ffpApsType

ADVA-FSPR7-MIB · .1.3.6.1.4.1.2544.1.11.7.7.6.3.1.12
MIB view Table view

Object

column r/w ADVA-FSPR7-TC-MIBApsType 
The type of APS implemented in this protection group.

Context

MIB
ADVA-FSPR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.12
Type
column
Access
readwrite
Status
current
Parent
ffpEntry
Table
ffpTable
Siblings
16

Syntax

ADVA-FSPR7-TC-MIBApsType
Source
ADVA-FSPR7-TC-MIBApsType
Base type
Enumeration

Values & Constraints

Type Values
0undefined
2line
3sncN
4sncI
5sncS
6eth
7phys
8sncNPM
9sncNTCM
10sncISM
11mux
12pcs
13ethSncI
14ethSncN
15ethSncS
16ethSncT
18sncNLine
19sncNPath
20path

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ffpRowStatus
RowStatus
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.1
ffpFarEndIp
IP Address assigned to PPP Termination Point on Far-End NE. Default is set by NE System on LINK establishment if FENDIPACPT = Y
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.10
ffpPeerAid
AID of Protection Partner involved in the protection group.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.11
ffpRevertMode
Revertive Protection Switching
columnADVA-FSPR7-TC-MIBApsRevertMode.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.13
ffpWaitToRestore
Wait to Restore Timer value
columnmin Unsigned32.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.14
ffpDirection
Indicates whether the APS function is 'unidirectional' (single-ended) or 'bidirectional' (dual-ended).
columnADVA-MIBApsDirection.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.15
ffpProtectionTypecolumnADVA-FSPR7-TC-MIBFspR7ProtectionType.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.16
ffpApsChannel
Selection of the location of the APS channel
columnADVA-FSPR7-TC-MIBFspR7ApsChannel.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.17
ffpCreationMethod
Type of protection (normal/forced)
columnADVA-FSPR7-TC-MIBFfpType.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.2
ffpSDswitching
This state controls whether the switch criteria for the APS group will include the Signal Degrade alarm.
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.3
ffpHoldOffTime
This value controls the switch delay (0 to 10 seconds in 100ms steps) for the protection group. Changing the hold-off time when the timer is active will not affect the active time…
columnADVA-MIBApsHoldoffTime.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.4
ffpProtectionMech
The protection type of this protection group.
columnADVA-MIBProtectionMech.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.5
ffpWorkingAid
AID of working port involved in the protection group.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.6
ffpProtectionAid
(Protection AID) AID of protection entity involved in the protection group.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.7
ffpSignalDegradeSwitching
Switch Trigger Additionally on Signal Degrade Link Detection
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.8
ffpSignalFailureSwitching
Switch Trigger on Signal Failure Link Detection
columnADVA-MIBEnableState.1.3.6.1.4.1.2544.1.11.7.7.6.3.1.9