fsMefMepAvailabilityModestAreaIsAvailable

ARICENT-MEF-MIB · .1.3.6.1.4.1.29601.2.71.7.6.1.7
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
Defines whether the area between upper and lower 
threshold is referred as available or unavailable.
              
True -  If Calculated Frame loss ratio falls 
       between upper and lower threshold, 
       it will be declared as Available.
              
False - If Calculated Frame loss ratio falls 
       between upper and lower threshold, 
       it will be declared as Unavailable.

Context

MIB
ARICENT-MEF-MIB
OID
.1.3.6.1.4.1.29601.2.71.7.6.1.7
Type
column
Access
readwrite
Status
current
Parent
fsMefMepAvailabilityEntry
Table
fsMefMepAvailabilityTable
Siblings
17

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMefMepAvailabilityStatus
This object specifies an enumerated value set to 'start' to initiate Availability Measurement and 'stop' to stop availability measurement. 'ready' and 'notReady' indicates whether…
columnARICENT-ECFM-Y1731-MI-MIBFsY1731TransmitStatus.1.3.6.1.4.1.29601.2.71.7.6.1.1
fsMefMepAvailabilityDestMepId
This object specifies an indication of the target MAC address field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Asso…
columnIEEE8021-CFM-MIBDot1agCfmMepIdOrZero.1.3.6.1.4.1.29601.2.71.7.6.1.10
fsMefMepAvailabilityDestIsMepId
True indicates that MEPID of the target MEP is used for LMM transmission during availability measurement. False indicates that unicast destination MAC address of the target MEP is…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.29601.2.71.7.6.1.11
fsMefMepAvailabilityType
defStatic indicates that the algorithm for availability measurement is static window algorithm. The availability measurement will be conducted as per MEF 10.2 (Section 6.9.7. Av…
columnARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityType.1.3.6.1.4.1.29601.2.71.7.6.1.12
fsMefMepAvailabilitySchldDownInitTime
Time when scheduled down time is initiated, denotes the beginning of time interval agreed upon by both the Subscriber and Service Provider during which a service may be disabled…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.71.7.6.1.13
fsMefMepAvailabilitySchldDownEndTime
Time when Scheduled down time is ending, denotes the ending of time interval agreed upon by both the Subscriber and Service Provider during which a service may be disabled by the …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.71.7.6.1.14
fsMefMepAvailabilityPriority
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame.
columnUnsigned32.1.3.6.1.4.1.29601.2.71.7.6.1.15
fsMefMepAvailabilityDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.29601.2.71.7.6.1.16
fsMefMepAvailabilityPercentage
This object contains the percentage of availability If fsMefMepAvailabilityType is selected as defStatic, this object contains the Availability Performance metric as defined in M…
columnOctetString.1.3.6.1.4.1.29601.2.71.7.6.1.17
fsMefMepAvailabilityRowStatus
Indicates the status of MEP Availability Table row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value befor…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.29601.2.71.7.6.1.18
fsMefMepAvailabilityResultOK
Indicates the result of the operation: - true Initiating Availability measurement by sending LM Message (LMM) is successful. - false I…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.29601.2.71.7.6.1.2
fsMefMepAvailabilityInterval
This object specifies A time interval much smaller than deadline. Interval between two successive LMM transmissions to be used by the MEP for calculating availability.
columnARICENT-ECFM-Y1731-MI-MIBFsY1731AvailabilityInterval.1.3.6.1.4.1.29601.2.71.7.6.1.3
fsMefMepAvailabilityDeadline
This object specifies a timeout, in seconds, the time interval to conduct the availability functionality.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.71.7.6.1.4
fsMefMepAvailabilityLowerThreshold
Availability frame loss ratio threshold, the lower threshold used to define an interval as available. If far-end loss ratio is lesser than configured lower threshold, that interv…
columnOctetString.1.3.6.1.4.1.29601.2.71.7.6.1.5
fsMefMepAvailabilityUpperThreshold
Unavailability frame loss ratio threshold, the upper threshold to define an interval as unavailable. If far-end loss ratio is greater than configured upper threshold, that interv…
columnOctetString.1.3.6.1.4.1.29601.2.71.7.6.1.6
fsMefMepAvailabilityWindowSize
This object specifies the Number of consecutive small time intervals for assessing availability.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.29601.2.71.7.6.1.8
fsMefMepAvailabilityDestMacAddress
This object specifies the target MAC address field to be transmitted: A unicast destination MAC address to be used for availability measurement.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.29601.2.71.7.6.1.9