fsMefMepAvailabilitySchldDownInitTime

ARICENT-MEF-MIB · .1.3.6.1.4.1.29601.2.71.7.6.1.13

Object

column r/w SNMPv2-SMIUnsigned32

Time when scheduled down time is initiated, denotes the beginning of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the Service Provider.
Init Time should be defined with reference to zero and deadline.

Context

MIB: ARICENT-MEF-MIB
OID: .1.3.6.1.4.1.29601.2.71.7.6.1.13
Type: column
Access: readwrite
Status: current
Parent: fsMefMepAvailabilityEntry
Table: fsMefMepAvailabilityTable
Siblings: 17

Syntax

SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsMefMepAvailabilityStatus This object specifies an enumerated value set to 'start' to initiate Availability Measurement and 'stop' to stop availability measurement. 'ready' and 'notReady' indicates whether…	column	ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatus	`.1.3.6.1.4.1.29601.2.71.7.6.1.1`
fsMefMepAvailabilityDestMepId This object specifies an indication of the target MAC address field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Asso…	column	IEEE8021-CFM-MIBDot1agCfmMepIdOrZero	`.1.3.6.1.4.1.29601.2.71.7.6.1.10`
fsMefMepAvailabilityDestIsMepId True indicates that MEPID of the target MEP is used for LMM transmission during availability measurement. False indicates that unicast destination MAC address of the target MEP is…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.29601.2.71.7.6.1.11`
fsMefMepAvailabilityType defStatic indicates that the algorithm for availability measurement is static window algorithm. The availability measurement will be conducted as per MEF 10.2 (Section 6.9.7. Av…	column	ARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityType	`.1.3.6.1.4.1.29601.2.71.7.6.1.12`
fsMefMepAvailabilitySchldDownEndTime Time when Scheduled down time is ending, denotes the ending of time interval agreed upon by both the Subscriber and Service Provider during which a service may be disabled by the …	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.29601.2.71.7.6.1.14`
fsMefMepAvailabilityPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame.	column	Unsigned32	`.1.3.6.1.4.1.29601.2.71.7.6.1.15`
fsMefMepAvailabilityDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.29601.2.71.7.6.1.16`
fsMefMepAvailabilityPercentage This object contains the percentage of availability If fsMefMepAvailabilityType is selected as defStatic, this object contains the Availability Performance metric as defined in M…	column	OctetString	`.1.3.6.1.4.1.29601.2.71.7.6.1.17`
fsMefMepAvailabilityRowStatus Indicates the status of MEP Availability Table row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value befor…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.29601.2.71.7.6.1.18`
fsMefMepAvailabilityResultOK Indicates the result of the operation: - true Initiating Availability measurement by sending LM Message (LMM) is successful. - false I…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.29601.2.71.7.6.1.2`
fsMefMepAvailabilityInterval This object specifies A time interval much smaller than deadline. Interval between two successive LMM transmissions to be used by the MEP for calculating availability.	column	ARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityInterval	`.1.3.6.1.4.1.29601.2.71.7.6.1.3`
fsMefMepAvailabilityDeadline This object specifies a timeout, in seconds, the time interval to conduct the availability functionality.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.29601.2.71.7.6.1.4`
fsMefMepAvailabilityLowerThreshold Availability frame loss ratio threshold, the lower threshold used to define an interval as available. If far-end loss ratio is lesser than configured lower threshold, that interv…	column	OctetString	`.1.3.6.1.4.1.29601.2.71.7.6.1.5`
fsMefMepAvailabilityUpperThreshold Unavailability frame loss ratio threshold, the upper threshold to define an interval as unavailable. If far-end loss ratio is greater than configured upper threshold, that interv…	column	OctetString	`.1.3.6.1.4.1.29601.2.71.7.6.1.6`
fsMefMepAvailabilityModestAreaIsAvailable Defines whether the area between upper and lower threshold is referred as available or unavailable. True - If Calculated Frame loss ratio falls between up…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.29601.2.71.7.6.1.7`
fsMefMepAvailabilityWindowSize This object specifies the Number of consecutive small time intervals for assessing availability.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.29601.2.71.7.6.1.8`
fsMefMepAvailabilityDestMacAddress This object specifies the target MAC address field to be transmitted: A unicast destination MAC address to be used for availability measurement.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.29601.2.71.7.6.1.9`