fsMefMepAvailabilityDestIsMepId
ARICENT-MEF-MIB ·
.1.3.6.1.4.1.29601.2.71.7.6.1.11
Object
True indicates that MEPID of the target MEP is used for LMM transmission during availability measurement. False indicates that unicast destination MAC address of the target MEP is used for LMM transmission during availability measurement.
Context
- MIB
- ARICENT-MEF-MIB
- OID
.1.3.6.1.4.1.29601.2.71.7.6.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMefMepAvailabilityEntry
- Table
- fsMefMepAvailabilityTable
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMefMepAvailabilityStatus This object specifies an enumerated value set to 'start' to initiate
Availability Measurement and 'stop' to stop availability measurement.
'ready' and 'notReady' indicates whether… | column | ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatus | .1.3.6.1.4.1.29601.2.71.7.6.1.1 |
| fsMefMepAvailabilityDestMepId This object specifies an indication of the target MAC address field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Asso… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.71.7.6.1.10 |
| fsMefMepAvailabilityType defStatic indicates that the algorithm for availability measurement
is static window algorithm. The availability measurement will be
conducted as per MEF 10.2
(Section 6.9.7. Av… | column | ARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityType | .1.3.6.1.4.1.29601.2.71.7.6.1.12 |
| fsMefMepAvailabilitySchldDownInitTime Time when scheduled down time is initiated, denotes the beginning of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.6.1.13 |
| fsMefMepAvailabilitySchldDownEndTime Time when Scheduled down time is ending, denotes the ending of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.6.1.14 |
| fsMefMepAvailabilityPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.71.7.6.1.15 |
| fsMefMepAvailabilityDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.6.1.16 |
| fsMefMepAvailabilityPercentage This object contains the percentage of availability
If fsMefMepAvailabilityType is selected as defStatic,
this object contains the Availability Performance metric
as defined in M… | column | OctetString | .1.3.6.1.4.1.29601.2.71.7.6.1.17 |
| fsMefMepAvailabilityRowStatus Indicates the status of MEP Availability Table row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value befor… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.71.7.6.1.18 |
| fsMefMepAvailabilityResultOK Indicates the result of the operation:
- true Initiating Availability measurement by sending
LM Message (LMM) is successful.
- false I… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.6.1.2 |
| fsMefMepAvailabilityInterval This object specifies A time interval much smaller than deadline.
Interval between two successive LMM transmissions to be used by the MEP
for calculating availability. | column | ARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityInterval | .1.3.6.1.4.1.29601.2.71.7.6.1.3 |
| fsMefMepAvailabilityDeadline This object specifies a timeout, in seconds, the time interval to
conduct the availability functionality. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.6.1.4 |
| fsMefMepAvailabilityLowerThreshold Availability frame loss ratio threshold, the lower threshold used
to define an interval as available. If far-end loss ratio is lesser than
configured lower threshold, that interv… | column | OctetString | .1.3.6.1.4.1.29601.2.71.7.6.1.5 |
| fsMefMepAvailabilityUpperThreshold Unavailability frame loss ratio threshold, the upper threshold to define
an interval as unavailable. If far-end loss ratio is greater than
configured upper threshold, that interv… | column | OctetString | .1.3.6.1.4.1.29601.2.71.7.6.1.6 |
| fsMefMepAvailabilityModestAreaIsAvailable Defines whether the area between upper and lower
threshold is referred as available or unavailable.
True - If Calculated Frame loss ratio falls
between up… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.6.1.7 |
| fsMefMepAvailabilityWindowSize This object specifies the Number of consecutive small time intervals for
assessing availability. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.6.1.8 |
| fsMefMepAvailabilityDestMacAddress This object specifies the target MAC address field to be transmitted: A
unicast destination MAC address to be used for availability measurement. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.71.7.6.1.9 |