raisecomOspfIfAreaId
RAISECOM-OSPFV2-MIB ·
.1.3.6.1.4.1.8886.1.47.2.6.1.3
Object
column
AreaID
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
Context
- MIB
- RAISECOM-OSPFV2-MIB
- OID
.1.3.6.1.4.1.8886.1.47.2.6.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- raisecomOspfIfEntry
- Table
- raisecomOspfIfTable
- Siblings
- 28
Syntax
AreaID
- Source
- AreaID
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomOspfAddressLessIf For the purpose of easing the instancing of
addressed and addressless interfaces; this
variable takes the value 0 on interfaces with
IP addresses and the corresponding value of
if… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.8886.1.47.2.6.1.1 |
| raisecomOspfIfRtrDeadInterval The number of seconds that a router's Hello packets have
not been seen before its neighbors declare the router down.
This should be some multiple of the Hello interval. This
valu… | column | seconds PositiveInteger | .1.3.6.1.4.1.8886.1.47.2.6.1.10 |
| raisecomOspfIfPollInterval The larger time interval, in seconds, between the Hello
packets sent to an inactive non-broadcast multi-access
neighbor. | column | seconds PositiveInteger | .1.3.6.1.4.1.8886.1.47.2.6.1.11 |
| raisecomOspfIfState The OSPF Interface State. | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.6.1.12 |
| raisecomOspfIfDesignatedRouter The IP address of the designated router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.1.47.2.6.1.13 |
| raisecomOspfIfBackupDesignatedRouter The IP address of the backup designated
router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.1.47.2.6.1.14 |
| raisecomOspfIfEvents The number of times this OSPF interface has
changed its state or an error has occurred.
Discontinuities in the value of this counter can occur
at re-initialization … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.1.47.2.6.1.15 |
| raisecomOspfIfAuthKeyId The key id of md5 authentication. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.6.1.16 |
| raisecomOspfIfAuthSimpleKeyType The type of password for simple authentication. | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.6.1.17 |
| raisecomOspfIfAuthMd5KeyType The type of password for md5 authentication. | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.6.1.18 |
| raisecomOspfIfAuthSimpleKey The password used as an OSPF
authentication key when simple password security
is enabled. | column | OctetString | .1.3.6.1.4.1.8886.1.47.2.6.1.19 |
| raisecomOspfIfIpAddress The IP address of this OSPF interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.1.47.2.6.1.2 |
| raisecomOspfIfAuthMd5Key The password used as an OSPF
authentication key when md5 security
is enabled. | column | OctetString | .1.3.6.1.4.1.8886.1.47.2.6.1.20 |
| raisecomOspfIfAuthKeyChain The name of key chain. | column | OctetString | .1.3.6.1.4.1.8886.1.47.2.6.1.21 |
| raisecomOspfIfAuthType The authentication type specified for an interface.
Note that this object can be used to engage
in significant attacks against an OSPF router. | column | OspfAuthenticationType | .1.3.6.1.4.1.8886.1.47.2.6.1.22 |
| raisecomOspfIfLsaCount The total number of link-local link state advertisements
in this interface's link-local link state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.1.47.2.6.1.23 |
| raisecomOspfIfLsaCksumSum The 32-bit unsigned sum of the Link State
Advertisements' LS checksums contained in this
interface's link-local link state database.
The sum can be used to determine if there has
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.47.2.6.1.24 |
| raisecomOspfIfDesignatedRouterId The Router ID of the designated router. | column | RouterID | .1.3.6.1.4.1.8886.1.47.2.6.1.25 |
| raisecomOspfIfBackupDesignatedRouterId The Router ID of the backup designated router. | column | RouterID | .1.3.6.1.4.1.8886.1.47.2.6.1.26 |
| raisecomOspfIfPassive Indicate the interface is a passive interface. | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.47.2.6.1.27 |
| raisecomOspfIfMtu Indicate ignore the interface's mtu. | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.47.2.6.1.28 |
| raisecomOspfIfMetric The metric of using this Type of Service on
this interface. The default value of the TOS 0
metric is 10^8 / ifSpeed. | column | Metric | .1.3.6.1.4.1.8886.1.47.2.6.1.29 |
| raisecomOspfIfType The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType.
Broadcast LANs, such as Ethernet and IEEE 802.5,
take the value 'b… | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.6.1.4 |
| raisecomOspfIfAdminStat The OSPF interface's administrative status.
The value formed on the interface, and the interface
will be advertised as an internal route to some area.
The value 'disabled' denotes… | column | Status | .1.3.6.1.4.1.8886.1.47.2.6.1.5 |
| raisecomOspfIfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi… | column | DesignatedRouterPriority | .1.3.6.1.4.1.8886.1.47.2.6.1.6 |
| raisecomOspfIfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. Note that the minimal value SHOULD be
1 second. | column | seconds UpToMaxAge | .1.3.6.1.4.1.8886.1.47.2.6.1.7 |
| raisecomOspfIfRetransInterval The number of seconds between link state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
da… | column | seconds UpToMaxAge | .1.3.6.1.4.1.8886.1.47.2.6.1.8 |
| raisecomOspfIfHelloInterval The length of time, in seconds, between the Hello packets
that the router sends on the interface. This value must be
the same for all routers attached to a common network. | column | seconds HelloRange | .1.3.6.1.4.1.8886.1.47.2.6.1.9 |