fsMefMepTransmitDmResultOK
ARICENT-MEF-MIB ·
.1.3.6.1.4.1.29601.2.71.7.1.1.20
Object
column
SNMPv2-TCTruthValue
Indicates the result of the operation:
- true The Delay measurement Message (1DM or DMM) will be
(or has been) sent.
- false The Delay measurement Message (1DM or DMM) will not be sent.
Context
- MIB
- ARICENT-MEF-MIB
- OID
.1.3.6.1.4.1.29601.2.71.7.1.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMefMepEntry
- Table
- fsMefMepTable
- Siblings
- 36
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMefMegIndex This object specifies the MIB object dot1agCfmMdIndex of
ECFM and fsMIY1731MegIndex of Y1731. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.1 |
| fsMefMepTransmitLmmDestMacAddress This object specifies the target MAC Address Field to be transmitted: A
unicast destination MAC address to be used for LMM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.71.7.1.1.10 |
| fsMefMepTransmitLmmDestMepId This object specifies an indication of the target MAC Address Field to be
transmitted:
The maintenance association end point identifier of
another MEP in the same maintenance asso… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.71.7.1.1.11 |
| fsMefMepTransmitLmmDestIsMepId True indicates that MEPID of the target MEP is used for
LM frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Frame Loss Measur… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.1.1.12 |
| fsMefMepTransmitLmmMessages This object specifies the number of LMM messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.29601.2.71.7.1.1.13 |
| fsMefMepTxFCf The counter of in-profile data frames transmitted towards its
peer MEP transmitted in the last CCM or LMM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.14 |
| fsMefMepRxFCb The counter of in-profile data frames received from its peer MEP at the
time of receiving the last CCM frame. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.15 |
| fsMefMepTxFCb The value of fsMefMepTxFCf field in the last CCM or LMR frame
received from its peer MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.16 |
| fsMefMepNearEndFrameLossThreshold Threshold value for the near-end frame loss.
Notification is sent to Management Application if calculated near-end
frame loss exceeds configured threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.17 |
| fsMefMepFarEndFrameLossThreshold Threshold value for the far-end frame loss.
Notification is sent to Management Application if calculated far-end
frame loss exceeds configured threshold.
This refers to Oneway Fr… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.18 |
| fsMefMepTransmitDmStatus This object specifies an enumerated value set to 'start' to initiate 1DM
or DMM transmission and 'stop' to stop 1DM or DMM transmission.
'ready' and 'notReady' indicate whether 1D… | column | ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatus | .1.3.6.1.4.1.29601.2.71.7.1.1.19 |
| fsMefMeIndex This object specifies the MIB object
dot1agCfmMaIndex of ECFM and fsMIY1731MeIndex of Y1731. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.2 |
| fsMefMepTransmitDmType Type of delay measurement to be initiated:
- oneWay(1) Measurement (by 1DM) is calculated at destination end.
- twoWay(2) Measurement (by DMM-DMR) is calculated… | column | Enumeration | .1.3.6.1.4.1.29601.2.71.7.1.1.21 |
| fsMefMepTransmitDmInterval Interval between two successive DM messages
(1DM or DMM) transmissions to be used by the MEP. This refers
to the interval between frame pairs as mentioned in section 6.9.4
of MEF… | column | Integer32 | .1.3.6.1.4.1.29601.2.71.7.1.1.22 |
| fsMefMepTransmitDmMessages This object specifies the number of DM (1DM or DMM) messages to be
transmitted. | column | Integer32 | .1.3.6.1.4.1.29601.2.71.7.1.1.23 |
| fsMefMepTransmitDmmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted DMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.1.1.24 |
| fsMefMepTransmit1DmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.1.1.25 |
| fsMefMepTransmitDmmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted DMM frame. | column | Integer32 | .1.3.6.1.4.1.29601.2.71.7.1.1.26 |
| fsMefMepTransmit1DmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted 1DM frame. | column | Integer32 | .1.3.6.1.4.1.29601.2.71.7.1.1.27 |
| fsMefMepTransmitDmDestMacAddress This object specifies the target MAC address field to be transmitted: A
unicast destination MAC address to be used for 1DM or DMM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.29601.2.71.7.1.1.28 |
| fsMefMepTransmitDmDestMepId This object specifies an indication of the target MAC address field to be
transmitted:
The maintenance association end point identifier of
another MEP in the same maintenance asso… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.29601.2.71.7.1.1.29 |
| fsMefMepIdentifier This object specifies MIB object
dot1agCfmMepIdentifier of ECFM and fsMIY1731MepIdentifier of Y1731. | column | IEEE8021-CFM-MIBDot1agCfmMepId | .1.3.6.1.4.1.29601.2.71.7.1.1.3 |
| fsMefMepTransmitDmDestIsMepId True indicates that MEPID of the target MEP is used for
Delay frame transmission.
False indicates that unicast destination MAC address of the
target MEP is used for… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.1.1.30 |
| fsMefMepTransmitDmDeadline This object specifies a timeout, in seconds, before delay measurement
operation exits. Delay measurement operation exits, if configured number
of messages are sent before timeout. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.31 |
| fsMefMepDmrOptionalFields This object specifies whether to include optional fields in the DMR
frame or not. True indicates optional fields are to be included and
False indicates optional fields are not in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.1.1.32 |
| fsMefMep1DmRecvCapability This object specifies the administrative status of 1DM frame reception.
This enables or disables the capability of MEP to process the 1DM frames.
A value of 'enabled' (1) indicate… | column | Enumeration | .1.3.6.1.4.1.29601.2.71.7.1.1.33 |
| fsMefMepFrameDelayThreshold This object specifies the Threshold (in microseconds) for the frame delay.
Notification is sent to management application if calculated frame delay
exceeds configured threshold. … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.34 |
| fsMefMepRowStatus Indicates the status of MEP row.
This object specifies the writable columns in a row cannot be changed if
the row is active. All columns must have a valid value before a row
can … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.29601.2.71.7.1.1.35 |
| fsMefMepRxFCf The value of fsMefMepRxFCf field is the value of in-profile data frames
received from its peer MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.36 |
| fsMefMep1DmTransInterval This object specifies the Time interval (in 0.01 seconds) between two
successive one-way DM transactions and is used to carry out delay
variation measurement for 1DM transactions.… | column | Integer32 | .1.3.6.1.4.1.29601.2.71.7.1.1.37 |
| fsMefMepTransmitLmmStatus This object specifies an enumerated value set to 'start' to initiate LM
transmission and 'stop' to stop LM transmission.
'ready' and 'notReady' indicate whether LM can be initiate… | column | ARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatus | .1.3.6.1.4.1.29601.2.71.7.1.1.4 |
| fsMefMepTransmitLmmResultOK Indicates the result of the operation:
- true The Loss measurement Message (LMM) will be (or has been) sent.
- false The Loss measurement Messag… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.1.1.5 |
| fsMefMepTransmitLmmInterval Interval between two successive LMM transmissions to be used by the MEP. | column | ARICENT-ECFM-Y1731-MI-MIBFsY1731LmmInterval | .1.3.6.1.4.1.29601.2.71.7.1.1.6 |
| fsMefMepTransmitLmmDeadline This object specifies a timeout, in seconds, before loss measurement
exits. Loss measurement exits, if configured number of messages are sent
before timeout. | column | Unsigned32 | .1.3.6.1.4.1.29601.2.71.7.1.1.7 |
| fsMefMepTransmitLmmDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.29601.2.71.7.1.1.8 |
| fsMefMepTransmitLmmPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | Integer32 | .1.3.6.1.4.1.29601.2.71.7.1.1.9 |