alarmRemoved

ADVA-FSPR7-MIB · .1.3.6.1.4.1.2544.1.11.7.5.0.10
MIB view Table view

Object

notification 
The equipment has been removed / unplugged / disconnected.
This condition has been determined to be more probable than that below,
which is also supersedes.

Context

MIB
ADVA-FSPR7-MIB
OID
.1.3.6.1.4.1.2544.1.11.7.5.0.10
Type
notification
Status
current
Parent
fspR7Trap
Siblings
441

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fspR7CreationTrap
This trap is sent every time an entity is created.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.1
alarmLossOfCharSync
Unable to syncronise on the characters in the incoming datastream
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.100
fspR7EquipmentInsertedTrap
This trap is sent when an equipment is inserted.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.10001
fspR7EquipmentRemovedTrap
This trap is sent when an equipment is inserted.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.10002
fspR7WriteAccessRequestnotification-.1.3.6.1.4.1.2544.1.11.7.5.0.10010
fspR7WriteAccessGrantednotification-.1.3.6.1.4.1.2544.1.11.7.5.0.10011
fspR7WriteAccessRevokednotification-.1.3.6.1.4.1.2544.1.11.7.5.0.10012
fspR7WriteAccessDeniednotification-.1.3.6.1.4.1.2544.1.11.7.5.0.10013
fspR7WriteAccessTimeoutnotification-.1.3.6.1.4.1.2544.1.11.7.5.0.10014
fspR7WriteAccessRequestTimeoutnotification-.1.3.6.1.4.1.2544.1.11.7.5.0.10015
alarmLossOfCharSyncFromFarEnd
Loss of Character Synchronization from FEND
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.101
transientCryptoAuthPasswdInvalid
A wrong Authentication password was sent with the command
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.102
alarmEncryptionPortEncryptionSwitchOffEnabled
User enabled switching encryption off
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.103
alarmEncryptionModuleCryPasswdMissing
Crypto Officer password missing
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.104
transientCryptoPasswdChanged
Crypto Officer Password Changed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.105
transientCryptoRtf
Encryption settings reset to factory defaults
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.106
alarmEncryptionModuleSelfTestStarted
Encryption selftest running
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.107
alarmEncryptionPortEncryptionSwitchedOff
Encryption switched off
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.108
alarmOpuClientSignalFail
OPU Client Signal Fail
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.109
alarmLossOfSignal
Loss of Signal
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.11
alarmDatabaseMismatch
compare DBACT__FAIL x.y.z in UBR note DBTYPE is retrievable immediately with RTRV-SYS, we do not currently supported a RTRV-COND-SYS
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.110
alarmDatabaseFailure
Database Failure detect by Database Check Routine
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.111
alarmDatabaseNcuMismatch
This parameter indicates a change of NCU Type (NCU<->NCU2E)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.112
alarmDbReplicationIncompleted
DB Replication Incomplete
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.113
alarmDatabaseVersionMismatch
The current DB is newer than required, or not updateable
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.114
alarmXfpDecisionThresSetFailed
Decision threshold setting failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.115
alarmDuplexLinkFailure
Controller Protection Link Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.116
transientFarEndDyingGasp
signal received from far end upon far end power loss
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.117
alarmSingleFanFailure
Fan operation is degraded and needs attention (cleaning, filter replacement or possible fan replacement).
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.118
alarmMultipleFanFailure
Fan is failing or failed and needs replacement.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.119
alarmOptInputPwrReceivedTooLow
Optical Power Rx too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.12
alarmLossOfSignalTransmitter
A Loss of signal has been detected on the FAR-END facility.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.120
transientFarEndChanged
Neighbor Discovery Dectected a Far End Change
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.121
alarmFarEndIpAddressUnknown
Send by active facility. If an FEND IP Address is changed the corresponding NODE-IP cannot be determined by the OSCM
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.122
alarmFarEndCommFailure
The connection to the Far End Optojack plug is dysfunctional
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.123
transientTopologyDataInvalid
Topology Detection Data invalid
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.124
alarmBackupForcedToHalt
Forced Halt
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.125
transientForcedReboot
Forced Reboot
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.126
alarmFacilityForcedOn
Laser or Switch forced ON
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.127
alarmFwdAseTableFailPilot
Force of BWD Raman pilot for FWD ASE Table Build Failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.128
alarmFwdAseTableOnPilot
Force the BWD Raman Pilot on to allow building of FWD Raman ASE Table
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.129
alarmOptInputPwrReceivedTooHigh
Optical Power Rx too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.13
transientCryptoFwpUpdate
A new FWP is installed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.130
alarmEncryptionModuleFwpUpdateEnabled
FWP upgrade is allowed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.131
alarmFwpMismatchDownloadNotServiceAffecting
Firmware Package Mismatch; download will be NOT Service Affecting
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.132
alarmFwpMismatchDownloadServiceAffecting
Firmware Package Mismatch; download will be Service Affecting
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.133
transientCryptoFwpRevChanged
FWP upgrade revision number is changed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.134
alarmGainTiltNotSettable
The nominal tilt and gain values are not settable
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.135
alarmHighBer
More than 16 invalid 64B/66B sync headers within the current 125us period
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.136
alarmReceiverOverloadProtection
Safety condition, protecting the system against too high receive power.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.137
alarmHwInitializing
Hardware is Initializing
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.138
alarmHwOprReachedHT
HW OPR has reached a high thershold and could be damaged
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.139
alarmLaserTemperatureTooHigh
TCA - Fixed high threshold of Laser Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.14
alarmHwDegrade
HW operation is degraded by a HW fault, but traffic is unaffected.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.140
alarmHwFailure
General Hardware Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.141
alarmSwitchtoProtectionInhibited
Protection Switch Inhibited. Switch to PROTN facility Locked Out. Reported by WKG facility. Leads to PSI state.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.142
alarmSwitchtoWorkingInhibited
Protection Release Inhibited. Switch back to WKG facility Locked Out. Reported by PROTN facility. Leads to PRI state.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.143
transientIntrusionRx
Intrusion on the Receiver Fiber based on GRADHT-AT keyword.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.144
transientIntrusionTx
Intrusion on the Receiver Fiber based on GRADHT-AT keyword.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.145
transientEncryptionPortSingleKeyExchgFailed
At least one Key exchange failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.146
transientCryptoKeyExchgFailCondClr
Key exchange fail counter reset
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.147
alarmEncryptionPortKeyInitExchgMissed
The initial successful key exchange has not be completed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.148
alarmEncryptionPortMaxKeyExchgFailuresReachedIs
Maximum Key exchange failure count reached
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.149
alarmLaserTemperatureTooLow
TCA - Fixed low threshold of Laser Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.15
alarmEncryptionPortMaxKeyExchgFailuresReachedOos
Session Key missing
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.150
alarmEncryptionPortKeyExchangedForced
Encryption Key exchanged forced
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.151
alarmLaserOnDelay
Laser in process of turning on
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.152
alarmLockedDefectOdu
ODU Locked
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.153
alarmLockedDefectOduTcmA
Locked Defect ODU TCM Instance A
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.154
alarmLockedDefectOduTcmB
Locked Defect ODU TCM Instance B
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.155
alarmLockedDefectOduTcmC
Locked Defect ODU TCM Instance C
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.156
alarmLinkControlProtocolFailure
Link Control Protocol setup error or timeout
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.157
alarmLinkDown
Failure of External Linkage
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.158
alarmAutoShutdownSendingAisLine
Auto Shutdown (L-AIS)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.159
alarmOptOutputPowerTransTooLow
TCA - Optical Power Transmitted (output) too low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.16
alarmAutoShutdownSendingAisOdu
Auto Shutdown (ODU-AIS)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.160
alarmAutoShutdownSendingAisOpu
Auto Shutdown (OPU-AIS)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.161
alarmClientFailForwarding
Forwarding of Client Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.162
alarmAutoShutdownAls
Auto Shutdown (ALS)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.163
alarmAutoAmpShutdown
Amplifier Auto Shutdown
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.164
alarmAutoShutdownAmpAps
Auto Shutdown on Network Tx fiber due to LOS on Network Rx fiber (AMP-APS enabled)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.165
alarmAseTableBuild
Auto shutdown due to missing ASE table
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.166
alarmAutoShutdownOpuClientSignalFail
Automatic Shutdown - Client Signal Fail transmit (LKDO-CSF)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.167
alarmAutoShutdownSendingEPC
Auto Shutdown (EPC)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.168
alarmAutoShutdownSendingLckOdu
Auto Shutdown (ODU-LCK)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.169
alarmOptOutputPowerTransTooHigh
TCA - Optical Power Transmitted (output) too high
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.17
alarmAutoShutdownSendingOciOdu
Auto Shutdown (ODU-OCI)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.170
alarmAutoShutdownLaserOffDueToErrFwd
Forward ALS
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.171
alarmAutoShutdownTxRxLasersDueToHighTemp
Facility autonomously shut down with Transmitter and Receiver off due to temperature.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.172
alarmLocalFault
Local Fault Sequence ordered_set received by the local PHY
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.173
alarmLocalOscLevelAbnormal
Rx Laser Current Level Abnormal (used for Local Oscillator)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.174
alarmLossOfGfpFrame
GFP LOF
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.175
alarmLossOfFrameMux
Multiplexer Loss of Frame
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.176
alarmLossOfFrameOtu
OTU LOF
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.177
alarmLossOfFrame
Section (SONET) / Regeneration Section (SDH) - Loss of Frame
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.178
alarmLossOfFrameLossOfMultiFrameOdu
ODU LOF/LOM
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.179
alarmAutoShutdownToHighTemp
Facility autonomously shut down with Transmitter off due to temperature.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.18
alarmLossOfLane
Loss of Lane Alignment
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.180
alarmLossofMultiframeLowerOrderPath
LO-Path Loss Of Multiframe Condition
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.181
alarmLossOfMultiFrameOtu
OTU LOM
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.182
alarmLossofMultiframeHigherOrderPath
Path LOM
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.183
alarmLossOfPointerLowerOrderPath
Is this the same as LOF-LP
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.184
alarmLossOfPointerHigherOrderPath
Path LOP
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.185
alarmLosAttProgress
Loss of Signal Attenuation finding in process
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.186
alarmLossOsc
Loss Of OSC
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.187
alarmGfpLossOfClientSig
GFP Loss Of Client Signal
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.188
alarmLoopbackError
A loop in the PPP-IP path is detected
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.189
alarmAutoShutdownToHighTxPwr
Facility Autonomously Shut Down with Transmitter OFF because of excessiv optical Power Transmitted.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.19
alarmFacilityLoopback
External (Line) Loopback on Interface
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.190
alarmLossofTandemConnectionOduTcmA
Loss of Tandem Connection ODU Tandem Connection Monitoring Instane A
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.191
alarmLossofTandemConnectionOduTcmB
Loss of Tandem Connection ODU Tandem Connection Monitoring Instane B
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.192
alarmLossofTandemConnectionOduTcmC
Loss of Tandem Connection ODU Tandem Connection Monitoring Instane C
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.193
alarmMansw
This condition will only be shown on the working entity, meaning the MANSW has switched traffic from the working entity to the protection entity.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.194
transientManualWorkingSwitchedBacktoWorking
Working Traffic (ACT) switched back to WKG facility from PROTN facility manually: sent by PROTN.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.195
transientManualWorkingSwitchedtoProtection
Working Traffic (ACT) switched from Working facility to Protection facility manually: sent by WKG.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.196
alarmEquipmentNotAccepted
The Plug cannot support any of the services provisionable on this card OR the Plug is unrecognizable
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.197
alarmEquipmentNotApproved
The Plug is recognizable to the extent that service support can be determined, but is not approved: this is susperseded by SGEO-RATE
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.198
alarmCapabilityLevelMismatch
Capability level mismatch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.199
fspR7DeletionTrap
This trap is sent every time an entity is destroyed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.2
alarmLaserEndOfLife
End Of Life [laser degrade].
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.20
alarmEquipmentMismatch
The Plug is approved but does not match the specific Plug provisioned: this is superseded by MEA-APPROVE
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.200
alarmEquipmentNotSupportedByPhysicalLayer
Equipment not Support Configured Physical Layer
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.201
alarmMeaSwRevision
Mismatch of SW Revision
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.202
alarmMismatch
Non-Specific Mismatch. Equipment Not Match Provisioned Hardware
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.203
alarmMidstageFault
Out of Service due to Midstage Fault.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.204
alarmMultiplexStructureIdentifierMismatchOPU
Multiplex Structure Identifier Mismatch OPU
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.205
alarmBackupNotResponding
Not Responding
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.206
alarmOpenConnectionIndicationOdu
Open Connection Indication ODU
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.207
alarmOpenConnectionIndicationOduTcmA
Open Connection Indication ODU Tandem Connection Monitoring A
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.208
alarmOpenConnectionIndicationOduTcmB
Open Connection Indication ODU Tandem Connection Monitoring B
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.209
alarmServerSignalFailureVf
Aggregate level failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.21
alarmOpenConnectionIndicationOduTcmC
Open Connection Indication ODU Tandem Connection Monitoring C
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.210
alarmOduTribMsiMismatch
Tributary Port no and ODTU type do not match in provisioned time slots
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.211
alarmTransmitterDisabledOff
Disablement of Management Access with Transmitter OFF
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.212
alarmReceiverDisabled
Disablement of Management Access with Receiver OFF
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.213
alarmOpmAbnormalCondition
OPM condition is abnormal (degraded)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.214
alarmFaultOnOpm
Fault detected on OPM
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.215
alarmThresOptPowerCtrlFailureHigh
Optical Power Control Failure High Threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.216
alarmThresOptPowerCtrlFailureLow
Optical Power Control Failure Low Threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.217
alarmTxPowerLimited
The optical output power reached limit
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.218
alarmOscOpticalPowerControlFailHigh
OSC Optical Power Control Failure High Threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.219
alarmEqualizationProgress
Equalization and countdown in progress
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.22
alarmOscOpticalPowerControlFailLow
OSC Optical Power Control Failure Low Threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.220
alarmOTDRMeasuringinProgressnotification-.1.3.6.1.4.1.2544.1.11.7.5.0.221
alarmEncryptionModuleCryPasswdError
3 invalid CRYPW entered; The Module refuses input of CRYPW for xxx sec.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.222
alarmPeerLink
Failure of Internal Link or Link Protocol (could be protocol incompatibility) between Cards in Protection or Regeneration Pair
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.223
alarmPilotReceiveLevelHigh
Pilot receive level is high
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.224
alarmLossOfPilotSignal
Loss of Pilot Signal
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.225
alarmPayloadMismatchGfp
GFP Payload Mismatch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.226
alarmPayloadMismatchLowerOrderPath
LO-Path Payload Mismatch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.227
alarmPayloadMismatchOPU
OPU Payload Mismatch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.228
alarmPayloadMismatchHigherOrderPath
SONET/SDH Path Payload Mismatch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.229
alarmUPortFailure
Internal U Port Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.23
alarmProvPayloadMismatch
Provisioning payload mismatch alarm
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.230
alarmPrbsLossOfSeqSynch
PRBS Loss of Sequence Synchronization
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.231
alarmPrbsRcvActivated
PRBS Receive Activated
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.232
alarmPrbsTrmtActivated
PRBS Transmit Activated
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.233
alarmProtectionNotAvailable
(Protection Not Available) In the case of Channel Card Protection: due to unequipped or mismatched partner equipment - sent by active facility. In the case of HST Channel Protecti…
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.234
alarmPowerSupplyUnitFailurenotification-.1.3.6.1.4.1.2544.1.11.7.5.0.235
alarmMaxPowerConsProvModulesToHigh
The maximum power consumption of all provisioned equipment exceeds the capability of a single PSU in the shelf.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.236
alarmMaxPowerConsEquipModulesToHigh
The maximum power consumption of the installed equipment exceeds the capability of a single PSU in the shelf.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.237
alarmPowerMissing
Power Unit Missing
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.238
alarmRemoteDefectIndicationLine
Line / Multiplex Section RDI
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.239
alarmAutoShutdownBlock
Auto Shutdown Block
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.24
alarmRemoteDefectIndicationLowerOrderPath
LO-Path Remote Defect Indication
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.240
alarmRemoteDefectIndicationHigherOrderPath
Path RDI
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.241
transientPmSnapshotEnded
Reference value save end
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.242
alarmDcnCommunicationFail
The connection to the shelf is dysfunctional or the connection to the module within the shelf is dysfunctional
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.243
alarmNtpForSchedEqlzRequired
Scheduled Equalization requires NTP to be enabled
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.244
alarmSignalDegradeOlm
Signal Degrade
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.245
alarmSignalDegradeLine
Line/Mux Section SD alarm; related to a configurable threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.246
alarmSignalDegradationonLinkVector
Signal Degradation on Link Vector. Superseeded by SF-LINK.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.247
alarmSignalDegradeOdu
ODU Signal Degrade alarm; Related to a configurable threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.248
alarmSignalDegradeOtu
OTU Signal Degrade alarm; related to a configurable threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.249
alarmAutoPowerShutdown
Automatic Power Shutdown
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.25
alarmPcsSignalDegrade
Pysical Coding Sublayer Signal Degrade alarm; related to a configurable threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.250
alarmSignalDegradeScn
Sec/RS signal degrade alarm; related to a configurable threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.251
alarmSignalDegradeOduTcmA
Signal Degrade ODU Tandem Connection Monitoring Instance A. Related to a configurable threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.252
alarmSignalDegradeOduTcmB
Signal Degrade ODU Tandem Connection Monitoring Instance B. Related to a configurable threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.253
alarmSignalDegradeOduTcmC
Signal Degrade ODU Tandem Connection Monitoring Instance C. Related to a configurable threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.254
alarmEncryptionModuleSelfTestFail
Noncritical selftest failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.255
alarmEncryptionModuleSelfTestFailCritical
Critical selftest failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.256
alarmSignalFailureOnLink
Signal Failure on Link
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.257
alarmSignalFailureonLinkVector
Signal Fail Link Vector
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.258
alarmSignalFailureOPU
This is a very severe signal degradation or loss
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.259
alarmConfOutPowerTransTooHigh
TCA - Optical Power Transmitted (output) too high
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.26
alarmServerSignalFailTx
Aggregate level failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.260
alarmFacilityDataRateNotSupported
The Plug inserted cannot support the actual service provisioned on this card: this is superseded by the above
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.261
transientCryptoSessKeyLifetimeChanged
Change of session key lifetime
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.262
alarmLossofSequenceLowerOrderPath
LO-Path Loss Of Sequence
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.263
alarmLossofSequenceHigherOrderPath
Path Loss Of Sequence
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.264
alarmServerSignalFail
All member ports signals have failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.265
alarmServerSignalFailureGfp
GFP Server Signal Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.266
alarmServerSignalFailureODU
ODU Server Signal Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.267
alarmServerSignalFailurePath
SONET/SDH Path Server Signal Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.268
alarmServerSignalFailureSectionRS
Section (SONET) / Regeneration Section (SDH) - Server Signal Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.269
alarmConfOutPowerTransTooLow
TCA - Optical Power Transmitted (output) too low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.27
transientProtSwToDuplexCompl
Switch to Partner Controller complete
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.270
transientProtSwToDuplexFail
Switch to Partner Controller failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.271
alarmSwitchToDuplexInhibited
Switch-Over to Partner Controller inhibited
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.272
transientProtSwToDuplexStart
Switch to Partner Controller started
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.273
alarmSwitchFailed
Failure to Respond to Switch/Bridge Request within 50 ms
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.274
transientSwResetReload
System Restart-RELOAD
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.275
alarmCurrentTooHigh
Current Too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.276
alarmAttOnReceiverFiberHigherThanMonitor
Attenuation Rx Too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.277
alarmAttOnReceiverFiberLowerThanMonitor
Attenuation Rx Too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.278
alarmAttOnTransmitterFiberHigherThanMonitor
Attenuation Tx Too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.279
alarmOptSignalFailure
Optical Power Transmit Signal Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.28
alarmAttOnTransmitterFiberLowerThanMonitor
Attenuation Tx Too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.280
alarmThres15MinExceededOduBbe
Background Block Errors ODU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.281
transientThres1DayExceededOduBbe
Background Block Errors ODU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.282
alarmThres15MinExceededOtuBbe
Background Block Errors OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.283
transientThres1DayExceededOtuBbe
Background Block Errors OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.284
alarmThres15MinExceededOduTcmABbe
Background Block Errors ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.285
transientThres1DayExceededOduTcmABbe
Background Block Errors ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.286
alarmThres15MinExceededOduTcmBBbe
Background Block Errors ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.287
transientThres1DayExceededOduTcmBBbe
Background Block Errors ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.288
alarmThres15MinExceededOduTcmCBbe
Background Block Errors ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.289
alarmDsbdChannelPowerTooHigh
Optical power is not blocked when service is disabled (OPT > -25 dBm).
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.29
transientThres1DayExceededOduTcmCBbe
Background Block Errors ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.290
alarmThres15MinExceededFecBERCE
Bit error rate before FEC 15 minutes high threshold crossed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.291
transientThres1DayExceededFecBERCE
Bit error rate before FEC 1day high threshold crossed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.292
alarmBrPwrRxTooHigh
Backreflection Rx too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.293
alarmChromaticDispersionTooHigh
Chromatic Dispersion too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.294
alarmChromaticDispersionTooLow
Chromatic Dispersion too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.295
alarmDispersionCompensationTooHigh
Chromatic Dispersion Compensation too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.296
alarmDispersionCompensationTooLow
Chromatic Dispersion Compensation too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.297
alarmThres15MinExceededFecCE
FEC Corrected Errors Exceeded 15 Minute Threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.298
transientThres1DayExceededFecCE
FEC Corrected Errors Exceeded Day Threshold
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.299
fspR7StateChangeTrap
This trap is sent when an entity state is changed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.3
alarmLossOfSignalCPort
Loss of signal on C Port that corresponds to the network VCH via CRS
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.30
alarmCarrierFreqOffsetTooHigh
Carrier Frequency Offset too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.300
alarmCarrierFreqOffsetTooLow
Carrier Frequency Offset too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.301
alarmThres15MinExceededSonetLineCV
Coding Violations Line
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.302
transientThres1DayExceededSonetLineCV
Coding Violations Line
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.303
alarmThres15MinExceededPhysConvCV
Coding Violations Physical Coding Layer
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.304
transientThres1DayExceededPhysConvCV
Coding Violations Physical Coding Layer
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.305
alarmThres15MinExceededSonetSectCV
Coding Violations Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.306
transientThres1DayExceededSonetSectCV
Coding Violations Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.307
alarmThres15MinExceededPhysConvDE
Disparity Errors Physical Coding Layer
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.308
transientThres1DayExceededPhysConvDE
Disparity Errors Physical Coding Layer
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.309
alarmLossOfSignalNPort
Internal N Port Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.31
alarmDifferentialGroupDelayTooHigh
Differential Group Delay too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.310
alarmThres15MinExceededFecES
Errored Seconds FEC OTU Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.311
transientThres1DayExceededFecES
Errored Seconds FEC OTU Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.312
alarmThres15MinExceededSonetLineES
Errored Seconds Line
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.313
transientThres1DayExceededSonetLineES
Errored Seconds Line
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.314
alarmThres15MinExceededOduES
Errored Seconds ODU Path Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.315
transientThres1DayExceededOduES
Errored Seconds ODU Path Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.316
alarmThres15MinExceededOtuES
Errored Seconds OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.317
transientThres1DayExceededOtuES
Errored Seconds OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.318
alarmThres15MinExceededPhysConvES
Errored Seconds Physical Coding Layer
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.319
alarmOutputPowerFault
There is no channel output power while the input power for the channel is above the LOS TH and the channel attenuation is set to a valid value.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.32
transientThres1DayExceededPhysConvES
Errored Seconds Physical Coding Layer
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.320
alarmThres15MinExceededSonetSectES
Errored Seconds Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.321
transientThres1DayExceededSonetSectES
Errored Seconds Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.322
alarmThres15MinExceededOduTcmAES
Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.323
transientThres1DayExceededOduTcmAES
Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.324
alarmThres15MinExceededOduTcmBES
Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.325
transientThres1DayExceededOduTcmBES
Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.326
alarmThres15MinExceededOduTcmCES
Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.327
transientThres1DayExceededOduTcmCES
Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.328
alarmLatencyTooHigh
TCA -Round Trip Delay Too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.329
alarmEqlzAdjust
Channel power adjustment is in progress
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.33
alarmLatencyTooLow
TCA -Round trip delay Too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.330
alarmLaserBiasCurrentNormalizedtooHigh
TCA - Laser Bias Current Level too High. Fixed threshold has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.331
alarmLocalOscTemperatureTooHigh
Rx Laser used for Local Oscillator Temperature High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.332
alarmLocalOscTemperatureTooLow
Rx Laser used for Local Oscillator Temperature Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.333
alarmPumpLaser1TempTooHigh
TCA - Fixed high threshold of Laser 1 Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.334
alarmPumpLaser1TempTooLow
TCA - Fixed low threshold of Laser 1 Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.335
alarmPumpLaser2TempTooHigh
TCA - Fixed high threshold of Laser 2 Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.336
alarmPumpLaser2TempTooLow
TCA - Fixed low threshold of Laser 2 Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.337
alarmPumpLaser3TempTooHigh
TCA - Fixed high threshold of Laser 3 Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.338
alarmPumpLaser3TempTooLow
TCA - Fixed low threshold of Laser 3 Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.339
alarmAmpFailure
SGEO-AMP is raised at a dependent entity due to an AMP auto shutdown condition at the associated supporting entity.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.34
alarmPumpLaser4TempTooHigh
TCA - Fixed high threshold of Laser 4 Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.340
alarmPumpLaser4TempTooLow
TCA - Fixed low threshold of Laser 4 Temperature has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.341
alarmOscPwrTooHigh
Optical Supervisory Channel Input Power current high threshold crossed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.342
alarmOscPwrTooLow
Optical Supervisory Channel Input Power current low threshold crossed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.343
alarmRamanPumpPwrTooHigh
TCA - Fixed high threshold of Pump Laser has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.344
alarmRamanPumpPwrTooLow
TCA - Fixed low threshold of Pump Power has been crossed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.345
alarmRoundTripDelayTooHigh
TCA - Round trip delay too high
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.346
alarmRoundTripDelayTooLow
TCA -Round trip delay Too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.347
alarmThres15MinExceededSonetSectSEFS
Severely Errored Framing Seconds Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.348
transientThres1DayExceededSonetSectSEFS
Severely Errored Framing Seconds Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.349
alarmEqptProvMismatch
Provisioning incompatible with configuration
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.35
alarmThres15MinExceededFecSES
FEC-SES 15Min Exceeded
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.350
transientThres1DayExceededFecSES
FEC-SES 1Day Exceeded
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.351
alarmThres15MinExceededSonetLineSES
Severely Errored Seconds Line
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.352
transientThres1DayExceededSonetLineSES
Severely Errored Seconds Line
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.353
alarmThres15MinExceededOduSES
Severely Errored Seconds ODU Path Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.354
transientThres1DayExceededOduSES
Severely Errored Seconds ODU Path Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.355
alarmThres15MinExceededOtuSES
Severely Errored Seconds OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.356
transientThres1DayExceededOtuSES
Severely Errored Seconds OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.357
alarmThres15MinExceededSonetSectSES
Severely Errored Seconds Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.358
transientThres1DayExceededSonetSectSES
Severely Errored Seconds Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.359
alarmBackreflectionTooHigh
Backreflection Power too High, at Tx port
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.36
alarmThres15MinExceededOduTcmASES
Severely Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.360
transientThres1DayExceededOduTcmASES
Severely Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.361
alarmThres15MinExceededOduTcmBSES
Severely Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.362
transientThres1DayExceededOduTcmBSES
Severely Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.363
alarmThres15MinExceededOduTcmCSES
Severely Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.364
transientThres1DayExceededOduTcmCSES
Severely Errored Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.365
alarmLogicalLanesSkewTooHigh
Skew between logical lanes farthest apart high threshold condition
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.366
alarmSignalToNoiseRatioTooLow
Signal-to-Noise Ratio too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.367
alarmSubModuleTempTooHigh
Relevant only when ERRFWD=LSROFF. Enables/disables theSubmodule Tempe possibility to delay turning off the laser.Relevant only when ERRFWD=LSROFF. Enables/disables theSubmodule Te…
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.368
alarmTemperatureTooHigh
Temperature Too High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.369
transientEqlzStart
Start of Connection Equalization
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.37
alarmTemperatureTooLow
Temperature Too Low
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.370
alarmThres15MinExceededSonetLineUAS
Unavailable Seconds Line
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.371
transientThres1DayExceededSonetLineUAS
Unavailable Seconds Line
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.372
alarmThres15MinExceededOduUAS
Unavailable Seconds ODU Path Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.373
transientThres1DayExceededOduUAS
Unavailable Seconds ODU Path Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.374
alarmThres15MinExceededOtuUAS
Unavailable Seconds OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.375
transientThres1DayExceededOtuUAS
Unavailable Seconds OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.376
alarmThres15MinExceededOduTcmAUAS
Unavailable Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.377
transientThres1DayExceededOduTcmAUAS
Unavailable Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.378
alarmThres15MinExceededOduTcmBUAS
Unavailable Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.379
transientEqlzFailed
Failure of Connection Equalization
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.38
transientThres1DayExceededOduTcmBUAS
Unavailable Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.380
alarmThres15MinExceededOduTcmCUAS
Unavailable Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.381
transientThres1DayExceededOduTcmCUAS
Unavailable Seconds ODU Tandem Connection Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.382
alarmThres15MinExceededFecUBE
FEC Uncorrected Block Error 15 Minute Threshold Exceeded
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.383
transientThres1DayExceededFecUBE
FEC Uncorrected Block Error Day Threshold Exceeded
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.384
alarmEncryptionModuleTamperDetected
Tamper event on Encryption module
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.385
alarmThermoElectricCoolerEndOfLife
TEC End of Life
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.386
alarmInputTIF
Telemetry interface alarm.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.387
transientHardwareResetInputTIF
Telemetry interface alarm reset by hardware switch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.388
alarmTraceIdentifierMismatchOdu
ODU-Trace Identifier Mismatch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.389
transientEqlzCompleted
Completion of Connection Equalization
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.39
alarmTraceIdentifierMismatchOtu
OTU-TIM
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.390
alarmSectionTraceMismatch
Section (SONET) / Regeneration Section (SDH) - Trace Identifier Mismatch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.391
alarmTraceIdentifierMismatchOduTcmA
Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance A
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.392
alarmTraceIdentifierMismatchOduTcmB
Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance B
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.393
alarmTraceIdentifierMismatchOduTcmC
Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance C
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.394
alarmTurnupFailed
Turnup Operation failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.395
alarmTurnupCondition
Turnup Operation in progress
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.396
alarmUnequippedLowerOrderPath
LO-Path Unequipped
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.397
alarmUnequippedHigherOrderPath
Path UNEQ
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.398
alarmVoaControlFail
The power or attenuation control of OPCM failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.399
fspR7ObjectChangeTrap
This trap is sent when an object is changed.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.4
transientEqlzRequestDenied
Equalization request denied (could not be performed) by enity
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.40
alarmVoltageOutOfRange
Voltage Out of Range
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.400
alarmInputVoltageFailure
Failure of Input Voltage
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.401
alarmInputVoltageFailurePort1
Failure of Input Voltage port 1
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.402
alarmInputVoltageFailurePort2
Failure of Input Voltage port 2
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.403
transientWorkingSwitchedBacktoWorking
Working Traffic (ACT) switched back to Working facility from Protection facility automatically: sent by PROTN.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.404
transientWorkingSwitchedtoProtection
Working Traffic (ACT) switched from WKG facility to PROTN facility automatically, sent by WKG.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.405
alarmWtrTimerRunning
WTR timer is running
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.406
alarmLossOfLaneOtu
OTU Loss of Lane Alignment
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.407
alarmLossOfTestSeqSynchOpu
Loss of test Sequence Synchronization at OPU layer
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.408
alarmLossOfMfiOpu
Loss of OPU Multiframe Indication for an OPU4 (LOOMFI per G.798)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.409
transientEqlzNotRequired
Equalization Null - Not Required - channel(s) are currently equalized
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.41
alarmOosDisabledLckOduTrmt
Disablement of Management Access with Transmitter Sending LCK
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.410
alarmConfigurationMismatch
configuration mismatch
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.411
alarmOduAutoShutdownRxAIS
Auto Shutdown (ODU-AIS-RCV)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.412
alarmOduAutoShutdownTxAIS
Auto Shutdown (ODU-AIS-TRMT)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.413
alarmOosDisabledLckOduRx
Disablement of Management Access with sending LCK-ODU in Rx
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.414
transientBootUpFailed
Boot up failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.415
transientBootUpCompleted
Boot up completed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.416
transientBootUpStarted
Boot up started
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.417
transientInstallFwpCompleted
Installation of FWP completed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.418
transientBootUpRejected
Boot up rejected
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.419
transientEqlzProcessPassed
Equalization Operation completed sucessfully
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.42
alarmThres15MinExceededBbePcs
Background Block Errors PCS Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.420
transientThres15DayExceededBbePcs
Background Block Errors PCS Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.421
alarmAutoShutdownGAis
Auto Shutdown (G-AIS)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.422
alarmEquipmentMismatchAllow
Equipment Mismatch Allow
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.423
alarmWarmUp
Shelf is warming up
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.424
transientFwpInstallStarted
Install started
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.425
transientFwpInstallFailed
Install failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.426
transientFwpInstallCompleted
Install completed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.427
transientFwpSwitchStarted
Switch started
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.428
transientFwpSwitchFailed
Switch failed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.429
transientEqlzProcessWait
Eqalization is in progress, User must wait then request equalization
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.43
transientFwpSwitchCompleted
Switch completed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.430
transientFwpSwitchRejected
Switch rejected
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.431
alarmNetworkPathRestricted
Available network data path are restricted
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.432
transientPathCleanupComplete
Network data path cleanup completed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.433
alarmVfClientSignalFail
GFP Client Signal Fail on virtual Facility
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.434
alarmAutoShutdownVfCSF
Automatic Shutdown - Client Signal Fail transmit (LKDO-CSF)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.435
transientPmSnapshotStarted
Reference value save start
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.44
transientEqlzAuto
Scheduled Equalization resulted in adjustment of VCH
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.45
transientEqlzRamanAdjust
Auto equalization for RAMAN adjustment on existing in-service cross-connected VCHs
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.46
alarmFiberConnLos
Fiber Connection Loss of Signal
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.48
alarmFiberConnOptFault
Fiber connection transmit optical power failure.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.49
alarmTerminalLoopback
Inward Loopback on Interface
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.5
alarmFiberConnInvalid
The fiber connection is in violation of the fiber connection rules.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.50
alarmFiberConnMismatch
The fiber connection does not match the existing fiber-map in database.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.51
alarmFiberConnCommError
Fiber Connection Communications Fault
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.52
alarmFiberConnProtocolFailure
Fiber Connection Protocol Fault
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.53
alarmFiberConnDataFailure
Fiber Connection Data Fault
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.54
alarmFiberAttenuationHigh
Fiber Connection Attenuation High
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.55
transientFiberConnStatChange
Fiber Connection Status Change
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.56
alarmLaserBiasCurrAbnormal
Abnormally High Laser Bias Current Level under the current operating conditions.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.57
alarmFiberConnInvalidTx
The fiber connection is in violation of the fiber connection rules.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.58
alarmFiberConnMismatchTx
The fiber connection does not match the existing fiber-map in database.
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.59
alarmOosDisabled
Non-Specific Disablement of Management Access
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.6
alarmFiberAttenuationHighTx
Fiber Connection Attenuation High Tx
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.60
alarmLaserFailure
Optical Power Transmitted Failure: Laser Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.61
alarmLossOfReceiverClockRecovery
Rx Clock Sync Failure
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.62
alarmFiberAttenuationCond
Fiber Connection High Fiber Attenuation Condition
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.63
alarmChannelMismatch
Channel provisioning incompatible with associated port configuration
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.64
alarmAlarmIndicationSignalLine
Alarm Indication Signal Line / Multiplex Section
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.65
alarmAlarmIndicationSignalLowerOrderPath
Alarm Indication Signal Lower Order Path
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.66
alarmAlarmIndicationSignalOdu
Alarm Indication Signal ODU Path Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.67
alarmAlarmIndicationSignalOpu
Alarm Indication Signal OPU Path Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.68
alarmAlarmIndicationSignalOtu
Alarm Indication Signal OTU Section Monitoring
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.69
alarmOosManagement
Alarms are logged but not notified, service affecting changes are permitted
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.7
alarmAlarmIndicationSignalHigherOrderPath
Alarm Indication Signal Path
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.70
alarmAlarmIndicationSignalOduTcmA
Alarm Indication Signal ODU Tandem Connection Monitoring Instance A
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.71
alarmAlarmIndicationSignalOduTcmB
Alarm Indication Signal ODU Tandem Connection Monitoring Instance B
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.72
alarmAlarmIndicationSignalOduTcmC
Alarm Indication Signal ODU Tandem Connection Monitoring Instance C
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.73
alarmVirtualChannelAis
Client Failure Far-end
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.74
alarmAmplifierAbnormal
Output of amplifier is abnormal
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.75
alarmAutomaticPowerReduction
The signal power exceeds the limit
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.76
alarmAutomaticPowerReductionForEyeSafety
Output power is automatically reduced to eye safety limit
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.77
transientAlpSettingFinished
Setting of alarm severities to Alarm Profile values completed
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.78
transientAlpSettingStarted
Setting of alarm severities to Alarm Profile values started
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.79
alarmOosMaintenance
Alarms are logged but not notified, service affecting changes and operations are permitted
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.8
alarmApsConfigMismatch
Configuration Mismatch between NEND and FEND. Reported by working facility (PATHID==WKG) or protection facility (PATHID==PROTN)
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.80
alarmApsProtocolFailure
Protocol Failure between NEND and FEND. Reported by protecting facility (PATHID==PROTN).
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.81
alarmAseLow
Pump laser is not switched on because of too low ASE power
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.82
alarmAseTableGenFailLow
ASE table generation failed because of too low ASE level
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.83
alarmAseTableGenFailHighBackreflection
ASE table generation failed because of too high backreflection
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.84
alarmAseTableGenFailOscMissing
ASE table generation failed because OSC is missing
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.85
alarmAseTableGenFailPilot
ASE table generation failed because PILOT is missing
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.86
alarmAseTableGenFailSignalinput
ASE table generation failed because of detected input signal
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.87
alarmAseTableNotAvailable
ASE table not available or invalid
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.88
alarmAseTableGenProgress
ASE table is in the build process
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.89
alarmOosAins
Automatic In Service
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.9
alarmEncryptionPortAuthPasswdMissing
Authentication password missing
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.90
transientCryptoAuthPasswdChanged
Change of Authentication Password
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.91
alarmBackwardDefectIndicationOdu
ODU Backward Defect Indication
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.92
alarmBackwardDefectIndicationOtu
OTU Backward Defect Indication
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.93
alarmBackwardDefectIndicationOduTcmA
ODU Tandem Connection Monitoring A Backward Defect Indication
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.94
alarmBackwardDefectIndicationOduTcmB
ODU Tandem Connection Monitoring B Backward Defect Indication
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.95
alarmBackwardDefectIndicationOduTcmC
ODU Tandem Connection Monitoring C Backward Defect Indication
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.96
alarmTopologyDataCalculationInProgress
Calculation of topology in progress
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.97
transientDispersionCompFailed
Optimization of Chromatic Dispersion Compensation Fail
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.98
alarmDispertionTunningCondition
Chromatic Dispersion Compensation In Progress
notification-.1.3.6.1.4.1.2544.1.11.7.5.0.99