alarmSubModuleTempTooHigh
ADVA-FSPR7-MIB ·
.1.3.6.1.4.1.2544.1.11.7.5.0.368
Object
notification
Relevant only when ERRFWD=LSROFF. Enables/disables theSubmodule Tempe possibility to delay turning off the laser.Relevant only when ERRFWD=LSROFF. Enables/disables theSubmodule Temperature too High possibility to delay turning off the laser. This applies to the case when turning off the laserrature too High is done as an error forwarding mechanism. This applies to the case when turning off the laser is done as an error forwarding mechanism.
Context
- MIB
- ADVA-FSPR7-MIB
- OID
.1.3.6.1.4.1.2544.1.11.7.5.0.368- Type
- notification
- Status
- current
- Parent
- fspR7Trap
- Siblings
- 441
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fspR7CreationTrap This trap is sent every time an entity is created. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.1 |
| alarmRemoved The equipment has been removed / unplugged / disconnected.
This condition has been determined to be more probable than that below,
which is also supersedes. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10 |
| alarmLossOfCharSync Unable to syncronise on the characters in the incoming datastream | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.100 |
| fspR7EquipmentInsertedTrap This trap is sent when an equipment is inserted. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10001 |
| fspR7EquipmentRemovedTrap This trap is sent when an equipment is inserted. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10002 |
| fspR7WriteAccessRequest | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10010 |
| fspR7WriteAccessGranted | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10011 |
| fspR7WriteAccessRevoked | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10012 |
| fspR7WriteAccessDenied | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10013 |
| fspR7WriteAccessTimeout | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10014 |
| fspR7WriteAccessRequestTimeout | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.10015 |
| alarmLossOfCharSyncFromFarEnd Loss of Character Synchronization from FEND | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.101 |
| transientCryptoAuthPasswdInvalid A wrong Authentication password was sent with the command | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.102 |
| alarmEncryptionPortEncryptionSwitchOffEnabled User enabled switching encryption off | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.103 |
| alarmEncryptionModuleCryPasswdMissing Crypto Officer password missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.104 |
| transientCryptoPasswdChanged Crypto Officer Password Changed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.105 |
| transientCryptoRtf Encryption settings reset to factory defaults | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.106 |
| alarmEncryptionModuleSelfTestStarted Encryption selftest running | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.107 |
| alarmEncryptionPortEncryptionSwitchedOff Encryption switched off | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.108 |
| alarmOpuClientSignalFail OPU Client Signal Fail | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.109 |
| alarmLossOfSignal Loss of Signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.11 |
| alarmDatabaseMismatch compare DBACT__FAIL x.y.z in UBR note DBTYPE is retrievable immediately with RTRV-SYS, we do not currently supported a RTRV-COND-SYS | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.110 |
| alarmDatabaseFailure Database Failure detect by Database Check Routine | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.111 |
| alarmDatabaseNcuMismatch This parameter indicates a change of NCU Type (NCU<->NCU2E) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.112 |
| alarmDbReplicationIncompleted DB Replication Incomplete | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.113 |
| alarmDatabaseVersionMismatch The current DB is newer than required, or not updateable | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.114 |
| alarmXfpDecisionThresSetFailed Decision threshold setting failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.115 |
| alarmDuplexLinkFailure Controller Protection Link Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.116 |
| transientFarEndDyingGasp signal received from far end upon far end power loss | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.117 |
| alarmSingleFanFailure Fan operation is degraded and needs attention (cleaning, filter replacement or possible fan replacement). | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.118 |
| alarmMultipleFanFailure Fan is failing or failed and needs replacement. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.119 |
| alarmOptInputPwrReceivedTooLow Optical Power Rx too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.12 |
| alarmLossOfSignalTransmitter A Loss of signal has been detected on the FAR-END facility. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.120 |
| transientFarEndChanged Neighbor Discovery Dectected a Far End Change | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.121 |
| alarmFarEndIpAddressUnknown Send by active facility. If an FEND IP Address is changed the corresponding NODE-IP cannot be determined by the OSCM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.122 |
| alarmFarEndCommFailure The connection to the Far End Optojack plug is dysfunctional | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.123 |
| transientTopologyDataInvalid Topology Detection Data invalid | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.124 |
| alarmBackupForcedToHalt Forced Halt | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.125 |
| transientForcedReboot Forced Reboot | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.126 |
| alarmFacilityForcedOn Laser or Switch forced ON | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.127 |
| alarmFwdAseTableFailPilot Force of BWD Raman pilot for FWD ASE Table Build Failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.128 |
| alarmFwdAseTableOnPilot Force the BWD Raman Pilot on to allow building of FWD Raman ASE Table | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.129 |
| alarmOptInputPwrReceivedTooHigh Optical Power Rx too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.13 |
| transientCryptoFwpUpdate A new FWP is installed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.130 |
| alarmEncryptionModuleFwpUpdateEnabled FWP upgrade is allowed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.131 |
| alarmFwpMismatchDownloadNotServiceAffecting Firmware Package Mismatch; download will be NOT Service Affecting | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.132 |
| alarmFwpMismatchDownloadServiceAffecting Firmware Package Mismatch; download will be Service Affecting | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.133 |
| transientCryptoFwpRevChanged FWP upgrade revision number is changed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.134 |
| alarmGainTiltNotSettable The nominal tilt and gain values are not settable | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.135 |
| alarmHighBer More than 16 invalid 64B/66B sync headers within the current 125us period | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.136 |
| alarmReceiverOverloadProtection Safety condition, protecting the system against too high receive power. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.137 |
| alarmHwInitializing Hardware is Initializing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.138 |
| alarmHwOprReachedHT HW OPR has reached a high thershold and could be damaged | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.139 |
| alarmLaserTemperatureTooHigh TCA - Fixed high threshold of Laser Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.14 |
| alarmHwDegrade HW operation is degraded by a HW fault, but traffic is unaffected. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.140 |
| alarmHwFailure General Hardware Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.141 |
| alarmSwitchtoProtectionInhibited Protection Switch Inhibited. Switch to PROTN facility Locked Out. Reported by WKG facility. Leads to PSI state. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.142 |
| alarmSwitchtoWorkingInhibited Protection Release Inhibited. Switch back to WKG facility Locked Out. Reported by PROTN facility. Leads to PRI state. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.143 |
| transientIntrusionRx Intrusion on the Receiver Fiber based on GRADHT-AT keyword. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.144 |
| transientIntrusionTx Intrusion on the Receiver Fiber based on GRADHT-AT keyword. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.145 |
| transientEncryptionPortSingleKeyExchgFailed At least one Key exchange failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.146 |
| transientCryptoKeyExchgFailCondClr Key exchange fail counter reset | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.147 |
| alarmEncryptionPortKeyInitExchgMissed The initial successful key exchange has not be completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.148 |
| alarmEncryptionPortMaxKeyExchgFailuresReachedIs Maximum Key exchange failure count reached | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.149 |
| alarmLaserTemperatureTooLow TCA - Fixed low threshold of Laser Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.15 |
| alarmEncryptionPortMaxKeyExchgFailuresReachedOos Session Key missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.150 |
| alarmEncryptionPortKeyExchangedForced Encryption Key exchanged forced | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.151 |
| alarmLaserOnDelay Laser in process of turning on | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.152 |
| alarmLockedDefectOdu ODU Locked | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.153 |
| alarmLockedDefectOduTcmA Locked Defect ODU TCM Instance A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.154 |
| alarmLockedDefectOduTcmB Locked Defect ODU TCM Instance B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.155 |
| alarmLockedDefectOduTcmC Locked Defect ODU TCM Instance C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.156 |
| alarmLinkControlProtocolFailure Link Control Protocol setup error or timeout | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.157 |
| alarmLinkDown Failure of External Linkage | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.158 |
| alarmAutoShutdownSendingAisLine Auto Shutdown (L-AIS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.159 |
| alarmOptOutputPowerTransTooLow TCA - Optical Power Transmitted (output) too low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.16 |
| alarmAutoShutdownSendingAisOdu Auto Shutdown (ODU-AIS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.160 |
| alarmAutoShutdownSendingAisOpu Auto Shutdown (OPU-AIS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.161 |
| alarmClientFailForwarding Forwarding of Client Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.162 |
| alarmAutoShutdownAls Auto Shutdown (ALS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.163 |
| alarmAutoAmpShutdown Amplifier Auto Shutdown | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.164 |
| alarmAutoShutdownAmpAps Auto Shutdown on Network Tx fiber due to LOS on Network Rx fiber (AMP-APS enabled) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.165 |
| alarmAseTableBuild Auto shutdown due to missing ASE table | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.166 |
| alarmAutoShutdownOpuClientSignalFail Automatic Shutdown - Client Signal Fail transmit (LKDO-CSF) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.167 |
| alarmAutoShutdownSendingEPC Auto Shutdown (EPC) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.168 |
| alarmAutoShutdownSendingLckOdu Auto Shutdown (ODU-LCK) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.169 |
| alarmOptOutputPowerTransTooHigh TCA - Optical Power Transmitted (output) too high | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.17 |
| alarmAutoShutdownSendingOciOdu Auto Shutdown (ODU-OCI) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.170 |
| alarmAutoShutdownLaserOffDueToErrFwd Forward ALS | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.171 |
| alarmAutoShutdownTxRxLasersDueToHighTemp Facility autonomously shut down with Transmitter and Receiver off due to temperature. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.172 |
| alarmLocalFault Local Fault Sequence ordered_set received by the local PHY | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.173 |
| alarmLocalOscLevelAbnormal Rx Laser Current Level Abnormal (used for Local Oscillator) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.174 |
| alarmLossOfGfpFrame GFP LOF | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.175 |
| alarmLossOfFrameMux Multiplexer Loss of Frame | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.176 |
| alarmLossOfFrameOtu OTU LOF | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.177 |
| alarmLossOfFrame Section (SONET) / Regeneration Section (SDH) - Loss of Frame | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.178 |
| alarmLossOfFrameLossOfMultiFrameOdu ODU LOF/LOM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.179 |
| alarmAutoShutdownToHighTemp Facility autonomously shut down with Transmitter off due to temperature. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.18 |
| alarmLossOfLane Loss of Lane Alignment | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.180 |
| alarmLossofMultiframeLowerOrderPath LO-Path Loss Of Multiframe Condition | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.181 |
| alarmLossOfMultiFrameOtu OTU LOM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.182 |
| alarmLossofMultiframeHigherOrderPath Path LOM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.183 |
| alarmLossOfPointerLowerOrderPath Is this the same as LOF-LP | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.184 |
| alarmLossOfPointerHigherOrderPath Path LOP | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.185 |
| alarmLosAttProgress Loss of Signal Attenuation finding in process | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.186 |
| alarmLossOsc Loss Of OSC | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.187 |
| alarmGfpLossOfClientSig GFP Loss Of Client Signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.188 |
| alarmLoopbackError A loop in the PPP-IP path is detected | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.189 |
| alarmAutoShutdownToHighTxPwr Facility Autonomously Shut Down with Transmitter OFF because of excessiv optical Power Transmitted. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.19 |
| alarmFacilityLoopback External (Line) Loopback on Interface | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.190 |
| alarmLossofTandemConnectionOduTcmA Loss of Tandem Connection ODU Tandem Connection Monitoring Instane A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.191 |
| alarmLossofTandemConnectionOduTcmB Loss of Tandem Connection ODU Tandem Connection Monitoring Instane B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.192 |
| alarmLossofTandemConnectionOduTcmC Loss of Tandem Connection ODU Tandem Connection Monitoring Instane C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.193 |
| alarmMansw This condition will only be shown on the working entity, meaning the MANSW has switched traffic from the working entity to the protection entity. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.194 |
| transientManualWorkingSwitchedBacktoWorking Working Traffic (ACT) switched back to WKG facility from PROTN facility manually: sent by PROTN. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.195 |
| transientManualWorkingSwitchedtoProtection Working Traffic (ACT) switched from Working facility to Protection facility manually: sent by WKG. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.196 |
| alarmEquipmentNotAccepted The Plug cannot support any of the services provisionable on this card OR the Plug is unrecognizable | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.197 |
| alarmEquipmentNotApproved The Plug is recognizable to the extent that service support can
be determined, but is not approved: this is susperseded by SGEO-RATE | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.198 |
| alarmCapabilityLevelMismatch Capability level mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.199 |
| fspR7DeletionTrap This trap is sent every time an entity is destroyed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.2 |
| alarmLaserEndOfLife End Of Life [laser degrade]. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.20 |
| alarmEquipmentMismatch The Plug is approved but does not match the specific Plug provisioned: this is superseded by MEA-APPROVE | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.200 |
| alarmEquipmentNotSupportedByPhysicalLayer Equipment not Support Configured Physical Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.201 |
| alarmMeaSwRevision Mismatch of SW Revision | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.202 |
| alarmMismatch Non-Specific Mismatch. Equipment Not Match Provisioned Hardware | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.203 |
| alarmMidstageFault Out of Service due to Midstage Fault. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.204 |
| alarmMultiplexStructureIdentifierMismatchOPU Multiplex Structure Identifier Mismatch OPU | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.205 |
| alarmBackupNotResponding Not Responding | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.206 |
| alarmOpenConnectionIndicationOdu Open Connection Indication ODU | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.207 |
| alarmOpenConnectionIndicationOduTcmA Open Connection Indication ODU Tandem Connection Monitoring A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.208 |
| alarmOpenConnectionIndicationOduTcmB Open Connection Indication ODU Tandem Connection Monitoring B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.209 |
| alarmServerSignalFailureVf Aggregate level failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.21 |
| alarmOpenConnectionIndicationOduTcmC Open Connection Indication ODU Tandem Connection Monitoring C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.210 |
| alarmOduTribMsiMismatch Tributary Port no and ODTU type do not match in provisioned time slots | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.211 |
| alarmTransmitterDisabledOff Disablement of Management Access with Transmitter OFF | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.212 |
| alarmReceiverDisabled Disablement of Management Access with Receiver OFF | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.213 |
| alarmOpmAbnormalCondition OPM condition is abnormal (degraded) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.214 |
| alarmFaultOnOpm Fault detected on OPM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.215 |
| alarmThresOptPowerCtrlFailureHigh Optical Power Control Failure High Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.216 |
| alarmThresOptPowerCtrlFailureLow Optical Power Control Failure Low Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.217 |
| alarmTxPowerLimited The optical output power reached limit | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.218 |
| alarmOscOpticalPowerControlFailHigh OSC Optical Power Control Failure High Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.219 |
| alarmEqualizationProgress Equalization and countdown in progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.22 |
| alarmOscOpticalPowerControlFailLow OSC Optical Power Control Failure Low Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.220 |
| alarmOTDRMeasuringinProgress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.221 |
| alarmEncryptionModuleCryPasswdError 3 invalid CRYPW entered; The Module refuses input of CRYPW for xxx sec. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.222 |
| alarmPeerLink Failure of Internal Link or Link Protocol (could be protocol incompatibility) between Cards in Protection or Regeneration Pair | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.223 |
| alarmPilotReceiveLevelHigh Pilot receive level is high | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.224 |
| alarmLossOfPilotSignal Loss of Pilot Signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.225 |
| alarmPayloadMismatchGfp GFP Payload Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.226 |
| alarmPayloadMismatchLowerOrderPath LO-Path Payload Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.227 |
| alarmPayloadMismatchOPU OPU Payload Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.228 |
| alarmPayloadMismatchHigherOrderPath SONET/SDH Path Payload Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.229 |
| alarmUPortFailure Internal U Port Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.23 |
| alarmProvPayloadMismatch Provisioning payload mismatch alarm | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.230 |
| alarmPrbsLossOfSeqSynch PRBS Loss of Sequence Synchronization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.231 |
| alarmPrbsRcvActivated PRBS Receive Activated | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.232 |
| alarmPrbsTrmtActivated PRBS Transmit Activated | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.233 |
| alarmProtectionNotAvailable (Protection Not Available)
In the case of Channel Card Protection: due to unequipped or mismatched partner equipment - sent by active facility.
In the case of HST Channel Protecti… | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.234 |
| alarmPowerSupplyUnitFailure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.235 |
| alarmMaxPowerConsProvModulesToHigh The maximum power consumption of all provisioned equipment exceeds the capability of a single PSU in the shelf. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.236 |
| alarmMaxPowerConsEquipModulesToHigh The maximum power consumption of the installed equipment exceeds the capability of a single PSU in the shelf. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.237 |
| alarmPowerMissing Power Unit Missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.238 |
| alarmRemoteDefectIndicationLine Line / Multiplex Section RDI | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.239 |
| alarmAutoShutdownBlock Auto Shutdown Block | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.24 |
| alarmRemoteDefectIndicationLowerOrderPath LO-Path Remote Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.240 |
| alarmRemoteDefectIndicationHigherOrderPath Path RDI | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.241 |
| transientPmSnapshotEnded Reference value save end | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.242 |
| alarmDcnCommunicationFail The connection to the shelf is dysfunctional or the connection to the module within the shelf is dysfunctional | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.243 |
| alarmNtpForSchedEqlzRequired Scheduled Equalization requires NTP to be enabled | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.244 |
| alarmSignalDegradeOlm Signal Degrade | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.245 |
| alarmSignalDegradeLine Line/Mux Section SD alarm; related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.246 |
| alarmSignalDegradationonLinkVector Signal Degradation on Link Vector. Superseeded by SF-LINK. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.247 |
| alarmSignalDegradeOdu ODU Signal Degrade alarm; Related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.248 |
| alarmSignalDegradeOtu OTU Signal Degrade alarm; related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.249 |
| alarmAutoPowerShutdown Automatic Power Shutdown | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.25 |
| alarmPcsSignalDegrade Pysical Coding Sublayer Signal Degrade alarm; related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.250 |
| alarmSignalDegradeScn Sec/RS signal degrade alarm; related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.251 |
| alarmSignalDegradeOduTcmA Signal Degrade ODU Tandem Connection Monitoring Instance A. Related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.252 |
| alarmSignalDegradeOduTcmB Signal Degrade ODU Tandem Connection Monitoring Instance B. Related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.253 |
| alarmSignalDegradeOduTcmC Signal Degrade ODU Tandem Connection Monitoring Instance C. Related to a configurable threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.254 |
| alarmEncryptionModuleSelfTestFail Noncritical selftest failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.255 |
| alarmEncryptionModuleSelfTestFailCritical Critical selftest failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.256 |
| alarmSignalFailureOnLink Signal Failure on Link | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.257 |
| alarmSignalFailureonLinkVector Signal Fail Link Vector | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.258 |
| alarmSignalFailureOPU This is a very severe signal degradation or loss | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.259 |
| alarmConfOutPowerTransTooHigh TCA - Optical Power Transmitted (output) too high | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.26 |
| alarmServerSignalFailTx Aggregate level failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.260 |
| alarmFacilityDataRateNotSupported The Plug inserted cannot support the actual service provisioned on this card: this is superseded by the above | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.261 |
| transientCryptoSessKeyLifetimeChanged Change of session key lifetime | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.262 |
| alarmLossofSequenceLowerOrderPath LO-Path Loss Of Sequence | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.263 |
| alarmLossofSequenceHigherOrderPath Path Loss Of Sequence | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.264 |
| alarmServerSignalFail All member ports signals have failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.265 |
| alarmServerSignalFailureGfp GFP Server Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.266 |
| alarmServerSignalFailureODU ODU Server Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.267 |
| alarmServerSignalFailurePath SONET/SDH Path Server Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.268 |
| alarmServerSignalFailureSectionRS Section (SONET) / Regeneration Section (SDH) - Server Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.269 |
| alarmConfOutPowerTransTooLow TCA - Optical Power Transmitted (output) too low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.27 |
| transientProtSwToDuplexCompl Switch to Partner Controller complete | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.270 |
| transientProtSwToDuplexFail Switch to Partner Controller failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.271 |
| alarmSwitchToDuplexInhibited Switch-Over to Partner Controller inhibited | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.272 |
| transientProtSwToDuplexStart Switch to Partner Controller started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.273 |
| alarmSwitchFailed Failure to Respond to Switch/Bridge Request within 50 ms | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.274 |
| transientSwResetReload System Restart-RELOAD | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.275 |
| alarmCurrentTooHigh Current Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.276 |
| alarmAttOnReceiverFiberHigherThanMonitor Attenuation Rx Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.277 |
| alarmAttOnReceiverFiberLowerThanMonitor Attenuation Rx Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.278 |
| alarmAttOnTransmitterFiberHigherThanMonitor Attenuation Tx Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.279 |
| alarmOptSignalFailure Optical Power Transmit Signal Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.28 |
| alarmAttOnTransmitterFiberLowerThanMonitor Attenuation Tx Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.280 |
| alarmThres15MinExceededOduBbe Background Block Errors ODU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.281 |
| transientThres1DayExceededOduBbe Background Block Errors ODU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.282 |
| alarmThres15MinExceededOtuBbe Background Block Errors OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.283 |
| transientThres1DayExceededOtuBbe Background Block Errors OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.284 |
| alarmThres15MinExceededOduTcmABbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.285 |
| transientThres1DayExceededOduTcmABbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.286 |
| alarmThres15MinExceededOduTcmBBbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.287 |
| transientThres1DayExceededOduTcmBBbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.288 |
| alarmThres15MinExceededOduTcmCBbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.289 |
| alarmDsbdChannelPowerTooHigh Optical power is not blocked when service is disabled (OPT > -25 dBm). | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.29 |
| transientThres1DayExceededOduTcmCBbe Background Block Errors ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.290 |
| alarmThres15MinExceededFecBERCE Bit error rate before FEC 15 minutes high threshold crossed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.291 |
| transientThres1DayExceededFecBERCE Bit error rate before FEC 1day high threshold crossed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.292 |
| alarmBrPwrRxTooHigh Backreflection Rx too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.293 |
| alarmChromaticDispersionTooHigh Chromatic Dispersion too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.294 |
| alarmChromaticDispersionTooLow Chromatic Dispersion too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.295 |
| alarmDispersionCompensationTooHigh Chromatic Dispersion Compensation too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.296 |
| alarmDispersionCompensationTooLow Chromatic Dispersion Compensation too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.297 |
| alarmThres15MinExceededFecCE FEC Corrected Errors Exceeded 15 Minute Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.298 |
| transientThres1DayExceededFecCE FEC Corrected Errors Exceeded Day Threshold | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.299 |
| fspR7StateChangeTrap This trap is sent when an entity state is changed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.3 |
| alarmLossOfSignalCPort Loss of signal on C Port that corresponds to the network VCH via CRS | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.30 |
| alarmCarrierFreqOffsetTooHigh Carrier Frequency Offset too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.300 |
| alarmCarrierFreqOffsetTooLow Carrier Frequency Offset too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.301 |
| alarmThres15MinExceededSonetLineCV Coding Violations Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.302 |
| transientThres1DayExceededSonetLineCV Coding Violations Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.303 |
| alarmThres15MinExceededPhysConvCV Coding Violations Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.304 |
| transientThres1DayExceededPhysConvCV Coding Violations Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.305 |
| alarmThres15MinExceededSonetSectCV Coding Violations Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.306 |
| transientThres1DayExceededSonetSectCV Coding Violations Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.307 |
| alarmThres15MinExceededPhysConvDE Disparity Errors Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.308 |
| transientThres1DayExceededPhysConvDE Disparity Errors Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.309 |
| alarmLossOfSignalNPort Internal N Port Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.31 |
| alarmDifferentialGroupDelayTooHigh Differential Group Delay too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.310 |
| alarmThres15MinExceededFecES Errored Seconds FEC OTU Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.311 |
| transientThres1DayExceededFecES Errored Seconds FEC OTU Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.312 |
| alarmThres15MinExceededSonetLineES Errored Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.313 |
| transientThres1DayExceededSonetLineES Errored Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.314 |
| alarmThres15MinExceededOduES Errored Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.315 |
| transientThres1DayExceededOduES Errored Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.316 |
| alarmThres15MinExceededOtuES Errored Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.317 |
| transientThres1DayExceededOtuES Errored Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.318 |
| alarmThres15MinExceededPhysConvES Errored Seconds Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.319 |
| alarmOutputPowerFault There is no channel output power while the input power for the channel is above the LOS TH and the channel attenuation is set to a valid value. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.32 |
| transientThres1DayExceededPhysConvES Errored Seconds Physical Coding Layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.320 |
| alarmThres15MinExceededSonetSectES Errored Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.321 |
| transientThres1DayExceededSonetSectES Errored Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.322 |
| alarmThres15MinExceededOduTcmAES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.323 |
| transientThres1DayExceededOduTcmAES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.324 |
| alarmThres15MinExceededOduTcmBES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.325 |
| transientThres1DayExceededOduTcmBES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.326 |
| alarmThres15MinExceededOduTcmCES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.327 |
| transientThres1DayExceededOduTcmCES Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.328 |
| alarmLatencyTooHigh TCA -Round Trip Delay Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.329 |
| alarmEqlzAdjust Channel power adjustment is in progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.33 |
| alarmLatencyTooLow TCA -Round trip delay Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.330 |
| alarmLaserBiasCurrentNormalizedtooHigh TCA - Laser Bias Current Level too High. Fixed threshold has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.331 |
| alarmLocalOscTemperatureTooHigh Rx Laser used for Local Oscillator Temperature High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.332 |
| alarmLocalOscTemperatureTooLow Rx Laser used for Local Oscillator Temperature Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.333 |
| alarmPumpLaser1TempTooHigh TCA - Fixed high threshold of Laser 1 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.334 |
| alarmPumpLaser1TempTooLow TCA - Fixed low threshold of Laser 1 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.335 |
| alarmPumpLaser2TempTooHigh TCA - Fixed high threshold of Laser 2 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.336 |
| alarmPumpLaser2TempTooLow TCA - Fixed low threshold of Laser 2 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.337 |
| alarmPumpLaser3TempTooHigh TCA - Fixed high threshold of Laser 3 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.338 |
| alarmPumpLaser3TempTooLow TCA - Fixed low threshold of Laser 3 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.339 |
| alarmAmpFailure SGEO-AMP is raised at a dependent entity due to an AMP auto shutdown condition at the associated supporting entity. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.34 |
| alarmPumpLaser4TempTooHigh TCA - Fixed high threshold of Laser 4 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.340 |
| alarmPumpLaser4TempTooLow TCA - Fixed low threshold of Laser 4 Temperature has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.341 |
| alarmOscPwrTooHigh Optical Supervisory Channel Input Power current high threshold crossed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.342 |
| alarmOscPwrTooLow Optical Supervisory Channel Input Power current low threshold crossed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.343 |
| alarmRamanPumpPwrTooHigh TCA - Fixed high threshold of Pump Laser has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.344 |
| alarmRamanPumpPwrTooLow TCA - Fixed low threshold of Pump Power has been crossed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.345 |
| alarmRoundTripDelayTooHigh TCA - Round trip delay too high | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.346 |
| alarmRoundTripDelayTooLow TCA -Round trip delay Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.347 |
| alarmThres15MinExceededSonetSectSEFS Severely Errored Framing Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.348 |
| transientThres1DayExceededSonetSectSEFS Severely Errored Framing Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.349 |
| alarmEqptProvMismatch Provisioning incompatible with configuration | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.35 |
| alarmThres15MinExceededFecSES FEC-SES 15Min Exceeded | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.350 |
| transientThres1DayExceededFecSES FEC-SES 1Day Exceeded | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.351 |
| alarmThres15MinExceededSonetLineSES Severely Errored Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.352 |
| transientThres1DayExceededSonetLineSES Severely Errored Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.353 |
| alarmThres15MinExceededOduSES Severely Errored Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.354 |
| transientThres1DayExceededOduSES Severely Errored Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.355 |
| alarmThres15MinExceededOtuSES Severely Errored Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.356 |
| transientThres1DayExceededOtuSES Severely Errored Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.357 |
| alarmThres15MinExceededSonetSectSES Severely Errored Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.358 |
| transientThres1DayExceededSonetSectSES Severely Errored Seconds Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.359 |
| alarmBackreflectionTooHigh Backreflection Power too High, at Tx port | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.36 |
| alarmThres15MinExceededOduTcmASES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.360 |
| transientThres1DayExceededOduTcmASES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.361 |
| alarmThres15MinExceededOduTcmBSES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.362 |
| transientThres1DayExceededOduTcmBSES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.363 |
| alarmThres15MinExceededOduTcmCSES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.364 |
| transientThres1DayExceededOduTcmCSES Severely Errored Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.365 |
| alarmLogicalLanesSkewTooHigh Skew between logical lanes farthest apart high threshold condition | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.366 |
| alarmSignalToNoiseRatioTooLow Signal-to-Noise Ratio too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.367 |
| alarmTemperatureTooHigh Temperature Too High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.369 |
| transientEqlzStart Start of Connection Equalization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.37 |
| alarmTemperatureTooLow Temperature Too Low | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.370 |
| alarmThres15MinExceededSonetLineUAS Unavailable Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.371 |
| transientThres1DayExceededSonetLineUAS Unavailable Seconds Line | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.372 |
| alarmThres15MinExceededOduUAS Unavailable Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.373 |
| transientThres1DayExceededOduUAS Unavailable Seconds ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.374 |
| alarmThres15MinExceededOtuUAS Unavailable Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.375 |
| transientThres1DayExceededOtuUAS Unavailable Seconds OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.376 |
| alarmThres15MinExceededOduTcmAUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.377 |
| transientThres1DayExceededOduTcmAUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.378 |
| alarmThres15MinExceededOduTcmBUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.379 |
| transientEqlzFailed Failure of Connection Equalization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.38 |
| transientThres1DayExceededOduTcmBUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.380 |
| alarmThres15MinExceededOduTcmCUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.381 |
| transientThres1DayExceededOduTcmCUAS Unavailable Seconds ODU Tandem Connection Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.382 |
| alarmThres15MinExceededFecUBE FEC Uncorrected Block Error 15 Minute Threshold Exceeded | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.383 |
| transientThres1DayExceededFecUBE FEC Uncorrected Block Error Day Threshold Exceeded | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.384 |
| alarmEncryptionModuleTamperDetected Tamper event on Encryption module | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.385 |
| alarmThermoElectricCoolerEndOfLife TEC End of Life | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.386 |
| alarmInputTIF Telemetry interface alarm. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.387 |
| transientHardwareResetInputTIF Telemetry interface alarm reset by hardware switch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.388 |
| alarmTraceIdentifierMismatchOdu ODU-Trace Identifier Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.389 |
| transientEqlzCompleted Completion of Connection Equalization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.39 |
| alarmTraceIdentifierMismatchOtu OTU-TIM | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.390 |
| alarmSectionTraceMismatch Section (SONET) / Regeneration Section (SDH) - Trace Identifier Mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.391 |
| alarmTraceIdentifierMismatchOduTcmA Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.392 |
| alarmTraceIdentifierMismatchOduTcmB Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.393 |
| alarmTraceIdentifierMismatchOduTcmC Trace Identifier Mismatch of ODU Tandem Connection Monitoring Instance C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.394 |
| alarmTurnupFailed Turnup Operation failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.395 |
| alarmTurnupCondition Turnup Operation in progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.396 |
| alarmUnequippedLowerOrderPath LO-Path Unequipped | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.397 |
| alarmUnequippedHigherOrderPath Path UNEQ | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.398 |
| alarmVoaControlFail The power or attenuation control of OPCM failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.399 |
| fspR7ObjectChangeTrap This trap is sent when an object is changed. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.4 |
| transientEqlzRequestDenied Equalization request denied (could not be performed) by enity | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.40 |
| alarmVoltageOutOfRange Voltage Out of Range | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.400 |
| alarmInputVoltageFailure Failure of Input Voltage | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.401 |
| alarmInputVoltageFailurePort1 Failure of Input Voltage port 1 | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.402 |
| alarmInputVoltageFailurePort2 Failure of Input Voltage port 2 | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.403 |
| transientWorkingSwitchedBacktoWorking Working Traffic (ACT) switched back to Working facility from Protection facility automatically: sent by PROTN. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.404 |
| transientWorkingSwitchedtoProtection Working Traffic (ACT) switched from WKG facility to PROTN facility automatically, sent by WKG. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.405 |
| alarmWtrTimerRunning WTR timer is running | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.406 |
| alarmLossOfLaneOtu OTU Loss of Lane Alignment | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.407 |
| alarmLossOfTestSeqSynchOpu Loss of test Sequence Synchronization at OPU layer | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.408 |
| alarmLossOfMfiOpu Loss of OPU Multiframe Indication for an OPU4 (LOOMFI per G.798) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.409 |
| transientEqlzNotRequired Equalization Null - Not Required - channel(s) are currently equalized | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.41 |
| alarmOosDisabledLckOduTrmt Disablement of Management Access with Transmitter Sending LCK | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.410 |
| alarmConfigurationMismatch configuration mismatch | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.411 |
| alarmOduAutoShutdownRxAIS Auto Shutdown (ODU-AIS-RCV) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.412 |
| alarmOduAutoShutdownTxAIS Auto Shutdown (ODU-AIS-TRMT) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.413 |
| alarmOosDisabledLckOduRx Disablement of Management Access with sending LCK-ODU in Rx | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.414 |
| transientBootUpFailed Boot up failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.415 |
| transientBootUpCompleted Boot up completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.416 |
| transientBootUpStarted Boot up started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.417 |
| transientInstallFwpCompleted Installation of FWP completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.418 |
| transientBootUpRejected Boot up rejected | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.419 |
| transientEqlzProcessPassed Equalization Operation completed sucessfully | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.42 |
| alarmThres15MinExceededBbePcs Background Block Errors PCS Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.420 |
| transientThres15DayExceededBbePcs Background Block Errors PCS Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.421 |
| alarmAutoShutdownGAis Auto Shutdown (G-AIS) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.422 |
| alarmEquipmentMismatchAllow Equipment Mismatch Allow | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.423 |
| alarmWarmUp Shelf is warming up | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.424 |
| transientFwpInstallStarted Install started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.425 |
| transientFwpInstallFailed Install failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.426 |
| transientFwpInstallCompleted Install completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.427 |
| transientFwpSwitchStarted Switch started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.428 |
| transientFwpSwitchFailed Switch failed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.429 |
| transientEqlzProcessWait Eqalization is in progress, User must wait then request equalization | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.43 |
| transientFwpSwitchCompleted Switch completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.430 |
| transientFwpSwitchRejected Switch rejected | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.431 |
| alarmNetworkPathRestricted Available network data path are restricted | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.432 |
| transientPathCleanupComplete Network data path cleanup completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.433 |
| alarmVfClientSignalFail GFP Client Signal Fail on virtual Facility | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.434 |
| alarmAutoShutdownVfCSF Automatic Shutdown - Client Signal Fail transmit (LKDO-CSF) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.435 |
| transientPmSnapshotStarted Reference value save start | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.44 |
| transientEqlzAuto Scheduled Equalization resulted in adjustment of VCH | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.45 |
| transientEqlzRamanAdjust Auto equalization for RAMAN adjustment on existing in-service cross-connected VCHs | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.46 |
| alarmFiberConnLos Fiber Connection Loss of Signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.48 |
| alarmFiberConnOptFault Fiber connection transmit optical power failure. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.49 |
| alarmTerminalLoopback Inward Loopback on Interface | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.5 |
| alarmFiberConnInvalid The fiber connection is in violation of the fiber connection rules. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.50 |
| alarmFiberConnMismatch The fiber connection does not match the existing fiber-map in database. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.51 |
| alarmFiberConnCommError Fiber Connection Communications Fault | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.52 |
| alarmFiberConnProtocolFailure Fiber Connection Protocol Fault | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.53 |
| alarmFiberConnDataFailure Fiber Connection Data Fault | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.54 |
| alarmFiberAttenuationHigh Fiber Connection Attenuation High | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.55 |
| transientFiberConnStatChange Fiber Connection Status Change | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.56 |
| alarmLaserBiasCurrAbnormal Abnormally High Laser Bias Current Level under the current operating conditions. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.57 |
| alarmFiberConnInvalidTx The fiber connection is in violation of the fiber connection rules. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.58 |
| alarmFiberConnMismatchTx The fiber connection does not match the existing fiber-map in database. | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.59 |
| alarmOosDisabled Non-Specific Disablement of Management Access | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.6 |
| alarmFiberAttenuationHighTx Fiber Connection Attenuation High Tx | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.60 |
| alarmLaserFailure Optical Power Transmitted Failure: Laser Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.61 |
| alarmLossOfReceiverClockRecovery Rx Clock Sync Failure | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.62 |
| alarmFiberAttenuationCond Fiber Connection High Fiber Attenuation Condition | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.63 |
| alarmChannelMismatch Channel provisioning incompatible with associated port configuration | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.64 |
| alarmAlarmIndicationSignalLine Alarm Indication Signal Line / Multiplex Section | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.65 |
| alarmAlarmIndicationSignalLowerOrderPath Alarm Indication Signal Lower Order Path | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.66 |
| alarmAlarmIndicationSignalOdu Alarm Indication Signal ODU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.67 |
| alarmAlarmIndicationSignalOpu Alarm Indication Signal OPU Path Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.68 |
| alarmAlarmIndicationSignalOtu Alarm Indication Signal OTU Section Monitoring | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.69 |
| alarmOosManagement Alarms are logged but not notified, service affecting changes are permitted | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.7 |
| alarmAlarmIndicationSignalHigherOrderPath Alarm Indication Signal Path | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.70 |
| alarmAlarmIndicationSignalOduTcmA Alarm Indication Signal ODU Tandem Connection Monitoring Instance A | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.71 |
| alarmAlarmIndicationSignalOduTcmB Alarm Indication Signal ODU Tandem Connection Monitoring Instance B | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.72 |
| alarmAlarmIndicationSignalOduTcmC Alarm Indication Signal ODU Tandem Connection Monitoring Instance C | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.73 |
| alarmVirtualChannelAis Client Failure Far-end | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.74 |
| alarmAmplifierAbnormal Output of amplifier is abnormal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.75 |
| alarmAutomaticPowerReduction The signal power exceeds the limit | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.76 |
| alarmAutomaticPowerReductionForEyeSafety Output power is automatically reduced to eye safety limit | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.77 |
| transientAlpSettingFinished Setting of alarm severities to Alarm Profile values completed | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.78 |
| transientAlpSettingStarted Setting of alarm severities to Alarm Profile values started | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.79 |
| alarmOosMaintenance Alarms are logged but not notified, service affecting changes and operations are permitted | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.8 |
| alarmApsConfigMismatch Configuration Mismatch between NEND and FEND. Reported by working facility (PATHID==WKG) or protection facility (PATHID==PROTN) | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.80 |
| alarmApsProtocolFailure Protocol Failure between NEND and FEND. Reported by protecting facility (PATHID==PROTN). | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.81 |
| alarmAseLow Pump laser is not switched on because of too low ASE power | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.82 |
| alarmAseTableGenFailLow ASE table generation failed because of too low ASE level | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.83 |
| alarmAseTableGenFailHighBackreflection ASE table generation failed because of too high backreflection | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.84 |
| alarmAseTableGenFailOscMissing ASE table generation failed because OSC is missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.85 |
| alarmAseTableGenFailPilot ASE table generation failed because PILOT is missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.86 |
| alarmAseTableGenFailSignalinput ASE table generation failed because of detected input signal | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.87 |
| alarmAseTableNotAvailable ASE table not available or invalid | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.88 |
| alarmAseTableGenProgress ASE table is in the build process | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.89 |
| alarmOosAins Automatic In Service | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.9 |
| alarmEncryptionPortAuthPasswdMissing Authentication password missing | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.90 |
| transientCryptoAuthPasswdChanged Change of Authentication Password | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.91 |
| alarmBackwardDefectIndicationOdu ODU Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.92 |
| alarmBackwardDefectIndicationOtu OTU Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.93 |
| alarmBackwardDefectIndicationOduTcmA ODU Tandem Connection Monitoring A Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.94 |
| alarmBackwardDefectIndicationOduTcmB ODU Tandem Connection Monitoring B Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.95 |
| alarmBackwardDefectIndicationOduTcmC ODU Tandem Connection Monitoring C Backward Defect Indication | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.96 |
| alarmTopologyDataCalculationInProgress Calculation of topology in progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.97 |
| transientDispersionCompFailed Optimization of Chromatic Dispersion Compensation Fail | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.98 |
| alarmDispertionTunningCondition Chromatic Dispersion Compensation In Progress | notification | - | .1.3.6.1.4.1.2544.1.11.7.5.0.99 |