raisecomOspfAreaNssaTranslatorState
RAISECOM-OSPFV2-MIB ·
.1.3.6.1.4.1.8886.1.47.2.2.1.11
Object
column
Enumeration
Indicates if and how an NSSA border router is
performing NSSA translation of type-7 LSAs into type-5
LSAs. When this object is set to enabled, the NSSA Border
router's OspfAreaNssaExtTranslatorRole has been set to
always. When this object is set to elected, a candidate
NSSA Border router is Translating type-7 LSAs into type-5.
When this object is set to disabled, a candidate NSSA
border router is NOT translating type-7 LSAs into type-5.
Context
- MIB
- RAISECOM-OSPFV2-MIB
- OID
.1.3.6.1.4.1.8886.1.47.2.2.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- raisecomOspfAreaEntry
- Table
- raisecomOspfAreaTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | elected |
3 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomOspfAreaId A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone. | column | AreaID | .1.3.6.1.4.1.8886.1.47.2.2.1.1 |
| raisecomOspfAreaNssaTranslatorRole Indicates an NSSA border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs. | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.2.1.10 |
| raisecomOspfAreaNssaTranslatorStabilityInterval The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties. | column | seconds PositiveInteger | .1.3.6.1.4.1.8886.1.47.2.2.1.12 |
| raisecomOspfAreaNssaTranslatorEvents Indicates the number of translator state changes
that have occurred since the last boot-up.
Discontinuities in the value of this counter can occur
at re-initializat… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.1.47.2.2.1.13 |
| raisecomOspfAreaDefaultCost It indicates the cost of default route of NSSA area or
stub area. | column | BigMetric | .1.3.6.1.4.1.8886.1.47.2.2.1.14 |
| raisecomOspfAreaType It has been used to describe the type of
area,area 0 indicates backbone, area that has virtual-links is
transmit area. When area is configured as stub,it's a stub area, and
sam… | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.2.1.15 |
| raisecomOspfAreaAbrCount It has been used to describe the number of ABR in this area. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.2.1.16 |
| raisecomOspfAreaAsbrCount It has been used to describe the number of ASBR in this area. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.2.1.17 |
| raisecomOspfAreaStatus This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8886.1.47.2.2.1.18 |
| raisecomOspfAreaFilterInIpPrefixListName Filter incoming summary lsa,the value of this object
indicates the name of an ip-prefix-list. | column | OctetString | .1.3.6.1.4.1.8886.1.47.2.2.1.19 |
| raisecomOspfAuthType The authentication type specified for an area. | column | OspfAuthenticationType | .1.3.6.1.4.1.8886.1.47.2.2.1.2 |
| raisecomOspfAreaFilterOutIpPrefixListName Filter outgoing summary lsa,the value of this object
indicates the name of an ip-prefix-list. | column | OctetString | .1.3.6.1.4.1.8886.1.47.2.2.1.20 |
| raisecomOspfImportAsExtern Indicates if an area is a stub area, NSSA, or standard
area. Type-5 AS-external LSAs and type-11 Opaque LSAs are
not imported into stub areas or NSSAs. NSSAs import
AS-external … | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.2.1.3 |
| raisecomOspfSpfRuns The number of times that the intra-area route
table has been calculated using this area's
link state database. This is typically done
using Dijkstra's algorithm.
D… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8886.1.47.2.2.1.4 |
| raisecomOspfAreaBdrRtrCount The total number of Area Border Routers reachable
within this area. This is initially zero and is
calculated in each Shortest Path First (SPF) pass. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.1.47.2.2.1.5 |
| raisecomOspfAsBdrRtrCount The total number of Autonomous System Border
Routers reachable within this area. This is
initially zero and is calculated in each SPF
pass. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.1.47.2.2.1.6 |
| raisecomOspfAreaLsaCount The total number of link state advertisements
in this area's link state database, excluding
AS-external LSAs. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8886.1.47.2.2.1.7 |
| raisecomOspfAreaLsaCksumSum The 32-bit sum of the link state
advertisements' LS checksums contained in this
area's link state database. This sum excludes
external (LS type-5) link state advertisements.
The … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.47.2.2.1.8 |
| raisecomOspfAreaSummary The variable ospfAreaSummary controls the
import of summary LSAs into stub and NSSA areas.
It has no effect on other areas.
If it is noAreaSummary, the router will … | column | Enumeration | .1.3.6.1.4.1.8886.1.47.2.2.1.9 |