alarmApsProtocolFailure
ADVA-FSPR7-MIB ·
.1.3.6.1.4.1.2544.1.11.7.5.0.81
Object
notification
Protocol Failure between NEND and FEND. Reported by protecting facility (PATHID==PROTN).
Context
- MIB
- ADVA-FSPR7-MIB
- OID
.1.3.6.1.4.1.2544.1.11.7.5.0.81- Type
- notification
- Status
- current
- Parent
- fspR7Trap
- Siblings
- 441
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fspR7CreationTrap This trap is sent every time an entity is created. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.1 |
| alarmRemoved The equipment has been removed / unplugged / disconnected.
This condition has been determined to be more probable than that below,
which is also supersedes. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10 |
| alarmLossOfCharSync Unable to syncronise on the characters in the incoming datastream | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.100 |
| fspR7EquipmentInsertedTrap This trap is sent when an equipment is inserted. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10001 |
| fspR7EquipmentRemovedTrap This trap is sent when an equipment is inserted. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10002 |
| fspR7WriteAccessRequest | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10010 |
| fspR7WriteAccessGranted | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10011 |
| fspR7WriteAccessRevoked | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10012 |
| fspR7WriteAccessDenied | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10013 |
| fspR7WriteAccessTimeout | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10014 |
| fspR7WriteAccessRequestTimeout | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10015 |
| alarmLossOfCharSyncFromFarEnd Loss of Character Synchronization from FEND | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.101 |
| transientCryptoAuthPasswdInvalid A wrong Authentication password was sent with the command | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.102 |
| alarmEncryptionPortEncryptionSwitchOffEnabled User enabled switching encryption off | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.103 |
| alarmEncryptionModuleCryPasswdMissing Crypto Officer password missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.104 |
| transientCryptoPasswdChanged Crypto Officer Password Changed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.105 |
| transientCryptoRtf Encryption settings reset to factory defaults | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.106 |
| alarmEncryptionModuleSelfTestStarted Encryption selftest running | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.107 |
| alarmEncryptionPortEncryptionSwitchedOff Encryption switched off | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.108 |
| alarmOpuClientSignalFail OPU Client Signal Fail | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.109 |
| alarmLossOfSignal Loss of Signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.11 |
| alarmDatabaseMismatch compare DBACT__FAIL x.y.z in UBR note DBTYPE is retrievable immediately with RTRV-SYS, we do not currently supported a RTRV-COND-SYS | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.110 |
| alarmDatabaseFailure Database Failure detect by Database Check Routine | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.111 |
| alarmDatabaseNcuMismatch This parameter indicates a change of NCU Type (NCU<->NCU2E) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.112 |
| alarmDbReplicationIncompleted DB Replication Incomplete | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.113 |
| alarmDatabaseVersionMismatch The current DB is newer than required, or not updateable | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.114 |
| alarmXfpDecisionThresSetFailed Decision threshold setting failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.115 |
| alarmDuplexLinkFailure Controller Protection Link Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.116 |
| transientFarEndDyingGasp signal received from far end upon far end power loss | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.117 |
| alarmSingleFanFailure Fan operation is degraded and needs attention (cleaning, filter replacement or possible fan replacement). | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.118 |
| alarmMultipleFanFailure Fan is failing or failed and needs replacement. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.119 |
| alarmOptInputPwrReceivedTooLow Optical Power Rx too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.12 |
| alarmLossOfSignalTransmitter A Loss of signal has been detected on the FAR-END facility. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.120 |
| transientFarEndChanged Neighbor Discovery Dectected a Far End Change | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.121 |
| alarmFarEndIpAddressUnknown Send by active facility. If an FEND IP Address is changed the corresponding NODE-IP cannot be determined by the OSCM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.122 |
| alarmFarEndCommFailure The connection to the Far End Optojack plug is dysfunctional | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.123 |
| transientTopologyDataInvalid Topology Detection Data invalid | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.124 |
| alarmBackupForcedToHalt Forced Halt | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.125 |
| transientForcedReboot Forced Reboot | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.126 |
| alarmFacilityForcedOn Laser or Switch forced ON | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.127 |
| alarmFwdAseTableFailPilot Force of BWD Raman pilot for FWD ASE Table Build Failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.128 |
| alarmFwdAseTableOnPilot Force the BWD Raman Pilot on to allow building of FWD Raman ASE Table | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.129 |
| alarmOptInputPwrReceivedTooHigh Optical Power Rx too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.13 |
| transientCryptoFwpUpdate A new FWP is installed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.130 |
| alarmEncryptionModuleFwpUpdateEnabled FWP upgrade is allowed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.131 |
| alarmFwpMismatchDownloadNotServiceAffecting Firmware Package Mismatch; download will be NOT Service Affecting | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.132 |
| alarmFwpMismatchDownloadServiceAffecting Firmware Package Mismatch; download will be Service Affecting | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.133 |
| transientCryptoFwpRevChanged FWP upgrade revision number is changed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.134 |
| alarmGainTiltNotSettable The nominal tilt and gain values are not settable | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.135 |
| alarmHighBer More than 16 invalid 64B/66B sync headers within the current 125us period | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.136 |
| alarmReceiverOverloadProtection Safety condition, protecting the system against too high receive power. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.137 |
| alarmHwInitializing Hardware is Initializing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.138 |
| alarmHwOprReachedHT HW OPR has reached a high thershold and could be damaged | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.139 |
| alarmLaserTemperatureTooHigh TCA - Fixed high threshold of Laser Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.14 |
| alarmHwDegrade HW operation is degraded by a HW fault, but traffic is unaffected. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.140 |
| alarmHwFailure General Hardware Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.141 |
| alarmSwitchtoProtectionInhibited Protection Switch Inhibited. Switch to PROTN facility Locked Out. Reported by WKG facility. Leads to PSI state. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.142 |
| alarmSwitchtoWorkingInhibited Protection Release Inhibited. Switch back to WKG facility Locked Out. Reported by PROTN facility. Leads to PRI state. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.143 |
| transientIntrusionRx Intrusion on the Receiver Fiber based on GRADHT-AT keyword. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.144 |
| transientIntrusionTx Intrusion on the Receiver Fiber based on GRADHT-AT keyword. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.145 |
| transientEncryptionPortSingleKeyExchgFailed At least one Key exchange failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.146 |
| transientCryptoKeyExchgFailCondClr Key exchange fail counter reset | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.147 |
| alarmEncryptionPortKeyInitExchgMissed The initial successful key exchange has not be completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.148 |
| alarmEncryptionPortMaxKeyExchgFailuresReachedIs Maximum Key exchange failure count reached | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.149 |
| alarmLaserTemperatureTooLow TCA - Fixed low threshold of Laser Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.15 |
| alarmEncryptionPortMaxKeyExchgFailuresReachedOos Session Key missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.150 |
| alarmEncryptionPortKeyExchangedForced Encryption Key exchanged forced | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.151 |
| alarmLaserOnDelay Laser in process of turning on | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.152 |
| alarmLockedDefectOdu ODU Locked | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.153 |
| alarmLockedDefectOduTcmA Locked Defect ODU TCM Instance A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.154 |
| alarmLockedDefectOduTcmB Locked Defect ODU TCM Instance B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.155 |
| alarmLockedDefectOduTcmC Locked Defect ODU TCM Instance C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.156 |
| alarmLinkControlProtocolFailure Link Control Protocol setup error or timeout | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.157 |
| alarmLinkDown Failure of External Linkage | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.158 |
| alarmAutoShutdownSendingAisLine Auto Shutdown (L-AIS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.159 |
| alarmOptOutputPowerTransTooLow TCA - Optical Power Transmitted (output) too low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.16 |
| alarmAutoShutdownSendingAisOdu Auto Shutdown (ODU-AIS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.160 |
| alarmAutoShutdownSendingAisOpu Auto Shutdown (OPU-AIS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.161 |
| alarmClientFailForwarding Forwarding of Client Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.162 |
| alarmAutoShutdownAls Auto Shutdown (ALS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.163 |
| alarmAutoAmpShutdown Amplifier Auto Shutdown | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.164 |
| alarmAutoShutdownAmpAps Auto Shutdown on Network Tx fiber due to LOS on Network Rx fiber (AMP-APS enabled) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.165 |
| alarmAseTableBuild Auto shutdown due to missing ASE table | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.166 |
| alarmAutoShutdownOpuClientSignalFail Automatic Shutdown - Client Signal Fail transmit (LKDO-CSF) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.167 |
| alarmAutoShutdownSendingEPC Auto Shutdown (EPC) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.168 |
| alarmAutoShutdownSendingLckOdu Auto Shutdown (ODU-LCK) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.169 |
| alarmOptOutputPowerTransTooHigh TCA - Optical Power Transmitted (output) too high | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.17 |
| alarmAutoShutdownSendingOciOdu Auto Shutdown (ODU-OCI) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.170 |
| alarmAutoShutdownLaserOffDueToErrFwd Forward ALS | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.171 |
| alarmAutoShutdownTxRxLasersDueToHighTemp Facility autonomously shut down with Transmitter and Receiver off due to temperature. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.172 |
| alarmLocalFault Local Fault Sequence ordered_set received by the local PHY | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.173 |
| alarmLocalOscLevelAbnormal Rx Laser Current Level Abnormal (used for Local Oscillator) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.174 |
| alarmLossOfGfpFrame GFP LOF | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.175 |
| alarmLossOfFrameMux Multiplexer Loss of Frame | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.176 |
| alarmLossOfFrameOtu OTU LOF | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.177 |
| alarmLossOfFrame Section (SONET) / Regeneration Section (SDH) - Loss of Frame | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.178 |
| alarmLossOfFrameLossOfMultiFrameOdu ODU LOF/LOM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.179 |
| alarmAutoShutdownToHighTemp Facility autonomously shut down with Transmitter off due to temperature. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.18 |
| alarmLossOfLane Loss of Lane Alignment | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.180 |
| alarmLossofMultiframeLowerOrderPath LO-Path Loss Of Multiframe Condition | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.181 |
| alarmLossOfMultiFrameOtu OTU LOM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.182 |
| alarmLossofMultiframeHigherOrderPath Path LOM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.183 |
| alarmLossOfPointerLowerOrderPath Is this the same as LOF-LP | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.184 |
| alarmLossOfPointerHigherOrderPath Path LOP | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.185 |
| alarmLosAttProgress Loss of Signal Attenuation finding in process | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.186 |
| alarmLossOsc Loss Of OSC | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.187 |
| alarmGfpLossOfClientSig GFP Loss Of Client Signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.188 |
| alarmLoopbackError A loop in the PPP-IP path is detected | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.189 |
| alarmAutoShutdownToHighTxPwr Facility Autonomously Shut Down with Transmitter OFF because of excessiv optical Power Transmitted. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.19 |
| alarmFacilityLoopback External (Line) Loopback on Interface | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.190 |
| alarmLossofTandemConnectionOduTcmA Loss of Tandem Connection ODU Tandem Connection Monitoring Instane A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.191 |
| alarmLossofTandemConnectionOduTcmB Loss of Tandem Connection ODU Tandem Connection Monitoring Instane B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.192 |
| alarmLossofTandemConnectionOduTcmC Loss of Tandem Connection ODU Tandem Connection Monitoring Instane C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.193 |
| alarmMansw This condition will only be shown on the working entity, meaning the MANSW has switched traffic from the working entity to the protection entity. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.194 |
| transientManualWorkingSwitchedBacktoWorking Working Traffic (ACT) switched back to WKG facility from PROTN facility manually: sent by PROTN. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.195 |
| transientManualWorkingSwitchedtoProtection Working Traffic (ACT) switched from Working facility to Protection facility manually: sent by WKG. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.196 |
| alarmEquipmentNotAccepted The Plug cannot support any of the services provisionable on this card OR the Plug is unrecognizable | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.197 |
| alarmEquipmentNotApproved The Plug is recognizable to the extent that service support can
be determined, but is not approved: this is susperseded by SGEO-RATE | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.198 |
| alarmCapabilityLevelMismatch Capability level mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.199 |
| fspR7DeletionTrap This trap is sent every time an entity is destroyed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.2 |
| alarmLaserEndOfLife End Of Life [laser degrade]. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.20 |
| alarmEquipmentMismatch The Plug is approved but does not match the specific Plug provisioned: this is superseded by MEA-APPROVE | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.200 |
| alarmEquipmentNotSupportedByPhysicalLayer Equipment not Support Configured Physical Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.201 |
| alarmMeaSwRevision Mismatch of SW Revision | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.202 |
| alarmMismatch Non-Specific Mismatch. Equipment Not Match Provisioned Hardware | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.203 |
| alarmMidstageFault Out of Service due to Midstage Fault. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.204 |
| alarmMultiplexStructureIdentifierMismatchOPU Multiplex Structure Identifier Mismatch OPU | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.205 |
| alarmBackupNotResponding Not Responding | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.206 |
| alarmOpenConnectionIndicationOdu Open Connection Indication ODU | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.207 |
| alarmOpenConnectionIndicationOduTcmA Open Connection Indication ODU Tandem Connection Monitoring A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.208 |
| alarmOpenConnectionIndicationOduTcmB Open Connection Indication ODU Tandem Connection Monitoring B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.209 |
| alarmServerSignalFailureVf Aggregate level failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.21 |
| alarmOpenConnectionIndicationOduTcmC Open Connection Indication ODU Tandem Connection Monitoring C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.210 |
| alarmOduTribMsiMismatch Tributary Port no and ODTU type do not match in provisioned time slots | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.211 |
| alarmTransmitterDisabledOff Disablement of Management Access with Transmitter OFF | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.212 |
| alarmReceiverDisabled Disablement of Management Access with Receiver OFF | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.213 |
| alarmOpmAbnormalCondition OPM condition is abnormal (degraded) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.214 |
| alarmFaultOnOpm Fault detected on OPM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.215 |
| alarmThresOptPowerCtrlFailureHigh Optical Power Control Failure High Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.216 |
| alarmThresOptPowerCtrlFailureLow Optical Power Control Failure Low Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.217 |
| alarmTxPowerLimited The optical output power reached limit | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.218 |
| alarmOscOpticalPowerControlFailHigh OSC Optical Power Control Failure High Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.219 |
| alarmEqualizationProgress Equalization and countdown in progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.22 |
| alarmOscOpticalPowerControlFailLow OSC Optical Power Control Failure Low Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.220 |
| alarmOTDRMeasuringinProgress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.221 |
| alarmEncryptionModuleCryPasswdError 3 invalid CRYPW entered; The Module refuses input of CRYPW for xxx sec. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.222 |
| alarmPeerLink Failure of Internal Link or Link Protocol (could be protocol incompatibility) between Cards in Protection or Regeneration Pair | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.223 |
| alarmPilotReceiveLevelHigh Pilot receive level is high | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.224 |
| alarmLossOfPilotSignal Loss of Pilot Signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.225 |
| alarmPayloadMismatchGfp GFP Payload Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.226 |
| alarmPayloadMismatchLowerOrderPath LO-Path Payload Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.227 |
| alarmPayloadMismatchOPU OPU Payload Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.228 |
| alarmPayloadMismatchHigherOrderPath SONET/SDH Path Payload Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.229 |
| alarmUPortFailure Internal U Port Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.23 |
| alarmProvPayloadMismatch Provisioning payload mismatch alarm | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.230 |
| alarmPrbsLossOfSeqSynch PRBS Loss of Sequence Synchronization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.231 |
| alarmPrbsRcvActivated PRBS Receive Activated | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.232 |
| alarmPrbsTrmtActivated PRBS Transmit Activated | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.233 |
| alarmProtectionNotAvailable (Protection Not Available)
In the case of Channel Card Protection: due to unequipped or mismatched partner equipment - sent by active facility.
In the case of HST Channel Protecti… | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.234 |
| alarmPowerSupplyUnitFailure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.235 |
| alarmMaxPowerConsProvModulesToHigh The maximum power consumption of all provisioned equipment exceeds the capability of a single PSU in the shelf. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.236 |
| alarmMaxPowerConsEquipModulesToHigh The maximum power consumption of the installed equipment exceeds the capability of a single PSU in the shelf. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.237 |
| alarmPowerMissing Power Unit Missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.238 |
| alarmRemoteDefectIndicationLine Line / Multiplex Section RDI | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.239 |
| alarmAutoShutdownBlock Auto Shutdown Block | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.24 |
| alarmRemoteDefectIndicationLowerOrderPath LO-Path Remote Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.240 |
| alarmRemoteDefectIndicationHigherOrderPath Path RDI | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.241 |
| transientPmSnapshotEnded Reference value save end | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.242 |
| alarmDcnCommunicationFail The connection to the shelf is dysfunctional or the connection to the module within the shelf is dysfunctional | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.243 |
| alarmNtpForSchedEqlzRequired Scheduled Equalization requires NTP to be enabled | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.244 |
| alarmSignalDegradeOlm Signal Degrade | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.245 |
| alarmSignalDegradeLine Line/Mux Section SD alarm; related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.246 |
| alarmSignalDegradationonLinkVector Signal Degradation on Link Vector. Superseeded by SF-LINK. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.247 |
| alarmSignalDegradeOdu ODU Signal Degrade alarm; Related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.248 |
| alarmSignalDegradeOtu OTU Signal Degrade alarm; related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.249 |
| alarmAutoPowerShutdown Automatic Power Shutdown | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.25 |
| alarmPcsSignalDegrade Pysical Coding Sublayer Signal Degrade alarm; related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.250 |
| alarmSignalDegradeScn Sec/RS signal degrade alarm; related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.251 |
| alarmSignalDegradeOduTcmA Signal Degrade ODU Tandem Connection Monitoring Instance A. Related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.252 |
| alarmSignalDegradeOduTcmB Signal Degrade ODU Tandem Connection Monitoring Instance B. Related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.253 |
| alarmSignalDegradeOduTcmC Signal Degrade ODU Tandem Connection Monitoring Instance C. Related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.254 |
| alarmEncryptionModuleSelfTestFail Noncritical selftest failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.255 |
| alarmEncryptionModuleSelfTestFailCritical Critical selftest failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.256 |
| alarmSignalFailureOnLink Signal Failure on Link | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.257 |
| alarmSignalFailureonLinkVector Signal Fail Link Vector | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.258 |
| alarmSignalFailureOPU This is a very severe signal degradation or loss | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.259 |
| alarmConfOutPowerTransTooHigh TCA - Optical Power Transmitted (output) too high | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.26 |
| alarmServerSignalFailTx Aggregate level failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.260 |
| alarmFacilityDataRateNotSupported The Plug inserted cannot support the actual service provisioned on this card: this is superseded by the above | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.261 |
| transientCryptoSessKeyLifetimeChanged Change of session key lifetime | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.262 |
| alarmLossofSequenceLowerOrderPath LO-Path Loss Of Sequence | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.263 |
| alarmLossofSequenceHigherOrderPath Path Loss Of Sequence | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.264 |
| alarmServerSignalFail All member ports signals have failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.265 |
| alarmServerSignalFailureGfp GFP Server Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.266 |
| alarmServerSignalFailureODU ODU Server Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.267 |
| alarmServerSignalFailurePath SONET/SDH Path Server Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.268 |
| alarmServerSignalFailureSectionRS Section (SONET) / Regeneration Section (SDH) - Server Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.269 |
| alarmConfOutPowerTransTooLow TCA - Optical Power Transmitted (output) too low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.27 |
| transientProtSwToDuplexCompl Switch to Partner Controller complete | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.270 |
| transientProtSwToDuplexFail Switch to Partner Controller failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.271 |
| alarmSwitchToDuplexInhibited Switch-Over to Partner Controller inhibited | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.272 |
| transientProtSwToDuplexStart Switch to Partner Controller started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.273 |
| alarmSwitchFailed Failure to Respond to Switch/Bridge Request within 50 ms | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.274 |
| transientSwResetReload System Restart-RELOAD | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.275 |
| alarmCurrentTooHigh Current Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.276 |
| alarmAttOnReceiverFiberHigherThanMonitor Attenuation Rx Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.277 |
| alarmAttOnReceiverFiberLowerThanMonitor Attenuation Rx Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.278 |
| alarmAttOnTransmitterFiberHigherThanMonitor Attenuation Tx Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.279 |
| alarmOptSignalFailure Optical Power Transmit Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.28 |
| alarmAttOnTransmitterFiberLowerThanMonitor Attenuation Tx Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.280 |
| alarmThres15MinExceededOduBbe Background Block Errors ODU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.281 |
| transientThres1DayExceededOduBbe Background Block Errors ODU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.282 |
| alarmThres15MinExceededOtuBbe Background Block Errors OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.283 |
| transientThres1DayExceededOtuBbe Background Block Errors OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.284 |
| alarmThres15MinExceededOduTcmABbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.285 |
| transientThres1DayExceededOduTcmABbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.286 |
| alarmThres15MinExceededOduTcmBBbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.287 |
| transientThres1DayExceededOduTcmBBbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.288 |
| alarmThres15MinExceededOduTcmCBbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.289 |
| alarmDsbdChannelPowerTooHigh Optical power is not blocked when service is disabled (OPT > -25 dBm). | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.29 |
| transientThres1DayExceededOduTcmCBbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.290 |
| alarmThres15MinExceededFecBERCE Bit error rate before FEC 15 minutes high threshold crossed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.291 |
| transientThres1DayExceededFecBERCE Bit error rate before FEC 1day high threshold crossed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.292 |
| alarmBrPwrRxTooHigh Backreflection Rx too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.293 |
| alarmChromaticDispersionTooHigh Chromatic Dispersion too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.294 |
| alarmChromaticDispersionTooLow Chromatic Dispersion too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.295 |
| alarmDispersionCompensationTooHigh Chromatic Dispersion Compensation too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.296 |
| alarmDispersionCompensationTooLow Chromatic Dispersion Compensation too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.297 |
| alarmThres15MinExceededFecCE FEC Corrected Errors Exceeded 15 Minute Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.298 |
| transientThres1DayExceededFecCE FEC Corrected Errors Exceeded Day Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.299 |
| fspR7StateChangeTrap This trap is sent when an entity state is changed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.3 |
| alarmLossOfSignalCPort Loss of signal on C Port that corresponds to the network VCH via CRS | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.30 |
| alarmCarrierFreqOffsetTooHigh Carrier Frequency Offset too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.300 |
| alarmCarrierFreqOffsetTooLow Carrier Frequency Offset too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.301 |
| alarmThres15MinExceededSonetLineCV Coding Violations Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.302 |
| transientThres1DayExceededSonetLineCV Coding Violations Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.303 |
| alarmThres15MinExceededPhysConvCV Coding Violations Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.304 |
| transientThres1DayExceededPhysConvCV Coding Violations Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.305 |
| alarmThres15MinExceededSonetSectCV Coding Violations Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.306 |
| transientThres1DayExceededSonetSectCV Coding Violations Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.307 |
| alarmThres15MinExceededPhysConvDE Disparity Errors Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.308 |
| transientThres1DayExceededPhysConvDE Disparity Errors Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.309 |
| alarmLossOfSignalNPort Internal N Port Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.31 |
| alarmDifferentialGroupDelayTooHigh Differential Group Delay too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.310 |
| alarmThres15MinExceededFecES Errored Seconds FEC OTU Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.311 |
| transientThres1DayExceededFecES Errored Seconds FEC OTU Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.312 |
| alarmThres15MinExceededSonetLineES Errored Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.313 |
| transientThres1DayExceededSonetLineES Errored Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.314 |
| alarmThres15MinExceededOduES Errored Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.315 |
| transientThres1DayExceededOduES Errored Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.316 |
| alarmThres15MinExceededOtuES Errored Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.317 |
| transientThres1DayExceededOtuES Errored Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.318 |
| alarmThres15MinExceededPhysConvES Errored Seconds Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.319 |
| alarmOutputPowerFault There is no channel output power while the input power for the channel is above the LOS TH and the channel attenuation is set to a valid value. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.32 |
| transientThres1DayExceededPhysConvES Errored Seconds Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.320 |
| alarmThres15MinExceededSonetSectES Errored Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.321 |
| transientThres1DayExceededSonetSectES Errored Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.322 |
| alarmThres15MinExceededOduTcmAES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.323 |
| transientThres1DayExceededOduTcmAES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.324 |
| alarmThres15MinExceededOduTcmBES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.325 |
| transientThres1DayExceededOduTcmBES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.326 |
| alarmThres15MinExceededOduTcmCES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.327 |
| transientThres1DayExceededOduTcmCES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.328 |
| alarmLatencyTooHigh TCA -Round Trip Delay Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.329 |
| alarmEqlzAdjust Channel power adjustment is in progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.33 |
| alarmLatencyTooLow TCA -Round trip delay Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.330 |
| alarmLaserBiasCurrentNormalizedtooHigh TCA - Laser Bias Current Level too High. Fixed threshold has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.331 |
| alarmLocalOscTemperatureTooHigh Rx Laser used for Local Oscillator Temperature High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.332 |
| alarmLocalOscTemperatureTooLow Rx Laser used for Local Oscillator Temperature Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.333 |
| alarmPumpLaser1TempTooHigh TCA - Fixed high threshold of Laser 1 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.334 |
| alarmPumpLaser1TempTooLow TCA - Fixed low threshold of Laser 1 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.335 |
| alarmPumpLaser2TempTooHigh TCA - Fixed high threshold of Laser 2 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.336 |
| alarmPumpLaser2TempTooLow TCA - Fixed low threshold of Laser 2 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.337 |
| alarmPumpLaser3TempTooHigh TCA - Fixed high threshold of Laser 3 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.338 |
| alarmPumpLaser3TempTooLow TCA - Fixed low threshold of Laser 3 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.339 |
| alarmAmpFailure SGEO-AMP is raised at a dependent entity due to an AMP auto shutdown condition at the associated supporting entity. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.34 |
| alarmPumpLaser4TempTooHigh TCA - Fixed high threshold of Laser 4 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.340 |
| alarmPumpLaser4TempTooLow TCA - Fixed low threshold of Laser 4 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.341 |
| alarmOscPwrTooHigh Optical Supervisory Channel Input Power current high threshold crossed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.342 |
| alarmOscPwrTooLow Optical Supervisory Channel Input Power current low threshold crossed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.343 |
| alarmRamanPumpPwrTooHigh TCA - Fixed high threshold of Pump Laser has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.344 |
| alarmRamanPumpPwrTooLow TCA - Fixed low threshold of Pump Power has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.345 |
| alarmRoundTripDelayTooHigh TCA - Round trip delay too high | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.346 |
| alarmRoundTripDelayTooLow TCA -Round trip delay Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.347 |
| alarmThres15MinExceededSonetSectSEFS Severely Errored Framing Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.348 |
| transientThres1DayExceededSonetSectSEFS Severely Errored Framing Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.349 |
| alarmEqptProvMismatch Provisioning incompatible with configuration | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.35 |
| alarmThres15MinExceededFecSES FEC-SES 15Min Exceeded | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.350 |
| transientThres1DayExceededFecSES FEC-SES 1Day Exceeded | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.351 |
| alarmThres15MinExceededSonetLineSES Severely Errored Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.352 |
| transientThres1DayExceededSonetLineSES Severely Errored Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.353 |
| alarmThres15MinExceededOduSES Severely Errored Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.354 |
| transientThres1DayExceededOduSES Severely Errored Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.355 |
| alarmThres15MinExceededOtuSES Severely Errored Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.356 |
| transientThres1DayExceededOtuSES Severely Errored Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.357 |
| alarmThres15MinExceededSonetSectSES Severely Errored Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.358 |
| transientThres1DayExceededSonetSectSES Severely Errored Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.359 |
| alarmBackreflectionTooHigh Backreflection Power too High, at Tx port | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.36 |
| alarmThres15MinExceededOduTcmASES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.360 |
| transientThres1DayExceededOduTcmASES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.361 |
| alarmThres15MinExceededOduTcmBSES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.362 |
| transientThres1DayExceededOduTcmBSES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.363 |
| alarmThres15MinExceededOduTcmCSES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.364 |
| transientThres1DayExceededOduTcmCSES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.365 |
| alarmLogicalLanesSkewTooHigh Skew between logical lanes farthest apart high threshold condition | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.366 |
| alarmSignalToNoiseRatioTooLow Signal-to-Noise Ratio too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.367 |
| alarmSubModuleTempTooHigh Relevant only when ERRFWD=LSROFF. Enables/disables theSubmodule Tempe
possibility to delay turning off the laser.Relevant only when ERRFWD=LSROFF. Enables/disables theSubmodule Te… | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.368 |
| alarmTemperatureTooHigh Temperature Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.369 |
| transientEqlzStart Start of Connection Equalization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.37 |
| alarmTemperatureTooLow Temperature Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.370 |
| alarmThres15MinExceededSonetLineUAS Unavailable Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.371 |
| transientThres1DayExceededSonetLineUAS Unavailable Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.372 |
| alarmThres15MinExceededOduUAS Unavailable Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.373 |
| transientThres1DayExceededOduUAS Unavailable Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.374 |
| alarmThres15MinExceededOtuUAS Unavailable Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.375 |
| transientThres1DayExceededOtuUAS Unavailable Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.376 |
| alarmThres15MinExceededOduTcmAUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.377 |
| transientThres1DayExceededOduTcmAUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.378 |
| alarmThres15MinExceededOduTcmBUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.379 |
| transientEqlzFailed Failure of Connection Equalization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.38 |
| transientThres1DayExceededOduTcmBUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.380 |
| alarmThres15MinExceededOduTcmCUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.381 |
| transientThres1DayExceededOduTcmCUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.382 |
| alarmThres15MinExceededFecUBE FEC Uncorrected Block Error 15 Minute Threshold Exceeded | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.383 |
| transientThres1DayExceededFecUBE FEC Uncorrected Block Error Day Threshold Exceeded | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.384 |
| alarmEncryptionModuleTamperDetected Tamper event on Encryption module | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.385 |
| alarmThermoElectricCoolerEndOfLife TEC End of Life | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.386 |
| alarmInputTIF Telemetry interface alarm. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.387 |
| transientHardwareResetInputTIF Telemetry interface alarm reset by hardware switch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.388 |
| alarmTraceIdentifierMismatchOdu ODU-Trace Identifier Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.389 |
| transientEqlzCompleted Completion of Connection Equalization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.39 |
| alarmTraceIdentifierMismatchOtu OTU-TIM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.390 |
| alarmSectionTraceMismatch Section (SONET) / Regeneration Section (SDH) - Trace Identifier Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.391 |
| alarmTraceIdentifierMismatchOduTcmA Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.392 |
| alarmTraceIdentifierMismatchOduTcmB Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.393 |
| alarmTraceIdentifierMismatchOduTcmC Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.394 |
| alarmTurnupFailed Turnup Operation failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.395 |
| alarmTurnupCondition Turnup Operation in progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.396 |
| alarmUnequippedLowerOrderPath LO-Path Unequipped | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.397 |
| alarmUnequippedHigherOrderPath Path UNEQ | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.398 |
| alarmVoaControlFail The power or attenuation control of OPCM failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.399 |
| fspR7ObjectChangeTrap This trap is sent when an object is changed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.4 |
| transientEqlzRequestDenied Equalization request denied (could not be performed) by enity | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.40 |
| alarmVoltageOutOfRange Voltage Out of Range | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.400 |
| alarmInputVoltageFailure Failure of Input Voltage | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.401 |
| alarmInputVoltageFailurePort1 Failure of Input Voltage port 1 | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.402 |
| alarmInputVoltageFailurePort2 Failure of Input Voltage port 2 | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.403 |
| transientWorkingSwitchedBacktoWorking Working Traffic (ACT) switched back to Working facility from Protection facility automatically: sent by PROTN. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.404 |
| transientWorkingSwitchedtoProtection Working Traffic (ACT) switched from WKG facility to PROTN facility automatically, sent by WKG. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.405 |
| alarmWtrTimerRunning WTR timer is running | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.406 |
| alarmLossOfLaneOtu OTU Loss of Lane Alignment | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.407 |
| alarmLossOfTestSeqSynchOpu Loss of test Sequence Synchronization at OPU layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.408 |
| alarmLossOfMfiOpu Loss of OPU Multiframe Indication for an OPU4 (LOOMFI per G.798) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.409 |
| transientEqlzNotRequired Equalization Null - Not Required - channel(s) are currently equalized | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.41 |
| alarmOosDisabledLckOduTrmt Disablement of Management Access with Transmitter Sending LCK | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.410 |
| alarmConfigurationMismatch configuration mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.411 |
| alarmOduAutoShutdownRxAIS Auto Shutdown (ODU-AIS-RCV) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.412 |
| alarmOduAutoShutdownTxAIS Auto Shutdown (ODU-AIS-TRMT) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.413 |
| alarmOosDisabledLckOduRx Disablement of Management Access with sending LCK-ODU in Rx | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.414 |
| transientBootUpFailed Boot up failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.415 |
| transientBootUpCompleted Boot up completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.416 |
| transientBootUpStarted Boot up started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.417 |
| transientInstallFwpCompleted Installation of FWP completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.418 |
| transientBootUpRejected Boot up rejected | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.419 |
| transientEqlzProcessPassed Equalization Operation completed sucessfully | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.42 |
| alarmThres15MinExceededBbePcs Background Block Errors PCS Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.420 |
| transientThres15DayExceededBbePcs Background Block Errors PCS Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.421 |
| alarmAutoShutdownGAis Auto Shutdown (G-AIS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.422 |
| alarmEquipmentMismatchAllow Equipment Mismatch Allow | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.423 |
| alarmWarmUp Shelf is warming up | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.424 |
| transientFwpInstallStarted Install started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.425 |
| transientFwpInstallFailed Install failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.426 |
| transientFwpInstallCompleted Install completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.427 |
| transientFwpSwitchStarted Switch started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.428 |
| transientFwpSwitchFailed Switch failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.429 |
| transientEqlzProcessWait Eqalization is in progress, User must wait then request equalization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.43 |
| transientFwpSwitchCompleted Switch completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.430 |
| transientFwpSwitchRejected Switch rejected | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.431 |
| alarmNetworkPathRestricted Available network data path are restricted | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.432 |
| transientPathCleanupComplete Network data path cleanup completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.433 |
| alarmVfClientSignalFail GFP Client Signal Fail on virtual Facility | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.434 |
| alarmAutoShutdownVfCSF Automatic Shutdown - Client Signal Fail transmit (LKDO-CSF) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.435 |
| transientPmSnapshotStarted Reference value save start | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.44 |
| transientEqlzAuto Scheduled Equalization resulted in adjustment of VCH | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.45 |
| transientEqlzRamanAdjust Auto equalization for RAMAN adjustment on existing in-service cross-connected VCHs | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.46 |
| alarmFiberConnLos Fiber Connection Loss of Signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.48 |
| alarmFiberConnOptFault Fiber connection transmit optical power failure. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.49 |
| alarmTerminalLoopback Inward Loopback on Interface | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.5 |
| alarmFiberConnInvalid The fiber connection is in violation of the fiber connection rules. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.50 |
| alarmFiberConnMismatch The fiber connection does not match the existing fiber-map in database. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.51 |
| alarmFiberConnCommError Fiber Connection Communications Fault | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.52 |
| alarmFiberConnProtocolFailure Fiber Connection Protocol Fault | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.53 |
| alarmFiberConnDataFailure Fiber Connection Data Fault | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.54 |
| alarmFiberAttenuationHigh Fiber Connection Attenuation High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.55 |
| transientFiberConnStatChange Fiber Connection Status Change | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.56 |
| alarmLaserBiasCurrAbnormal Abnormally High Laser Bias Current Level under the current operating conditions. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.57 |
| alarmFiberConnInvalidTx The fiber connection is in violation of the fiber connection rules. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.58 |
| alarmFiberConnMismatchTx The fiber connection does not match the existing fiber-map in database. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.59 |
| alarmOosDisabled Non-Specific Disablement of Management Access | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.6 |
| alarmFiberAttenuationHighTx Fiber Connection Attenuation High Tx | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.60 |
| alarmLaserFailure Optical Power Transmitted Failure: Laser Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.61 |
| alarmLossOfReceiverClockRecovery Rx Clock Sync Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.62 |
| alarmFiberAttenuationCond Fiber Connection High Fiber Attenuation Condition | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.63 |
| alarmChannelMismatch Channel provisioning incompatible with associated port configuration | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.64 |
| alarmAlarmIndicationSignalLine Alarm Indication Signal Line / Multiplex Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.65 |
| alarmAlarmIndicationSignalLowerOrderPath Alarm Indication Signal Lower Order Path | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.66 |
| alarmAlarmIndicationSignalOdu Alarm Indication Signal ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.67 |
| alarmAlarmIndicationSignalOpu Alarm Indication Signal OPU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.68 |
| alarmAlarmIndicationSignalOtu Alarm Indication Signal OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.69 |
| alarmOosManagement Alarms are logged but not notified, service affecting changes are permitted | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.7 |
| alarmAlarmIndicationSignalHigherOrderPath Alarm Indication Signal Path | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.70 |
| alarmAlarmIndicationSignalOduTcmA Alarm Indication Signal ODU Tandem Connection Monitoring Instance A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.71 |
| alarmAlarmIndicationSignalOduTcmB Alarm Indication Signal ODU Tandem Connection Monitoring Instance B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.72 |
| alarmAlarmIndicationSignalOduTcmC Alarm Indication Signal ODU Tandem Connection Monitoring Instance C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.73 |
| alarmVirtualChannelAis Client Failure Far-end | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.74 |
| alarmAmplifierAbnormal Output of amplifier is abnormal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.75 |
| alarmAutomaticPowerReduction The signal power exceeds the limit | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.76 |
| alarmAutomaticPowerReductionForEyeSafety Output power is automatically reduced to eye safety limit | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.77 |
| transientAlpSettingFinished Setting of alarm severities to Alarm Profile values completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.78 |
| transientAlpSettingStarted Setting of alarm severities to Alarm Profile values started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.79 |
| alarmOosMaintenance Alarms are logged but not notified, service affecting changes and operations are permitted | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.8 |
| alarmApsConfigMismatch Configuration Mismatch between NEND and FEND. Reported by working facility (PATHID==WKG) or protection facility (PATHID==PROTN) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.80 |
| alarmAseLow Pump laser is not switched on because of too low ASE power | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.82 |
| alarmAseTableGenFailLow ASE table generation failed because of too low ASE level | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.83 |
| alarmAseTableGenFailHighBackreflection ASE table generation failed because of too high backreflection | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.84 |
| alarmAseTableGenFailOscMissing ASE table generation failed because OSC is missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.85 |
| alarmAseTableGenFailPilot ASE table generation failed because PILOT is missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.86 |
| alarmAseTableGenFailSignalinput ASE table generation failed because of detected input signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.87 |
| alarmAseTableNotAvailable ASE table not available or invalid | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.88 |
| alarmAseTableGenProgress ASE table is in the build process | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.89 |
| alarmOosAins Automatic In Service | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.9 |
| alarmEncryptionPortAuthPasswdMissing Authentication password missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.90 |
| transientCryptoAuthPasswdChanged Change of Authentication Password | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.91 |
| alarmBackwardDefectIndicationOdu ODU Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.92 |
| alarmBackwardDefectIndicationOtu OTU Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.93 |
| alarmBackwardDefectIndicationOduTcmA ODU Tandem Connection Monitoring A Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.94 |
| alarmBackwardDefectIndicationOduTcmB ODU Tandem Connection Monitoring B Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.95 |
| alarmBackwardDefectIndicationOduTcmC ODU Tandem Connection Monitoring C Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.96 |
| alarmTopologyDataCalculationInProgress Calculation of topology in progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.97 |
| transientDispersionCompFailed Optimization of Chromatic Dispersion Compensation Fail | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.98 |
| alarmDispertionTunningCondition Chromatic Dispersion Compensation In Progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.99 |