fsUniId

ARICENT-MEF-MIB · .1.3.6.1.4.1.29601.2.71.2.1.1.1
MIB view Table view

Object

column r/w OctetString 
The UNI identifier is independent of the EVCs at the UNI. 
It is assigned to the UNI by the service provider. It must
be a string and the string may have any value. The UNI 
identifier must be unique among all UNIs for the MEN.
              
If the UNI identifier value is not specified for the UNI or it
is unknown, the value of the fsUniId column is a
zero-length string.

Context

MIB
ARICENT-MEF-MIB
OID
.1.3.6.1.4.1.29601.2.71.2.1.1.1
Type
column
Access
readwrite
Status
current
Parent
fsUniEntry
Table
fsUniTable
Siblings
21

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-32

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsUniL2CPDot1x
The object to specify whether to discard or peer or tunnel the Dot1x packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.10
fsUniL2CPLacp
The object to specify whether to discard or peer or tunnel the LACP packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.11
fsUniL2CPStp
The object to specify whether to discard or peer or tunnel the STP packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.12
fsUniL2CPGvrp
The object to specify whether to discard or peer or tunnel the GVRP packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.13
fsUniL2CPGmrp
The object to specify whether to discard or peer or tunnel the GMRP packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.14
fsUniL2CPMvrp
The object to specify whether to discard or peer or tunnel the MVRP packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.15
fsUniL2CPMmrp
The object to specify whether to discard or peer or tunnel the MMRP packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.16
fsUniL2CPLldp
The object to specify whether to discard or peer or tunnel the LLDP packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.17
fsUniL2CPElmi
The object to specify whether to discard or peer or tunnel the ELMI packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.18
fsUniRowStatus
Row Status for the UNI table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.29601.2.71.2.1.1.19
fsUniPhysicalMedium
It always return ethernetCsmacd (6).
columnIANAifType-MIBIANAifType.1.3.6.1.4.1.29601.2.71.2.1.1.2
fsUniL2CPEcfm
The object to specify whether to discard or peer or tunnel the ECFM packets received on this port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.20
fsUniL2CPOverrideOption
This object specifies whether override option is enabled or disabled on the Port. If this option is set to enable, tunnel status for all the Layer 2 control protocol will be ref…
columnEnabledStatus.1.3.6.1.4.1.29601.2.71.2.1.1.21
fsUniL2CPEoam
This object specifies whether to discard or peer or tunnel the EOAM packets received on the port.
columnUniL2CPStatus.1.3.6.1.4.1.29601.2.71.2.1.1.22
fsUniSpeed
Speed is bits per second. It is dependent on the ethernet type. The speed should be one of the give below. - 10 Mbps - 100 Mbps - 10 or 100 Mbps Auto Negotiation - 1 Gbps - 10 Gb…
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.29601.2.71.2.1.1.3
fsUniMode
This mode defines the type of communication between the CE and UNI.
columnEnumeration.1.3.6.1.4.1.29601.2.71.2.1.1.4
fsUniMacLayer
It should return IEEE 802.3 - 2005.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.29601.2.71.2.1.1.5
fsUniMtu
This object specifies the size of the largest packet which can be sent and received on the interface, specified in octets. For interfaces that are used for transmitting network da…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.29601.2.71.2.1.1.6
fsUniServiceMultiplexingBundling
This object specifies the UNI service attributes. service-Multiplexing : This bit specifies whether the UNI supports multiple EVCs. Point-to-Point EVCs and Multipoi…
columnBits.1.3.6.1.4.1.29601.2.71.2.1.1.7
fsUniCVlanId
This object specifies a 12-bit UNI CE-VID to be used for untagged frames received.
columnQ-BRIDGE-MIBVlanId.1.3.6.1.4.1.29601.2.71.2.1.1.8
fsUniMaxEvcs
This attribute defines the maximum number of EVCs that the UNI can support. It must have at least one value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.29601.2.71.2.1.1.9