ACE2002-MIB Table View

A table.

ethIfEntry row .1.3.6.1.4.1.164.3.1.6.1.1.1

An entry in table.

Indexes

ethIfIdx

Column	Syntax	OID
ethIfIdx A unique index of the ethernet interface/port.	SNMPv2-SMIInteger32 Constraints: range: 1-65535	.1.3.6.1.4.1.164.3.1.6.1.1.1.1
ethMode This object indicates the Ethernet mode of operation.	Enumerationr/w Enumerated Values: 1 halfDuplex 2 fullDuplex 255 notApplicable	.1.3.6.1.4.1.164.3.1.6.1.1.1.2
ethBridgingMode This object indicates the bridging mode of the Ethernet interface.	Enumerationr/w Enumerated Values: 1 filtered 2 transparent	.1.3.6.1.4.1.164.3.1.6.1.1.1.3
ethEncapsulationCRCMode This object define the encapsulation type requested for the Ethernet interface. It indicates if we transfer the Ethernet frame to the other side with or without the CRC.	Enumerationr/w Enumerated Values: 1 notApplicable 2 withCRC 3 withoutCRC	.1.3.6.1.4.1.164.3.1.6.1.1.1.4
ethBackPressure This parameter defines whether to enable or disable Back pressure. Back Pressure is a flow control parameter.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable	.1.3.6.1.4.1.164.3.1.6.1.1.1.5
ethLimit4 This parameter determine the Back off algorithm mode. Every 4 following collisions the Framer will be thrown out (4 times more than usuall).	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable	.1.3.6.1.4.1.164.3.1.6.1.1.1.6
ethSkipInitReset This parameter defines whether read status on reset.	Enumerationr/w Enumerated Values: 1 notApplicable 2 notSkip 3 skip	.1.3.6.1.4.1.164.3.1.6.1.1.1.7
ethMulticastBlock This parameter defines whether to send multicast message to WAN from LAN or not.	Enumerationr/w Enumerated Values: 1 notApplicable 2 unBlock 3 block	.1.3.6.1.4.1.164.3.1.6.1.1.1.8
ethBroadcastBlock This parameter defines whether to send broadcast message to WAN from LAN or not.	Enumerationr/w Enumerated Values: 1 notApplicable 2 unBlock 3 block Constraints: range: 1-1000000	.1.3.6.1.4.1.164.3.1.6.1.1.1.9
ethSpeed This parameter defines the line speed.	Enumerationr/w Enumerated Values: 1 notApplicable 2 s10Mbps 3 s100Mbps	.1.3.6.1.4.1.164.3.1.6.1.1.1.10
ethRip2 This parameter defines whether to send RIP II message to WAN from LAN or not	Enumerationr/w Enumerated Values: 1 notApplicable 2 no 3 yes Constraints: range: 0-86400	.1.3.6.1.4.1.164.3.1.6.1.1.1.11
ethPortPriority This parameter defines if priority is to be considered for this Port.	Enumerationr/w Enumerated Values: 1 notApplicable 2 none 3 fixed	.1.3.6.1.4.1.164.3.1.6.1.1.1.12
ethPortMngEnable This parameter defines whether management data can pass through this Port.	Enumerationr/w Enumerated Values: 1 notApplicable 2 no 3 yes	.1.3.6.1.4.1.164.3.1.6.1.1.1.13
ethFlowCtrlMacAddress In case of flow control - transmit frame with this specific MAC address to inform the other end to stop sending frames. Default: 01.80.C2.00.00.01.	MacAddressr/w Type Constraints: range: 6	.1.3.6.1.4.1.164.3.1.6.1.1.1.14

The Ethernet Current table.

ethIfCurrentEntry row .1.3.6.1.4.1.164.3.1.6.1.2.1.1

An entry in the Ethernet Current table.

Indexes

ethIfCurrentIndex

Column	Syntax	OID
ethIfCurrentIndex The index of the Ethernet interface. It may be ifIndex.	SNMPv2-SMIInteger32 Constraints: range: 35-35	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.1
ethIfCurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: range: 4-4 range: 35-35	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.2
ethIfCurrentInFrames The counter associated with the number of received frames, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.3
ethIfCurrentInOctets The counter associated with the number of received octets, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.4
ethIfCurrentAlignmentErrors The counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encountered by the Ethernet interface in the current 15 minute int…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.5
ethIfCurrentFCSErrors The counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.6
ethIfCurrentLengthError The counter associated with the number of received frames with length error, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.7
ethIfCurrentOutFrames The counter associated with the number of transmitted frames, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-65535	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.8
ethIfCurrentOutOctets The counter associated with the number of transmitted octets, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 2-15	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.9
ethIfCurrentSingleCollisionFrames The counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.10
ethIfCurrentMultipleCollisionFrames The counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.11
ethIfCurrentDeferredTransmissions The counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-65535	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.12
ethIfCurrentLateCollisions The counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 2-15	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.13
ethIfCurrentCarrierSenseErrors The counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.14
ethIfCurrentInputCongestionDropped The counter associated with the number of frames dropped due to lack of buffers in ingress pool, encountered by the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.15
ethIfCurrentOutputCongestionDropped The counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-65535	.1.3.6.1.4.1.164.3.1.6.1.2.1.1.16

The Ethernet Interval table.

ethIfIntervalEntry row .1.3.6.1.4.1.164.3.1.6.1.2.2.1

An entry in the Ethernet Interval table.

Indexes

ethIfIntervalIndex ethIfIntervalNumber

Column	Syntax	OID
ethIfIntervalIndex The index of the Ethernet interface. It may be ifIndex.	SNMPv2-SMIInteger32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.1
ethIfIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals exist).	Integer32 Constraints: range: 1-96 range: 0-65535	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.2
ethIfIntervalStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: range: 4-4 range: 2-15	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.3
ethIfIntervalInFrames The counter associated with the number of received frames, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.4
ethIfIntervalInOctets The counter associated with the number of received octets, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.5
ethIfIntervalAlignmentErrors The counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encountered by the Ethernet interface in one of the previous 96, i…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.6
ethIfIntervalFCSErrors The counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 50-1000000	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.7
ethIfIntervalLengthError The counter associated with the number of received frames with length error, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 2-1024	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.8
ethIfIntervalOutFrames The counter associated with the number of transmitted frames, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.9
ethIfIntervalOutOctets The counter associated with the number of transmitted octets, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.10
ethIfIntervalSingleCollisionFrames The counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Ethernet interface in one of the previous 96, individual 15 mi…	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.11
ethIfIntervalMultipleCollisionFrames The counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the Ethernet interface in one of the previous 96, individual 15 …	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.12
ethIfIntervalDeferredTransmissions The counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ethernet interface in one of the previous 96, individual 15 mi…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.13
ethIfIntervalLateCollisions The counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, interva…	SNMPv2-SMIGauge32 Constraints: range: 50-1000000	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.14
ethIfIntervalCarrierSenseErrors The counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by the Ethernet interface in one of the previous 96, indivi…	SNMPv2-SMIGauge32 Constraints: range: 2-1024	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.15
ethIfIntervalInputCongestionDropped The counter associated with the number of dropped frames due to a congestion, encountered by the Receive direction to the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.16
ethIfIntervalOutputCongestionDropped The counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.1.2.2.1.17

The Ethernet Performance table.

ethIfPerfEntry row .1.3.6.1.4.1.164.3.1.6.1.2.4.1

An entry in the Ethernet Performance table.

Indexes

ethIfIdx

Column	Syntax	OID
ethIfPerfInOkFrames The counter associated with the number of received OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.1.2.4.1.1
ethIfPerfOutOkFrames The counter associated with the number of transmitted OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done.	SNMPv2-SMIGauge32 Constraints: range: 50-1000000	.1.3.6.1.4.1.164.3.1.6.1.2.4.1.2
ethIfPerfTotalCollisions The counter associated with the total number of collisions of any type encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statistics was done	SNMPv2-SMIGauge32 Constraints: range: 2-1024	.1.3.6.1.4.1.164.3.1.6.1.2.4.1.3

The SONET Medium table.

prtSonetMediumEntry row .1.3.6.1.4.1.164.3.1.6.2.1.1.1

An entry in the SONET Medium table. ifIndex of the
lowest SONET layer of type sonet(39).

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtSonetMediumTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32 Constraints: range: 0-899 range: 0-100	.1.3.6.1.4.1.164.3.1.6.2.1.1.1.1
prtSonetMediumValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Constraints: range: 0-96 range: 0-100	.1.3.6.1.4.1.164.3.1.6.2.1.1.1.2

The SONET Section/Line Current table.

prtSectionLineCurrentEntry row .1.3.6.1.4.1.164.3.1.6.2.1.2.1

An entry in the SONET Section/Line Current table.
ifIndex of the section/line SONET layer of type
sonet(39).

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtSonetCurrentLOS The counter associated with the number of LOS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 2-1024	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.1
prtSonetCurrentLOF The counter associated with the number of LOF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.2
prtSonetCurrentLineAIS The counter associated with the number of Line AIS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.3
prtSonetCurrentLineFERF The counter associated with the number of Line FERF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.4
prtSonetCurrentSectionBIP The counter associated with the number of Section BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-100	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.5
prtSonetCurrentLineBIP The counter associated with the number of Line BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.6
prtSonetCurrentLineFEBE The counter associated with the number of Line FEBE errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.7
prtSonetCurrentUAS The counter associated with the number of UAS encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.8
prtSonetCurrentSES The counter associated with the number of SES encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.9
prtSonetCurrentES The number of Errored Seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.10
prtSonetCurrentStatus The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.11
prtSonetCurrentLSV The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.2.1.12

The Section/Line Interval table.

prtSectionLineIntervalEntry row .1.3.6.1.4.1.164.3.1.6.2.1.3.1

An entry in the SONET Section/Line Interval table.
ifIndex of the section/line SONET layer of type
sonet(39).

Indexes

IF-MIBifIndex prtSonetLineIntervalNumber

Column	Syntax	OID
prtSonetLineIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: range: 1-96 range: 0-65535	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.1
prtSonetIntervalLOS The counter associated with the number of LOS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 1-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.2
prtSonetIntervalLOF The counter associated with the number of LOF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.3
prtSonetIntervalLineAIS The counter associated with the number of Line AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.4
prtSonetIntervalLineFERF The counter associated with the number of Line FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-65535	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.5
prtSonetIntervalSectionBIP The counter associated with the number of Section BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 1-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.6
prtSonetIntervalLineBIP The counter associated with the number of Line BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.7
prtSonetIntervalLineFEBE The counter associated with the number of Line FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.8
prtSonetIntervalUAS The counter associated with the number of UAS encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-65535	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.9
prtSonetIntervalSES The counter associated with the number of SES encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 1-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.10
prtSonetIntervalES The number of Errored Seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.11
prtSonetIntervalStatus The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.	OctetString Constraints: range: 4-4 range: 0-15	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.12
prtSonetIntervalLSV The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-65535	.1.3.6.1.4.1.164.3.1.6.2.1.3.1.13

The SONET Path Current table.

prtPathCurrentEntry row .1.3.6.1.4.1.164.3.1.6.2.1.4.1

An entry in the SONET Path Current table.
ifIndex of the Path SONET layer of type
sonetPath(50).

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtSonetCurrentPathAIS The counter associated with the number of Path AIS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-15	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.1
prtSonetCurrentPathFERF The counter associated with the number of Path FERF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.2
prtSonetCurrentLOP The counter associated with the number LOP seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.3
prtSonetCurrentSLM The counter associated with the number of SLM seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.4
prtSonetCurrentLOC The counter associated with the number of LOC seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.5
prtSonetCurrentPathBIP The counter associated with the number of Path BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.6
prtSonetCurrentPathFEBE The counter associated with the number of Path FEBE errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-150	.1.3.6.1.4.1.164.3.1.6.2.1.4.1.7

The Path Interval table.

prtPathIntervalEntry row .1.3.6.1.4.1.164.3.1.6.2.1.5.1

An entry in the SONET Path Interval table.

Indexes

IF-MIBifIndex prtSonetPathIntervalNumber

Column	Syntax	OID
prtSonetPathIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: range: 1-96 range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.1
prtSonetIntervalPathAIS The counter associated with the number of Path AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.2
prtSonetIntervalPathFERF The counter associated with the number of Path FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-150	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.3
prtSonetIntervalLOP The counter associated with the number of LOP seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-150	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.4
prtSonetIntervalSLM The counter associated with the number of SLM seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.5
prtSonetIntervalLOC The counter associated with the number of LOC seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.6
prtSonetIntervalPathBIP The counter associated with the number of Path BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.7
prtSonetIntervalPathFEBE The counter associated with the number of Path FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-150	.1.3.6.1.4.1.164.3.1.6.2.1.5.1.8

The Virtual Interface Current table.

virtualIfCurrentEntry row .1.3.6.1.4.1.164.3.1.6.2.1.6.1.1

An entry in the Virtual Interface Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
virtualIfCurrentMinActiveVC This object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.	Integer32 Constraints: range: 1-63 range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.1
virtualIfCurrentMaxActiveVC This object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.	Integer32 Constraints: range: 1-63 range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.2
virtualIfCurrentRxFrames This counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in the current 15-minute interval.	SNMPv2-SMICounter64 Constraints: range: 0-150	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.3
virtualIfCurrentTxFrames This counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in the current 15-minute interval.	SNMPv2-SMICounter64 Constraints: range: 0-150	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.4
virtualIfCurrentRxAbortFrames The counter associated with the number of Received Aborted frames encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 0-256	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.5
virtualIfCurrentTxAbortFrames The counter associated with the number of Transmitted Aborted frames encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.6
virtualIfCurrentMinLengthViolation This counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-4	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.7
virtualIfCurrentMaxLengthViolation This counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-500	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.8
virtualIfCurrentFcsError The counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 5-6000	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.9
virtualIfCurrentByteDestuffingViolation The counter associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.10
virtualIfCurrentAdressMismatch The counter associated with the number of Adress Mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.11
virtualIfCurrentControlMismatch The counter associated with the number of Control Mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.12
virtualIfCurrentActiveVC This object holds the number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.13

The Virtual Interface Interval table.

virtualIfIntervalEntry row .1.3.6.1.4.1.164.3.1.6.2.1.6.2.1

An entry in the Virtual Interface Interval table.

Indexes

IF-MIBifIndex virtualIfIntervalNumber

Column	Syntax	OID
virtualIfIntervalNumber A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is …	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.1
virtualIfIntervalMinActiveVC This object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 hours.	Integer32 Constraints: range: 1-64 range: 1-60	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.2
virtualIfIntervalMaxActiveVC This object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 hours.	Integer32 Constraints: range: 1-64 range: 1-10	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.3
virtualIfIntervalRxFrames This counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	SNMPv2-SMICounter64 Constraints: range: 50-200	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.4
virtualIfIntervalTxFrames This counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	SNMPv2-SMICounter64 Constraints: range: 1-60	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.5
virtualIfIntervalRxAbortFrames This counter is associated with the number of Received Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.6
virtualIfIntervalTxAbortFrames This counter is associated with the number of Transmitted Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.7
virtualIfIntervalMinLengthViolation This counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 60-3600	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.8
virtualIfIntervalMaxLengthViolation This counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.9
virtualIfIntervalFcsError This counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.10
virtualIfIntervalByteDestuffingViolation This counter is associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.11
virtualIfIntervalAdressMismatch This counter is associated with the number of Address Mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-6	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.12
virtualIfIntervalControlMismatch This counter is associated with the number of Control mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.13
virtualIfIntervalBelowMinThreshold This counter is associated with the number of seconds that number of active VCs was below minimum threshold defined by vcGroupCnfgNoOfVCs, encountered by Virtual Interface in a particular 15-minute interval in the …	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.14

The Virtual Interface LAPS Current table.

virtualIfLAPSCurrentEntry row .1.3.6.1.4.1.164.3.1.6.2.1.6.3.1

An entry in the Virtual Interface
LAPS Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
virtualIfLAPSCurrentSapiMismatch This counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-60	.1.3.6.1.4.1.164.3.1.6.2.1.6.3.1.1

The Virtual Interface LAPS table.

virtualIfLAPSIntervalEntry row .1.3.6.1.4.1.164.3.1.6.2.1.6.4.1

An entry in the Virtual Interface
LAPS Interval table.

Indexes

IF-MIBifIndex virtualIfIntervalNumber

Column	Syntax	OID
virtualIfLAPSIntervalSapiMismatch This counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.4.1.1

The Virtual Interface LAPF Current table.

virtualIfLAPFCurrentEntry row .1.3.6.1.4.1.164.3.1.6.2.1.6.5.1

An entry in the Virtual Interface
LAPF Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
virtualIfLAPFCurrentNlpidMismatch This counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.1
virtualIfLAPFCurrentOuiMismatch This counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 50-200	.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.2
virtualIfLAPFCurrentPidMismatch This counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.3
virtualIfLAPFCurrentDlciMismatch This counter is associated with the number of received DLCI field mismatch encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 0-63	.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.4
virtualIfLAPFCurrentMacRxFrames This counter is associated with the number of frames received from LAN by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.5
virtualIfLAPFCurrentMacTxFrames This counter is associated with the number of frames transmitted to LAN by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.6

The Virtual Interface LAPF Interval table.

virtualIfLAPFIntervalEntry row .1.3.6.1.4.1.164.3.1.6.2.1.6.6.1

An entry in the Virtual Interface Interval table.

Indexes

IF-MIBifIndex virtualIfIntervalNumber

Column	Syntax	OID
virtualIfLAPFIntervalNlpidMismatch This counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.1
virtualIfLAPFIntervalOuiMismatch This counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 0-127	.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.2
virtualIfLAPFIntervalPidMismatch This counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-65535	.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.3
virtualIfLAPFIntervalDlciMismatch This counter is associated with the number of received DLCI field mismatch by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-60	.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.4
virtualIfLAPFIntervalMacRxFrames This counter is associated with the number of frames received from LAN by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-10	.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.5
virtualIfLAPFIntervalMacTxFrames This counter is associated with the number of frames transmitted to LAN encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.6

The Virtual Interface GFP Current table.

virtualIfGFPCurrentEntry row .1.3.6.1.4.1.164.3.1.6.2.1.6.7.1

An entry in the Virtual Interface
GFP Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
virtualIfGFPCurrentIdleFrameError This counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 0-64	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.1
virtualIfGFPCurrentCHecSbError This counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encountered by a Virtual Interface in the current 15-minute in…	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.2
virtualIfGFPCurrentPtiMismatch This counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client Data or Management frame), encountered by a Virtual Inte…	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 50-200	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.3
virtualIfGFPCurrentExiMismatch This counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or LINEAR modes), encountered by a Virtual Interface in t…	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 0-63	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.4
virtualIfGFPCurrentUpiMismatch This counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 00000001), encountered by a Virtual Interface in th…	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.5
virtualIfGFPCurrentTHecSbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in the current 15-minute int…	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.6
virtualIfGFPCurrentTHecMbError This counter is associated with the number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in the current 15-mi…	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.7
virtualIfGFPCurrentCidMismatch This counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by a Virtual Interface in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.8
virtualIfGFPCurrentEHecSbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in the current 15-min…	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.9
virtualIfGFPCurrentEHecMbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in the current 15-minu…	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-1000	.1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.10

The Virtual Interface GFP Interval table.

virtualIfGFPIntervalEntry row .1.3.6.1.4.1.164.3.1.6.2.1.6.8.1

An entry in the Virtual Interface
GFP Interval table.

Indexes

IF-MIBifIndex virtualIfIntervalNumber

Column	Syntax	OID
virtualIfGFPIntervalIdleFrameError This counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.1
virtualIfGFPIntervalCHecSbError This counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encountered by a Virtual Interface in a particular 15-minute int…	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.2
virtualIfGFPIntervalPtiMismatch This counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client Data or Management frame), encountered by a Virtual Inter…	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.3
virtualIfGFPIntervalExiMismatch This counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or LINEAR modes), encountered by a Virtual Inter…	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.4
virtualIfGFPIntervalUpiMismatch This counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 00000001), encountered by a Virtual Interface in a particular 15…	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.5
virtualIfGFPIntervalTHecSbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in a particular 15-minute inte…	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.6
virtualIfGFPIntervalTHecMbError This counter is associated withthe number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in a particular 15-minute interv…	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.7
virtualIfGFPIntervalCidMismatch This counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by a Virtual Interface in a particular 15-minute interval in …	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-20	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.8
virtualIfGFPIntervalEHecSbError This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in a particula…	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-20	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.9
virtualIfGFPIntervalEHecMbError This counter is associated with the the number of received GFP frames that are detected to only have multi-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in a particular 15-mi…	PerfHist-TC-MIBPerfIntervalCount Constraints: range: 1-20	.1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.10

Sonet/SDH general port configuration table.

prtSonetGenEntry row .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1

An entry in the Sonet/SDH general port configuration table.

Indexes

prtSonetGenCnfgIdx prtSonetGenIdx

Column	Syntax	OID
prtSonetGenCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1
prtSonetGenIdx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2
prtSonetGenSdThreshold SD=Signal Degraded Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 .	Enumerationr/w Enumerated Values: 1 notApplicable 3 n3 4 n4 5 n5 6 n6 7 n7 8 n8 9 n9	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3
prtSonetGenEedThreshold EED=Excessive Error Defect Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 .	Enumerationr/w Enumerated Values: 1 notApplicable 3 n3 4 n4 5 n5 6 n6 7 n7 8 n8 9 n9	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4
prtSonetGenBerEnable Controls the activation of the Line Ber (Bit Error Rate), means whether SD and EED threshold parameters will be enabled.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable Constraints: range: 20-150	.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.5

Sonet/SDH STM-1 port configuration table.

prtSonetStm1Entry row .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1

An entry in the Sonet/SDH STM-1 port configuration table.

Indexes

prtSonetStm1CnfgIdx prtSonetStm1Idx

Column	Syntax	OID
prtSonetStm1CnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32 Constraints: range: 1-255 range: 1-120	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1
prtSonetStm1Idx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Constraints: range: 1-15	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2
prtSonetStm1ClockSrc Clock Source of the STM-1 port. lbt = Loop Back Timing.	Enumerationr/w Enumerated Values: 1 notApplicable 2 internal 3 lbt Constraints: range: 1-15	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3
prtSonetStm1DccMode DCC Mode. DCC=Data Communication Channel. d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section). d1.... d12 enable user to select single DCC byte	Enumerationr/w Enumerated Values: 1 notApplicable 2 none 3 d1ToD3 4 d4ToD12 5 d1 6 d2 7 d3 8 d4 9 d5 10 d6 11 d7 12 d8 13 d9 14 d10 15 d11 16 d12 Constraints: range: 0-50	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4
prtSonetStm1RoutingProt Routing Protocol.	Enumerationr/w Enumerated Values: 1 notApplicable 2 none 3 proprietary 4 rip2 Constraints: range: 0-50	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5
prtSonetStm1MngProt Management Protocol over DCC: Proprietary, PPP or Frame Relay.	Enumerationr/w Enumerated Values: 1 notApplicable 3 proprietary 5 ppp 6 frameRelay	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6
prtSonetStm1OperationalMode Operational Mode. linear - cannot be selected when there is Redundancy between the STM-1 ports.	Enumerationr/w Enumerated Values: 1 notApplicable 2 terminal 3 linear 4 linearProtection	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.7
prtSonetStm1VoiceChannel This parameter enable user to select whether voice channel will be transferred using E1 byte, E2 Byte, or not at all.	Enumerationr/w Enumerated Values: 1 notApplicable 2 none 3 e1Byte 4 e2Byte	.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.8

Sonet/SDH VC port configuration table.

prtSonetVcEntry row .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1

An entry in the Sonet/SDH VC port configuration table.

Indexes

prtSonetVcCnfgIdx prtSonetVcIdx

Column	Syntax	OID
prtSonetVcCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1
prtSonetVcIdx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2
prtSonetVcJTxPathTraceEnable Enable/Disable Transmitting Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3
prtSonetVcJRxPathTraceEnable Enable/Disable checking Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable Constraints: range: 5-35	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4
prtSonetVcJPathTrace Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'.	OctetStringr/w Constraints: range: 0-16 range: 5-35	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5
prtSonetVcConnect Connect VCn (n - 11,12,2,3,4) port (yes/no).	Enumerationr/w Enumerated Values: 1 notApplicable 2 no 3 yes	.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6

The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).

prtSonetTuEntry row .1.3.6.1.4.1.164.3.1.6.2.2.3.2.1

An entry in table.

Indexes

prtSonetTuCnfgIdx prtSonetTuPrtIdx prtSonetTuIdx prtSonetTuConPrtIdx

Column	Syntax	OID
prtSonetTuCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1
prtSonetTuPrtIdx This object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Constraints: range: 1-120	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2
prtSonetTuIdx This object indicates a unique TU (Tributary Unit) within VC-4. The valid TUs are 1..63.	SNMPv2-SMIInteger32 Constraints: range: 1-120	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3
prtSonetTuConPrtIdx This object indicates the connected port, when prtSonetTuType=connect. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be indicated as 100.	SNMPv2-SMIInteger32 Constraints: range: 1-120	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4
prtSonetTuType The type of TU (Tributary Unit). connect - connected to one of the E1 ports. bypass - bypassed to the other VC4 port. TUs that are not connected or bypassed, will not exist in this table.	Enumerationr/w Enumerated Values: 2 connect 3 bypass Constraints: range: 1-120	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5
prtSonetTuMode TU Mode of connection. addAndDrop - Add & Drop add - Add (TU receives from the E1 ports).	Enumerationr/w Enumerated Values: 1 notApplicable 2 addAndDrop 3 add Constraints: range: 1-75	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6
prtSonetTuRowStatus Creation/Deletion of rows in the table.	SNMPv2-TCRowStatusr/w Constraints: range: 1-75 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7

The Virtual Concatenation Group configuration table.

vcGroupCnfgEntry row .1.3.6.1.4.1.164.3.1.6.2.2.4.1.1

An entry in the Virtual Concatenation Group
configuration table.

Indexes

vcGroupCnfgIdx vcGroupCnfgNumber

Column	Syntax	OID
vcGroupCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32 Constraints: range: 1-255 range: 0-86400	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.1
vcGroupCnfgNumber Virtual Concatenation Group Number. For FCD=155 up to four groups are defined valid values are 1..4	SNMPv2-SMIInteger32 Constraints: range: 0-3600	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.2
vcGroupCnfgRowStatus Creation/Deletion of rows in the table.	SNMPv2-TCRowStatusr/w Constraints: range: 1-64 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.3
vcGroupCnfgVcType User may select type of SDH Virtual Containers (VC) (SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. For SDH, values 2,3,4 are valid. For SONET, values 5 and 6 are valid.	Enumerationr/w Enumerated Values: 1 notApplicable 2 vc12 3 vc3 4 vc4 5 vt1dot5 6 sts1 Constraints: range: 1-64	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.4
vcGroupCnfgNoOfVCs User may select number of Virtual Containers (VC) (SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. Valid range for this number depends on type VC selected by vcGroupCnfgVCType F…	Integer32r/w Constraints: range: 0-84	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.5
vcGroupCnfgLCAS This object controls Link Capacity Adjustment Scheme (LCAS) activation.	Enumerationr/w Enumerated Values: 1 notApplicable 2 lcasNotActive 3 lcasActive	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.6
vcGroupCnfgEncapsulation This object enables user to select encapsulation method.	Enumerationr/w Enumerated Values: 1 notApplicable 2 laps 3 lapf 4 gfp	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.7
vcGroupCnfgGroupIfIndex The ifIndex assigend to this group.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.8
vcGroupCnfgRip2 This object controls RIP 2. User may select to send RIP 2 message over selected group or not	Enumerationr/w Enumerated Values: 1 notApplicable 2 no 3 yes Constraints: range: 30-10080	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.9
vcGroupCnfgGfpChId Generic Framing Procedure (GFP) Channel ID, Valid only when vcGroupCnfgEncapsulation = gfp (4) Valid values are 0x00 - oxFF (hex)	Integer32r/w Constraints: range: 0-255 range: 32-32	.1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.10

The Virtual Concatenation Group GFP Mux configuration table.

vcgGfpMuxCnfgEntry row .1.3.6.1.4.1.164.3.1.6.2.2.4.2.1

An entry in the Virtual Concatenation Group GFP Mux
configuration table.

Indexes

vcgGfpMuxCnfgIdx vcgGfpMuxCnfgMuxNumber

Column	Syntax	OID
vcgGfpMuxCnfgIdx This object indicates the Index of the configuration being accessed. Index of 255 relates to the Temporary (Scratch) coninguration. For products that support several configurations, Set can be performed only to the Temp…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.1
vcgGfpMuxCnfgMuxNumber Virtual Concatenation Group GFP Mux Number. For FCD=155 up to 2 GFP muxes can be created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.2
vcgGfpMuxCnfgRowStatus Creation/Deletion of rows in the table.	SNMPv2-TCRowStatusr/w Constraints: range: 1-8192 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.3
vcgGfpMuxCnfgMuxName Virtual Concatenation Group, GFP Mux name.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.4
vcgGfpMuxCnfgPrimeGroup Index of Virtual Concatenation Group used as Primary for the GFP mux created for FCD 155 four Virtual Concatenation Group are defined: 1 -> Virtual Concatenation Group 1 2 -> Virtual Concatenation Group 2 3 -> Virt…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.5
vcgGfpMuxCnfgGrpBwAlloc This object indicates the allocated bandwidth (BW) to each Virtual Concatenation Group (VCG). Each nibble indicates BW percentage, in 12.5% steps, assigned to a group. For FCD-155, there are 4 VCGs. …	OctetStringr/w	.1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.6

The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).

prtSonetXConnectEntry row .1.3.6.1.4.1.164.3.1.6.2.3.1.1

An entry in table.

Indexes

prtSonetXConnectCnfgIdx prtSonetXConnectPrtIdx prtSonetXConnectConPrtIdx prtSonetXConnectAUGIdx prtSonetXConnectTUG3Idx prtSonetXConnectTUG2Idx prtSonetXConnectTUnIdx

Column	Syntax	OID
prtSonetXConnectCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.1
prtSonetXConnectPrtIdx This object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.2
prtSonetXConnectConPrtIdx This object indicates the connected port. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be indicated as 255.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.3
prtSonetXConnectAUGIdx This object indicates an AUG (Administrative Unit Group) within STM-N. The valid AUGs values are: 1 for STM-1 1...4 for STM-4, 1..16 for STM-16 and 1..64 for STM-64 (STM-64) 255 designates NA.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.4
prtSonetXConnectTUG3Idx This object indicates a TUG-3 (Tributary Unit Group 3) within VC-4. The valid TUG3s are values are 1..3. and 255 which designates NA	SNMPv2-SMIInteger32 Constraints: range: 1-65535	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.5
prtSonetXConnectTUG2Idx This object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3. The valid TUG2's values are 1..7 and 255 which designates NA	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.6
prtSonetXConnectTUnIdx This object indicates a TUn within TUG-2 or TUG-3 (Tributary Unit n, where n is 2, 12 or 11 within TUG-2, or 3 within TUG-3) valid values are 1 for TU-2 1 for TU-3 1..4 for TU-11 1..3 for TU-12 …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.7
prtSonetXConnectRowStatus Creation/Deletion of rows in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.8
prtSonetXConnectDirection TU direction of connection. rx=Drop tx=Add both = Add & Drop	Enumerationr/w Enumerated Values: 1 notApplicable 2 rx 3 tx 4 both	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.9
prtSonetXConnectTuNumber This object indicates which TU is used in prtSonetXConnectTUnIdx	Enumerationr/w Enumerated Values: 1 notApplicable 2 tu2 3 tu3 4 tu11 5 tu12	.1.3.6.1.4.1.164.3.1.6.2.3.1.1.10

The DS3 interface table.

prtDs3IfEntry row .1.3.6.1.4.1.164.3.1.6.3.1.1.1

An entry in the DS3 interface table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtDs3IfTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32 Constraints: range: 0-899	.1.3.6.1.4.1.164.3.1.6.3.1.1.1.1
prtDs3IfValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.164.3.1.6.3.1.1.1.2

The DS3 Current table.

prtDs3CurrentEntry row .1.3.6.1.4.1.164.3.1.6.3.1.2.1

An entry in the DS3 Current table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtDs3CurrentLOS The counter associated with the number of LOS seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.1
prtDs3CurrentOOF The counter associated with the number of OOF seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 1-5000	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.2
prtDs3CurrentLOC The counter associated with the number of LOC seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.3
prtDs3CurrentAIS The counter associated with the number of AIS seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.4
prtDs3CurrentRDI The counter associated with the number of RDI seconds, encountered by a DS3 interface.	SNMPv2-SMIGauge32 Constraints: range: 0-63	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.5
prtDs3CurrentUAS The counter associated with the number of UAS, encountered by a SONET interface.	SNMPv2-SMIGauge32 Constraints: range: 0-7	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.6
prtDs3CurrentBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-128	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.7
prtDs3CurrentFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: range: 0-254	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.8
prtDs3CurrentSLM The counter associated with the number of SLM seconds, encountered by an E3 (only ) interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.9
prtDs3CurrentSES The counter associated with the number of SES encountered by a E3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.10
prtDs3CurrentES The number of Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.11
prtDs3CurrentBitParity Bit Parity Error counter. Relevant to T3 only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.12
prtDs3CurrentPlcpLOF The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configur…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.13
prtDs3CurrentPlcpRAI Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.14
prtDs3CurrentPlcpBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.15
prtDs3CurrentPlcpFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Constraints: range: 1-5000	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.16
prtDs3CurrentBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.17
prtDs3CurrentLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.18
prtDs3CurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: range: 4-4 range: 0-63	.1.3.6.1.4.1.164.3.1.6.3.1.2.1.19

The DS3 Interval table.

prtDs3IntervalEntry row .1.3.6.1.4.1.164.3.1.6.3.1.3.1

An entry in the DS3 Interval table.

Indexes

IF-MIBifIndex prtDs3IntervalNumber

Column	Syntax	OID
prtDs3IntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.1
prtDs3IntervalLOS The counter associated with the number of LOS seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.2
prtDs3IntervalOOF The counter associated with the number of OOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.3
prtDs3IntervalLOC The counter associated with the number of LOC seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.4
prtDs3IntervalAIS The counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 1-4094	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.5
prtDs3IntervalRDI The counter associated with the number of RDI seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-7	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.6
prtDs3IntervalUAS The counter associated with the number of UAS, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 0-16	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.7
prtDs3IntervalBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.8
prtDs3IntervalFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.9
prtDs3IntervalSLM The counter associated with the number of SLM seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.10
prtDs3IntervalSES The counter associated with the number of SES encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.11
prtDs3IntervalES The number of Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Constraints: range: 30-86400	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.12
prtDs3IntervalBitParity Bit Parity Error counter. Relevant to T3 only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.13
prtDs3IntervalPlcpLOF The counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter is relevant for plcpInternal(5) or plcpExternal(6) configur…	SNMPv2-SMIGauge32 Constraints: range: 30-86400	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.14
prtDs3IntervalPlcpRAI Receiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Constraints: range: 10-600	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.15
prtDs3IntervalPlcpBIP The counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.16
prtDs3IntervalPlcpFEBE The counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (external/internal) frame types only.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.17
prtDs3IntervalBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of Fomi-E3/T3.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.18
prtDs3IntervalLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.19
prtDs3IntervalStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.164.3.1.6.3.1.3.1.20

A list of Total entries.

prtDs3TotalEntry row .1.3.6.1.4.1.164.3.1.6.3.1.4.1

An entry of Total table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
prtDs3TotalUAS Number of UASs (Unavailable Seconds) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.4.1.6
prtDs3TotalBPV Number of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.4.1.17
prtDs3TotalLCE Number of LCE (Link Code Errors) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.6.3.1.4.1.18

A list of current statistics entries.  This table
contains additional objects for the current table.

dsx1XCurrentEntry row .1.3.6.1.4.1.164.3.1.6.4.1.2.1

An entry containing additional statistical counters
applicable to a particular current table.

Indexes

DS1-MIBdsx1CurrentIndex WING-MIBwingCfgDhcpSvrName WING-MIBwingCfgDhcpSvrOptionName

Column	Syntax	OID
dsx1CurrentLOS The counter associated with the number of LOS seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.1
dsx1CurrentLOF The counter associated with the number of LOF seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 0-254	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.2
dsx1CurrentLOC Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.3
dsx1CurrentAIS The counter associated with the number of AIS seconds, encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.4
dsx1CurrentRAI Remote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received from the far end (PABX) over FDL when it detects a Loss …	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.5
dsx1CurrentLOMF Loss of Multi-Frame sequence in E1 time slot 16.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.6
dsx1CurrentFEBE Far End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.7
dsx1CurrentStatus The statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy out. 4 - notValid - module is out.	OctetString Constraints: range: 4-4 range: 1-255	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.8
dsx1CurrentBPV The counter associated with the number of BPVs (Bi-Polar Violations) encountered by a DS1 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.9
dsx1CurrentLOCRCMF Loss of CRC4 Multi-Frame sequence in E1. encountered in the current 15 minute interval	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.10
dsx1CurrentLOFC Counts the number of loss of frame events measured. encountered in the current 15 minute interval	PerfHist-TC-MIBPerfCurrentCount Constraints: range: 1-31622399	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.11
dsx1CurrentCRCErrors Counts the number of CRC error events, encountered in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.164.3.1.6.4.1.2.1.12