LAN-EMULATION-CLIENT-MIB

        This module defines a portion of the management 
information base (MIB) for managing ATM LAN Emulation
Client nodes.  It is meant to be used in connection with
the AToM MIB and MIB-II / RFC 1573 'ifTable' entries
for each LEC / emulated 802.x network interface.
    
Source file
LAN-EMULATION-CLIENT-MIB
Last revised
Identity
leClientMIB
Base OID
1.3.6.1.4.1.353.5.3.1
Imported Objects
RFC1213-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 enterprises Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString MacAddress RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LAN-EMULATION-CLIENT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LAN-EMULATION-CLIENT-MIB::leClientMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LAN-EMULATION-CLIENT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LAN-EMULATION-CLIENT-MIB::leClientMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (105)
.1.3.6.1.4.1.353.5.3
.1.3.6.1.4.1.353.5.3.1
.1.3.6.1.4.1.353.5.3.1.1
.1.3.6.1.4.1.353.5.3.1.1.1
.1.3.6.1.4.1.353.5.3.1.1.1.1
Integer32
.1.3.6.1.4.1.353.5.3.1.1.1.1.1
framesInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.10
secondsInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.11
.1.3.6.1.4.1.353.5.3.1.1.1.1.12
Integer32
.1.3.6.1.4.1.353.5.3.1.1.1.1.13
secondsInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.14
secondsInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.15
secondsInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.16
secondsInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.17
secondsInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.18
Integer32
.1.3.6.1.4.1.353.5.3.1.1.1.1.19
.1.3.6.1.4.1.353.5.3.1.1.1.1.2
Enumeration
.1.3.6.1.4.1.353.5.3.1.1.1.1.20
cells per secondSNMPv2-SMIInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.21
cells per secondSNMPv2-SMIInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.22
secondsInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.23
lecOwner r/w
OctetString
.1.3.6.1.4.1.353.5.3.1.1.1.1.3
Enumeration
.1.3.6.1.4.1.353.5.3.1.1.1.1.4
.1.3.6.1.4.1.353.5.3.1.1.1.1.5
.1.3.6.1.4.1.353.5.3.1.1.1.1.6
OctetString
.1.3.6.1.4.1.353.5.3.1.1.1.1.7
.1.3.6.1.4.1.353.5.3.1.1.1.1.8
secondsInteger32
.1.3.6.1.4.1.353.5.3.1.1.1.1.9
.1.3.6.1.4.1.353.5.3.1.1.10
.1.3.6.1.4.1.353.5.3.1.1.10.1
Integer32
.1.3.6.1.4.1.353.5.3.1.1.10.1.1
Integer32
.1.3.6.1.4.1.353.5.3.1.1.10.1.2
.1.3.6.1.4.1.353.5.3.1.1.10.1.3
.1.3.6.1.4.1.353.5.3.1.1.10.1.4
.1.3.6.1.4.1.353.5.3.1.1.10.1.5
.1.3.6.1.4.1.353.5.3.1.1.2
.1.3.6.1.4.1.353.5.3.1.1.2.1
.1.3.6.1.4.1.353.5.3.1.1.2.1.1
.1.3.6.1.4.1.353.5.3.1.1.2.1.10
Enumeration
.1.3.6.1.4.1.353.5.3.1.1.2.1.11
.1.3.6.1.4.1.353.5.3.1.1.2.1.12
.1.3.6.1.4.1.353.5.3.1.1.2.1.13
OctetString
.1.3.6.1.4.1.353.5.3.1.1.2.1.14
.1.3.6.1.4.1.353.5.3.1.1.2.1.15
.1.3.6.1.4.1.353.5.3.1.1.2.1.16
.1.3.6.1.4.1.353.5.3.1.1.2.1.2
Integer32
.1.3.6.1.4.1.353.5.3.1.1.2.1.3
.1.3.6.1.4.1.353.5.3.1.1.2.1.4
Enumeration
.1.3.6.1.4.1.353.5.3.1.1.2.1.5
.1.3.6.1.4.1.353.5.3.1.1.2.1.6
Integer32
.1.3.6.1.4.1.353.5.3.1.1.2.1.7
Integer32
.1.3.6.1.4.1.353.5.3.1.1.2.1.8
.1.3.6.1.4.1.353.5.3.1.1.2.1.9
.1.3.6.1.4.1.353.5.3.1.1.3
.1.3.6.1.4.1.353.5.3.1.1.3.1
Integer32
.1.3.6.1.4.1.353.5.3.1.1.3.1.1
.1.3.6.1.4.1.353.5.3.1.1.4
.1.3.6.1.4.1.353.5.3.1.1.4.1
.1.3.6.1.4.1.353.5.3.1.1.4.1.1
.1.3.6.1.4.1.353.5.3.1.1.4.1.2
.1.3.6.1.4.1.353.5.3.1.1.4.1.3
.1.3.6.1.4.1.353.5.3.1.1.4.1.4
.1.3.6.1.4.1.353.5.3.1.1.4.1.5
.1.3.6.1.4.1.353.5.3.1.1.4.1.6
.1.3.6.1.4.1.353.5.3.1.1.4.1.7
.1.3.6.1.4.1.353.5.3.1.1.5
.1.3.6.1.4.1.353.5.3.1.1.5.1
.1.3.6.1.4.1.353.5.3.1.1.5.1.1
.1.3.6.1.4.1.353.5.3.1.1.5.1.10
.1.3.6.1.4.1.353.5.3.1.1.5.1.11
.1.3.6.1.4.1.353.5.3.1.1.5.1.12
.1.3.6.1.4.1.353.5.3.1.1.5.1.13
.1.3.6.1.4.1.353.5.3.1.1.5.1.14
.1.3.6.1.4.1.353.5.3.1.1.5.1.15
.1.3.6.1.4.1.353.5.3.1.1.5.1.2
.1.3.6.1.4.1.353.5.3.1.1.5.1.3
.1.3.6.1.4.1.353.5.3.1.1.5.1.4
.1.3.6.1.4.1.353.5.3.1.1.5.1.5
.1.3.6.1.4.1.353.5.3.1.1.5.1.6
.1.3.6.1.4.1.353.5.3.1.1.5.1.7
.1.3.6.1.4.1.353.5.3.1.1.5.1.8
.1.3.6.1.4.1.353.5.3.1.1.5.1.9
.1.3.6.1.4.1.353.5.3.1.1.6
.1.3.6.1.4.1.353.5.3.1.1.6.1
.1.3.6.1.4.1.353.5.3.1.1.6.1.1
.1.3.6.1.4.1.353.5.3.1.1.6.1.2
.1.3.6.1.4.1.353.5.3.1.1.7
.1.3.6.1.4.1.353.5.3.1.1.7.1
.1.3.6.1.4.1.353.5.3.1.1.7.1.1
.1.3.6.1.4.1.353.5.3.1.1.7.1.2
.1.3.6.1.4.1.353.5.3.1.1.8
.1.3.6.1.4.1.353.5.3.1.1.8.1
Integer32
.1.3.6.1.4.1.353.5.3.1.1.8.1.1
Integer32
.1.3.6.1.4.1.353.5.3.1.1.8.1.2
.1.3.6.1.4.1.353.5.3.1.1.8.1.3
.1.3.6.1.4.1.353.5.3.1.1.9
.1.3.6.1.4.1.353.5.3.1.1.9.1
.1.3.6.1.4.1.353.5.3.1.1.9.1.1
.1.3.6.1.4.1.353.5.3.1.1.9.1.2
.1.3.6.1.4.1.353.5.3.1.1.9.1.3
.1.3.6.1.4.1.353.5.3.1.1.9.1.4
.1.3.6.1.4.1.353.5.3.1.1.9.1.5
.1.3.6.1.4.1.353.5.3.1.2
.1.3.6.1.4.1.353.5.3.1.2.1
.1.3.6.1.4.1.353.5.3.1.2.2
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. RFC-1212rfc
  5. RFC1155-SMIrfc
  6. RFC1213-MIBrfc
  7. SNMPv2-CONFrfc
  8. LAN-EMULATION-CLIENT-MIBciscoselected
Type Definitions (9)
OctetString range: 0range: 20
Enumeration
other(1)
learnedViaControl(2)
learnedViaData(3)
staticVolatile(4)
staticNonVolatile(5)
Integer32 range: 0..2147483647
Enumeration
unspecified(1)
aflane8023(2)
aflane8025(3)
Enumeration
unspecified(1)
max1516(2)
max4544(3)
max9234(4)
max18190(5)
Enumeration
initialState(1)
lecsConnect(2)
configure(3)
join(4)
initialRegistration(5)
busConnect(6)
operational(7)
OctetString
Integer32 range: 0..65535
Integer32 range: 0..255
Conformance Groups (10)
A collection of objects used for creating and
configuring LAN Emulation Clients.
.1.3.6.1.4.1.353.5.3.1.2.1.1
A collection of objects describing the status
and operational parameters of the managed LAN
Emulation Clients.
.1.3.6.1.4.1.353.5.3.1.2.1.2
A collection of objects which map a LAN Emulation
Client's 'ifIndex' to its 'lecIndex'.
.1.3.6.1.4.1.353.5.3.1.2.1.3
A collection of objects which act as an extension
to the lecConfigTable.

These objects provide statistics on LAN Emulation
control traffic and SVC establishment.
.1.3.6.1.4.1.353.5.3.1.2.1.4
A collection of objects which act as an extension
to the lecConfigTable.

These objects identify Configuration Direct,
Control, and Multicast VCCs for each client,
making it easier to locate their entries in the
AToM MIB.
.1.3.6.1.4.1.353.5.3.1.2.1.5
A collection of objects which describe all of the
ATM addresses belonging to each client.
.1.3.6.1.4.1.353.5.3.1.2.1.6
A collection of objects which describe all of the
MAC addresses registered for each client.
.1.3.6.1.4.1.353.5.3.1.2.1.7
A collection of objects which describe all of the
Route Descriptors registered for each client.
.1.3.6.1.4.1.353.5.3.1.2.1.8
A collection of objects which describe the MAC-
to-ATM address mappings that this LAN Emulation
Client has learned.
.1.3.6.1.4.1.353.5.3.1.2.1.9
A collection of objects which describe the IEEE
802.5 Route Descriptor-to-ATM address mappings
that this LAN Emulation Client has learned.
.1.3.6.1.4.1.353.5.3.1.2.1.10
Compliance Statements (1)

OID .1.3.6.1.4.1.353.5.3.1.2.2.1
The compliance statement for SNMP entities
which support ATM LAN Emulation Clients.

For a host to conform to this MIB, it must also implement

- RFC 1213 - MIB II.

- Interfaces table entries for each LE Client, as per the
LAN Emulation Client management specification.

- The AToM MIB (RFC 1695 - Definitions of Managed Objects
for ATM Management), according to the conformance
statements defined in that RFC.

Optionally, a host may implement

- RFC 1573 - Evolution of the Interfaces Group of MIB-II.

- The 'ifRcvAddressGroup' from RFC 1573, which provides a
way to represent and configure interfaces with multiple
addresses.

See the LAN Emulation Client management specification for
interpretations of RFC 1573 / MIB-II as they apply to LAN
Emulation Clients.
Required groups
mandatory leClientConfigGroup
mandatory leClientStatusGroup
mandatory leClientMappingGroup
mandatory leClientStatisticsGroup
mandatory leClientServerVccGroup
mandatory leClientAtmAddressesGroup
mandatory leClientMacAddressesGroup
mandatory leClientArpGroup
optional leClientRouteDescriptorsGroup This group is mandatory only for hosts
that support emulated 802.5 LANs.
optional leClientRDArpGroup This group is mandatory only for hosts
that support emulated 802.5 LANs.
Object refinements
ObjectAccessSyntaxDescription
lecRowStatus readonly
Write access is not required.
lecOwner readonly
Write access is not required.
lecConfigMode readonly
Write access is not required.
lecConfigLanType readonly
Write access is not required.

Implementations are not required to
support all legal values.
lecConfigMaxDataFrameSize readonly
Write access is not required.

Implementations are not required to
support all legal values.
lecConfigLanName readonly
Write access is not required.
lecConfigLesAtmAddress readonly
Write access is not required.
lecControlTimeout readonly
Write access is not required.
lecMaxUnknownFrameCount readonly
Write access is not required.
lecMaxUnknownFrameTime readonly
Write access is not required.
lecVccTimeoutPeriod readonly
Write access is not required.
lecMaxRetryCount readonly
Write access is not required.
lecAgingTime readonly
Write access is not required.
lecForwardDelayTime readonly
Write access is not required.
lecExpectedArpResponseTime readonly
Write access is not required.
lecFlushTimeOut readonly
Write access is not required.
lecPathSwitchingDelay readonly
Write access is not required.
lecLocalSegmentID readonly
Write access is not required.
lecMulticastSendType readonly
Write access is not required.
lecMulticastSendAvgRate readonly
Write access is not required.
lecMulticastSendPeakRate readonly
Write access is not required.
lecConnectionCompleteTimer readonly
Write access is not required.
lecAtmAddressStatus readonly
Write access is not required.
leArpAtmAddress readonly
Write access is not required.
leArpEntryType readonly
Write access is not required.
leArpRowStatus readonly
Write access is not required.
leRDArpAtmAddress readonly
Write access is not required.
leRDArpEntryType readonly
Write access is not required.
leRDArpRowStatus readonly
Write access is not required.