raisecomOspfGlobalStatus
RAISECOM-OSPFV2-MIB ·
.1.3.6.1.4.1.8886.1.47.2.1.1.28
Object
This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.
Context
- MIB
- RAISECOM-OSPFV2-MIB
- OID
.1.3.6.1.4.1.8886.1.47.2.1.1.28- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- raisecomOspfGlobalEntry
- Table
- raisecomOspfGlobalTable
- Siblings
- 28
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomOspfProcessId A 32-bit unsigned integer uniquely identifying the
ospf process. | column | ProcessID | .1.3.6.1.4.1.8886.1.47.2.1.1.1 |
| raisecomOspfRxNewLsas The number of link state advertisements received
that are determined to be new instantiations.
This number does not include newer instantiations
of self-originated link state adve… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.1.47.2.1.1.10 |
| raisecomOspfExtLsdbLimit The maximum number of non-default
AS-external LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the numb… | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.11 |
| raisecomOspfExitOverflowInterval The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external LSAs. W… | column | PositiveInteger | .1.3.6.1.4.1.8886.1.47.2.1.1.12 |
| raisecomOspfReferenceBandwidth Reference bandwidth in millionbits/second for
calculating default interface metrics. The
default value is 100 MBPS.
This object is persistent and when written
the … | column | millionbits per second Unsigned32 | .1.3.6.1.4.1.8886.1.47.2.1.1.13 |
| raisecomOspfAsLsaCount The number of AS-scope link state
advertisements in the AS-scope link state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.1.47.2.1.1.14 |
| raisecomOspfAsLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the AS link state advertisements contained in the AS-scope
link state database. This sum can be used to determine
if there has been… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.1.47.2.1.1.15 |
| raisecomOspfStubRouterSupport The router's support for stub router functionality. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.47.2.1.1.16 |
| raisecomOspfStubRouterAdvertisement This object controls the advertisement of
stub router LSAs by the router. The value
doNotAdvertise will result in the advertisement
of a standard router LSA and is the default va… | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.1.1.17 |
| raisecomOspfAdminDistance The administrative distance of ospf process. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.18 |
| raisecomOspfSpfInterval The number of seconds between two SPF calculation. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.19 |
| raisecomOspfRouterId A 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interfac… | column | RouterID | .1.3.6.1.4.1.8886.1.47.2.1.1.2 |
| raisecomOspfReset Reset ospf process by process ID. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.47.2.1.1.20 |
| raisecomOspfExportMetric The default metric of imporing route into ospf process. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.21 |
| raisecomOspfExportTag The default tag of importing route into ospf process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.22 |
| raisecomOspfExportType The default type of importing route into ospf process. | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.1.1.23 |
| raisecomOspfNetCounts It bas been used to describe the total number of networks in OSPF process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.24 |
| raisecomOspfAreaCounts It bas been used to describe the number of areas in OSPF process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.25 |
| raisecomOspfNssaAreaCounts It bas been used to describe the number of NSSA areas in OSPF process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.26 |
| raisecomOspfSpfCounts It bas been used to describe the total number of SPF calculation in OSPF process. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.27 |
| raisecomOspfRedistributeRouteLimit import limit of route. | column | Integer32 | .1.3.6.1.4.1.8886.1.47.2.1.1.29 |
| raisecomOspfAdminStat The administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one interface;
'disabled' disables it on all interfaces.
… | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.47.2.1.1.3 |
| raisecomOspfVersionNumber The current version number of the OSPF protocol is 2. | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.1.1.4 |
| raisecomOspfAreaBdrRtrStatus A flag to note whether this router is an Area
Border Router. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.47.2.1.1.5 |
| raisecomOspfASBdrRtrStatus A flag to note whether this router is configured as
an Autonomous System Border Router.
This object is persistent and when written the
entity SHOULD save the change… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.1.47.2.1.1.6 |
| raisecomOspfExternLsaCount The number of external (LS type-5) link state
advertisements in the link state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.1.47.2.1.1.7 |
| raisecomOspfExternLsaCksumSum The 32-bit sum of the LS checksums of
the external link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a
change in… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.1.1.8 |
| raisecomOspfOriginateNewLsas The number of new link state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.
Discontinuities in the… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.1.47.2.1.1.9 |