raisecomOspfIfType

RAISECOM-OSPFV2-MIB · .1.3.6.1.4.1.8886.1.47.2.6.1.4
MIB view Table view

Object

column r/w Enumeration 
The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType.
Broadcast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies take the value 'nbma', and links
that are definitively point to point take the
value 'pointToPoint'.

Context

MIB
RAISECOM-OSPFV2-MIB
OID
.1.3.6.1.4.1.8886.1.47.2.6.1.4
Type
column
Access
readwrite
Status
current
Parent
raisecomOspfIfEntry
Table
raisecomOspfIfTable
Siblings
28

Syntax

Enumeration

Values & Constraints

Enumerated Values
1broadcast
2nbma
3pointToPoint
5pointToMultipoint

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
raisecomOspfAddressLessIf
For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of if…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.8886.1.47.2.6.1.1
raisecomOspfIfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This valu…
columnseconds PositiveInteger.1.3.6.1.4.1.8886.1.47.2.6.1.10
raisecomOspfIfPollInterval
The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
columnseconds PositiveInteger.1.3.6.1.4.1.8886.1.47.2.6.1.11
raisecomOspfIfState
The OSPF Interface State.
columnEnumeration.1.3.6.1.4.1.8886.1.47.2.6.1.12
raisecomOspfIfDesignatedRouter
The IP address of the designated router.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.1.47.2.6.1.13
raisecomOspfIfBackupDesignatedRouter
The IP address of the backup designated router.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.1.47.2.6.1.14
raisecomOspfIfEvents
The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.8886.1.47.2.6.1.15
raisecomOspfIfAuthKeyId
The key id of md5 authentication.
columnInteger32.1.3.6.1.4.1.8886.1.47.2.6.1.16
raisecomOspfIfAuthSimpleKeyType
The type of password for simple authentication.
columnEnumeration.1.3.6.1.4.1.8886.1.47.2.6.1.17
raisecomOspfIfAuthMd5KeyType
The type of password for md5 authentication.
columnEnumeration.1.3.6.1.4.1.8886.1.47.2.6.1.18
raisecomOspfIfAuthSimpleKey
The password used as an OSPF authentication key when simple password security is enabled.
columnOctetString.1.3.6.1.4.1.8886.1.47.2.6.1.19
raisecomOspfIfIpAddress
The IP address of this OSPF interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.1.47.2.6.1.2
raisecomOspfIfAuthMd5Key
The password used as an OSPF authentication key when md5 security is enabled.
columnOctetString.1.3.6.1.4.1.8886.1.47.2.6.1.20
raisecomOspfIfAuthKeyChain
The name of key chain.
columnOctetString.1.3.6.1.4.1.8886.1.47.2.6.1.21
raisecomOspfIfAuthType
The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router.
columnOspfAuthenticationType.1.3.6.1.4.1.8886.1.47.2.6.1.22
raisecomOspfIfLsaCount
The total number of link-local link state advertisements in this interface's link-local link state database.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.8886.1.47.2.6.1.23
raisecomOspfIfLsaCksumSum
The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8886.1.47.2.6.1.24
raisecomOspfIfDesignatedRouterId
The Router ID of the designated router.
columnRouterID.1.3.6.1.4.1.8886.1.47.2.6.1.25
raisecomOspfIfBackupDesignatedRouterId
The Router ID of the backup designated router.
columnRouterID.1.3.6.1.4.1.8886.1.47.2.6.1.26
raisecomOspfIfPassive
Indicate the interface is a passive interface.
columnSWITCH-TCEnableVar.1.3.6.1.4.1.8886.1.47.2.6.1.27
raisecomOspfIfMtu
Indicate ignore the interface's mtu.
columnSWITCH-TCEnableVar.1.3.6.1.4.1.8886.1.47.2.6.1.28
raisecomOspfIfMetric
The metric of using this Type of Service on this interface. The default value of the TOS 0 metric is 10^8 / ifSpeed.
columnMetric.1.3.6.1.4.1.8886.1.47.2.6.1.29
raisecomOspfIfAreaId
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
columnAreaID.1.3.6.1.4.1.8886.1.47.2.6.1.3
raisecomOspfIfAdminStat
The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes…
columnStatus.1.3.6.1.4.1.8886.1.47.2.6.1.5
raisecomOspfIfRtrPriority
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi…
columnDesignatedRouterPriority.1.3.6.1.4.1.8886.1.47.2.6.1.6
raisecomOspfIfTransitDelay
The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second.
columnseconds UpToMaxAge.1.3.6.1.4.1.8886.1.47.2.6.1.7
raisecomOspfIfRetransInterval
The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting da…
columnseconds UpToMaxAge.1.3.6.1.4.1.8886.1.47.2.6.1.8
raisecomOspfIfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
columnseconds HelloRange.1.3.6.1.4.1.8886.1.47.2.6.1.9