This trap is sent every time an entity is created.
alarmRemoved
.1.3.6.1.4.1.2544.1.11.7.5.0.10
ent has been removed / unplugged / disconnected.
This condition has been determined to be more probable than that below,
which is also supersedes.
alarmLossOfCharSync
.1.3.6.1.4.1.2544.1.11.7.5.0.100
Unable to syncronise on the characters in the incoming datastream
fspR7EquipmentInsertedTrap
.1.3.6.1.4.1.2544.1.11.7.5.0.10001
This trap is sent when an equipment is inserted.
fspR7EquipmentRemovedTrap
.1.3.6.1.4.1.2544.1.11.7.5.0.10002
This trap is sent when an equipment is inserted.
fspR7WriteAccessRequest
.1.3.6.1.4.1.2544.1.11.7.5.0.10010
fspR7WriteAccessGranted
.1.3.6.1.4.1.2544.1.11.7.5.0.10011
fspR7WriteAccessRevoked
.1.3.6.1.4.1.2544.1.11.7.5.0.10012
fspR7WriteAccessDenied
.1.3.6.1.4.1.2544.1.11.7.5.0.10013
fspR7WriteAccessTimeout
.1.3.6.1.4.1.2544.1.11.7.5.0.10014
fspR7WriteAccessRequestTimeout
.1.3.6.1.4.1.2544.1.11.7.5.0.10015
alarmLossOfCharSyncFromFarEnd
.1.3.6.1.4.1.2544.1.11.7.5.0.101
Loss of Character Synchronization from FEND
transientCryptoAuthPasswdInvalid
.1.3.6.1.4.1.2544.1.11.7.5.0.102
A wrong Authentication password was sent with the command
alarmEncryptionPortEncryptionSwitchOffEnabled
.1.3.6.1.4.1.2544.1.11.7.5.0.103
User enabled switching encryption off
alarmEncryptionModuleCryPasswdMissing
.1.3.6.1.4.1.2544.1.11.7.5.0.104
Crypto Officer password missing
transientCryptoPasswdChanged
.1.3.6.1.4.1.2544.1.11.7.5.0.105
Crypto Officer Password Changed
transientCryptoRtf
.1.3.6.1.4.1.2544.1.11.7.5.0.106
Encryption settings reset to factory defaults
alarmEncryptionModuleSelfTestStarted
.1.3.6.1.4.1.2544.1.11.7.5.0.107
Encryption selftest running
alarmEncryptionPortEncryptionSwitchedOff
.1.3.6.1.4.1.2544.1.11.7.5.0.108
Encryption switched off
alarmOpuClientSignalFail
.1.3.6.1.4.1.2544.1.11.7.5.0.109
OPU Client Signal Fail
alarmLossOfSignal
.1.3.6.1.4.1.2544.1.11.7.5.0.11
Loss of Signal
alarmDatabaseMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.110
compare DBACT__FAIL x.y.z in UBR note DBTYPE is retrievable immediately with RTRV-SYS, we do not currently supported a RTRV-COND-SYS
alarmDatabaseFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.111
Database Failure detect by Database Check Routine
alarmDatabaseNcuMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.112
This parameter indicates a change of NCU Type (NCU<->NCU2E)
alarmDbReplicationIncompleted
.1.3.6.1.4.1.2544.1.11.7.5.0.113
DB Replication Incomplete
alarmDatabaseVersionMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.114
The current DB is newer than required, or not updateable
alarmXfpDecisionThresSetFailed
.1.3.6.1.4.1.2544.1.11.7.5.0.115
Decision threshold setting failed
alarmDuplexLinkFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.116
Controller Protection Link Failure
transientFarEndDyingGasp
.1.3.6.1.4.1.2544.1.11.7.5.0.117
signal received from far end upon far end power loss
alarmSingleFanFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.118
Fan operation is degraded and needs attention (cleaning, filter replacement or possible fan replacement).
alarmMultipleFanFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.119
Fan is failing or failed and needs replacement.
alarmOptInputPwrReceivedTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.12
Optical Power Rx too Low
alarmLossOfSignalTransmitter
.1.3.6.1.4.1.2544.1.11.7.5.0.120
A Loss of signal has been detected on the FAR-END facility.
transientFarEndChanged
.1.3.6.1.4.1.2544.1.11.7.5.0.121
Neighbor Discovery Dectected a Far End Change
alarmFarEndIpAddressUnknown
.1.3.6.1.4.1.2544.1.11.7.5.0.122
Send by active facility. If an FEND IP Address is changed the corresponding NODE-IP cannot be determined by the OSCM
alarmFarEndCommFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.123
The connection to the Far End Optojack plug is dysfunctional
transientTopologyDataInvalid
.1.3.6.1.4.1.2544.1.11.7.5.0.124
Topology Detection Data invalid
alarmBackupForcedToHalt
.1.3.6.1.4.1.2544.1.11.7.5.0.125
Forced Halt
transientForcedReboot
.1.3.6.1.4.1.2544.1.11.7.5.0.126
Forced Reboot
alarmFacilityForcedOn
.1.3.6.1.4.1.2544.1.11.7.5.0.127
Laser or Switch forced ON
alarmFwdAseTableFailPilot
.1.3.6.1.4.1.2544.1.11.7.5.0.128
Force of BWD Raman pilot for FWD ASE Table Build Failed
alarmFwdAseTableOnPilot
.1.3.6.1.4.1.2544.1.11.7.5.0.129
Force the BWD Raman Pilot on to allow building of FWD Raman ASE Table
alarmOptInputPwrReceivedTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.13
Optical Power Rx too High
transientCryptoFwpUpdate
.1.3.6.1.4.1.2544.1.11.7.5.0.130
A new FWP is installed
alarmEncryptionModuleFwpUpdateEnabled
.1.3.6.1.4.1.2544.1.11.7.5.0.131
FWP upgrade is allowed
alarmFwpMismatchDownloadNotServiceAffecting
.1.3.6.1.4.1.2544.1.11.7.5.0.132
Firmware Package Mismatch; download will be NOT Service Affecting
alarmFwpMismatchDownloadServiceAffecting
.1.3.6.1.4.1.2544.1.11.7.5.0.133
Firmware Package Mismatch; download will be Service Affecting
transientCryptoFwpRevChanged
.1.3.6.1.4.1.2544.1.11.7.5.0.134
FWP upgrade revision number is changed
alarmGainTiltNotSettable
.1.3.6.1.4.1.2544.1.11.7.5.0.135
The nominal tilt and gain values are not settable
alarmHighBer
.1.3.6.1.4.1.2544.1.11.7.5.0.136
More than 16 invalid 64B/66B sync headers within the current 125us period
alarmReceiverOverloadProtection
.1.3.6.1.4.1.2544.1.11.7.5.0.137
Safety condition, protecting the system against too high receive power.
alarmHwInitializing
.1.3.6.1.4.1.2544.1.11.7.5.0.138
Hardware is Initializing
alarmHwOprReachedHT
.1.3.6.1.4.1.2544.1.11.7.5.0.139
HW OPR has reached a high thershold and could be damaged
alarmLaserTemperatureTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.14
TCA - Fixed high threshold of Laser Temperature has been crossed.
alarmHwDegrade
.1.3.6.1.4.1.2544.1.11.7.5.0.140
HW operation is degraded by a HW fault, but traffic is unaffected.
alarmHwFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.141
General Hardware Failure
alarmSwitchtoProtectionInhibited
.1.3.6.1.4.1.2544.1.11.7.5.0.142
Protection Switch Inhibited. Switch to PROTN facility Locked Out. Reported by WKG facility. Leads to PSI state.
alarmSwitchtoWorkingInhibited
.1.3.6.1.4.1.2544.1.11.7.5.0.143
Protection Release Inhibited. Switch back to WKG facility Locked Out. Reported by PROTN facility. Leads to PRI state.
transientIntrusionRx
.1.3.6.1.4.1.2544.1.11.7.5.0.144
Intrusion on the Receiver Fiber based on GRADHT-AT keyword.
transientIntrusionTx
.1.3.6.1.4.1.2544.1.11.7.5.0.145
Intrusion on the Receiver Fiber based on GRADHT-AT keyword.
transientEncryptionPortSingleKeyExchgFailed
.1.3.6.1.4.1.2544.1.11.7.5.0.146
At least one Key exchange failed
transientCryptoKeyExchgFailCondClr
.1.3.6.1.4.1.2544.1.11.7.5.0.147
Key exchange fail counter reset
alarmEncryptionPortKeyInitExchgMissed
.1.3.6.1.4.1.2544.1.11.7.5.0.148
The initial successful key exchange has not be completed
alarmEncryptionPortMaxKeyExchgFailuresReachedIs
.1.3.6.1.4.1.2544.1.11.7.5.0.149
Maximum Key exchange failure count reached
alarmLaserTemperatureTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.15
TCA - Fixed low threshold of Laser Temperature has been crossed.
alarmEncryptionPortMaxKeyExchgFailuresReachedOos
.1.3.6.1.4.1.2544.1.11.7.5.0.150
Session Key missing
alarmEncryptionPortKeyExchangedForced
.1.3.6.1.4.1.2544.1.11.7.5.0.151
Encryption Key exchanged forced
alarmLaserOnDelay
.1.3.6.1.4.1.2544.1.11.7.5.0.152
Laser in process of turning on
alarmLockedDefectOdu
.1.3.6.1.4.1.2544.1.11.7.5.0.153
ODU Locked
alarmLockedDefectOduTcmA
.1.3.6.1.4.1.2544.1.11.7.5.0.154
Locked Defect ODU TCM Instance A
alarmLockedDefectOduTcmB
.1.3.6.1.4.1.2544.1.11.7.5.0.155
Locked Defect ODU TCM Instance B
alarmLockedDefectOduTcmC
.1.3.6.1.4.1.2544.1.11.7.5.0.156
Locked Defect ODU TCM Instance C
alarmLinkControlProtocolFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.157
Link Control Protocol setup error or timeout
alarmLinkDown
.1.3.6.1.4.1.2544.1.11.7.5.0.158
Failure of External Linkage
alarmAutoShutdownSendingAisLine
.1.3.6.1.4.1.2544.1.11.7.5.0.159
Auto Shutdown (L-AIS)
alarmOptOutputPowerTransTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.16
TCA - Optical Power Transmitted (output) too low
alarmAutoShutdownSendingAisOdu
.1.3.6.1.4.1.2544.1.11.7.5.0.160
Auto Shutdown (ODU-AIS)
alarmAutoShutdownSendingAisOpu
.1.3.6.1.4.1.2544.1.11.7.5.0.161
Auto Shutdown (OPU-AIS)
alarmClientFailForwarding
.1.3.6.1.4.1.2544.1.11.7.5.0.162
Forwarding of Client Failure
alarmAutoShutdownAls
.1.3.6.1.4.1.2544.1.11.7.5.0.163
Auto Shutdown (ALS)
alarmAutoAmpShutdown
.1.3.6.1.4.1.2544.1.11.7.5.0.164
Amplifier Auto Shutdown
alarmAutoShutdownAmpAps
.1.3.6.1.4.1.2544.1.11.7.5.0.165
Auto Shutdown on Network Tx fiber due to LOS on Network Rx fiber (AMP-APS enabled)
alarmAseTableBuild
.1.3.6.1.4.1.2544.1.11.7.5.0.166
Auto shutdown due to missing ASE table
alarmAutoShutdownOpuClientSignalFail
.1.3.6.1.4.1.2544.1.11.7.5.0.167
Automatic Shutdown - Client Signal Fail transmit (LKDO-CSF)
alarmAutoShutdownSendingEPC
.1.3.6.1.4.1.2544.1.11.7.5.0.168
Auto Shutdown (EPC)
alarmAutoShutdownSendingLckOdu
.1.3.6.1.4.1.2544.1.11.7.5.0.169
Auto Shutdown (ODU-LCK)
alarmOptOutputPowerTransTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.17
TCA - Optical Power Transmitted (output) too high
alarmAutoShutdownSendingOciOdu
.1.3.6.1.4.1.2544.1.11.7.5.0.170
Auto Shutdown (ODU-OCI)
alarmAutoShutdownLaserOffDueToErrFwd
.1.3.6.1.4.1.2544.1.11.7.5.0.171
Forward ALS
alarmAutoShutdownTxRxLasersDueToHighTemp
.1.3.6.1.4.1.2544.1.11.7.5.0.172
Facility autonomously shut down with Transmitter and Receiver off due to temperature.
alarmLocalFault
.1.3.6.1.4.1.2544.1.11.7.5.0.173
Local Fault Sequence ordered_set received by the local PHY
alarmLocalOscLevelAbnormal
.1.3.6.1.4.1.2544.1.11.7.5.0.174
Rx Laser Current Level Abnormal (used for Local Oscillator)
alarmLossOfGfpFrame
.1.3.6.1.4.1.2544.1.11.7.5.0.175
GFP LOF
alarmLossOfFrameMux
.1.3.6.1.4.1.2544.1.11.7.5.0.176
Multiplexer Loss of Frame
alarmLossOfFrameOtu
.1.3.6.1.4.1.2544.1.11.7.5.0.177
OTU LOF
alarmLossOfFrame
.1.3.6.1.4.1.2544.1.11.7.5.0.178
Section (SONET) / Regeneration Section (SDH) - Loss of Frame
alarmLossOfFrameLossOfMultiFrameOdu
.1.3.6.1.4.1.2544.1.11.7.5.0.179
ODU LOF/LOM
alarmAutoShutdownToHighTemp
.1.3.6.1.4.1.2544.1.11.7.5.0.18
Facility autonomously shut down with Transmitter off due to temperature.
alarmLossOfLane
.1.3.6.1.4.1.2544.1.11.7.5.0.180
Loss of Lane Alignment
alarmLossofMultiframeLowerOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.181
LO-Path Loss Of Multiframe Condition
alarmLossOfMultiFrameOtu
.1.3.6.1.4.1.2544.1.11.7.5.0.182
OTU LOM
alarmLossofMultiframeHigherOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.183
Path LOM
alarmLossOfPointerLowerOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.184
Is this the same as LOF-LP
alarmLossOfPointerHigherOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.185
Path LOP
alarmLosAttProgress
.1.3.6.1.4.1.2544.1.11.7.5.0.186
Loss of Signal Attenuation finding in process
alarmLossOsc
.1.3.6.1.4.1.2544.1.11.7.5.0.187
Loss Of OSC
alarmGfpLossOfClientSig
.1.3.6.1.4.1.2544.1.11.7.5.0.188
GFP Loss Of Client Signal
alarmLoopbackError
.1.3.6.1.4.1.2544.1.11.7.5.0.189
A loop in the PPP-IP path is detected
alarmAutoShutdownToHighTxPwr
.1.3.6.1.4.1.2544.1.11.7.5.0.19
Facility Autonomously Shut Down with Transmitter OFF because of excessiv optical Power Transmitted.
alarmFacilityLoopback
.1.3.6.1.4.1.2544.1.11.7.5.0.190
External (Line) Loopback on Interface
alarmLossofTandemConnectionOduTcmA
.1.3.6.1.4.1.2544.1.11.7.5.0.191
Loss of Tandem Connection ODU Tandem Connection Monitoring Instane A
alarmLossofTandemConnectionOduTcmB
.1.3.6.1.4.1.2544.1.11.7.5.0.192
Loss of Tandem Connection ODU Tandem Connection Monitoring Instane B
alarmLossofTandemConnectionOduTcmC
.1.3.6.1.4.1.2544.1.11.7.5.0.193
Loss of Tandem Connection ODU Tandem Connection Monitoring Instane C
alarmMansw
.1.3.6.1.4.1.2544.1.11.7.5.0.194
This condition will only be shown on the working entity, meaning the MANSW has switched traffic from the working entity to the protection entity.
transientManualWorkingSwitchedBacktoWorking
.1.3.6.1.4.1.2544.1.11.7.5.0.195
Working Traffic (ACT) switched back to WKG facility from PROTN facility manually: sent by PROTN.
transientManualWorkingSwitchedtoProtection
.1.3.6.1.4.1.2544.1.11.7.5.0.196
Working Traffic (ACT) switched from Working facility to Protection facility manually: sent by WKG.
alarmEquipmentNotAccepted
.1.3.6.1.4.1.2544.1.11.7.5.0.197
The Plug cannot support any of the services provisionable on this card OR the Plug is unrecognizable
alarmEquipmentNotApproved
.1.3.6.1.4.1.2544.1.11.7.5.0.198
s recognizable to the extent that service support can
be determined, but is not approved: this is susperseded by SGEO-RATE
alarmCapabilityLevelMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.199
Capability level mismatch
fspR7DeletionTrap
.1.3.6.1.4.1.2544.1.11.7.5.0.2
This trap is sent every time an entity is destroyed.
alarmLaserEndOfLife
.1.3.6.1.4.1.2544.1.11.7.5.0.20
End Of Life [laser degrade].
alarmEquipmentMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.200
The Plug is approved but does not match the specific Plug provisioned: this is superseded by MEA-APPROVE
alarmEquipmentNotSupportedByPhysicalLayer
.1.3.6.1.4.1.2544.1.11.7.5.0.201
Equipment not Support Configured Physical Layer
alarmMeaSwRevision
.1.3.6.1.4.1.2544.1.11.7.5.0.202
Mismatch of SW Revision
alarmMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.203
Non-Specific Mismatch. Equipment Not Match Provisioned Hardware
alarmMidstageFault
.1.3.6.1.4.1.2544.1.11.7.5.0.204
Out of Service due to Midstage Fault.
alarmMultiplexStructureIdentifierMismatchOPU
.1.3.6.1.4.1.2544.1.11.7.5.0.205
Multiplex Structure Identifier Mismatch OPU
alarmBackupNotResponding
.1.3.6.1.4.1.2544.1.11.7.5.0.206
Not Responding
alarmOpenConnectionIndicationOdu
.1.3.6.1.4.1.2544.1.11.7.5.0.207
Open Connection Indication ODU
alarmOpenConnectionIndicationOduTcmA
.1.3.6.1.4.1.2544.1.11.7.5.0.208
Open Connection Indication ODU Tandem Connection Monitoring A
alarmOpenConnectionIndicationOduTcmB
.1.3.6.1.4.1.2544.1.11.7.5.0.209
Open Connection Indication ODU Tandem Connection Monitoring B
alarmServerSignalFailureVf
.1.3.6.1.4.1.2544.1.11.7.5.0.21
Aggregate level failure
alarmOpenConnectionIndicationOduTcmC
.1.3.6.1.4.1.2544.1.11.7.5.0.210
Open Connection Indication ODU Tandem Connection Monitoring C
alarmOduTribMsiMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.211
Tributary Port no and ODTU type do not match in provisioned time slots
alarmTransmitterDisabledOff
.1.3.6.1.4.1.2544.1.11.7.5.0.212
Disablement of Management Access with Transmitter OFF
alarmReceiverDisabled
.1.3.6.1.4.1.2544.1.11.7.5.0.213
Disablement of Management Access with Receiver OFF
alarmOpmAbnormalCondition
.1.3.6.1.4.1.2544.1.11.7.5.0.214
OPM condition is abnormal (degraded)
alarmFaultOnOpm
.1.3.6.1.4.1.2544.1.11.7.5.0.215
Fault detected on OPM
alarmThresOptPowerCtrlFailureHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.216
Optical Power Control Failure High Threshold
alarmThresOptPowerCtrlFailureLow
.1.3.6.1.4.1.2544.1.11.7.5.0.217
Optical Power Control Failure Low Threshold
alarmTxPowerLimited
.1.3.6.1.4.1.2544.1.11.7.5.0.218
The optical output power reached limit
alarmOscOpticalPowerControlFailHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.219
OSC Optical Power Control Failure High Threshold
alarmEqualizationProgress
.1.3.6.1.4.1.2544.1.11.7.5.0.22
Equalization and countdown in progress
alarmOscOpticalPowerControlFailLow
.1.3.6.1.4.1.2544.1.11.7.5.0.220
OSC Optical Power Control Failure Low Threshold
alarmOTDRMeasuringinProgress
.1.3.6.1.4.1.2544.1.11.7.5.0.221
alarmEncryptionModuleCryPasswdError
.1.3.6.1.4.1.2544.1.11.7.5.0.222
3 invalid CRYPW entered; The Module refuses input of CRYPW for xxx sec.
alarmPeerLink
.1.3.6.1.4.1.2544.1.11.7.5.0.223
Failure of Internal Link or Link Protocol (could be protocol incompatibility) between Cards in Protection or Regeneration Pair
alarmPilotReceiveLevelHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.224
Pilot receive level is high
alarmLossOfPilotSignal
.1.3.6.1.4.1.2544.1.11.7.5.0.225
Loss of Pilot Signal
alarmPayloadMismatchGfp
.1.3.6.1.4.1.2544.1.11.7.5.0.226
GFP Payload Mismatch
alarmPayloadMismatchLowerOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.227
LO-Path Payload Mismatch
alarmPayloadMismatchOPU
.1.3.6.1.4.1.2544.1.11.7.5.0.228
OPU Payload Mismatch
alarmPayloadMismatchHigherOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.229
SONET/SDH Path Payload Mismatch
alarmUPortFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.23
Internal U Port Failure
alarmProvPayloadMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.230
Provisioning payload mismatch alarm
alarmPrbsLossOfSeqSynch
.1.3.6.1.4.1.2544.1.11.7.5.0.231
PRBS Loss of Sequence Synchronization
alarmPrbsRcvActivated
.1.3.6.1.4.1.2544.1.11.7.5.0.232
PRBS Receive Activated
alarmPrbsTrmtActivated
.1.3.6.1.4.1.2544.1.11.7.5.0.233
PRBS Transmit Activated
alarmProtectionNotAvailable
.1.3.6.1.4.1.2544.1.11.7.5.0.234
n Not Available)
In the case of Channel Card Protection: due to unequipped or mismatched partner equipment - sent by active facility.
In the case of HST Channel Protection: due to unequipped or mismatched partner plug - sent by active facility;
on an OLM, the pilot laser has been switched off for a defined perion to allow an Optical Time Domain Reflectormeter to be deployed.
In the case of Controller Protection: due to partner OOS-AU or OOS-MA, DSBLD (Protection Not Available).
alarmPowerSupplyUnitFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.235
alarmMaxPowerConsProvModulesToHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.236
The maximum power consumption of all provisioned equipment exceeds the capability of a single PSU in the shelf.
alarmMaxPowerConsEquipModulesToHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.237
The maximum power consumption of the installed equipment exceeds the capability of a single PSU in the shelf.
alarmPowerMissing
.1.3.6.1.4.1.2544.1.11.7.5.0.238
Power Unit Missing
alarmRemoteDefectIndicationLine
.1.3.6.1.4.1.2544.1.11.7.5.0.239
Line / Multiplex Section RDI
alarmAutoShutdownBlock
.1.3.6.1.4.1.2544.1.11.7.5.0.24
Auto Shutdown Block
alarmRemoteDefectIndicationLowerOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.240
LO-Path Remote Defect Indication
alarmRemoteDefectIndicationHigherOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.241
Path RDI
transientPmSnapshotEnded
.1.3.6.1.4.1.2544.1.11.7.5.0.242
Reference value save end
alarmDcnCommunicationFail
.1.3.6.1.4.1.2544.1.11.7.5.0.243
The connection to the shelf is dysfunctional or the connection to the module within the shelf is dysfunctional
alarmNtpForSchedEqlzRequired
.1.3.6.1.4.1.2544.1.11.7.5.0.244
Scheduled Equalization requires NTP to be enabled
alarmSignalDegradeOlm
.1.3.6.1.4.1.2544.1.11.7.5.0.245
Signal Degrade
alarmSignalDegradeLine
.1.3.6.1.4.1.2544.1.11.7.5.0.246
Line/Mux Section SD alarm; related to a configurable threshold
alarmSignalDegradationonLinkVector
.1.3.6.1.4.1.2544.1.11.7.5.0.247
Signal Degradation on Link Vector. Superseeded by SF-LINK.
alarmSignalDegradeOdu
.1.3.6.1.4.1.2544.1.11.7.5.0.248
ODU Signal Degrade alarm; Related to a configurable threshold
alarmSignalDegradeOtu
.1.3.6.1.4.1.2544.1.11.7.5.0.249
OTU Signal Degrade alarm; related to a configurable threshold
alarmAutoPowerShutdown
.1.3.6.1.4.1.2544.1.11.7.5.0.25
Automatic Power Shutdown
alarmPcsSignalDegrade
.1.3.6.1.4.1.2544.1.11.7.5.0.250
Pysical Coding Sublayer Signal Degrade alarm; related to a configurable threshold
alarmSignalDegradeScn
.1.3.6.1.4.1.2544.1.11.7.5.0.251
Sec/RS signal degrade alarm; related to a configurable threshold
alarmSignalDegradeOduTcmA
.1.3.6.1.4.1.2544.1.11.7.5.0.252
Signal Degrade ODU Tandem Connection Monitoring Instance A. Related to a configurable threshold
alarmSignalDegradeOduTcmB
.1.3.6.1.4.1.2544.1.11.7.5.0.253
Signal Degrade ODU Tandem Connection Monitoring Instance B. Related to a configurable threshold
alarmSignalDegradeOduTcmC
.1.3.6.1.4.1.2544.1.11.7.5.0.254
Signal Degrade ODU Tandem Connection Monitoring Instance C. Related to a configurable threshold
alarmEncryptionModuleSelfTestFail
.1.3.6.1.4.1.2544.1.11.7.5.0.255
Noncritical selftest failed
alarmEncryptionModuleSelfTestFailCritical
.1.3.6.1.4.1.2544.1.11.7.5.0.256
Critical selftest failed
alarmSignalFailureOnLink
.1.3.6.1.4.1.2544.1.11.7.5.0.257
Signal Failure on Link
alarmSignalFailureonLinkVector
.1.3.6.1.4.1.2544.1.11.7.5.0.258
Signal Fail Link Vector
alarmSignalFailureOPU
.1.3.6.1.4.1.2544.1.11.7.5.0.259
This is a very severe signal degradation or loss
alarmConfOutPowerTransTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.26
TCA - Optical Power Transmitted (output) too high
alarmServerSignalFailTx
.1.3.6.1.4.1.2544.1.11.7.5.0.260
Aggregate level failure
alarmFacilityDataRateNotSupported
.1.3.6.1.4.1.2544.1.11.7.5.0.261
The Plug inserted cannot support the actual service provisioned on this card: this is superseded by the above
transientCryptoSessKeyLifetimeChanged
.1.3.6.1.4.1.2544.1.11.7.5.0.262
Change of session key lifetime
alarmLossofSequenceLowerOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.263
LO-Path Loss Of Sequence
alarmLossofSequenceHigherOrderPath
.1.3.6.1.4.1.2544.1.11.7.5.0.264
Path Loss Of Sequence
alarmServerSignalFail
.1.3.6.1.4.1.2544.1.11.7.5.0.265
All member ports signals have failed
alarmServerSignalFailureGfp
.1.3.6.1.4.1.2544.1.11.7.5.0.266
GFP Server Signal Failure
alarmServerSignalFailureODU
.1.3.6.1.4.1.2544.1.11.7.5.0.267
ODU Server Signal Failure
alarmServerSignalFailurePath
.1.3.6.1.4.1.2544.1.11.7.5.0.268
SONET/SDH Path Server Signal Failure
alarmServerSignalFailureSectionRS
.1.3.6.1.4.1.2544.1.11.7.5.0.269
Section (SONET) / Regeneration Section (SDH) - Server Signal Failure
alarmConfOutPowerTransTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.27
TCA - Optical Power Transmitted (output) too low
transientProtSwToDuplexCompl
.1.3.6.1.4.1.2544.1.11.7.5.0.270
Switch to Partner Controller complete
transientProtSwToDuplexFail
.1.3.6.1.4.1.2544.1.11.7.5.0.271
Switch to Partner Controller failed
alarmSwitchToDuplexInhibited
.1.3.6.1.4.1.2544.1.11.7.5.0.272
Switch-Over to Partner Controller inhibited
transientProtSwToDuplexStart
.1.3.6.1.4.1.2544.1.11.7.5.0.273
Switch to Partner Controller started
alarmSwitchFailed
.1.3.6.1.4.1.2544.1.11.7.5.0.274
Failure to Respond to Switch/Bridge Request within 50 ms
transientSwResetReload
.1.3.6.1.4.1.2544.1.11.7.5.0.275
System Restart-RELOAD
alarmCurrentTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.276
Current Too High
alarmAttOnReceiverFiberHigherThanMonitor
.1.3.6.1.4.1.2544.1.11.7.5.0.277
Attenuation Rx Too High
alarmAttOnReceiverFiberLowerThanMonitor
.1.3.6.1.4.1.2544.1.11.7.5.0.278
Attenuation Rx Too Low
alarmAttOnTransmitterFiberHigherThanMonitor
.1.3.6.1.4.1.2544.1.11.7.5.0.279
Attenuation Tx Too High
alarmOptSignalFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.28
Optical Power Transmit Signal Failure
alarmAttOnTransmitterFiberLowerThanMonitor
.1.3.6.1.4.1.2544.1.11.7.5.0.280
Attenuation Tx Too Low
alarmThres15MinExceededOduBbe
.1.3.6.1.4.1.2544.1.11.7.5.0.281
Background Block Errors ODU Section Monitoring
transientThres1DayExceededOduBbe
.1.3.6.1.4.1.2544.1.11.7.5.0.282
Background Block Errors ODU Section Monitoring
alarmThres15MinExceededOtuBbe
.1.3.6.1.4.1.2544.1.11.7.5.0.283
Background Block Errors OTU Section Monitoring
transientThres1DayExceededOtuBbe
.1.3.6.1.4.1.2544.1.11.7.5.0.284
Background Block Errors OTU Section Monitoring
alarmThres15MinExceededOduTcmABbe
.1.3.6.1.4.1.2544.1.11.7.5.0.285
Background Block Errors ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmABbe
.1.3.6.1.4.1.2544.1.11.7.5.0.286
Background Block Errors ODU Tandem Connection Monitoring
alarmThres15MinExceededOduTcmBBbe
.1.3.6.1.4.1.2544.1.11.7.5.0.287
Background Block Errors ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmBBbe
.1.3.6.1.4.1.2544.1.11.7.5.0.288
Background Block Errors ODU Tandem Connection Monitoring
alarmThres15MinExceededOduTcmCBbe
.1.3.6.1.4.1.2544.1.11.7.5.0.289
Background Block Errors ODU Tandem Connection Monitoring
alarmDsbdChannelPowerTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.29
Optical power is not blocked when service is disabled (OPT > -25 dBm).
transientThres1DayExceededOduTcmCBbe
.1.3.6.1.4.1.2544.1.11.7.5.0.290
Background Block Errors ODU Tandem Connection Monitoring
alarmThres15MinExceededFecBERCE
.1.3.6.1.4.1.2544.1.11.7.5.0.291
Bit error rate before FEC 15 minutes high threshold crossed
transientThres1DayExceededFecBERCE
.1.3.6.1.4.1.2544.1.11.7.5.0.292
Bit error rate before FEC 1day high threshold crossed
alarmBrPwrRxTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.293
Backreflection Rx too High
alarmChromaticDispersionTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.294
Chromatic Dispersion too High
alarmChromaticDispersionTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.295
Chromatic Dispersion too Low
alarmDispersionCompensationTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.296
Chromatic Dispersion Compensation too High
alarmDispersionCompensationTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.297
Chromatic Dispersion Compensation too Low
alarmThres15MinExceededFecCE
.1.3.6.1.4.1.2544.1.11.7.5.0.298
FEC Corrected Errors Exceeded 15 Minute Threshold
transientThres1DayExceededFecCE
.1.3.6.1.4.1.2544.1.11.7.5.0.299
FEC Corrected Errors Exceeded Day Threshold
fspR7StateChangeTrap
.1.3.6.1.4.1.2544.1.11.7.5.0.3
This trap is sent when an entity state is changed.
alarmLossOfSignalCPort
.1.3.6.1.4.1.2544.1.11.7.5.0.30
Loss of signal on C Port that corresponds to the network VCH via CRS
alarmCarrierFreqOffsetTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.300
Carrier Frequency Offset too High
alarmCarrierFreqOffsetTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.301
Carrier Frequency Offset too Low
alarmThres15MinExceededSonetLineCV
.1.3.6.1.4.1.2544.1.11.7.5.0.302
Coding Violations Line
transientThres1DayExceededSonetLineCV
.1.3.6.1.4.1.2544.1.11.7.5.0.303
Coding Violations Line
alarmThres15MinExceededPhysConvCV
.1.3.6.1.4.1.2544.1.11.7.5.0.304
Coding Violations Physical Coding Layer
transientThres1DayExceededPhysConvCV
.1.3.6.1.4.1.2544.1.11.7.5.0.305
Coding Violations Physical Coding Layer
alarmThres15MinExceededSonetSectCV
.1.3.6.1.4.1.2544.1.11.7.5.0.306
Coding Violations Section
transientThres1DayExceededSonetSectCV
.1.3.6.1.4.1.2544.1.11.7.5.0.307
Coding Violations Section
alarmThres15MinExceededPhysConvDE
.1.3.6.1.4.1.2544.1.11.7.5.0.308
Disparity Errors Physical Coding Layer
transientThres1DayExceededPhysConvDE
.1.3.6.1.4.1.2544.1.11.7.5.0.309
Disparity Errors Physical Coding Layer
alarmLossOfSignalNPort
.1.3.6.1.4.1.2544.1.11.7.5.0.31
Internal N Port Failure
alarmDifferentialGroupDelayTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.310
Differential Group Delay too High
alarmThres15MinExceededFecES
.1.3.6.1.4.1.2544.1.11.7.5.0.311
Errored Seconds FEC OTU Monitoring
transientThres1DayExceededFecES
.1.3.6.1.4.1.2544.1.11.7.5.0.312
Errored Seconds FEC OTU Monitoring
alarmThres15MinExceededSonetLineES
.1.3.6.1.4.1.2544.1.11.7.5.0.313
Errored Seconds Line
transientThres1DayExceededSonetLineES
.1.3.6.1.4.1.2544.1.11.7.5.0.314
Errored Seconds Line
alarmThres15MinExceededOduES
.1.3.6.1.4.1.2544.1.11.7.5.0.315
Errored Seconds ODU Path Monitoring
transientThres1DayExceededOduES
.1.3.6.1.4.1.2544.1.11.7.5.0.316
Errored Seconds ODU Path Monitoring
alarmThres15MinExceededOtuES
.1.3.6.1.4.1.2544.1.11.7.5.0.317
Errored Seconds OTU Section Monitoring
transientThres1DayExceededOtuES
.1.3.6.1.4.1.2544.1.11.7.5.0.318
Errored Seconds OTU Section Monitoring
alarmThres15MinExceededPhysConvES
.1.3.6.1.4.1.2544.1.11.7.5.0.319
Errored Seconds Physical Coding Layer
alarmOutputPowerFault
.1.3.6.1.4.1.2544.1.11.7.5.0.32
There is no channel output power while the input power for the channel is above the LOS TH and the channel attenuation is set to a valid value.
transientThres1DayExceededPhysConvES
.1.3.6.1.4.1.2544.1.11.7.5.0.320
Errored Seconds Physical Coding Layer
alarmThres15MinExceededSonetSectES
.1.3.6.1.4.1.2544.1.11.7.5.0.321
Errored Seconds Section
transientThres1DayExceededSonetSectES
.1.3.6.1.4.1.2544.1.11.7.5.0.322
Errored Seconds Section
alarmThres15MinExceededOduTcmAES
.1.3.6.1.4.1.2544.1.11.7.5.0.323
Errored Seconds ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmAES
.1.3.6.1.4.1.2544.1.11.7.5.0.324
Errored Seconds ODU Tandem Connection Monitoring
alarmThres15MinExceededOduTcmBES
.1.3.6.1.4.1.2544.1.11.7.5.0.325
Errored Seconds ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmBES
.1.3.6.1.4.1.2544.1.11.7.5.0.326
Errored Seconds ODU Tandem Connection Monitoring
alarmThres15MinExceededOduTcmCES
.1.3.6.1.4.1.2544.1.11.7.5.0.327
Errored Seconds ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmCES
.1.3.6.1.4.1.2544.1.11.7.5.0.328
Errored Seconds ODU Tandem Connection Monitoring
alarmLatencyTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.329
TCA -Round Trip Delay Too High
alarmEqlzAdjust
.1.3.6.1.4.1.2544.1.11.7.5.0.33
Channel power adjustment is in progress
alarmLatencyTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.330
TCA -Round trip delay Too Low
alarmLaserBiasCurrentNormalizedtooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.331
TCA - Laser Bias Current Level too High. Fixed threshold has been crossed.
alarmLocalOscTemperatureTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.332
Rx Laser used for Local Oscillator Temperature High
alarmLocalOscTemperatureTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.333
Rx Laser used for Local Oscillator Temperature Low
alarmPumpLaser1TempTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.334
TCA - Fixed high threshold of Laser 1 Temperature has been crossed.
alarmPumpLaser1TempTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.335
TCA - Fixed low threshold of Laser 1 Temperature has been crossed.
alarmPumpLaser2TempTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.336
TCA - Fixed high threshold of Laser 2 Temperature has been crossed.
alarmPumpLaser2TempTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.337
TCA - Fixed low threshold of Laser 2 Temperature has been crossed.
alarmPumpLaser3TempTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.338
TCA - Fixed high threshold of Laser 3 Temperature has been crossed.
alarmPumpLaser3TempTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.339
TCA - Fixed low threshold of Laser 3 Temperature has been crossed.
alarmAmpFailure
.1.3.6.1.4.1.2544.1.11.7.5.0.34
SGEO-AMP is raised at a dependent entity due to an AMP auto shutdown condition at the associated supporting entity.
alarmPumpLaser4TempTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.340
TCA - Fixed high threshold of Laser 4 Temperature has been crossed.
alarmPumpLaser4TempTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.341
TCA - Fixed low threshold of Laser 4 Temperature has been crossed.
alarmOscPwrTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.342
Optical Supervisory Channel Input Power current high threshold crossed
alarmOscPwrTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.343
Optical Supervisory Channel Input Power current low threshold crossed
alarmRamanPumpPwrTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.344
TCA - Fixed high threshold of Pump Laser has been crossed.
alarmRamanPumpPwrTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.345
TCA - Fixed low threshold of Pump Power has been crossed.
alarmRoundTripDelayTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.346
TCA - Round trip delay too high
alarmRoundTripDelayTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.347
TCA -Round trip delay Too Low
alarmThres15MinExceededSonetSectSEFS
.1.3.6.1.4.1.2544.1.11.7.5.0.348
Severely Errored Framing Seconds Section
transientThres1DayExceededSonetSectSEFS
.1.3.6.1.4.1.2544.1.11.7.5.0.349
Severely Errored Framing Seconds Section
alarmEqptProvMismatch
.1.3.6.1.4.1.2544.1.11.7.5.0.35
Provisioning incompatible with configuration
alarmThres15MinExceededFecSES
.1.3.6.1.4.1.2544.1.11.7.5.0.350
FEC-SES 15Min Exceeded
transientThres1DayExceededFecSES
.1.3.6.1.4.1.2544.1.11.7.5.0.351
FEC-SES 1Day Exceeded
alarmThres15MinExceededSonetLineSES
.1.3.6.1.4.1.2544.1.11.7.5.0.352
Severely Errored Seconds Line
transientThres1DayExceededSonetLineSES
.1.3.6.1.4.1.2544.1.11.7.5.0.353
Severely Errored Seconds Line
alarmThres15MinExceededOduSES
.1.3.6.1.4.1.2544.1.11.7.5.0.354
Severely Errored Seconds ODU Path Monitoring
transientThres1DayExceededOduSES
.1.3.6.1.4.1.2544.1.11.7.5.0.355
Severely Errored Seconds ODU Path Monitoring
alarmThres15MinExceededOtuSES
.1.3.6.1.4.1.2544.1.11.7.5.0.356
Severely Errored Seconds OTU Section Monitoring
transientThres1DayExceededOtuSES
.1.3.6.1.4.1.2544.1.11.7.5.0.357
Severely Errored Seconds OTU Section Monitoring
alarmThres15MinExceededSonetSectSES
.1.3.6.1.4.1.2544.1.11.7.5.0.358
Severely Errored Seconds Section
transientThres1DayExceededSonetSectSES
.1.3.6.1.4.1.2544.1.11.7.5.0.359
Severely Errored Seconds Section
alarmBackreflectionTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.36
Backreflection Power too High, at Tx port
alarmThres15MinExceededOduTcmASES
.1.3.6.1.4.1.2544.1.11.7.5.0.360
Severely Errored Seconds ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmASES
.1.3.6.1.4.1.2544.1.11.7.5.0.361
Severely Errored Seconds ODU Tandem Connection Monitoring
alarmThres15MinExceededOduTcmBSES
.1.3.6.1.4.1.2544.1.11.7.5.0.362
Severely Errored Seconds ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmBSES
.1.3.6.1.4.1.2544.1.11.7.5.0.363
Severely Errored Seconds ODU Tandem Connection Monitoring
alarmThres15MinExceededOduTcmCSES
.1.3.6.1.4.1.2544.1.11.7.5.0.364
Severely Errored Seconds ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmCSES
.1.3.6.1.4.1.2544.1.11.7.5.0.365
Severely Errored Seconds ODU Tandem Connection Monitoring
alarmLogicalLanesSkewTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.366
Skew between logical lanes farthest apart high threshold condition
alarmSignalToNoiseRatioTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.367
Signal-to-Noise Ratio too Low
alarmSubModuleTempTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.368
nly when ERRFWD=LSROFF. Enables/disables theSubmodule Tempe
possibility to delay turning off the laser.Relevant only when ERRFWD=LSROFF. Enables/disables theSubmodule Temperature too High
possibility to delay turning off the laser.
This applies to the case when turning off the laserrature too High
is done as an error forwarding mechanism.
This applies to the case when turning off the laser
is done as an error forwarding mechanism.
alarmTemperatureTooHigh
.1.3.6.1.4.1.2544.1.11.7.5.0.369
Temperature Too High
transientEqlzStart
.1.3.6.1.4.1.2544.1.11.7.5.0.37
Start of Connection Equalization
alarmTemperatureTooLow
.1.3.6.1.4.1.2544.1.11.7.5.0.370
Temperature Too Low
alarmThres15MinExceededSonetLineUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.371
Unavailable Seconds Line
transientThres1DayExceededSonetLineUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.372
Unavailable Seconds Line
alarmThres15MinExceededOduUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.373
Unavailable Seconds ODU Path Monitoring
transientThres1DayExceededOduUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.374
Unavailable Seconds ODU Path Monitoring
alarmThres15MinExceededOtuUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.375
Unavailable Seconds OTU Section Monitoring
transientThres1DayExceededOtuUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.376
Unavailable Seconds OTU Section Monitoring
alarmThres15MinExceededOduTcmAUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.377
Unavailable Seconds ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmAUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.378
Unavailable Seconds ODU Tandem Connection Monitoring
alarmThres15MinExceededOduTcmBUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.379
Unavailable Seconds ODU Tandem Connection Monitoring
transientEqlzFailed
.1.3.6.1.4.1.2544.1.11.7.5.0.38
Failure of Connection Equalization
transientThres1DayExceededOduTcmBUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.380
Unavailable Seconds ODU Tandem Connection Monitoring
alarmThres15MinExceededOduTcmCUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.381
Unavailable Seconds ODU Tandem Connection Monitoring
transientThres1DayExceededOduTcmCUAS
.1.3.6.1.4.1.2544.1.11.7.5.0.382
Unavailable Seconds ODU Tandem Connection Monitoring