RAISECOM-OSPFV2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
24
Rows
24
Columns
199

raisecomOspfTrapControlTable

table
.1.3.6.1.4.1.8886.1.47.1.1 · 1 row entry · 4 columns
Open in standard view 
The table enable or disable ospf traps
raisecomOspfTrapControlEntry entry .1.3.6.1.4.1.8886.1.47.1.1.1
Define an entry in the raisecomOspfTrapControl.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.
Indexes
raisecomOspfProcessId
Column Syntax OID
raisecomOspfSetTrap
Whether the Device shoule send traps.
SWITCH-TCEnableVarr/w
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.47.1.1.1.1
raisecomOspfConfigErrorType
Potential types of configuration conflicts.
Used by the ospfConfigError and ospfConfigVir-
tError traps.
Enumeration
Enumerated Values:
1badVersion
2areaMismatch
3unknownNbmaNbr
4unknownVirtualNbr
5authTypeMismatch
6authFailure
7netMaskMismatch
8helloIntervalMismatch
9deadIntervalMismatch
10optionMismatch
 .1.3.6.1.4.1.8886.1.47.1.1.1.2
raisecomOspfPacketType
OSPF packet types.
Enumeration
Enumerated Values:
1hello
2dbDescript
3lsReq
4lsUpdate
5lsAck
 .1.3.6.1.4.1.8886.1.47.1.1.1.3
raisecomOspfPacketSrc
The IP address of an inbound packet that can-
not be identified by a neighbor instance.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.1.1.1.4

raisecomOspfGlobalTable

table
.1.3.6.1.4.1.8886.1.47.2.1 · 1 row entry · 29 columns
Open in standard view 
OSPF global Vars for every ospf process.
raisecomOspfGlobalEntry entry .1.3.6.1.4.1.8886.1.47.2.1.1
OSPF global Vars for every ospf process.
Indexes
raisecomOspfProcessId
Column Syntax OID
raisecomOspfProcessId
A 32-bit unsigned integer uniquely identifying the
ospf process.
ProcessID
Textual Convention: ProcessID Unsigned32
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.8886.1.47.2.1.1.1
raisecomOspfRouterId
A 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interface addresses.

This object …
RouterIDr/w
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.8886.1.47.2.1.1.2
raisecomOspfAdminStat
The administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one interface;
'disabled' disables it on all interfaces.

This object is persistent…
SWITCH-TCEnableVar
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.47.2.1.1.3
raisecomOspfVersionNumber
The current version number of the OSPF protocol is 2.
Enumeration
Enumerated Values:
2version2
 .1.3.6.1.4.1.8886.1.47.2.1.1.4
raisecomOspfAreaBdrRtrStatus
A flag to note whether this router is an Area
Border Router.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.47.2.1.1.5
raisecomOspfASBdrRtrStatus
A flag to note whether this router is configured as
an Autonomous System Border Router.

This object is persistent and when written the
entity SHOULD save the change to non-volatile storage.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.47.2.1.1.6
raisecomOspfExternLsaCount
The number of external (LS type-5) link state
advertisements in the link state database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.1.1.7
raisecomOspfExternLsaCksumSum
The 32-bit sum of the LS checksums of
the external link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a
change in a router's link state database and
to c…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.1.1.8
raisecomOspfOriginateNewLsas
The number of new link state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.

Discontinuities in the value of this counter can
occur at re-i…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.1.1.9
raisecomOspfRxNewLsas
The number of link state advertisements received
that are determined to be new instantiations.
This number does not include newer instantiations
of self-originated link state advertisements.

Discontinuiti…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.1.1.10
raisecomOspfExtLsdbLimit
The maximum number of non-default
AS-external LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.

When the number of non-default AS-external LSAs
in a …
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8886.1.47.2.1.1.11
raisecomOspfExitOverflowInterval
The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external LSAs. When
set to 0, the router will not leave
…
PositiveInteger
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8886.1.47.2.1.1.12
raisecomOspfReferenceBandwidth
Reference bandwidth in millionbits/second for
calculating default interface metrics. The
default value is 100 MBPS.

This object is persistent and when written
the entity SHOULD save the change to non-vol…
millionbits per secondUnsigned32r/w
Constraints:
range: 1-4296967
 .1.3.6.1.4.1.8886.1.47.2.1.1.13
raisecomOspfAsLsaCount
The number of AS-scope link state
advertisements in the AS-scope link state database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.1.1.14
raisecomOspfAsLsaCksumSum
The 32-bit unsigned sum of the LS checksums of
the AS link state advertisements contained in the AS-scope
link state database. This sum can be used to determine
if there has been a change in a router's AS-scope link
st…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.1.1.15
raisecomOspfStubRouterSupport
The router's support for stub router functionality.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.47.2.1.1.16
raisecomOspfStubRouterAdvertisement
This object controls the advertisement of
stub router LSAs by the router. The value
doNotAdvertise will result in the advertisement
of a standard router LSA and is the default value.

This object is persi…
Enumeration
Enumerated Values:
1doNotAdvertise
2advertise
 .1.3.6.1.4.1.8886.1.47.2.1.1.17
raisecomOspfAdminDistance
The administrative distance of ospf process.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.8886.1.47.2.1.1.18
raisecomOspfSpfInterval
The number of seconds between two SPF calculation.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.8886.1.47.2.1.1.19
raisecomOspfReset
Reset ospf process by process ID.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.47.2.1.1.20
raisecomOspfExportMetric
The default metric of imporing route into ospf process.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.8886.1.47.2.1.1.21
raisecomOspfExportTag
The default tag of importing route into ospf process.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.1.1.22
raisecomOspfExportType
The default type of importing route into ospf process.
Enumerationr/w
Enumerated Values:
1type1
2type2
 .1.3.6.1.4.1.8886.1.47.2.1.1.23
raisecomOspfNetCounts
It bas been used to describe the total number of networks in OSPF process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.1.1.24
raisecomOspfAreaCounts
It bas been used to describe the number of areas in OSPF process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.1.1.25
raisecomOspfNssaAreaCounts
It bas been used to describe the number of NSSA areas in OSPF process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.1.1.26
raisecomOspfSpfCounts
It bas been used to describe the total number of SPF calculation in OSPF process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.1.1.27
raisecomOspfGlobalStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.1.1.28
raisecomOspfRedistributeRouteLimit
import limit of route.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8886.1.47.2.1.1.29

raisecomOspfAreaTable

table
.1.3.6.1.4.1.8886.1.47.2.2 · 1 row entry · 20 columns
Open in standard view 
Information describing the configured parameters and
cumulative statistics of the router's attached areas.
The interfaces and virtual links are configured
as part of these areas.  Area 0.0.0.0, by definition,
is the backbone area.
raisecomOspfAreaEntry entry .1.3.6.1.4.1.8886.1.47.2.2.1
Information describing the configured parameters and
cumulative statistics of one of the router's attached areas.
The interfaces and virtual links are configured as part of
these areas. Area 0.0.0.0, by definition, is …
Indexes
raisecomOspfProcessId raisecomOspfAreaId
Column Syntax OID
raisecomOspfAreaId
A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.2.1.1
raisecomOspfAuthType
The authentication type specified for an area.
OspfAuthenticationTyper/w
Textual Convention: OspfAuthenticationType Enumeration
Type Values:
0none
1simplePassword
2md5
 .1.3.6.1.4.1.8886.1.47.2.2.1.2
raisecomOspfImportAsExtern
Indicates if an area is a stub area, NSSA, or standard
area. Type-5 AS-external LSAs and type-11 Opaque LSAs are
not imported into stub areas or NSSAs. NSSAs import
AS-external data as type-7 LSAs
Enumeration
Enumerated Values:
1importExternal
2importNoExternal
3importNssa
 .1.3.6.1.4.1.8886.1.47.2.2.1.3
raisecomOspfSpfRuns
The number of times that the intra-area route
table has been calculated using this area's
link state database. This is typically done
using Dijkstra's algorithm.

Discontinuities in the value of this coun…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.2.1.4
raisecomOspfAreaBdrRtrCount
The total number of Area Border Routers reachable
within this area. This is initially zero and is
calculated in each Shortest Path First (SPF) pass.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.2.1.5
raisecomOspfAsBdrRtrCount
The total number of Autonomous System Border
Routers reachable within this area. This is
initially zero and is calculated in each SPF
pass.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.2.1.6
raisecomOspfAreaLsaCount
The total number of link state advertisements
in this area's link state database, excluding
AS-external LSAs.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.2.1.7
raisecomOspfAreaLsaCksumSum
The 32-bit sum of the link state
advertisements' LS checksums contained in this
area's link state database. This sum excludes
external (LS type-5) link state advertisements.
The sum can be used to determine if there ha…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.2.1.8
raisecomOspfAreaSummary
The variable ospfAreaSummary controls the
import of summary LSAs into stub and NSSA areas.
It has no effect on other areas.

If it is noAreaSummary, the router will not
originate summary LSAs into the stub…
Enumerationr/w
Enumerated Values:
1noAreaSummary
2sendAreaSummary
 .1.3.6.1.4.1.8886.1.47.2.2.1.9
raisecomOspfAreaNssaTranslatorRole
Indicates an NSSA border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs.
Enumerationr/w
Enumerated Values:
1always
2candidate
 .1.3.6.1.4.1.8886.1.47.2.2.1.10
raisecomOspfAreaNssaTranslatorState
Indicates if and how an NSSA border router is
performing NSSA translation of type-7 LSAs into type-5

LSAs. When this object is set to enabled, the NSSA Border
router's OspfAreaNssaExtTranslatorRole has b…
Enumeration
Enumerated Values:
1enabled
2elected
3disabled
 .1.3.6.1.4.1.8886.1.47.2.2.1.11
raisecomOspfAreaNssaTranslatorStabilityInterval
The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties.
secondsPositiveIntegerr/w
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8886.1.47.2.2.1.12
raisecomOspfAreaNssaTranslatorEvents
Indicates the number of translator state changes
that have occurred since the last boot-up.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at oth…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.2.1.13
raisecomOspfAreaDefaultCost
It indicates the cost of default route of NSSA area or
stub area.
BigMetricr/w
Textual Convention: BigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.8886.1.47.2.2.1.14
raisecomOspfAreaType
It has been used to describe the type of
area,area 0 indicates backbone, area that has virtual-links is
transmit area. When area is configured as stub,it's a stub area, and
same as nssa area.other areas are called no…
Enumeration
Enumerated Values:
1backbone
2normal
3stub
4nssa
5transmit
 .1.3.6.1.4.1.8886.1.47.2.2.1.15
raisecomOspfAreaAbrCount
It has been used to describe the number of ABR in this area.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.2.1.16
raisecomOspfAreaAsbrCount
It has been used to describe the number of ASBR in this area.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.2.1.17
raisecomOspfAreaStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.2.1.18
raisecomOspfAreaFilterInIpPrefixListName
Filter incoming summary lsa,the value of this object
indicates the name of an ip-prefix-list.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.8886.1.47.2.2.1.19
raisecomOspfAreaFilterOutIpPrefixListName
Filter outgoing summary lsa,the value of this object
indicates the name of an ip-prefix-list.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.8886.1.47.2.2.1.20

raisecomOspfNetWorkTable

table
.1.3.6.1.4.1.8886.1.47.2.3 · 1 row entry · 3 columns
Open in standard view 
The list of directly-connected networks which enable 
the OSPF function.
raisecomOspfNetWorkEntry entry .1.3.6.1.4.1.8886.1.47.2.3.1
Defines an entry in the raisecomOspfNetWorkTable.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.
Indexes
raisecomOspfProcessId raisecomOspfAreaId raisecomOspfNet raisecomOspfMask
Column Syntax OID
raisecomOspfNet
The IP address of the net or subnet indicated
by the range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.3.1.1
raisecomOspfMask
The subnet mask that pertains to the net or
subnet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.3.1.2
raisecomOspfNetWorkStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.3.1.3

raisecomOspfStubAreaTable

table
.1.3.6.1.4.1.8886.1.47.2.4 · 1 row entry · 3 columns
Open in standard view 
The set of metrics that will be advertised
by a default Area Border Router into a stub area.
raisecomOspfStubAreaEntry entry .1.3.6.1.4.1.8886.1.47.2.4.1
The metric for a given Type of Service that
will be advertised by a default Area Border
Router into a stub area.

Information in this table is persistent and when this object
is written the entity SHOULD sav…
Indexes
raisecomOspfProcessId raisecomOspfStubAreaId
Column Syntax OID
raisecomOspfStubAreaId
The 32-bit identifier for the stub area. On
creation, this can be derived from the
instance.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.4.1.1
raisecomOspfStubAreaOption
The option of STUB area.True means that ABR cann't send summary lsa to
stub area.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.47.2.4.1.2
raisecomOspfStubAreaStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.4.1.3

raisecomOspfNssaAreaTable

table
.1.3.6.1.4.1.8886.1.47.2.5 · 1 row entry · 3 columns
Open in standard view 
The set of metrics that will be advertised
by a default Area Border Router into a Nssa area.
raisecomOspfNssaAreaEntry entry .1.3.6.1.4.1.8886.1.47.2.5.1
The metric for a given Type of Service that
will be advertised by a default Area Border
Router into a Nssa area.

Information in this table is persistent and when this object
is written the entity SHOULD sav…
Indexes
raisecomOspfProcessId raisecomOspfNssaAreaId
Column Syntax OID
raisecomOspfNssaAreaId
The 32-bit identifier for the nssa area. On
creation, this can be derived from the
instance.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.5.1.1
raisecomOspfNssaAreaOption
The option of Nssa area. If first bit is set, Router should generate
default type-7 lsa; if second bit is set, nssa area cann't import ex-
ternal route; if third bit is set, ABR cann't send summary lsas to the
nssa area.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.47.2.5.1.2
raisecomOspfNssaAreaStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.5.1.3

raisecomOspfIfTable

table
.1.3.6.1.4.1.8886.1.47.2.6 · 1 row entry · 29 columns
Open in standard view 
The OSPF Interface Table describes the interfaces
from the viewpoint of OSPF.
It augments the ipAddrTable with OSPF specific information.
raisecomOspfIfEntry entry .1.3.6.1.4.1.8886.1.47.2.6.1
The OSPF interface entry describes one interface
from the viewpoint of OSPF.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.
Indexes
raisecomOspfProcessId raisecomOspfAddressLessIf
Column Syntax OID
raisecomOspfAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; this
variable takes the value 0 on interfaces with
IP addresses and the corresponding value of
ifIndex for interfaces having no IP addres…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8886.1.47.2.6.1.1
raisecomOspfIfIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.6.1.2
raisecomOspfIfAreaId
A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.6.1.3
raisecomOspfIfType
The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType.
Broadcast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies…
Enumerationr/w
Enumerated Values:
1broadcast
2nbma
3pointToPoint
5pointToMultipoint
 .1.3.6.1.4.1.8886.1.47.2.6.1.4
raisecomOspfIfAdminStat
The OSPF interface's administrative status.
The value formed on the interface, and the interface
will be advertised as an internal route to some area.
The value 'disabled' denotes that the interface is
external to OSPF.
Status
Textual Convention: Status Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.8886.1.47.2.6.1.5
raisecomOspfIfRtrPriority
The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligible
to become the designated router on t…
DesignatedRouterPriorityr/w
Textual Convention: DesignatedRouterPriority Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.47.2.6.1.6
raisecomOspfIfTransitDelay
The estimated number of seconds it takes to
transmit a link state update packet over this
interface. Note that the minimal value SHOULD be
1 second.
secondsUpToMaxAger/w
Textual Convention: UpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.8886.1.47.2.6.1.7
raisecomOspfIfRetransInterval
The number of seconds between link state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting

database description and Link State reques…
secondsUpToMaxAger/w
Textual Convention: UpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.8886.1.47.2.6.1.8
raisecomOspfIfHelloInterval
The length of time, in seconds, between the Hello packets
that the router sends on the interface. This value must be
the same for all routers attached to a common network.
secondsHelloRanger/w
Textual Convention: HelloRange Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.8886.1.47.2.6.1.9
raisecomOspfIfRtrDeadInterval
The number of seconds that a router's Hello packets have
not been seen before its neighbors declare the router down.
This should be some multiple of the Hello interval. This
value must be the same for all routers attac…
secondsPositiveIntegerr/w
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8886.1.47.2.6.1.10
raisecomOspfIfPollInterval
The larger time interval, in seconds, between the Hello
packets sent to an inactive non-broadcast multi-access
neighbor.
secondsPositiveIntegerr/w
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8886.1.47.2.6.1.11
raisecomOspfIfState
The OSPF Interface State.
Enumeration
Enumerated Values:
1down
2loopback
3waiting
4pointToPoint
5designatedRouter
6backupDesignatedRouter
7otherDesignatedRouter
 .1.3.6.1.4.1.8886.1.47.2.6.1.12
raisecomOspfIfDesignatedRouter
The IP address of the designated router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.6.1.13
raisecomOspfIfBackupDesignatedRouter
The IP address of the backup designated
router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.6.1.14
raisecomOspfIfEvents
The number of times this OSPF interface has
changed its state or an error has occurred.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.6.1.15
raisecomOspfIfAuthKeyId
The key id of md5 authentication.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8886.1.47.2.6.1.16
raisecomOspfIfAuthSimpleKeyType
The type of password for simple authentication.
Enumerationr/w
Enumerated Values:
0plain
7cipher
 .1.3.6.1.4.1.8886.1.47.2.6.1.17
raisecomOspfIfAuthMd5KeyType
The type of password for md5 authentication.
Enumerationr/w
Enumerated Values:
0plain
7cipher
 .1.3.6.1.4.1.8886.1.47.2.6.1.18
raisecomOspfIfAuthSimpleKey
The password used as an OSPF
authentication key when simple password security
is enabled.
OctetStringr/w
Constraints:
range: 0-68
 .1.3.6.1.4.1.8886.1.47.2.6.1.19
raisecomOspfIfAuthMd5Key
The password used as an OSPF
authentication key when md5 security
is enabled.
OctetStringr/w
Constraints:
range: 0-68
 .1.3.6.1.4.1.8886.1.47.2.6.1.20
raisecomOspfIfAuthKeyChain
The name of key chain.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.8886.1.47.2.6.1.21
raisecomOspfIfAuthType
The authentication type specified for an interface.

Note that this object can be used to engage
in significant attacks against an OSPF router.
OspfAuthenticationTyper/w
Textual Convention: OspfAuthenticationType Enumeration
Type Values:
0none
1simplePassword
2md5
 .1.3.6.1.4.1.8886.1.47.2.6.1.22
raisecomOspfIfLsaCount
The total number of link-local link state advertisements
in this interface's link-local link state database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.6.1.23
raisecomOspfIfLsaCksumSum
The 32-bit unsigned sum of the Link State
Advertisements' LS checksums contained in this
interface's link-local link state database.
The sum can be used to determine if there has
been a change in the interface's link st…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.6.1.24
raisecomOspfIfDesignatedRouterId
The Router ID of the designated router.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.8886.1.47.2.6.1.25
raisecomOspfIfBackupDesignatedRouterId
The Router ID of the backup designated router.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.8886.1.47.2.6.1.26
raisecomOspfIfPassive
Indicate the interface is a passive interface.
SWITCH-TCEnableVarr/w
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.47.2.6.1.27
raisecomOspfIfMtu
Indicate ignore the interface's mtu.
SWITCH-TCEnableVarr/w
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.47.2.6.1.28
raisecomOspfIfMetric
The metric of using this Type of Service on
this interface. The default value of the TOS 0
metric is 10^8 / ifSpeed.
Metricr/w
Textual Convention: Metric Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.8886.1.47.2.6.1.29

raisecomOspfVirtIfTable

table
.1.3.6.1.4.1.8886.1.47.2.7 · 1 row entry · 19 columns
Open in standard view 
Information about this router's virtual interfaces
that the OSPF Process is configured to carry on.
raisecomOspfVirtIfEntry entry .1.3.6.1.4.1.8886.1.47.2.7.1
Information about a single virtual interface.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.
Indexes
raisecomOspfProcessId raisecomOspfVirtIfAreaId raisecomOspfVirtIfNeighbor
Column Syntax OID
raisecomOspfVirtIfAreaId
The transit area that the virtual link
traverses. By definition, this is not 0.0.0.0.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.7.1.1
raisecomOspfVirtIfNeighbor
The Router ID of the virtual neighbor.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.8886.1.47.2.7.1.2
raisecomOspfVirtIfTransitDelay
The estimated number of seconds it takes to
transmit a Link State update packet over this
interface. Note that the minimal value SHOULD be
1 second.
secondsUpToMaxAger/w
Textual Convention: UpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.8886.1.47.2.7.1.3
raisecomOspfVirtIfRetransInterval
The number of seconds between link state
avertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and Link State request packets. This…
secondsUpToMaxAger/w
Textual Convention: UpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.8886.1.47.2.7.1.4
raisecomOspfVirtIfHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor.
secondsHelloRanger/w
Textual Convention: HelloRange Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.8886.1.47.2.7.1.5
raisecomOspfVirtIfRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neig…
secondsPositiveIntegerr/w
Textual Convention: PositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8886.1.47.2.7.1.6
raisecomOspfVirtIfState
OSPF virtual interface states.
Enumeration
Enumerated Values:
1down
4pointToPoint
 .1.3.6.1.4.1.8886.1.47.2.7.1.7
raisecomOspfVirtIfEvents
The number of state changes or error events on
this virtual link.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.7.1.8
raisecomOspfVirtIfAuthKeyId
The key id of md5 authentication.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8886.1.47.2.7.1.9
raisecomOspfVirtIfAuthSimpleKeyType
The type of password for simple authentication.
Enumerationr/w
Enumerated Values:
0plain
7cipher
 .1.3.6.1.4.1.8886.1.47.2.7.1.10
raisecomOspfVirtIfAuthMd5KeyType
The type of password for md5 authentication.
Enumerationr/w
Enumerated Values:
0plain
7cipher
 .1.3.6.1.4.1.8886.1.47.2.7.1.11
raisecomOspfVirtIfAuthSimpleKey
The password used as an OSPF
authentication key when simple password security
is enabled.
OctetStringr/w
Constraints:
range: 0-68
 .1.3.6.1.4.1.8886.1.47.2.7.1.12
raisecomOspfVirtIfAuthMd5Key
The password used as an OSPF
authentication key when md5 security
is enabled.
OctetStringr/w
Constraints:
range: 0-68
 .1.3.6.1.4.1.8886.1.47.2.7.1.13
raisecomOspfVirtIfAuthKeyChain
The name of key chain.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.8886.1.47.2.7.1.14
raisecomOspfVirtIfAuthType
The authentication type specified for a virtual interface.

Note that this object can be used to engage
in significant attacks against an OSPF router.
OspfAuthenticationTyper/w
Textual Convention: OspfAuthenticationType Enumeration
Type Values:
0none
1simplePassword
2md5
 .1.3.6.1.4.1.8886.1.47.2.7.1.15
raisecomOspfVirtIfLsaCount
The total number of link-local link state advertisements
in this virtual interface's link-local link state database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.7.1.16
raisecomOspfVirtIfLsaCksumSum
The 32-bit unsigned sum of the link state
advertisements' LS checksums contained in this
virtual interface's link-local link state database.
The sum can be used to determine if there has
been a change in the virtual int…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.7.1.17
raisecomOspfVirtIfCost
It has been used to describe the cost of
virtual interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8886.1.47.2.7.1.18
raisecomOspfVirtIfStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.7.1.19

raisecomOspfNbrTable

table
.1.3.6.1.4.1.8886.1.47.2.8 · 1 row entry · 9 columns
Open in standard view 
A table describing all non-virtual neighbors
in the locality of the OSPF router.
raisecomOspfNbrEntry entry .1.3.6.1.4.1.8886.1.47.2.8.1
The information regarding a single neighbor.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.
Indexes
raisecomOspfProcessId raisecomOspfNbrIpAddr
Column Syntax OID
raisecomOspfNbrIpAddr
The IP address this neighbor is using in its
IP source address. Note that, on addressless
links, this will not be 0.0.0.0 but the

address of another of the neighbor's interfaces.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.8.1.1
raisecomOspfNbrAddressLessIndex
On an interface having an IP address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.8886.1.47.2.8.1.2
raisecomOspfNbrRtrId
A 32-bit integer (represented as a type
IpAddress) uniquely identifying the neighboring
router in the Autonomous System.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.8886.1.47.2.8.1.3
raisecomOspfNbrOptions
A bit mask corresponding to the neighbor's
options field.

Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.8.1.4
raisecomOspfNbrPriority
The priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become
the designated router on this particular network.
DesignatedRouterPriority
Textual Convention: DesignatedRouterPriority Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.47.2.8.1.5
raisecomOspfNbrState
The state of the relationship with this neighbor.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.8886.1.47.2.8.1.6
raisecomOspfNbrEvents
The number of times this neighbor relationship
has changed state or an error has occurred.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at othe…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.8.1.7
raisecomOspfNbrLsRetransQLen
The current length of the retransmission
queue.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.8.1.8
raisecomOspfNbrMode
It has been used to describe the master-slave mode of
neighbor.
Enumeration
Enumerated Values:
1slave
2master
 .1.3.6.1.4.1.8886.1.47.2.8.1.9

raisecomOspfNbmaCfgNbrTable

table
.1.3.6.1.4.1.8886.1.47.2.9 · 1 row entry · 3 columns
Open in standard view 
A table describing all configured neigbors on nbma network.
raisecomOspfNbmaCfgNbrEntry entry .1.3.6.1.4.1.8886.1.47.2.9.1
The information regarding a Configured neighbor.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.
Indexes
raisecomOspfProcessId raisecomOspfNbmaCfgNbrIpAddr
Column Syntax OID
raisecomOspfNbmaCfgNbrIpAddr
The IP address this neighbor is using in its
IP source address. Note that, on addressless
links, this will not be 0.0.0.0 but the
address of another of the neighbor's interfaces.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.9.1.1
raisecomOspfNbmaCfgNbrPriority
The priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become
the designated router on this particular network.
DesignatedRouterPriorityr/w
Textual Convention: DesignatedRouterPriority Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8886.1.47.2.9.1.2
raisecomOspfNbmaCfgNbrStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.9.1.3

raisecomOspfVirtNbrTable

table
.1.3.6.1.4.1.8886.1.47.2.10 · 1 row entry · 9 columns
Open in standard view 
This table describes all virtual neighbors.
Since virtual links are configured
in the Virtual Interface Table, this table is read-only.
raisecomOspfVirtNbrEntry entry .1.3.6.1.4.1.8886.1.47.2.10.1
Virtual neighbor information.
Indexes
raisecomOspfProcessId raisecomOspfVirtNbrArea raisecomOspfVirtNbrRtrId
Column Syntax OID
raisecomOspfVirtNbrArea
The Transit Area Identifier.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.10.1.1
raisecomOspfVirtNbrRtrId
A 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.8886.1.47.2.10.1.2
raisecomOspfVirtNbrIpAddr
The IP address this virtual neighbor is using.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.10.1.3
raisecomOspfVirtNbrOptions
A bit mask corresponding to the neighbor's
options field.

Bit 1, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.10.1.4
raisecomOspfVirtNbrState
The state of the virtual neighbor relationship.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.8886.1.47.2.10.1.5
raisecomOspfVirtNbrEvents
The number of times this virtual link has
changed its state or an error has occurred.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
tim…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.10.1.6
raisecomOspfVirtNbrLsRetransQLen
The current length of the retransmission
queue.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.10.1.7
raisecomOspfVirtNbrLessIf
It has been used to describe the out interface index of
this virtual neighbor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.10.1.8
raisecomOspfVirtNbrMode
It has been used to describe the master-slave mode of
virtual neighbor.
Enumeration
Enumerated Values:
1slave
2master
 .1.3.6.1.4.1.8886.1.47.2.10.1.9

raisecomOspfAreaAggregateTable

table
.1.3.6.1.4.1.8886.1.47.2.11 · 1 row entry · 6 columns
Open in standard view 
The Area Aggregate Table acts as an adjunct
to the Area Table.  It describes those address aggregates
that are configured to be propagated from an area.
Its purpose is to reduce the amount of information
that is known beyond an Area's borders.
          
It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
          
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one.
raisecomOspfAreaAggregateEntry entry .1.3.6.1.4.1.8886.1.47.2.11.1
A single area aggregate entry.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.
Indexes
raisecomOspfProcessId raisecomOspfAreaAggregateAreaID raisecomOspfAreaAggregateLsdbType raisecomOspfAreaAggregateNet raisecomOspfAreaAggregateMask
Column Syntax OID
raisecomOspfAreaAggregateAreaID
The area within which the address aggregate is to be
found.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.11.1.1
raisecomOspfAreaAggregateLsdbType
The type of the address aggregate. This field
specifies the Lsdb type that this address
aggregate applies to.
Enumeration
Enumerated Values:
3summaryLink
7nssaExternalLink
 .1.3.6.1.4.1.8886.1.47.2.11.1.2
raisecomOspfAreaAggregateNet
The IP address of the net or subnet indicated
by the range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.11.1.3
raisecomOspfAreaAggregateMask
The subnet mask that pertains to the net or
subnet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.11.1.4
raisecomOspfAreaAggregateEffect
Subnets subsumed by ranges either trigger the
advertisement of the indicated aggregate
(advertiseMatching) or result in the subnet's not
being advertised at all outside the area.
Enumerationr/w
Enumerated Values:
1advertiseMatching
2doNotAdvertiseMatching
 .1.3.6.1.4.1.8886.1.47.2.11.1.5
raisecomOspfAreaAggregateStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.11.1.6

raisecomOspfExternalAggregateTable

table
.1.3.6.1.4.1.8886.1.47.2.12 · 1 row entry · 5 columns
Open in standard view 
It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
          
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one.
raisecomOspfExternalAggregateEntry entry .1.3.6.1.4.1.8886.1.47.2.12.1
A single external aggregate entry.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.
Indexes
raisecomOspfProcessId raisecomOspfExternalAggregateNet raisecomOspfExternalAggregateMask
Column Syntax OID
raisecomOspfExternalAggregateNet
The IP address of the net or subnet indicated
by the range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.12.1.1
raisecomOspfExternalAggregateMask
The subnet mask that pertains to the net or
subnet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.12.1.2
raisecomOspfExternalAggregateEffect
This object controls the advertisement of external route summary.
Enumerationr/w
Enumerated Values:
1doNotAdvertise
2advertise
 .1.3.6.1.4.1.8886.1.47.2.12.1.3
raisecomOspfExternalAggregateCost
It indicates the cost of d external route summary.
BigMetricr/w
Textual Convention: BigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.8886.1.47.2.12.1.4
raisecomOspfExternalAggregateStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.12.1.5

raisecomOspfLsdbTable

table
.1.3.6.1.4.1.8886.1.47.2.13 · 1 row entry · 8 columns
Open in standard view 
The OSPF Process's link state database (LSDB).
The LSDB contains the link state advertisements
from throughout the areas that the device is attached to.
raisecomOspfLsdbEntry entry .1.3.6.1.4.1.8886.1.47.2.13.1
A single link state advertisement.
Indexes
raisecomOspfProcessId raisecomOspfLsdbAreaId raisecomOspfLsdbType raisecomOspfLsdbLsId raisecomOspfLsdbRouterId
Column Syntax OID
raisecomOspfLsdbAreaId
The 32-bit identifier of the area from which
the LSA was received.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.13.1.1
raisecomOspfLsdbType
The type of the link state advertisement.
Each link state type has a separate advertisement
format.

Note: External link state advertisements are permitted
for backward compatibility, but should be display…
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
10areaOpaqueLink
 .1.3.6.1.4.1.8886.1.47.2.13.1.2
raisecomOspfLsdbLsId
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.13.1.3
raisecomOspfLsdbRouterId
The 32-bit number that uniquely identifies the
originating router in the Autonomous System.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.8886.1.47.2.13.1.4
raisecomOspfLsdbSequence
The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.13.1.5
raisecomOspfLsdbAge
This field is the age of the link state advertisement
in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.13.1.6
raisecomOspfLsdbChecksum
This field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. The checksu…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.13.1.7
raisecomOspfLsdbAdvertisement
The entire link state advertisement, including
its header.

Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8886.1.47.2.13.1.8

raisecomOspfAsLsdbTable

table
.1.3.6.1.4.1.8886.1.47.2.14 · 1 row entry · 7 columns
Open in standard view 
The OSPF Process's AS-scope LSA link state database.
The database contains the AS-scope Link State
Advertisements from throughout the areas that
the device is attached to.
          
This table is identical to the OSPF LSDB Table
in format, but contains only AS-scope Link State
Advertisements.  The purpose is to allow AS-scope
LSAs to be displayed once for the router rather
than once in each non-stub area.
raisecomOspfAsLsdbEntry entry .1.3.6.1.4.1.8886.1.47.2.14.1
A single link state advertisement.
Indexes
raisecomOspfProcessId raisecomOspfAsLsdbType raisecomOspfAsLsdbLsId raisecomOspfAsLsdbRouterId
Column Syntax OID
raisecomOspfAsLsdbType
The type of the link state advertisement.
Each link state type has a separate
advertisement format.
Enumeration
Enumerated Values:
5asExternalLink
 .1.3.6.1.4.1.8886.1.47.2.14.1.1
raisecomOspfAsLsdbLsId
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;

it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.14.1.2
raisecomOspfAsLsdbRouterId
The 32-bit number that uniquely identifies the
originating router in the Autonomous System.
RouterID
Textual Convention: RouterID OctetString
 .1.3.6.1.4.1.8886.1.47.2.14.1.3
raisecomOspfAsLsdbSequence
The sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.14.1.4
raisecomOspfAsLsdbAge
This field is the age of the link state
advertisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.14.1.5
raisecomOspfAsLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksu…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.14.1.6
raisecomOspfAsLsdbAdvertisement
The entire link state advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8886.1.47.2.14.1.7

raisecomOspfAreaLsaCountTable

table
.1.3.6.1.4.1.8886.1.47.2.15 · 1 row entry · 3 columns
Open in standard view 
This table maintains per-area, per-LSA-type counters
raisecomOspfAreaLsaCountEntry entry .1.3.6.1.4.1.8886.1.47.2.15.1
An entry with a number of link advertisements
of a given type for a given area.
Indexes
raisecomOspfProcessId raisecomOspfAreaLsaCountAreaId raisecomOspfAreaLsaCountLsaType
Column Syntax OID
raisecomOspfAreaLsaCountAreaId
This entry Area ID.
AreaID
Textual Convention: AreaID OctetString
 .1.3.6.1.4.1.8886.1.47.2.15.1.1
raisecomOspfAreaLsaCountLsaType
This entry LSA type.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
6multicastLink
7nssaExternalLink
10areaOpaqueLink
 .1.3.6.1.4.1.8886.1.47.2.15.1.2
raisecomOspfAreaLsaCountNumber
Number of LSAs of a given type for a given area.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.47.2.15.1.3

raisecomOspfRedistributeTable

table
.1.3.6.1.4.1.8886.1.47.2.16 · 1 row entry · 7 columns
Open in standard view 
Import external route to ospf protocol.
raisecomOspfRedistributeEntry entry .1.3.6.1.4.1.8886.1.47.2.16.1
Define an entry in the raisecomOspfRedistributeTable
Indexes
raisecomOspfProcessId raisecomOspfRedistributeProtocol raisecomOspfRedistributeProcessId
Column Syntax OID
raisecomOspfRedistributeProtocol
Route protocol to import, only support static, connect,
rip and ospf now.
Enumeration
Enumerated Values:
2local
3netmgmt
8rip
13ospf
 .1.3.6.1.4.1.8886.1.47.2.16.1.1
raisecomOspfRedistributeProcessId
Process id of import route protocol, only support ospf.
ProcessID
Textual Convention: ProcessID Unsigned32
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.8886.1.47.2.16.1.2
raisecomOspfRedistributeCost
The cost of import route.
BigMetricr/w
Textual Convention: BigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.8886.1.47.2.16.1.3
raisecomOspfRedistributeType
The type of external route.
Enumerationr/w
Enumerated Values:
1e1
2e2
 .1.3.6.1.4.1.8886.1.47.2.16.1.4
raisecomOspfRedistributeStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.16.1.5
raisecomOspfRedistributeRouteMapName
Specify a route-map.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.8886.1.47.2.16.1.6
raisecomOspfRedistributeTag
Set tag of route.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8886.1.47.2.16.1.7

raisecomOspfDefaultInfoTable

table
.1.3.6.1.4.1.8886.1.47.2.17 · 1 row entry · 4 columns
Open in standard view 
The table generate or delete the default route.
raisecomOspfDefaultInfoEntry entry .1.3.6.1.4.1.8886.1.47.2.17.1
Define an entry in the raisecomOspfDefaultInfoTable
Indexes
raisecomOspfProcessId
Column Syntax OID
raisecomOspfDefaultInfoAlways
Whether always inform default route.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.1.47.2.17.1.1
raisecomOspfDefaultInfoCost
It indicates the cost of default route.
BigMetricr/w
Textual Convention: BigMetric Integer32
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.8886.1.47.2.17.1.2
raisecomOspfDefaultInfoType
It indicates the type of default route.
Enumerationr/w
Enumerated Values:
1e1
2e2
 .1.3.6.1.4.1.8886.1.47.2.17.1.3
raisecomOspfDefaultInfoStatus
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.

The value of this object has no effect on
whether other objects in this conceptual …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.17.1.4

raisecomOspfPacketIoStatisTable

table
.1.3.6.1.4.1.8886.1.47.2.18 · 1 row entry · 3 columns
Open in standard view 
The table is used to storage all kinds of 
input and output packet statistical information of 
OSPF process.
raisecomOspfPacketIoStatisEntry entry .1.3.6.1.4.1.8886.1.47.2.18.1
Define an entry in the raisecomOspfPacketIoStatisTable
Indexes
raisecomOspfProcessId raisecomOspfPacketIoStatisIoType raisecomOspfPacketIoStatisPktType
Column Syntax OID
raisecomOspfPacketIoStatisIoType
It has been used to describe the IO direction of
packet.
Enumeration
Enumerated Values:
1input
2output
 .1.3.6.1.4.1.8886.1.47.2.18.1.1
raisecomOspfPacketIoStatisPktType
It has been used to describe the type of
OSPF packet.
Enumeration
Enumerated Values:
1hello
2dbDescript
3lsReq
4lsUpdate
5lsAck
 .1.3.6.1.4.1.8886.1.47.2.18.1.2
raisecomOspfPacketIoStatisNumber
The number indicates the number of specified type of
packets on input or output direction.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.18.1.3

raisecomOspfRouteTable

table
.1.3.6.1.4.1.8886.1.47.2.19 · 1 row entry · 8 columns
Open in standard view 
The table is used to storage OSPF calculation of routing table.
raisecomOspfRouteEntry entry .1.3.6.1.4.1.8886.1.47.2.19.1
Define an entry in the raisecomOspfRouteTable
Indexes
raisecomOspfProcessId raisecomOspfRouteDest raisecomOspfRouteMask raisecomOspfRouteType
Column Syntax OID
raisecomOspfRouteDest
It has been used to describe the destination address of
an ospf route.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.19.1.1
raisecomOspfRouteMask
It has been used to describe the mask of
an ospf route.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.19.1.2
raisecomOspfRouteType
It has been used to describe the type of
an ospf route.
Enumeration
Enumerated Values:
1network
2ase
3nssa
 .1.3.6.1.4.1.8886.1.47.2.19.1.3
raisecomOspfRouteLsType
It has been used to describe the LSA type of
a router.
Enumeration
Enumerated Values:
0stub
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
10areaOpaqueLink
 .1.3.6.1.4.1.8886.1.47.2.19.1.4
raisecomOspfRouteMetric
It has been used to describe the metric of
an ospf route.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.19.1.5
raisecomOspfRouteNextHop
It has been used to describe the nexthop address of
an ospf route.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.19.1.6
raisecomOspfRouteAdvRtr
It has been used to describe the advertising router of
an ospf route.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.19.1.7
raisecomOspfRouteArea
It has been used to describe the ccmputing area of
an ospf route.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.19.1.8

raisecomOspfBdrRouteTable

table
.1.3.6.1.4.1.8886.1.47.2.20 · 1 row entry · 6 columns
Open in standard view 
The table is used to storage the imformation of boder router.
raisecomOspfBdrRouteEntry entry .1.3.6.1.4.1.8886.1.47.2.20.1
Define an entry in the raisecomOspfBdrRouteTable
Indexes
raisecomOspfProcessId raisecomOspfBdrRouteRtrType raisecomOspfBdrRouteArea raisecomOspfBdrRouteDest raisecomOspfBdrRouteNextHop
Column Syntax OID
raisecomOspfBdrRouteRtrType
It has been used to describe the type of
a boder router.
Enumeration
Enumerated Values:
1asbr
2abr
3sumasbr
 .1.3.6.1.4.1.8886.1.47.2.20.1.1
raisecomOspfBdrRouteArea
It has been used to describe the area of
a boder router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.20.1.2
raisecomOspfBdrRouteDest
It has been used to describe the boder router by
it's router id.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.20.1.3
raisecomOspfBdrRouteNextHop
IIt has been used to describe the nexthop router to
reach a boder router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.47.2.20.1.4
raisecomOspfBdrRouteLsType
It has been used to describe the LSA type of
a boder router.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
10areaOpaqueLink
 .1.3.6.1.4.1.8886.1.47.2.20.1.5
raisecomOspfBdrRouteMetric
It has been used to describe the metric to
a boder router.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.20.1.6

raisecomOspfDistributeListInTable

table
.1.3.6.1.4.1.8886.1.47.2.21.1 · 1 row entry · 3 columns
Open in standard view 
The table is used to config and check distribute-in policy.
raisecomOspfDistributeListInEntry entry .1.3.6.1.4.1.8886.1.47.2.21.1.1
Define an entry in the raisecomOspfDistributeListInTable
Indexes
raisecomOspfProcessId
Column Syntax OID
raisecomOspfDistrInIpPrefixListName
Filter incoming routing updates,the value of this
object indicates the name of an ip-prefix-list.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.8886.1.47.2.21.1.1.1
raisecomOspfDistrInAclNum
Filter incoming routing updates by the IP ACL number of OSPF distribute-in policy,
-1 is a value to inditace no setting of acl.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.21.1.1.2
raisecomOspfDistrInRowStatus
This object permits management of the table by
facilitating actions such as row creation,construction,
and destruction.The value of this object has no effect
on whether other objects in this conceptual row can be
modi…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.21.1.1.3

raisecomOspfDistributeListOutTable

table
.1.3.6.1.4.1.8886.1.47.2.21.2 · 1 row entry · 3 columns
Open in standard view 
The table is used to config and check distribute-out policy.
raisecomOspfDistributeListOutEntry entry .1.3.6.1.4.1.8886.1.47.2.21.2.1
Define an entry in the raisecomOspfDistributeListOutTable
Indexes
raisecomOspfProcessId
Column Syntax OID
raisecomOspfDistrOutIpPrefixListName
Filter outgoing routing updates,the value of this object
indicates the name of an ip-prefix-list.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.8886.1.47.2.21.2.1.1
raisecomOspfDistrOutAclNum
Filter incoming outgoing updates by the IP ACL number of OSPF distribute-out policy,
-1 is a value to inditace no setting of acl.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.21.2.1.2
raisecomOspfDistrOutRowStatus
This object permits management of the table by
facilitating actions such as row creation,construction,
and destruction. The value of this object has no effect
on whether other objects in this conceptual row can be
mo…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.21.2.1.3

raisecomOspfDistributeListOutProtocolTable

table
.1.3.6.1.4.1.8886.1.47.2.21.3 · 1 row entry · 5 columns
Open in standard view 
The table is used to config and check distribute-out policy based on protocol.
raisecomOspfDistributeListOutProtocolEntry entry .1.3.6.1.4.1.8886.1.47.2.21.3.1
Define an entry in the raisecomOspfDistributeListOutProtocolTable
Indexes
raisecomOspfProcessId raisecomOspfDistrOutProtocol raisecomOspfDistrOutProcessId
Column Syntax OID
raisecomOspfDistrOutProtocol
Imported route protocol, only support static, connect,
rip and ospf now.
Enumeration
Enumerated Values:
2local
3netmgmt
8rip
13ospf
 .1.3.6.1.4.1.8886.1.47.2.21.3.1.1
raisecomOspfDistrOutProcessId
Process id of imported route protocol, only support ospf.
ProcessID
Textual Convention: ProcessID Unsigned32
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.8886.1.47.2.21.3.1.2
raisecomOspfDistrOutProIpPrefixListName
Filtering outgoing updates based on imported protocol, the value
of this object indicates the name of an ip-prefix-list.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.8886.1.47.2.21.3.1.3
raisecomOspfDistrOutProAclNum
Filtering outgoing updates based on imported protocol, the value of this object
indicates the IP ACL number, -1 is a value to inditace no setting of acl.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.47.2.21.3.1.4
raisecomOspfDistrOutProRowStatus
This object permits management of the table by
facilitating actions such as row creation,construction,
and destruction.The value of this object has no effect
on whether other objects in this conceptual row can be
mod…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8886.1.47.2.21.3.1.5