opticalMuxDataLayerPmReset

ADVA-FSPR7-MIB · .1.3.6.1.4.1.2544.1.11.7.3.6.1.1.35
MIB view Table view

Object

column r/w ADVA-FSPR7-TC-MIBFspR7PmReset 
Reset data-layer Performance registers

Context

MIB
ADVA-FSPR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.35
Type
column
Access
readwrite
Status
current
Parent
opticalMuxEntry
Table
opticalMuxTable
Siblings
54

Syntax

ADVA-FSPR7-TC-MIBFspR7PmReset
Source
ADVA-FSPR7-TC-MIBFspR7PmReset
Base type
Enumeration

Values & Constraints

Type Values
0undefined
1none
2all
3curr

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
opticalMuxRowStatus
RowStatus object is used to create or delete a row in the table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.1
opticalMuxOpticalSetPoint
Sets the optical power for power equalization in ROADM or for channel power control in OPCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.10
opticalMuxInitiateEqualization
Initiate Equalization
columnADVA-FSPR7-TC-MIBFspR7InitEqualization.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.11
opticalMuxConnectorType
Connector Type
columnADVA-FSPR7-TC-MIBFspR7ConnectorType.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.12
opticalMuxFiberType
Fiber of Optical Interface - Provision, Reference to FIBER__INVENTORY
columnADVA-FSPR7-TC-MIBFspR7OpticalFiberType.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.13
opticalMuxTilt
Change of optical channel power in dB over the complete transmission band
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.14
opticalMuxOscOpticalSetpoint
Sets the OSC optical power
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.15
opticalMuxOffset
Sets the offset for the mean optical power for power equalization in ROADM
column0.1 dB Integer32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.16
opticalMuxSwitchCommand
The switch command action for this facility. A command resulting in a switch event will also cause a change of the facility secondary state and a corresponding condition. Addresse…
columnADVA-FSPR7-TC-MIBFspR7APSCommand.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.17
opticalMuxTransmitChannel
Channel
columnADVA-FSPR7-TC-MIBFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.18
opticalMuxBandProvision
Band Provision. Reference to BAND__INVENTORY.
columnADVA-FSPR7-TC-MIBFspR7OpticalBand.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.19
opticalMuxConnectionType
Connectivity Parameters for Facilities
columnADVA-FSPR7-TC-MIBFspR7TypeConnection.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.2
opticalMuxAlsMode
Determines the reaction in backward direction in response to a LOS on the same Interface: on a Network Interface connected to the DWDM this is a matter of laser safety
columnADVA-FSPR7-TC-MIBFspR7AlsMode.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.20
opticalMuxType
The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload
columnADVA-FSPR7-TC-MIBFspR7InterfaceType.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.21
opticalMuxAttenuationGradient
Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms…
column0.1 dB/min Unsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.22
opticalMuxTransmitWavelength
Wavelength of Optical Interface (unit: nm)
column0.01 nm SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.23
opticalMuxInhibitSwitchToProt
Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch
columnADVA-FSPR7-TC-MIBFspR7YesNo.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.24
opticalMuxTrmtChannel
Derived Transmit optical channel
columnADVA-FSPR7-TC-MIBFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.25
opticalMuxVariableGain
Variable Gain of EDFA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.26
opticalMuxSumTransmited
Sum of Transmitted Optical Channels Provisioned
columnUnsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.27
opticalMuxRcvChannel
Derived Rcv optical channel
columnADVA-FSPR7-TC-MIBFspR7ChannelIdentifier.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.28
opticalMuxAdmin
The Administrative State will be displayed in the GUI with full name values; it will be differently displayed in TL1 syntax according to TL1 display rules. The transaction into th…
columnADVA-FSPR7-TC-MIBFspR7AdminState.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.29
opticalMuxChannelsNumber
Number of channels supported by an entity
columnADVA-FSPR7-TC-MIBFspR7NumberOfChannels.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.3
opticalMuxTimePeriod
NONE - OTDR measurement disabled otherwise the OTDR duration in minutes.
columnADVA-FSPR7-TC-MIBFspR7OtdrPeriod.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.30
opticalMuxSigDegThresReceiver
Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end.
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.31
opticalMuxChannelsProvision
Number of channels supported by an entity
columnADVA-FSPR7-TC-MIBFspR7NumberOfChannels.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.32
opticalMuxAlias
User Applied Descriptor
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.33
opticalMuxChannelSpacing
ITU Grid channel spacing
columnADVA-FSPR7-TC-MIBFspR7ChannelSpacing.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.34
opticalMuxGain
Gain
columnADVA-FSPR7-TC-MIBFspR7Gain.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.36
opticalMuxSignalDirection
Signal Direction
columnADVA-FSPR7-TC-MIBFspR7SignalDirection.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.37
opticalMuxEdfaPwrOut
Optical Output Power Rating - Provision
columnADVA-FSPR7-TC-MIBFspR7EdfaOutputPowerRating.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.38
opticalMuxVoaSetpoint
Sets the optical attenuation of VOA
column0.1 dB Unsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.39
opticalMuxPumpPower
Total raman pump power
column0.2 dBm Integer32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.4
opticalMuxFiberBrand
Brand of fiber present in the fiber plant
columnADVA-FSPR7-TC-MIBFspR7FiberBrand.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.40
opticalMuxStages
Number of Stages
columnADVA-FSPR7-TC-MIBFspR7Stages.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.41
opticalMuxTiltSet
Tilt setting as discrete values versus a range
columnADVA-FSPR7-TC-MIBFspR7TiltSet.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.42
opticalMuxForceFwdAsePilotOn
Force the BWD Raman pilot on to allow building of FWD Raman ASE Table
columnADVA-FSPR7-TC-MIBFspR7LaserForcedOperation.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.43
opticalMuxSecondaryStates
Secondary States
columnADVA-FSPR7-TC-MIBFspR7EntitySecondaryStates.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.44
opticalMuxConnState
Connection State
columnADVA-FSPR7-TC-MIBFspR7ConnectState.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.45
opticalMuxOperState
The Operational State will be displayed on the GUI with full name values; it will be differently displayed in TL1 syntax according to TL1 display rules.
columnADVA-FSPR7-TC-MIBFspR7OperState.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.46
opticalMuxProtectionRole
Path label Working or Protect
columnADVA-FSPR7-TC-MIBFspR7ProtectionRole.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.47
opticalMuxFarEndSigDegThres
Far End Signal Degrade Threshold
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.48
opticalMuxMaxRamanGainMon
Maximum Raman gain monitored from Raman ASE table build data
column0.1 dB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.49
opticalMuxInhibitSwitchToWork
Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch switch to the Pr…
columnADVA-FSPR7-TC-MIBFspR7YesNo.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.5
opticalMuxValidSigTimer
AINS state signal quality soak time remaining until transition to IS.
columnmin Unsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.50
opticalMuxGainRange
EDFA gain range to provision
columnADVA-FSPR7-TC-MIBFspR7GainRange.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.51
opticalMuxPpc
Target output optical power for each channel.
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.52
opticalMuxOffsetHigh
Sets the high level offset for power equalization in CCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.53
opticalMuxOffsetLow
Sets the low level offset for power equalization in CCM
column0.1 dBm Integer32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.54
opticalMuxOptUpdate
This parameter is used to operate/trigger OPT PM update; it triggers the entity to update its current OPT PM value, which can be retrieved via GET function.
columnADVA-FSPR7-TC-MIBFspR7OptUpdate.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.55
opticalMuxForceLaserOn
Laser Forced On
columnADVA-FSPR7-TC-MIBFspR7LaserForcedOperation.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.6
opticalMuxAseTabCreation
ASE Table creation in process
columnADVA-FSPR7-TC-MIBFspR7AseTabOpr.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.7
opticalMuxTransmitFrequency
Frequency of Optical Interface (unit: nm)
column0.01 THz SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.8
opticalMuxMultiplexLevel
Optical Multiplex Level
columnADVA-FSPR7-TC-MIBFspR7OpticalMultiplexLevel.1.3.6.1.4.1.2544.1.11.7.3.6.1.1.9