fsUniL2CPEoam
ARICENT-MEF-MIB ·
.1.3.6.1.4.1.29601.2.71.2.1.1.22
Object
column
r/w
UniL2CPStatus
This object specifies whether to discard or peer or tunnel the EOAM packets received on the port.
Context
- MIB
- ARICENT-MEF-MIB
- OID
.1.3.6.1.4.1.29601.2.71.2.1.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsUniEntry
- Table
- fsUniTable
- Siblings
- 21
Syntax
UniL2CPStatus
- Source
- UniL2CPStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | peer |
2 | tunnel |
3 | discard |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsUniId The UNI identifier is independent of the EVCs at the UNI.
It is assigned to the UNI by the service provider. It must
be a string and the string may have any value. The UNI
ident… | column | OctetString | .1.3.6.1.4.1.29601.2.71.2.1.1.1 |
| fsUniL2CPDot1x The object to specify whether to discard or peer or tunnel
the Dot1x packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.10 |
| fsUniL2CPLacp The object to specify whether to discard or peer or tunnel
the LACP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.11 |
| fsUniL2CPStp The object to specify whether to discard or peer or tunnel
the STP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.12 |
| fsUniL2CPGvrp The object to specify whether to discard or peer or tunnel
the GVRP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.13 |
| fsUniL2CPGmrp The object to specify whether to discard or peer or tunnel
the GMRP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.14 |
| fsUniL2CPMvrp The object to specify whether to discard or peer or tunnel
the MVRP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.15 |
| fsUniL2CPMmrp The object to specify whether to discard or peer or tunnel
the MMRP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.16 |
| fsUniL2CPLldp The object to specify whether to discard or peer or tunnel
the LLDP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.17 |
| fsUniL2CPElmi The object to specify whether to discard or peer or tunnel
the ELMI packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.18 |
| fsUniRowStatus Row Status for the UNI table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.19 |
| fsUniPhysicalMedium It always return ethernetCsmacd (6). | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.29601.2.71.2.1.1.2 |
| fsUniL2CPEcfm The object to specify whether to discard or peer or tunnel
the ECFM packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.20 |
| fsUniL2CPOverrideOption This object specifies whether override option is enabled or disabled on
the Port.
If this option is set to enable, tunnel status for all the Layer 2 control
protocol will be ref… | column | EnabledStatus | .1.3.6.1.4.1.29601.2.71.2.1.1.21 |
| fsUniSpeed Speed is bits per second. It is dependent on the ethernet type.
The speed should be one of the give below.
- 10 Mbps
- 100 Mbps
- 10 or 100 Mbps Auto Negotiation
- 1 Gbps
- 10 Gb… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.29601.2.71.2.1.1.3 |
| fsUniMode This mode defines the type of communication between the CE and UNI. | column | Enumeration | .1.3.6.1.4.1.29601.2.71.2.1.1.4 |
| fsUniMacLayer It should return IEEE 802.3 - 2005. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.29601.2.71.2.1.1.5 |
| fsUniMtu This object specifies the size of the largest packet which can be
sent and received on the interface, specified in octets. For
interfaces that are used for transmitting network da… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.71.2.1.1.6 |
| fsUniServiceMultiplexingBundling This object specifies the UNI service attributes.
service-Multiplexing :
This bit specifies whether the UNI supports multiple
EVCs. Point-to-Point EVCs and Multipoi… | column | Bits | .1.3.6.1.4.1.29601.2.71.2.1.1.7 |
| fsUniCVlanId This object specifies a 12-bit UNI CE-VID to be used for untagged
frames received. | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.29601.2.71.2.1.1.8 |
| fsUniMaxEvcs This attribute defines the maximum number of EVCs that the UNI
can support. It must have at least one value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.29601.2.71.2.1.1.9 |