Standard view Table view

DS1-MIB

        The MIB module to describe DS1, J1, E1, DS2, and
E2 interfaces objects.
        
Copyright (c) The IETF Trust (2007).  This
version of this MIB module is part of RFC 4805;
see the RFC itself for full legal notices.
Source file
DS1-MIB
Last revised
Identity
ds1
Base OID
1.3.6.1.2.1.10.18
Imported Objects
IF-MIB ifIndex InterfaceIndex
PerfHist-TC-MIB PerfCurrentCount PerfIntervalCount PerfTotalCount
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission
SNMPv2-TC DisplayString TimeStamp TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DS1-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DS1-MIB::ds1'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DS1-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DS1-MIB::ds1'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (120)
ds1
.1.3.6.1.2.1.10.18
dsx1FarEndCurrentTable
.1.3.6.1.2.1.10.18.10
dsx1FarEndCurrentEntry
dsx1FarEndCurrentIndex
 .1.3.6.1.2.1.10.18.10.1
dsx1FarEndCurrentIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.10.1.1
dsx1FarEndCurrentPCVs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.10
dsx1FarEndCurrentBESs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.11
dsx1FarEndCurrentDMs deprecated
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.12
dsx1FarEndInvalidIntervals
Integer32
 .1.3.6.1.2.1.10.18.10.1.13
dsx1FarEndTimeElapsed
Integer32
 .1.3.6.1.2.1.10.18.10.1.2
dsx1FarEndValidIntervals
Integer32
 .1.3.6.1.2.1.10.18.10.1.3
dsx1FarEndCurrentESs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.4
dsx1FarEndCurrentSESs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.5
dsx1FarEndCurrentSEFSs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.6
dsx1FarEndCurrentUASs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.7
dsx1FarEndCurrentCSSs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.8
dsx1FarEndCurrentLESs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.10.1.9
dsx1FarEndIntervalTable
.1.3.6.1.2.1.10.18.11
dsx1FarEndIntervalEntry
dsx1FarEndIntervalIndexdsx1FarEndIntervalNumber
 .1.3.6.1.2.1.10.18.11.1
dsx1FarEndIntervalIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.11.1.1
dsx1FarEndIntervalBESs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.10
dsx1FarEndIntervalDMs deprecated
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.11
dsx1FarEndIntervalValidData
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.10.18.11.1.12
dsx1FarEndIntervalNumber
Integer32
 .1.3.6.1.2.1.10.18.11.1.2
dsx1FarEndIntervalESs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.3
dsx1FarEndIntervalSESs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.4
dsx1FarEndIntervalSEFSs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.5
dsx1FarEndIntervalUASs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.6
dsx1FarEndIntervalCSSs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.7
dsx1FarEndIntervalLESs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.8
dsx1FarEndIntervalPCVs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.11.1.9
dsx1FarEndTotalTable
.1.3.6.1.2.1.10.18.12
dsx1FarEndTotalEntry
dsx1FarEndTotalIndex
 .1.3.6.1.2.1.10.18.12.1
dsx1FarEndTotalIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.12.1.1
dsx1FarEndTotalDMs deprecated
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.10
dsx1FarEndTotalESs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.2
dsx1FarEndTotalSESs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.3
dsx1FarEndTotalSEFSs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.4
dsx1FarEndTotalUASs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.5
dsx1FarEndTotalCSSs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.6
dsx1FarEndTotalLESs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.7
dsx1FarEndTotalPCVs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.8
dsx1FarEndTotalBESs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.12.1.9
dsx1FracTable deprecated
.1.3.6.1.2.1.10.18.13
dsx1FracEntry deprecated
dsx1FracIndexdsx1FracNumber
 .1.3.6.1.2.1.10.18.13.1
dsx1FracIndex deprecated
Integer32
 .1.3.6.1.2.1.10.18.13.1.1
dsx1FracNumber deprecated
Integer32
 .1.3.6.1.2.1.10.18.13.1.2
dsx1FracIfIndex deprecated r/w
Integer32
 .1.3.6.1.2.1.10.18.13.1.3
ds1Conformance
.1.3.6.1.2.1.10.18.14
ds1Groups
.1.3.6.1.2.1.10.18.14.1
ds1Compliances
.1.3.6.1.2.1.10.18.14.2
ds1Traps
.1.3.6.1.2.1.10.18.15
dsx1ChanMappingTable
.1.3.6.1.2.1.10.18.16
dsx1ChanMappingEntry
IF-MIBifIndexdsx1Ds1ChannelNumber
 .1.3.6.1.2.1.10.18.16.1
dsx1ChanMappedIfIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.16.1.1
dsx1ConfigTable
.1.3.6.1.2.1.10.18.6
dsx1ConfigEntry
dsx1LineIndex
 .1.3.6.1.2.1.10.18.6.1
dsx1LineIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.6.1.1
dsx1LineStatus
Integer32
 .1.3.6.1.2.1.10.18.6.1.10
dsx1SignalMode r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.11
dsx1TransmitClockSource r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.12
dsx1Fdl r/w
Integer32
 .1.3.6.1.2.1.10.18.6.1.13
dsx1InvalidIntervals
Integer32
 .1.3.6.1.2.1.10.18.6.1.14
dsx1LineLength r/w
metersInteger32
 .1.3.6.1.2.1.10.18.6.1.15
dsx1LineStatusLastChange
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.10.18.6.1.16
dsx1LineStatusChangeTrapEnable r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.17
dsx1LoopbackStatus
Integer32
 .1.3.6.1.2.1.10.18.6.1.18
dsx1Ds1ChannelNumber
Integer32
 .1.3.6.1.2.1.10.18.6.1.19
dsx1IfIndex deprecated
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.6.1.2
dsx1Channelization r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.20
dsx1LineMode r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.21
dsx1LineBuildOut r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.22
dsx1LineImpedance r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.23
dsx1TimeElapsed
Integer32
 .1.3.6.1.2.1.10.18.6.1.3
dsx1ValidIntervals
Integer32
 .1.3.6.1.2.1.10.18.6.1.4
dsx1LineType r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.5
dsx1LineCoding r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.6
dsx1SendCode r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.7
dsx1CircuitIdentifier r/w
OctetString
 .1.3.6.1.2.1.10.18.6.1.8
dsx1LoopbackConfig r/w
Enumeration
 .1.3.6.1.2.1.10.18.6.1.9
dsx1CurrentTable
.1.3.6.1.2.1.10.18.7
dsx1CurrentEntry
dsx1CurrentIndex
 .1.3.6.1.2.1.10.18.7.1
dsx1CurrentIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.7.1.1
dsx1CurrentDMs deprecated
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.10
dsx1CurrentLCVs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.11
dsx1CurrentESs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.2
dsx1CurrentSESs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.3
dsx1CurrentSEFSs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.4
dsx1CurrentUASs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.5
dsx1CurrentCSSs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.6
dsx1CurrentPCVs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.7
dsx1CurrentLESs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.8
dsx1CurrentBESs
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.10.18.7.1.9
dsx1IntervalTable
.1.3.6.1.2.1.10.18.8
dsx1IntervalEntry
dsx1IntervalIndexdsx1IntervalNumber
 .1.3.6.1.2.1.10.18.8.1
dsx1IntervalIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.8.1.1
dsx1IntervalBESs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.10
dsx1IntervalDMs deprecated
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.11
dsx1IntervalLCVs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.12
dsx1IntervalValidData
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.10.18.8.1.13
dsx1IntervalNumber
Integer32
 .1.3.6.1.2.1.10.18.8.1.2
dsx1IntervalESs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.3
dsx1IntervalSESs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.4
dsx1IntervalSEFSs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.5
dsx1IntervalUASs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.6
dsx1IntervalCSSs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.7
dsx1IntervalPCVs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.8
dsx1IntervalLESs
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.10.18.8.1.9
dsx1TotalTable
.1.3.6.1.2.1.10.18.9
dsx1TotalEntry
dsx1TotalIndex
 .1.3.6.1.2.1.10.18.9.1
dsx1TotalIndex
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.10.18.9.1.1
dsx1TotalDMs deprecated
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.10
dsx1TotalLCVs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.11
dsx1TotalESs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.2
dsx1TotalSESs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.3
dsx1TotalSEFSs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.4
dsx1TotalUASs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.5
dsx1TotalCSSs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.6
dsx1TotalPCVs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.7
dsx1TotalLESs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.8
dsx1TotalBESs
PerfHist-TC-MIBPerfTotalCount
 .1.3.6.1.2.1.10.18.9.1.9
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. PerfHist-TC-MIBrfc
  8. DS1-MIBrfcselected
Conformance Groups (13)
ds1NearEndConfigGroup deprecated
dsx1LineIndex dsx1TimeElapsed dsx1ValidIntervals dsx1LineType dsx1LineCoding dsx1SendCode dsx1CircuitIdentifier dsx1LoopbackConfig dsx1LineStatus dsx1SignalMode dsx1TransmitClockSource dsx1Fdl dsx1InvalidIntervals dsx1LineLength dsx1LoopbackStatus dsx1Ds1ChannelNumber dsx1Channelization
A collection of objects providing configuration
information applicable to all DS1 interfaces.
 .1.3.6.1.2.1.10.18.14.1.1
ds1NearEndStatisticsGroup deprecated
dsx1CurrentIndex dsx1CurrentESs dsx1CurrentSESs dsx1CurrentSEFSs dsx1CurrentUASs dsx1CurrentCSSs dsx1CurrentPCVs dsx1CurrentLESs dsx1CurrentBESs dsx1CurrentDMs dsx1CurrentLCVs dsx1IntervalIndex dsx1IntervalNumber dsx1IntervalESs dsx1IntervalSESs dsx1IntervalSEFSs dsx1IntervalUASs dsx1IntervalCSSs dsx1IntervalPCVs dsx1IntervalLESs dsx1IntervalBESs dsx1IntervalDMs dsx1IntervalLCVs dsx1IntervalValidData dsx1TotalIndex dsx1TotalESs dsx1TotalSESs dsx1TotalSEFSs dsx1TotalUASs dsx1TotalCSSs dsx1TotalPCVs dsx1TotalLESs dsx1TotalBESs dsx1TotalDMs dsx1TotalLCVs
A collection of objects providing statistics
information applicable to all DS1 interfaces.
 .1.3.6.1.2.1.10.18.14.1.2
ds1FarEndGroup deprecated
dsx1FarEndCurrentIndex dsx1FarEndTimeElapsed dsx1FarEndValidIntervals dsx1FarEndCurrentESs dsx1FarEndCurrentSESs dsx1FarEndCurrentSEFSs dsx1FarEndCurrentUASs dsx1FarEndCurrentCSSs dsx1FarEndCurrentLESs dsx1FarEndCurrentPCVs dsx1FarEndCurrentBESs dsx1FarEndCurrentDMs dsx1FarEndInvalidIntervals dsx1FarEndIntervalIndex dsx1FarEndIntervalNumber dsx1FarEndIntervalESs dsx1FarEndIntervalSESs dsx1FarEndIntervalSEFSs dsx1FarEndIntervalUASs dsx1FarEndIntervalCSSs dsx1FarEndIntervalLESs dsx1FarEndIntervalPCVs dsx1FarEndIntervalBESs dsx1FarEndIntervalDMs dsx1FarEndIntervalValidData dsx1FarEndTotalIndex dsx1FarEndTotalESs dsx1FarEndTotalSESs dsx1FarEndTotalSEFSs dsx1FarEndTotalUASs dsx1FarEndTotalCSSs dsx1FarEndTotalLESs dsx1FarEndTotalPCVs dsx1FarEndTotalBESs dsx1FarEndTotalDMs
A collection of objects providing remote
configuration and statistics information.
 .1.3.6.1.2.1.10.18.14.1.3
ds1DeprecatedGroup deprecated
dsx1IfIndex dsx1FracIndex dsx1FracNumber dsx1FracIfIndex
A collection of obsolete objects that may be
implemented for backwards compatibility.
 .1.3.6.1.2.1.10.18.14.1.4
ds1NearEndOptionalConfigGroup
dsx1LineStatusLastChange dsx1LineStatusChangeTrapEnable
A collection of objects that may be implemented
on DS1 and DS2 interfaces.
 .1.3.6.1.2.1.10.18.14.1.5
ds1DS2Group
dsx1LineIndex dsx1LineType dsx1LineCoding dsx1SendCode dsx1LineStatus dsx1SignalMode dsx1TransmitClockSource dsx1Channelization
A collection of objects providing information
about DS2 (6,312 kbps) and E2 (8,448 kbps)
systems.
 .1.3.6.1.2.1.10.18.14.1.6
ds1TransStatsGroup
dsx1CurrentESs dsx1CurrentSESs dsx1CurrentUASs dsx1IntervalESs dsx1IntervalSESs dsx1IntervalUASs dsx1TotalESs dsx1TotalSESs dsx1TotalUASs
A collection of objects that are the
statistics that can be collected from a DS1
interface that is running transparent or unframed
lineType. Statistics not in this list should
return noSuchInstance.
 .1.3.6.1.2.1.10.18.14.1.7
ds1NearEndOptionalTrapGroup
dsx1LineStatusChange
A collection of notifications that may be
implemented on DS1 and DS2 interfaces.
 .1.3.6.1.2.1.10.18.14.1.8
ds1ChanMappingGroup
dsx1ChanMappedIfIndex
A collection of objects that give a mapping of
DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex.
 .1.3.6.1.2.1.10.18.14.1.9
ds1NearEndConfigurationGroup deprecated
dsx1LineIndex dsx1TimeElapsed dsx1ValidIntervals dsx1LineType dsx1LineCoding dsx1SendCode dsx1CircuitIdentifier dsx1LoopbackConfig dsx1LineStatus dsx1SignalMode dsx1TransmitClockSource dsx1Fdl dsx1InvalidIntervals dsx1LineLength dsx1LoopbackStatus dsx1Ds1ChannelNumber dsx1Channelization dsx1LineMode dsx1LineBuildOut
A collection of objects providing configuration
information applicable to all DS1 interfaces.
 .1.3.6.1.2.1.10.18.14.1.10
ds1NearEndCfgGroup
dsx1LineIndex dsx1TimeElapsed dsx1ValidIntervals dsx1LineType dsx1LineCoding dsx1SendCode dsx1CircuitIdentifier dsx1LoopbackConfig dsx1LineStatus dsx1SignalMode dsx1TransmitClockSource dsx1Fdl dsx1InvalidIntervals dsx1LineLength dsx1LoopbackStatus dsx1Ds1ChannelNumber dsx1Channelization dsx1LineMode dsx1LineBuildOut dsx1LineImpedance
A collection of objects providing configuration
information applicable to all DS1 interfaces.
 .1.3.6.1.2.1.10.18.14.1.11
ds1NearEndStatGroup
dsx1CurrentIndex dsx1CurrentESs dsx1CurrentSESs dsx1CurrentSEFSs dsx1CurrentUASs dsx1CurrentCSSs dsx1CurrentPCVs dsx1CurrentLESs dsx1CurrentBESs dsx1CurrentLCVs dsx1IntervalIndex dsx1IntervalNumber dsx1IntervalESs dsx1IntervalSESs dsx1IntervalSEFSs dsx1IntervalUASs dsx1IntervalCSSs dsx1IntervalPCVs dsx1IntervalLESs dsx1IntervalBESs dsx1IntervalLCVs dsx1IntervalValidData dsx1TotalIndex dsx1TotalESs dsx1TotalSESs dsx1TotalSEFSs dsx1TotalUASs dsx1TotalCSSs dsx1TotalPCVs dsx1TotalLESs dsx1TotalBESs dsx1TotalLCVs
A collection of objects providing statistics
information applicable to all DS1 interfaces.
 .1.3.6.1.2.1.10.18.14.1.12
ds1FarEndNGroup
dsx1FarEndCurrentIndex dsx1FarEndTimeElapsed dsx1FarEndValidIntervals dsx1FarEndCurrentESs dsx1FarEndCurrentSESs dsx1FarEndCurrentSEFSs dsx1FarEndCurrentUASs dsx1FarEndCurrentCSSs dsx1FarEndCurrentLESs dsx1FarEndCurrentPCVs dsx1FarEndCurrentBESs dsx1FarEndInvalidIntervals dsx1FarEndIntervalIndex dsx1FarEndIntervalNumber dsx1FarEndIntervalESs dsx1FarEndIntervalSESs dsx1FarEndIntervalSEFSs dsx1FarEndIntervalUASs dsx1FarEndIntervalCSSs dsx1FarEndIntervalLESs dsx1FarEndIntervalPCVs dsx1FarEndIntervalBESs dsx1FarEndIntervalValidData dsx1FarEndTotalIndex dsx1FarEndTotalESs dsx1FarEndTotalSESs dsx1FarEndTotalSEFSs dsx1FarEndTotalUASs dsx1FarEndTotalCSSs dsx1FarEndTotalLESs dsx1FarEndTotalPCVs dsx1FarEndTotalBESs
A collection of objects providing remote
configuration and statistics information.
 .1.3.6.1.2.1.10.18.14.1.13
Compliance Statements (10)

OID .1.3.6.1.2.1.10.18.14.2.1
The compliance statement for T1 and E1
interfaces.
Required groups
mandatory ds1NearEndConfigGroup
mandatory ds1NearEndStatisticsGroup
optional ds1FarEndGroup Implementation of this group is optional for all
systems that attach to a DS1 interface.
optional ds1NearEndOptionalConfigGroup Implementation of this group is optional for all
systems that attach to a DS1 interface.
optional ds1DS2Group Implementation of this group is mandatory for all
systems that attach to a DS2 interface.
optional ds1TransStatsGroup This group is the set of statistics appropriate
for all systems that attach to a DS1 interface
running transparent or unFramed lineType.
optional ds1ChanMappingGroup This group is the set of objects for mapping a
DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex.
Implementation of this group is mandatory for
systems that support the channelization of DS3s
into DS1s.
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
Enumeration
other(1), dsx1ESF(2), dsx1D4(3), dsx1E1(4), dsx1E1CRC(5), dsx1E1MF(6), dsx1E1CRCMF(7), dsx1Unframed(8), dsx1E1Unframed(9), dsx1DS2M12(10), dsx1E2(11)
The ability to set the line type is not
required.
dsx1LineCoding readonly
The ability to set the line coding is not
required.
dsx1SendCode readonly
The ability to set the send code is not
required.
dsx1LoopbackConfig readonly
The ability to set loopbacks is not required.
dsx1SignalMode readonly
The ability to set the signal mode is not
required.
dsx1TransmitClockSource readonly
Enumeration
loopTiming(1), localTiming(2), throughTiming(3)
The ability to set the transmit clock source is
not required.
dsx1Fdl readonly
The ability to set the FDL is not required.
dsx1LineLength readonly
The ability to set the line length is not
required.
dsx1Channelization readonly
The ability to set the channelization is not
required.

OID .1.3.6.1.2.1.10.18.14.2.2
Compliance statement for using this MIB for ISDN
Primary Rate interfaces on T1 lines.
Required groups
mandatory ds1NearEndConfigGroup
mandatory ds1NearEndStatisticsGroup
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
Enumeration
dsx1ESF(2)
Line type for T1 ISDN Primary Rate
interfaces.
dsx1LineCoding readonly
Enumeration
dsx1B8ZS(2)
Type of Zero Code Suppression for
T1 ISDN Primary Rate interfaces.
dsx1SignalMode readonly
Enumeration
none(1), messageOriented(4)
Possible signaling modes for
T1 ISDN Primary Rate interfaces.
dsx1TransmitClockSource readonly
Enumeration
loopTiming(1)
The transmit clock is derived from
received clock on ISDN Primary Rate
interfaces.
dsx1Fdl readonly
Facilities Data Link usage on T1 ISDN
Primary Rate interfaces.
Note: Eventually, dsx1Att-54016(4) is to be
used here since the line type is ESF.
dsx1Channelization readonly
The ability to set the channelization

is not required.

OID .1.3.6.1.2.1.10.18.14.2.3
Compliance statement for using this MIB for ISDN
Primary Rate interfaces on E1 lines.
Required groups
mandatory ds1NearEndConfigGroup
mandatory ds1NearEndStatisticsGroup
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
Enumeration
dsx1E1CRC(5)
Line type for E1 ISDN Primary Rate
interfaces.
dsx1LineCoding readonly
Enumeration
dsx1HDB3(3)
Type of Zero Code Suppression for
E1 ISDN Primary Rate interfaces.
dsx1SignalMode readonly
Enumeration
messageOriented(4)
Signaling on E1 ISDN Primary Rate interfaces
is always message oriented.
dsx1TransmitClockSource readonly
Enumeration
loopTiming(1)
The transmit clock is derived from received
clock on ISDN Primary Rate interfaces.
dsx1Fdl readonly
Facilities Data Link usage on E1 ISDN
Primary Rate interfaces.
Note: There is an 'M-Channel' in E1,
using National Bit Sa4 (G.704,
Table 5A). It is used to implement
management features between ET
and NT. This is different from
FDL in T1, which is used to carry
control signals and performance
data. In E1, control and status
signals are carried using National
Bits Sa5, Sa6, and A (RAI Ind.).
This indicates that only the other(1) or
eventually the dsx1Fdl-none(8) bits should
be set in this object for E1 PRI.
dsx1Channelization readonly
The ability to set the channelization is not
required.

OID .1.3.6.1.2.1.10.18.14.2.4
Compliance statement for using this MIB for DS2
interfaces.
Required groups
mandatory ds1DS2Group
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
Enumeration
dsx1DS2M12(10), dsx1E2(11)
Line type for DS2, E2
interfaces.
dsx1Channelization readonly
The ability to set the channelization is not
required.

OID .1.3.6.1.2.1.10.18.14.2.5
The compliance statement for T1 and E1
interfaces.
Required groups
mandatory ds1NearEndConfigurationGroup
mandatory ds1NearEndStatisticsGroup
optional ds1FarEndGroup Implementation of this group is optional for all
systems that attach to a DS1 interface.
optional ds1NearEndOptionalTrapGroup Implementation of this group is optional for all
systems that attach to a DS1 interface. If it is
implemented, then ds1NearEndOptionalConfigGroup
should also be implemented.
optional ds1NearEndOptionalConfigGroup Implementation of this group is recommended for
all systems that attach to a DS1 interface and
implement ds1NearEndOptionalTrapGroup.
optional ds1DS2Group Implementation of this group is mandatory for all
systems that attach to a DS2 interface.
optional ds1TransStatsGroup This group is the set of statistics appropriate
for all systems that attach to a DS1 interface
running transparent or unFramed lineType.
optional ds1ChanMappingGroup This group is the set of objects for mapping a
DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex.
Implementation of this group is mandatory for
systems that support the channelization of DS3s
into DS1s.
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
The ability to set the line type is not
required.
dsx1LineCoding readonly
The ability to set the line coding is not
required.
dsx1SendCode readonly
The ability to set the send code is not
required.
dsx1LoopbackConfig readonly
The ability to set loopbacks is not required.
dsx1SignalMode readonly
The ability to set the signal mode is not
required.
dsx1TransmitClockSource readonly
The ability to set the transmit clock source is
not required.
dsx1Fdl readonly
The ability to set the FDL is not required.
dsx1LineLength readonly
The ability to set the line length is not
required.
dsx1Channelization readonly
The ability to set the channelization is not
required.
dsx1LineMode readonly
The ability to set the line mode is not
required.
dsx1LineBuildOut readonly
The ability to set the line build-out is not
required.

OID .1.3.6.1.2.1.10.18.14.2.6
Compliance statement for using this MIB for ISDN
Primary Rate interfaces on T1 lines.
Required groups
mandatory ds1NearEndConfigurationGroup
mandatory ds1NearEndStatisticsGroup
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
Enumeration
dsx1ESF(2)
Line type for T1 ISDN Primary Rate
interfaces.
dsx1LineCoding readonly
Enumeration
dsx1B8ZS(2)
Type of Zero Code Suppression for
T1 ISDN Primary Rate interfaces.
dsx1SignalMode readonly
Enumeration
none(1), messageOriented(4)
Possible signaling modes for
T1 ISDN Primary Rate interfaces.
dsx1TransmitClockSource readonly
Enumeration
loopTiming(1)
The transmit clock is derived from
received clock on ISDN Primary Rate
interfaces.
dsx1Fdl readonly
Facilities Data Link usage on T1 ISDN
Primary Rate interfaces.
Note: Eventually, dsx1Att-54016(4) is to be
used here since the line type is ESF.
dsx1Channelization readonly
The ability to set the channelization
is not required.
dsx1LineMode readonly
The ability to set the line mode is not
required.
dsx1LineBuildOut readonly
The ability to set the line build-out
is not required.

OID .1.3.6.1.2.1.10.18.14.2.7
Compliance statement for using this MIB for ISDN
Primary Rate interfaces on E1 lines.
Required groups
mandatory ds1NearEndConfigurationGroup
mandatory ds1NearEndStatisticsGroup
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
Enumeration
dsx1E1CRC(5)
Line type for E1 ISDN Primary Rate
interfaces.
dsx1LineCoding readonly
Enumeration
dsx1HDB3(3)
Type of Zero Code Suppression for
E1 ISDN Primary Rate interfaces.
dsx1SignalMode readonly
Enumeration
messageOriented(4)
Signaling on E1 ISDN Primary Rate interfaces
is always message oriented.
dsx1TransmitClockSource readonly
Enumeration
loopTiming(1)
The transmit clock is derived from received
clock on ISDN Primary Rate interfaces.
dsx1Fdl readonly
Facilities Data Link usage on E1 ISDN
Primary Rate interfaces.
Note: There is an 'M-Channel' in E1,
using National Bit Sa4 (G704,
Table 5A). It is used to implement

management features between ET
and NT. This is different from
FDL in T1, which is used to carry
control signals and performance
data. In E1, control and status
signals are carried using National
Bits Sa5, Sa6, and A (RAI Ind.).
This indicates that only the other(1) or
eventually the dsx1Fdl-none(8) bits should
be set in this object for E1 PRI.
dsx1Channelization readonly
The ability to set the channelization is not
required.
dsx1LineMode readonly
The ability to set the line mode is not
required.
dsx1LineBuildOut readonly
The ability to set the line build-out
is not required.

OID .1.3.6.1.2.1.10.18.14.2.8
The compliance statement for T1, J1, and E1
interfaces.
Required groups
mandatory ds1NearEndCfgGroup
mandatory ds1NearEndStatGroup
optional ds1FarEndNGroup Implementation of this group is optional for all
systems that attach to a DS1 interface.
optional ds1NearEndOptionalTrapGroup Implementation of this group is optional for all
systems that attach to a DS1 interface. If it is

implemented, then ds1NearEndOptionalConfigGroup
should also be implemented.
optional ds1NearEndOptionalConfigGroup Implementation of this group is recommended for
all systems that attach to a DS1 interface and
implement ds1NearEndOptionalTrapGroup.
optional ds1DS2Group Implementation of this group is mandatory for all
systems that attach to a DS2 interface.
optional ds1TransStatsGroup This group is the set of statistics appropriate
for all systems that attach to a DS1 interface
running transparent or unFramed lineType.
optional ds1ChanMappingGroup This group is the set of objects for mapping a
DS3 Channel (dsx1Ds1ChannelNumber) to ifIndex.
Implementation of this group is mandatory for
systems that support the channelization of DS3s
into DS1s.
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
The ability to set the line type is not
required.
dsx1LineCoding readonly
The ability to set the line coding is not
required.
dsx1SendCode readonly
The ability to set the send code is not
required.
dsx1LoopbackConfig readonly
The ability to set loopbacks is not required.
dsx1SignalMode readonly
The ability to set the signal mode is not
required.
dsx1TransmitClockSource readonly
The ability to set the transmit clock source is
not required.
dsx1Fdl readonly
The ability to set the FDL is not required.
dsx1LineLength readonly
The ability to set the line length is not
required.
dsx1Channelization readonly
The ability to set the channelization is not
required.
dsx1LineMode readonly
The ability to set the line mode is not
required.
dsx1LineBuildOut readonly
The ability to set the line build-out is not
required.
dsx1LineImpedance readonly
The ability to set line impedance is not

required.

OID .1.3.6.1.2.1.10.18.14.2.9
Compliance statement for using this MIB for ISDN
Primary Rate interfaces on T1 lines.
Required groups
mandatory ds1NearEndCfgGroup
mandatory ds1NearEndStatGroup
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
Enumeration
dsx1ESF(2)
Line type for T1 ISDN Primary Rate
interfaces.
dsx1LineCoding readonly
Enumeration
dsx1B8ZS(2)
Type of Zero Code Suppression for
T1 ISDN Primary Rate interfaces.
dsx1SignalMode readonly
Enumeration
none(1), messageOriented(4)
Possible signaling modes for
T1 ISDN Primary Rate interfaces.
dsx1TransmitClockSource readonly
Enumeration
loopTiming(1)
The transmit clock is derived from
received clock on ISDN Primary Rate

interfaces.
dsx1Fdl readonly
Facilities Data Link usage on T1 ISDN
Primary Rate interfaces.
Note: Eventually, dsx1Att-54016(4) is to be
used here since the line type is ESF.
dsx1Channelization readonly
The ability to set the channelization
is not required.
dsx1LineMode readonly
The ability to set the line mode is not
required.
dsx1LineBuildOut readonly
The ability to set the line build-out
is not required.

OID .1.3.6.1.2.1.10.18.14.2.10
Compliance statement for using this MIB for ISDN
Primary Rate interfaces on E1 lines.
Required groups
mandatory ds1NearEndCfgGroup
mandatory ds1NearEndStatGroup
Object refinements
ObjectAccessSyntaxDescription
dsx1LineType readonly
Enumeration
dsx1E1CRC(5)
Line type for E1 ISDN Primary Rate
interfaces.
dsx1LineCoding readonly
Enumeration
dsx1HDB3(3)
Type of Zero Code Suppression for
E1 ISDN Primary Rate interfaces.
dsx1SignalMode readonly
Enumeration
messageOriented(4)
Signaling on E1 ISDN Primary Rate interfaces
is always message oriented.
dsx1TransmitClockSource readonly
Enumeration
loopTiming(1)
The transmit clock is derived from received
clock on ISDN Primary Rate interfaces.
dsx1Fdl readonly
Facilities Data Link usage on E1 ISDN
Primary Rate interfaces.
Note: There is an 'M-Channel' in E1,
using National Bit Sa4 (G704,
Table 5A). It is used to implement
management features between ET
and NT. This is different from
FDL in T1, which is used to carry
control signals and performance
data. In E1, control and status
signals are carried using National
Bits Sa5, Sa6, and A (RAI Ind.).
This indicates that only the other(1) or
eventually the dsx1Fdl-none(8) bits should
be set in this object for E1 PRI.
dsx1Channelization readonly
The ability to set the channelization is not
required.
dsx1LineMode readonly
The ability to set the line mode is not
required.
dsx1LineBuildOut readonly
The ability to set the line build-out
is not required.
dsx1LineImpedance readonly
The ability to set line impedance is not
required.
Notifications / Traps (1)
NameOIDDescription
dsx1LineStatusChange
dsx1LineStatus dsx1LineStatusLastChange
.1.3.6.1.2.1.10.18.15.0.1
A dsx1LineStatusChange trap is sent when the
value of an instance dsx1LineStatus changes. It
can be utilized by an Network Management Station
(NMS) to trigger polls. When the line status
change results from a higher-level line status
change (i.e., DS3), then no traps for the DS1
are sent.