ATM-MIB
This is the MIB Module for ATM and AAL5-related
objects for managing ATM interfaces, ATM virtual
links, ATM cross-connects, AAL5 entities, and
and AAL5 connections.
- Source file
ATM-MIB- Last revised
- Identity
atmMIB- Base OID
1.3.6.1.2.1.37
Imported Objects
| ATM-TC-MIB | AtmAddr AtmConnCastType AtmConnKind atmNoClpNoScr AtmServiceCategory AtmTrafficDescrParamIndex AtmVcIdentifier AtmVorXAdminStatus AtmVorXLastChange AtmVorXOperStatus AtmVpIdentifier |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ATM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ATM-MIB::atmMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-MIB::atmMIB'
Objects (111)
Showing 111 of 111 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.37 |
||
.1.3.6.1.2.1.37.1 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.10 |
|
.1.3.6.1.2.1.37.1.11 |
||
.1.3.6.1.2.1.37.1.11.1 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.11.1.1 |
|
.1.3.6.1.2.1.37.1.11.1.10 |
||
.1.3.6.1.2.1.37.1.11.1.11 |
||
.1.3.6.1.2.1.37.1.11.1.12 |
||
.1.3.6.1.2.1.37.1.11.1.13 |
||
.1.3.6.1.2.1.37.1.11.1.2 |
||
.1.3.6.1.2.1.37.1.11.1.3 |
||
.1.3.6.1.2.1.37.1.11.1.4 |
||
.1.3.6.1.2.1.37.1.11.1.5 |
||
.1.3.6.1.2.1.37.1.11.1.6 |
||
.1.3.6.1.2.1.37.1.11.1.7 |
||
.1.3.6.1.2.1.37.1.11.1.8 |
||
.1.3.6.1.2.1.37.1.11.1.9 |
||
.1.3.6.1.2.1.37.1.12 |
||
.1.3.6.1.2.1.37.1.12.1 |
||
.1.3.6.1.2.1.37.1.12.1.1 |
||
.1.3.6.1.2.1.37.1.12.1.2 |
||
.1.3.6.1.2.1.37.1.12.1.3 |
||
.1.3.6.1.2.1.37.1.12.1.4 |
||
.1.3.6.1.2.1.37.1.12.1.5 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.13 |
|
.1.3.6.1.2.1.37.1.2 |
||
.1.3.6.1.2.1.37.1.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.2.1.1 |
|
|
|
.1.3.6.1.2.1.37.1.2.1.10 |
|
.1.3.6.1.2.1.37.1.2.1.11 |
||
.1.3.6.1.2.1.37.1.2.1.12 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.2.1.13 |
|
|
Integer32
|
.1.3.6.1.2.1.37.1.2.1.14 |
|
.1.3.6.1.2.1.37.1.2.1.15 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.2.1.2 |
|
|
Integer32
|
.1.3.6.1.2.1.37.1.2.1.3 |
|
|
Integer32
|
.1.3.6.1.2.1.37.1.2.1.4 |
|
|
Integer32
|
.1.3.6.1.2.1.37.1.2.1.5 |
|
|
Integer32
|
.1.3.6.1.2.1.37.1.2.1.6 |
|
.1.3.6.1.2.1.37.1.2.1.7 |
||
.1.3.6.1.2.1.37.1.2.1.8 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.37.1.2.1.9 |
.1.3.6.1.2.1.37.1.3 |
||
.1.3.6.1.2.1.37.1.3.1 |
||
.1.3.6.1.2.1.37.1.3.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.37.1.3.1.2 |
|
.1.3.6.1.2.1.37.1.3.1.3 |
||
.1.3.6.1.2.1.37.1.4 |
||
.1.3.6.1.2.1.37.1.4.1 |
||
.1.3.6.1.2.1.37.1.4.1.1 |
||
|
Enumeration
|
.1.3.6.1.2.1.37.1.4.1.2 |
|
.1.3.6.1.2.1.37.1.5 |
||
.1.3.6.1.2.1.37.1.5.1 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.5.1.1 |
|
.1.3.6.1.2.1.37.1.5.1.10 |
||
.1.3.6.1.2.1.37.1.5.1.11 |
||
|
ObjectIdentifier
|
.1.3.6.1.2.1.37.1.5.1.2 |
|
.1.3.6.1.2.1.37.1.5.1.3 |
||
.1.3.6.1.2.1.37.1.5.1.4 |
||
.1.3.6.1.2.1.37.1.5.1.5 |
||
.1.3.6.1.2.1.37.1.5.1.6 |
||
.1.3.6.1.2.1.37.1.5.1.7 |
||
|
|
Integer32
|
.1.3.6.1.2.1.37.1.5.1.8 |
.1.3.6.1.2.1.37.1.5.1.9 |
||
.1.3.6.1.2.1.37.1.6 |
||
.1.3.6.1.2.1.37.1.6.1 |
||
.1.3.6.1.2.1.37.1.6.1.1 |
||
|
|
.1.3.6.1.2.1.37.1.6.1.10 |
|
.1.3.6.1.2.1.37.1.6.1.2 |
||
.1.3.6.1.2.1.37.1.6.1.3 |
||
.1.3.6.1.2.1.37.1.6.1.4 |
||
.1.3.6.1.2.1.37.1.6.1.5 |
||
.1.3.6.1.2.1.37.1.6.1.6 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.6.1.7 |
|
|
|
.1.3.6.1.2.1.37.1.6.1.8 |
|
|
|
.1.3.6.1.2.1.37.1.6.1.9 |
|
.1.3.6.1.2.1.37.1.7 |
||
.1.3.6.1.2.1.37.1.7.1 |
||
.1.3.6.1.2.1.37.1.7.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.7.1.10 |
|
|
Enumeration
|
.1.3.6.1.2.1.37.1.7.1.11 |
|
|
Integer32
|
.1.3.6.1.2.1.37.1.7.1.12 |
|
|
|
.1.3.6.1.2.1.37.1.7.1.13 |
|
|
|
.1.3.6.1.2.1.37.1.7.1.14 |
|
|
|
.1.3.6.1.2.1.37.1.7.1.15 |
|
.1.3.6.1.2.1.37.1.7.1.2 |
||
.1.3.6.1.2.1.37.1.7.1.3 |
||
.1.3.6.1.2.1.37.1.7.1.4 |
||
.1.3.6.1.2.1.37.1.7.1.5 |
||
.1.3.6.1.2.1.37.1.7.1.6 |
||
.1.3.6.1.2.1.37.1.7.1.7 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.37.1.7.1.8 |
|
Integer32
|
.1.3.6.1.2.1.37.1.7.1.9 |
|
|
Integer32
|
.1.3.6.1.2.1.37.1.8 |
|
.1.3.6.1.2.1.37.1.9 |
||
.1.3.6.1.2.1.37.1.9.1 |
||
|
Integer32
|
.1.3.6.1.2.1.37.1.9.1.1 |
|
.1.3.6.1.2.1.37.1.9.1.10 |
||
.1.3.6.1.2.1.37.1.9.1.11 |
||
.1.3.6.1.2.1.37.1.9.1.2 |
||
.1.3.6.1.2.1.37.1.9.1.3 |
||
.1.3.6.1.2.1.37.1.9.1.4 |
||
.1.3.6.1.2.1.37.1.9.1.5 |
||
.1.3.6.1.2.1.37.1.9.1.6 |
||
.1.3.6.1.2.1.37.1.9.1.7 |
||
.1.3.6.1.2.1.37.1.9.1.8 |
||
.1.3.6.1.2.1.37.1.9.1.9 |
||
.1.3.6.1.2.1.37.2 |
||
.1.3.6.1.2.1.37.2.1 |
||
.1.3.6.1.2.1.37.2.2 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- ATM-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- ATM-MIBrfcselected
Conformance Groups (17)
Compliance Statements (2)
OID
.1.3.6.1.2.1.37.2.2.1The compliance statement for SNMP entities
including networks which have ATM and
AAL5 interfaces.
including networks which have ATM and
AAL5 interfaces.
Required groups
| mandatory | atmInterfaceConfGroup | |
| mandatory | atmTrafficDescrGroup | |
| optional | atmInterfaceDs3PlcpGroup |
This group is mandatory only for those ATM interfaces which implement the DS3 PLCP layer. |
| optional | atmInterfaceTCGroup |
This group is mandatory only for those ATM interfaces which implement the TC Sublayer. |
| optional | atmVpcTerminationGroup |
This group is mandatory only for those ATM interfaces which implement ATM VPLs that terminate VPCs (i.e., ones which are NOT cross-connected to other VPLs). |
| optional | atmVpCrossConnectGroup |
This group is mandatory only for those ATM interfaces which implement ATM VPLs that are not associated with VCLs and are cross-connected to other VPLs. |
| optional | atmVccTerminationGroup |
This group is mandatory only for those ATM interfaces which implement ATM VCLs that terminate VCCs (i.e., ones which are NOT cross-connected to other VCLs). |
| optional | atmVcCrossConnectGroup |
This group is mandatory only for those ATM interfaces which implement ATM VCLs that are cross-connected to other VCLs. |
| optional | aal5VccGroup |
This group is mandatory for the AAL5 virtual connections only. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| atmInterfaceMaxVpcs | readonly | Write access is not required. | |
| atmInterfaceMaxVccs | readonly | Write access is not required. | |
| atmInterfaceMaxActiveVpiBits | readonly | Write access is not required. | |
| atmInterfaceMaxActiveVciBits | readonly | Write access is not required. | |
| atmInterfaceIlmiVpi | readonly | Write access is not required. | |
| atmInterfaceIlmiVci | readonly | Write access is not required. | |
| atmInterfaceMyNeighborIpAddress | readonly | Write access is not required. | |
| atmInterfaceMyNeighborIfName | readonly | Write access is not required. | |
| atmTrafficDescrType | readonly | Write access is not required. | |
| atmTrafficDescrParam1 | readonly | Write access is not required. | |
| atmTrafficDescrParam2 | readonly | Write access is not required. | |
| atmTrafficDescrParam3 | readonly | Write access is not required. | |
| atmTrafficDescrParam4 | readonly | Write access is not required. | |
| atmTrafficDescrParam5 | readonly | Write access is not required. | |
| atmTrafficQoSClass | readonly | Write access is not required. | |
| atmTrafficDescrRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVplAdminStatus | readonly | Write access is not required. | |
| atmVplReceiveTrafficDescrIndex | readonly | Write access is not required. | |
| atmVplTransmitTrafficDescrIndex | readonly | Write access is not required. | |
| atmVplRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVpCrossConnectAdminStatus | readonly | Write access is not required. | |
| atmVpCrossConnectRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVclAdminStatus | readonly | Write access is not required. | |
| atmVclReceiveTrafficDescrIndex | readonly | Write access is not required. | |
| atmVclTransmitTrafficDescrIndex | readonly | Write access is not required. | |
| atmVccAalType | readonly | Write access is not required. | |
| atmVclRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVcCrossConnectAdminStatus | readonly | Write access is not required. | |
| atmVcCrossConnectRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVccAal5CpcsTransmitSduSize | readonly | Write access is not required. | |
| atmVccAal5CpcsReceiveSduSize | readonly | Write access is not required. | |
| atmVccAal5EncapsType | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.37.2.2.2The compliance statement for SNMP entities
including networks which have ATM and
AAL5 interfaces.
including networks which have ATM and
AAL5 interfaces.
Required groups
| mandatory | atmInterfaceConfGroup2 | |
| mandatory | atmTrafficDescrGroup2 | |
| optional | atmInterfaceDs3PlcpGroup |
This group is mandatory only for those ATM interfaces which implement the DS3 PLCP layer. |
| optional | atmInterfaceTCGroup |
This group is mandatory only for those ATM interfaces which implement the TC Sublayer. |
| optional | atmVpcTerminationGroup2 |
This group is mandatory only for those ATM interfaces which implement ATM VPLs that terminate VPCs (i.e., ones which are NOT cross-connected to other VPLs). |
| optional | atmVplCrossConnectGroup |
This group is mandatory only for those ATM interfaces which implement ATM VPLs that are not associated with VCLs and are cross-connected to other VPLs for VPCs. |
| optional | atmVpPvcCrossConnectGroup |
This group is mandatory only for those ATM interfaces which implement ATM VPLs that are not associated with VCLs and are cross-connected to other VPLs for permanent VPCs (i.e., PVCs). This group is not used to crossconnect a PVC with an SVC to form a Soft PVC. |
| optional | atmVccTerminationGroup2 |
This group is mandatory only for those ATM interfaces which implement ATM VCLs that terminate VCCs (i.e., ones which are NOT cross-connected to other VCLs). |
| optional | atmVclCrossConnectGroup |
This group is mandatory only for those ATM interfaces which implement ATM VCLs that are cross-connected to other VCLs for VCCs. |
| optional | atmVcPvcCrossConnectGroup |
This group is mandatory only for those ATM interfaces which implement ATM VCLs that are cross-connected to other VCLs for permanent VCCs (i.e., PVCs). This group is not used to crossconnect a PVC with an SVC to form a Soft PVC. |
| optional | aal5VccGroup |
This group is mandatory for the AAL5 virtual connections only. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| atmInterfaceMaxVpcs | readonly | Write access is not required. | |
| atmInterfaceMaxVccs | readonly | Write access is not required. | |
| atmInterfaceMaxActiveVpiBits | readonly | Write access is not required. At the ATM UNI the maximum number of active VPI bits configured for use ranges from 0 to 8 only. Implementations may support smaller ranges. |
|
| atmInterfaceMaxActiveVciBits | readonly | Write access is not required. Implementations may support smaller ranges. |
|
| atmInterfaceIlmiVpi | readonly | Write access is not required. | |
| atmInterfaceIlmiVci | readonly | Write access is not required. | |
| atmInterfaceMyNeighborIpAddress | readonly | Write access is not required. | |
| atmInterfaceMyNeighborIfName | readonly | Write access is not required. | |
| atmInterfaceSubscrAddress | readonly | Write access is not required. | |
| atmTrafficDescrParamIndexNext | This object is only required for systems that support the creation of entries in the atmTrafficDescrParamTable. |
||
| atmTrafficDescrType | readonly | Write access is not required. | |
| atmTrafficDescrParam1 | readonly | Write access is not required. | |
| atmTrafficDescrParam2 | readonly | Write access is not required. | |
| atmTrafficDescrParam3 | readonly | Write access is not required. | |
| atmTrafficDescrParam4 | readonly | Write access is not required. | |
| atmTrafficDescrParam5 | readonly | Write access is not required. | |
| atmServiceCategory | readonly | Write access is not required. | |
| atmTrafficDescrRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmTrafficFrameDiscard | readonly | Write access is not required. | |
| atmVplAdminStatus | readonly | Write access is not required. | |
| atmVplReceiveTrafficDescrIndex | readonly | Write access is not required. | |
| atmVplTransmitTrafficDescrIndex | readonly | Write access is not required. | |
| atmVplRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVplCastType | readonly | Write access is not required. | |
| atmVplConnKind | readonly | Write access is not required. | |
| atmVpCrossConnectAdminStatus | readonly | Write access is not required. | |
| atmVpCrossConnectRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVclAdminStatus | readonly | Write access is not required. | |
| atmVclReceiveTrafficDescrIndex | readonly | Write access is not required. | |
| atmVclTransmitTrafficDescrIndex | readonly | Write access is not required. | |
| atmVccAalType | readonly | Write access is not required. | |
| atmVclRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVclCastType | readonly | Write access is not required. | |
| atmVclConnKind | readonly | Write access is not required. | |
| atmVcCrossConnectAdminStatus | readonly | Write access is not required. | |
| atmVcCrossConnectRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| atmVccAal5CpcsTransmitSduSize | readonly | Write access is not required. | |
| atmVccAal5CpcsReceiveSduSize | readonly | Write access is not required. | |
| atmVccAal5EncapsType | readonly | Write access is not required. |