefMegIndex

This object specifies the MIB object dot1agCfmMdIndex of
ECFM and fsMIY1731MegIndex of Y1731.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.1

fsMefMeIndex

This object specifies the MIB object
dot1agCfmMaIndex of ECFM and fsMIY1731MeIndex of Y1731.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.2

fsMefMepIdentifier

This object specifies MIB object
dot1agCfmMepIdentifier of ECFM and fsMIY1731MepIdentifier of Y1731.

IEEE8021-CFM-MIBDot1agCfmMepId

Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepId Unsigned32

Type Constraints:
range: 1..8191

.1.3.6.1.4.1.29601.2.71.7.1.1.3

fsMefMepTransmitLmmStatus

This object specifies an enumerated value set to 'start' to initiate LM
transmission and 'stop' to stop LM transmission.
'ready' and 'notReady' indicate whether LM can be initiated or not.

Note: User can …

ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatusr/w

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatus Enumeration

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.29601.2.71.7.1.1.4

fsMefMepTransmitLmmResultOK

Indicates the result of the operation:

- true The Loss measurement Message (LMM) will be (or has been) sent.

- false The Loss measurement Message (LMM) will not be sent.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.1.1.5

fsMefMepTransmitLmmInterval

Interval between two successive LMM transmissions to be used by the MEP.

ARICENT-ECFM-Y1731-MI-MIBFsY1731LmmIntervalr/w

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731LmmInterval Enumeration

Type Values:

1	interval100ms
2	interval1s
3	interval10s
4	interval1min
5	interval10min

.1.3.6.1.4.1.29601.2.71.7.1.1.6

fsMefMepTransmitLmmDeadline

This object specifies a timeout, in seconds, before loss measurement
exits. Loss measurement exits, if configured number of messages are sent
before timeout.

Unsigned32r/w

Constraints:
range: 1-172800

.1.3.6.1.4.1.29601.2.71.7.1.1.7

fsMefMepTransmitLmmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.1.1.8

fsMefMepTransmitLmmPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.29601.2.71.7.1.1.9

fsMefMepTransmitLmmDestMacAddress

This object specifies the target MAC Address Field to be transmitted: A
unicast destination MAC address to be used for LMM.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.29601.2.71.7.1.1.10

fsMefMepTransmitLmmDestMepId

This object specifies an indication of the target MAC Address Field to be
transmitted:
The maintenance association end point identifier of
another MEP in the same maintenance association
This address will be used if the…

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.29601.2.71.7.1.1.11

fsMefMepTransmitLmmDestIsMepId

True indicates that MEPID of the target MEP is used for
LM frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Frame Loss Measurement transmission.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.1.1.12

fsMefMepTransmitLmmMessages

This object specifies the number of LMM messages to be transmitted.

Integer32r/w

Constraints:
range: 1-8192

.1.3.6.1.4.1.29601.2.71.7.1.1.13

fsMefMepTxFCf

The counter of in-profile data frames transmitted towards its
peer MEP transmitted in the last CCM or LMM.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.14

fsMefMepRxFCb

The counter of in-profile data frames received from its peer MEP at the
time of receiving the last CCM frame.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.15

fsMefMepTxFCb

The value of fsMefMepTxFCf field in the last CCM or LMR frame
received from its peer MEP.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.16

fsMefMepNearEndFrameLossThreshold

Threshold value for the near-end frame loss.
Notification is sent to Management Application if calculated near-end
frame loss exceeds configured threshold.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.17

fsMefMepFarEndFrameLossThreshold

Threshold value for the far-end frame loss.
Notification is sent to Management Application if calculated far-end
frame loss exceeds configured threshold.
This refers to Oneway Frame Loss ratio objective mentioned in se…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.18

fsMefMepTransmitDmStatus

This object specifies an enumerated value set to 'start' to initiate 1DM
or DMM transmission and 'stop' to stop 1DM or DMM transmission.
'ready' and 'notReady' indicate whether 1DM or DMM can be initiated
or not.
…

ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatusr/w

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatus Enumeration

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.29601.2.71.7.1.1.19

fsMefMepTransmitDmResultOK

Indicates the result of the operation:

- true The Delay measurement Message (1DM or DMM) will be
(or has been) sent.
- false The Delay measurement Message (1DM or DMM) will not be sent.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.1.1.20

fsMefMepTransmitDmType

Type of delay measurement to be initiated:

- oneWay(1) Measurement (by 1DM) is calculated at destination end.
- twoWay(2) Measurement (by DMM-DMR) is calculated at initiation end.

Enumerationr/w

Enumerated Values:

1	oneWay
2	twoWay

.1.3.6.1.4.1.29601.2.71.7.1.1.21

fsMefMepTransmitDmInterval

Interval between two successive DM messages
(1DM or DMM) transmissions to be used by the MEP. This refers
to the interval between frame pairs as mentioned in section 6.9.4
of MEF 10.2 standard.

Integer32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.29601.2.71.7.1.1.22

fsMefMepTransmitDmMessages

This object specifies the number of DM (1DM or DMM) messages to be
transmitted.

Integer32r/w

Constraints:
range: 1-8192

.1.3.6.1.4.1.29601.2.71.7.1.1.23

fsMefMepTransmitDmmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted DMM frame.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.1.1.24

fsMefMepTransmit1DmDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.1.1.25

fsMefMepTransmitDmmPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted DMM frame.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.29601.2.71.7.1.1.26

fsMefMepTransmit1DmPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.29601.2.71.7.1.1.27

fsMefMepTransmitDmDestMacAddress

This object specifies the target MAC address field to be transmitted: A
unicast destination MAC address to be used for 1DM or DMM.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.29601.2.71.7.1.1.28

fsMefMepTransmitDmDestMepId

This object specifies an indication of the target MAC address field to be
transmitted:
The maintenance association end point identifier of
another MEP in the same maintenance association
This address will be used if the…

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.29601.2.71.7.1.1.29

fsMefMepTransmitDmDestIsMepId

True indicates that MEPID of the target MEP is used for
Delay frame transmission.

False indicates that unicast destination MAC address of the
target MEP is used for delay frame transmission.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.1.1.30

fsMefMepTransmitDmDeadline

This object specifies a timeout, in seconds, before delay measurement
operation exits. Delay measurement operation exits, if configured number
of messages are sent before timeout.

Unsigned32r/w

Constraints:
range: 1-172800

.1.3.6.1.4.1.29601.2.71.7.1.1.31

fsMefMepDmrOptionalFields

This object specifies whether to include optional fields in the DMR
frame or not. True indicates optional fields are to be included and
False indicates optional fields are not included.
Optional fields are included to …

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.1.1.32

fsMefMep1DmRecvCapability

This object specifies the administrative status of 1DM frame reception.
This enables or disables the capability of MEP to process the 1DM frames.
A value of 'enabled' (1) indicates to accept and process 1DM frames.
A va…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.29601.2.71.7.1.1.33

fsMefMepFrameDelayThreshold

This object specifies the Threshold (in microseconds) for the frame delay.
Notification is sent to management application if calculated frame delay
exceeds configured threshold. This refers to Inter Frame Delay Variati…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.34

fsMefMepRowStatus

Indicates the status of MEP row.
This object specifies the writable columns in a row cannot be changed if
the row is active. All columns must have a valid value before a row
can be activated, possible values are row st…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.7.1.1.35

fsMefMepRxFCf

The value of fsMefMepRxFCf field is the value of in-profile data frames
received from its peer MEP.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.1.1.36

fsMefMep1DmTransInterval

This object specifies the Time interval (in 0.01 seconds) between two
successive one-way DM transactions and is used to carry out delay
variation measurement for 1DM transactions. The value '0' indicates
one-way delay v…

Integer32r/w

Constraints:
range: 0-1500

.1.3.6.1.4.1.29601.2.71.7.1.1.37

fsMefFdTable

table

.1.3.6.1.4.1.29601.2.71.7.2 · 1 row entry · 10 columns

Open in standard view

This table extends the MEP table and contains a list of
information about the frame delay measured at various times by a 
MEP.
Size of this table is defined by the object
fsMefFrameDelayBufferSize. If the addition of a frame delay entry 
would exceed the resources allocated to table, then the oldest entries 
in the table are deleted until sufficient resources are available to 
hold the new frame delay entry.
          
Delay measured can be of one-way or two-way.

fsMefFdEntry entry .1.3.6.1.4.1.29601.2.71.7.2.1

This object specifies the frame delay buffer table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier fsMefFdTransId fsMefFdSeqNumber

Column Syntax OID

fsMefFdTransId

This object specifies a delay measurement transaction.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.29601.2.71.7.2.1.1

fsMefFdSeqNumber

This object specifies the locally maintained sequence number of FD entries.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.29601.2.71.7.2.1.2

fsMefFdTxTimeStampf

TxTimeStampf value sent in a delay measurement message (DMM).
or received in 1DM frame.

ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.29601.2.71.7.2.1.3

fsMefFdMeasurementTimeStamp

Time at which measurement takes place.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.29601.2.71.7.2.1.4

fsMefFdPeerMepMacAddress

THis object specifies the Mac address of the peer MEP to which DM
message(s) is sent.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.29601.2.71.7.2.1.5

fsMefFdIfIndex

This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge port,
to which the MEP at which measurement takes place is attached.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.29601.2.71.7.2.1.6

fsMefFdDelayValue

This object contains the measured frame delay value. This refers
to one way frame delay mentioned in section 6.9.2 of MEF 10.2
standard.

ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.29601.2.71.7.2.1.7

fsMefFdIFDV

Inter frame delay variation, (IFDV), calculated with respect to
current transaction. This refers
to inter frame delay variation mentioned in section 6.9.4 of MEF 10.2
standard.

ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.29601.2.71.7.2.1.8

fsMefFdFDV

Frame delay variation, (IFDV), calculated with respect to current
transaction.

ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.29601.2.71.7.2.1.9

fsMefFdMeasurementType

This object specifies the Type of the frame-delay measurement (oneWay or
twoWay).

Enumeration

Enumerated Values:

1	oneWay
2	twoWay

.1.3.6.1.4.1.29601.2.71.7.2.1.10

fsMefFdStatsTable

table

.1.3.6.1.4.1.29601.2.71.7.3 · 1 row entry · 8 columns

Open in standard view

This table extends the MEP table and contains output of one-way and 
two-way delay measurement transaction.

fsMefFdStatsEntry entry .1.3.6.1.4.1.29601.2.71.7.3.1

This object specifies the delay statistics table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier fsMefFdTransId

Column	Syntax	OID
fsMefFdStatsTimeStamp Time stamp at which one-way or two-way delay measurement (DMM) is initiated.	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.29601.2.71.7.3.1.1`
fsMefFdStatsDmmOut Number of DMMs sent for a two-way delay measurement transaction.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.71.7.3.1.2`
fsMefFdStatsDmrIn Number of requests received for a one-way or responses received for two-way delay measurement transaction.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.71.7.3.1.3`
fsMefFdStatsDelayAverage Average delay measured for a one-way or two-way delay measurement transaction. This refers to one way mean delay of section 6.9.2 of MEF 10.2.	ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation `OctetString` Type Constraints: `range: 8`	`.1.3.6.1.4.1.29601.2.71.7.3.1.4`
fsMefFdStatsFDVAverage Frame Delay Variation (FDV) average calculated for a delay measurement transaction.	ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation `OctetString` Type Constraints: `range: 8`	`.1.3.6.1.4.1.29601.2.71.7.3.1.5`
fsMefFdStatsIFDVAverage Inter Frame Delay Variation (IFDV) average calculated for delay measurement transaction.	ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation `OctetString` Type Constraints: `range: 8`	`.1.3.6.1.4.1.29601.2.71.7.3.1.6`
fsMefFdStatsDelayMin This object contains the minimum value of frame-delay.	ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation `OctetString` Type Constraints: `range: 8`	`.1.3.6.1.4.1.29601.2.71.7.3.1.7`
fsMefFdStatsDelayMax This object contains the maximum value of frame-delay.	ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TimeRepresentation `OctetString` Type Constraints: `range: 8`	`.1.3.6.1.4.1.29601.2.71.7.3.1.8`

fsMefFlTable

table

.1.3.6.1.4.1.29601.2.71.7.4 · 1 row entry · 8 columns

Open in standard view

This table extends the MEP table and contains information about
the frame-loss measured at various times by a MEP. 
          
Size of this table is defined by the object
fsMefFrameLossBufferSize. If the addition of a frame loss entry 
would exceed the resources allocated to table, then the oldest entries 
in the table are deleted until sufficient resources are available to 
hold the new frame loss entry.

fsMefFlEntry entry .1.3.6.1.4.1.29601.2.71.7.4.1

The frame loss statistics table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier fsMefFlTransId fsMefFlSeqNumber

Column	Syntax	OID
fsMefFlTransId This object specifies a loss measurement transaction.	Unsigned32 Constraints: `range: 1-4294967295`	`.1.3.6.1.4.1.29601.2.71.7.4.1.1`
fsMefFlSeqNumber This object specifies the Locally maintained sequence number of frame loss entries	Unsigned32 Constraints: `range: 1-4294967295`	`.1.3.6.1.4.1.29601.2.71.7.4.1.2`
fsMefFlMeasurementTimeStamp This object specifies the Time at which frame-loss is actually measured.	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.29601.2.71.7.4.1.3`
fsMefFlPeerMepMacAddress This object specifies the Mac address of the peer MEP to which loss measurement message(s) is sent.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.29601.2.71.7.4.1.4`
fsMefFlIfIndex This object is the interface index of the interface which is either a bridge port, or an aggregated IEEE 802.1 link within a bridge port to which the MEP at which measurement takes place is attached.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.29601.2.71.7.4.1.5`
fsMefFlFarEndLoss This object contains the far-end frame-loss value.	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.29601.2.71.7.4.1.6`
fsMefFlNearEndLoss This object contains the near-end frame-loss value.	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.29601.2.71.7.4.1.7`
fsMefFlMeasurementTime This object specifies the Time taken to measure frame-loss.	SNMPv2-TCTimeInterval Textual Convention: SNMPv2-TCTimeInterval `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.29601.2.71.7.4.1.8`

fsMefFlStatsTable

table

.1.3.6.1.4.1.29601.2.71.7.5 · 1 row entry · 10 columns

Open in standard view

This table extends the MEP table and contains output of 
frame-loss measurement transaction.

fsMefFlStatsEntry entry .1.3.6.1.4.1.29601.2.71.7.5.1

This object specifies the frame loss statistics table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier fsMefFlTransId

Column Syntax OID

fsMefFlStatsTimeStamp

This object specifies the Time stamp at which frame-loss measurement
transaction is initiated.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.29601.2.71.7.5.1.1

fsMefFlStatsMessagesOut

This object specifies the Number of frames with ETH-LM information sent
for a transaction.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.29601.2.71.7.5.1.2

fsMefFlStatsMessagesIn

Number of frames with ETH-LM information received for a
transaction.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.5.1.3

fsMefFlStatsFarEndLossAverage

This object specifies the average of the far-end frame-loss measured for
a transaction.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.5.1.4

fsMefFlStatsNearEndLossAverage

This object specifies average of the near-end frame-loss measured for a
transaction.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.5.1.5

fsMefFlStatsMeasurementType

This object specifies the type of the frame-loss measurement
(Single-ended or Dual-ended) done.

Enumeration

Enumerated Values:

1	singleEnded
2	dualEnded

.1.3.6.1.4.1.29601.2.71.7.5.1.6

fsMefFlStatsFarEndLossMin

This object contains the minimum value of far-end frame-loss.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.5.1.7

fsMefFlStatsFarEndLossMax

This object contains the maximum value of far-end frame-loss.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.5.1.8

fsMefFlStatsNearEndLossMin

This object contains the minimum value of near-end frame-loss.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.5.1.9

fsMefFlStatsNearEndLossMax

This object contains the maximum value of near-end frame-loss.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.5.1.10

fsMefMepAvailabilityTable

table

.1.3.6.1.4.1.29601.2.71.7.6 · 1 row entry · 18 columns

Open in standard view

The Maintenance Entity Group End Point (MEP) Availability 
table.
          
Each row in the table is associated with a different MEP. 
          
This table uses three indices. The first two indices are the
indices of the Maintenance Entity Group (MEG) and Maintenance 
Entity (ME) tables, the reason being that a MEP is always 
related to an ME and MEG.
          
The MEP table stores all the managed objects for availability
measurement.
          
The objects which are used to initiate a transaction are to
be set only when the row-status of the table is active.
'fsMefMepTransmit' naming convention is used to isolate 
these objects from the others.

fsMefMepAvailabilityEntry entry .1.3.6.1.4.1.29601.2.71.7.6.1

This object specifies the MEP Availability table entry.

Indexes

fsMefContextId fsMefMegIndex fsMefMeIndex fsMefMepIdentifier

Column Syntax OID

fsMefMepAvailabilityStatus

This object specifies an enumerated value set to 'start' to initiate
Availability Measurement and 'stop' to stop availability measurement.
'ready' and 'notReady' indicates whether availability measurement
can be initiat…

ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatusr/w

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatus Enumeration

Type Values:

0	ready
1	notReady
2	start
3	stop

.1.3.6.1.4.1.29601.2.71.7.6.1.1

fsMefMepAvailabilityResultOK

Indicates the result of the operation:

- true Initiating Availability measurement by sending
LM Message (LMM) is successful.

- false Initiating Availability measurement has f…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.6.1.2

fsMefMepAvailabilityInterval

This object specifies A time interval much smaller than deadline.
Interval between two successive LMM transmissions to be used by the MEP
for calculating availability.

ARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityIntervalr/w

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityInterval Enumeration

Type Values:

1	interval100ms
2	interval1s
3	interval10s
4	interval1min
5	interval10min
6	interval30min
7	interval1hour

.1.3.6.1.4.1.29601.2.71.7.6.1.3

fsMefMepAvailabilityDeadline

This object specifies a timeout, in seconds, the time interval to
conduct the availability functionality.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.6.1.4

fsMefMepAvailabilityLowerThreshold

Availability frame loss ratio threshold, the lower threshold used
to define an interval as available. If far-end loss ratio is lesser than
configured lower threshold, that interval will be declared as available.
Availa…

OctetStringr/w

Constraints:
range: 1-6

.1.3.6.1.4.1.29601.2.71.7.6.1.5

fsMefMepAvailabilityUpperThreshold

Unavailability frame loss ratio threshold, the upper threshold to define
an interval as unavailable. If far-end loss ratio is greater than
configured upper threshold, that interval will be declared as
unavailable.
Exam…

OctetStringr/w

Constraints:
range: 1-6

.1.3.6.1.4.1.29601.2.71.7.6.1.6

fsMefMepAvailabilityModestAreaIsAvailable

Defines whether the area between upper and lower
threshold is referred as available or unavailable.

True - If Calculated Frame loss ratio falls
between upper and lower threshold,
it will…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.6.1.7

fsMefMepAvailabilityWindowSize

This object specifies the Number of consecutive small time intervals for
assessing availability.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.6.1.8

fsMefMepAvailabilityDestMacAddress

This object specifies the target MAC address field to be transmitted: A
unicast destination MAC address to be used for availability measurement.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.29601.2.71.7.6.1.9

fsMefMepAvailabilityDestMepId

This object specifies an indication of the target MAC address field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the…

IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w

Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.29601.2.71.7.6.1.10

fsMefMepAvailabilityDestIsMepId

True indicates that MEPID of the target MEP is used for
LMM transmission during availability measurement.
False indicates that unicast destination MAC address of the
target MEP is used for LMM transmission during availa…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.6.1.11

fsMefMepAvailabilityType

defStatic indicates that the algorithm for availability measurement
is static window algorithm. The availability measurement will be
conducted as per MEF 10.2
(Section 6.9.7. Availability Performance for a Point-to-Po…

ARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityTyper/w

Textual Convention: ARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityType Enumeration

Type Values:

1	defStatic
2	defSliding

.1.3.6.1.4.1.29601.2.71.7.6.1.12

fsMefMepAvailabilitySchldDownInitTime

Time when scheduled down time is initiated, denotes the beginning of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the Service Provider.
Init Time shou…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.6.1.13

fsMefMepAvailabilitySchldDownEndTime

Time when Scheduled down time is ending, denotes the ending of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the Service Provider.
End Time should be def…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.29601.2.71.7.6.1.14

fsMefMepAvailabilityPriority

Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.29601.2.71.7.6.1.15

fsMefMepAvailabilityDropEnable

Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.71.7.6.1.16

fsMefMepAvailabilityPercentage

This object contains the percentage of availability
If fsMefMepAvailabilityType is selected as defStatic,
this object contains the Availability Performance metric
as defined in MEF 10.2
(Section 6.9.7. Availability Pe…

OctetString

Constraints:
range: 1-6

.1.3.6.1.4.1.29601.2.71.7.6.1.17

fsMefMepAvailabilityRowStatus

Indicates the status of MEP Availability Table row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated, possible value…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.71.7.6.1.18

fsEvcStatsTable

table

.1.3.6.1.4.1.29601.2.71.8.1 · 1 row entry · 8 columns

Open in standard view

The table contains the statistics on a per EVC basis.
It contains number of unicast, broadcast and unknown unicast
packets/bytes transmitted/received/dropped by the EVC.

fsEvcStatsEntry entry .1.3.6.1.4.1.29601.2.71.8.1.1

The object specifies the entry that contains the EVC statistics

Indexes

fsEvcStatsContextId fsEvcStatsId

Column	Syntax	OID
fsEvcStatsContextId This object Identifies the Virtual Bridge Context.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.29601.2.71.8.1.1.1`
fsEvcStatsId This object indicates service provider VLAN (S-VLAN) if value is less than 4094. If the value is greater than 4094 this object indicates VFI	Q-BRIDGE-MIBVlanId Textual Convention: Q-BRIDGE-MIBVlanId `Integer32` Type Constraints: `range: 1..4094`	`.1.3.6.1.4.1.29601.2.71.8.1.1.2`
fsEvcStatsRxFrames This object indicates the total number of unicast, multicast and broadcast packets received in the EVC.	FramesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.71.8.1.1.3`
fsEvcStatsRxBytes This object indicates the total number of unicast, multicast and broadcast bytes received in the EVC.	BytesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.71.8.1.1.4`
fsEvcStatsTxFrames This object indicates the total number of unicast, multicast and broadcast packets transmitted by the EVC.	FramesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.71.8.1.1.5`
fsEvcStatsTxBytes This object indicates the total number of unicast, multicast and broadcast bytes transmitted by the EVC.	BytesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.71.8.1.1.6`
fsEvcStatsDiscardFrames This object indicates the number of packets dropped by the EVC.	FramesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.71.8.1.1.7`
fsEvcStatsDiscardBytes This object indicates the number of bytes dropped by the EVC.	BytesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.71.8.1.1.8`