raisecomOspfAdminStat
RAISECOM-OSPFV2-MIB ·
.1.3.6.1.4.1.8886.1.47.2.1.1.3
Object
column
SWITCH-TCEnableVar
The administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one interface;
'disabled' disables it on all interfaces.
This object is persistent and when written
the entity SHOULD save the change to non-volatile storage.
Context
- MIB
- RAISECOM-OSPFV2-MIB
- OID
.1.3.6.1.4.1.8886.1.47.2.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- raisecomOspfGlobalEntry
- Table
- raisecomOspfGlobalTable
- Siblings
- 28
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomOspfProcessId A 32-bit unsigned integer uniquely identifying the
ospf process. | column | ProcessID | .1.3.6.1.4.1.8886.1.47.2.1.1.1 |
| raisecomOspfRxNewLsas The number of link state advertisements received
that are determined to be new instantiations.
This number does not include newer instantiations
of self-originated link state adve… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.1.47.2.1.1.10 |
| raisecomOspfExtLsdbLimit The maximum number of non-default
AS-external LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the numb… | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.11 |
| raisecomOspfExitOverflowInterval The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external LSAs. W… | column | PositiveInteger | .1.3.6.1.4.1.8886.1.47.2.1.1.12 |
| raisecomOspfReferenceBandwidth Reference bandwidth in millionbits/second for
calculating default interface metrics. The
default value is 100 MBPS.
This object is persistent and when written
the … | column | millionbits per second Unsigned32 | .1.3.6.1.4.1.8886.1.47.2.1.1.13 |
| raisecomOspfAsLsaCount The number of AS-scope link state
advertisements in the AS-scope link state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.1.47.2.1.1.14 |
| raisecomOspfAsLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the AS link state advertisements contained in the AS-scope
link state database. This sum can be used to determine
if there has been… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.47.2.1.1.15 |
| raisecomOspfStubRouterSupport The router's support for stub router functionality. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.47.2.1.1.16 |
| raisecomOspfStubRouterAdvertisement This object controls the advertisement of
stub router LSAs by the router. The value
doNotAdvertise will result in the advertisement
of a standard router LSA and is the default va… | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.1.1.17 |
| raisecomOspfAdminDistance The administrative distance of ospf process. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.18 |
| raisecomOspfSpfInterval The number of seconds between two SPF calculation. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.19 |
| raisecomOspfRouterId A 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interfac… | column | RouterID | .1.3.6.1.4.1.8886.1.47.2.1.1.2 |
| raisecomOspfReset Reset ospf process by process ID. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.47.2.1.1.20 |
| raisecomOspfExportMetric The default metric of imporing route into ospf process. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.21 |
| raisecomOspfExportTag The default tag of importing route into ospf process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.22 |
| raisecomOspfExportType The default type of importing route into ospf process. | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.1.1.23 |
| raisecomOspfNetCounts It bas been used to describe the total number of networks in OSPF process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.24 |
| raisecomOspfAreaCounts It bas been used to describe the number of areas in OSPF process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.25 |
| raisecomOspfNssaAreaCounts It bas been used to describe the number of NSSA areas in OSPF process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.26 |
| raisecomOspfSpfCounts It bas been used to describe the total number of SPF calculation in OSPF process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.27 |
| raisecomOspfGlobalStatus This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8886.1.47.2.1.1.28 |
| raisecomOspfRedistributeRouteLimit import limit of route. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.29 |
| raisecomOspfVersionNumber The current version number of the OSPF protocol is 2. | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.1.1.4 |
| raisecomOspfAreaBdrRtrStatus A flag to note whether this router is an Area
Border Router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.47.2.1.1.5 |
| raisecomOspfASBdrRtrStatus A flag to note whether this router is configured as
an Autonomous System Border Router.
This object is persistent and when written the
entity SHOULD save the change… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.47.2.1.1.6 |
| raisecomOspfExternLsaCount The number of external (LS type-5) link state
advertisements in the link state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.1.47.2.1.1.7 |
| raisecomOspfExternLsaCksumSum The 32-bit sum of the LS checksums of
the external link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a
change in… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.8 |
| raisecomOspfOriginateNewLsas The number of new link state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.
Discontinuities in the… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.1.47.2.1.1.9 |