RAD-OamCfm-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
28
Rows
28
Columns
368

radMepTable

table deprecated
.1.3.6.1.4.1.164.3.1.6.1.3.1 · 1 row entry · 33 columns
Open in standard view 
MEG End Point (MEP) configuration table associated with
Maitenance Entity Group (MEG) End Point.
MEP is a short name for an expanded ETH flow point that includes a compound
ETH Segment flow termination function, which marks the end point of an ETH ME,
and a compound ETH Diagnostic flow function.
radMepEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.1.1
An entry in the table.
Indexes
radOamIdx1 radOamEvcIdx radMepIdx
Column Syntax OID
radOamIdx1 deprecated
This object may indicate the Bridge Index or Configuration index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.1
radOamEvcIdx deprecated
This object indicates the Index of the EVC (Ethernet Virtual Circuit)
that the MEP is associated to.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.2
radMepIdx deprecated
This object indicates the ID of the MEP being accessed.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.3
radMepRowStatus deprecated
This attribute allows to create/delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.4
radMepLocalMepId
This object indicates the local MEP ID.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.5
radMepRemoteMepId
This atribute is currently implemneted at radMepCcTable, that
supports multicast.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.6
radMepOamMode
This object determines the OAM mode of the MEP:
disabled - no CC is initiated nor responded
initiate - the device initiates and responds to CC
react - the device does not initiate a CC, but responds to CC.
Enumerationr/w
Enumerated Values:
2disabled
3initiate
4react
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.7
radMepContinuityVerMode
This object determines the OAM behavior of the MEP:
disabled - no CC is done
cc_based - CC is done based on incoming messages
lb_based - CC is done based on loopback messages.
Enumerationr/w
Enumerated Values:
2disabled
3ccBased
4lbBased
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.8
radMepMeLevel
At any point in a network, ME Level is used to distinguish between OAM
signals belonging to different nested MEs.
Maintenance Entity Levels are defined as follows:
0,1,2 are assigned to customers
3,4 are assigned to …
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.9
radMepOamDestAddrType
This object determines if the OAM messages are sent to user defined
unicast address, or to RAD proprietary multicast address.
Enumerationr/w
Enumerated Values:
1unicast
2multicast
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.10
radMepOamDestMacAddr
This object determines the MAC address that OAM packets are sent to.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.11
radMepDefaultPriority
This object defines the priority of the OAM messages sent when no
service is defined on EVC. If a service is defined, the OAM messages
will get the highest service priority existing on the EVC.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.12
radMepCcStatus
This object indicates the Continuity Check (CC)
status.
Enumeration
Enumerated Values:
1notApplicable
2fail
3ok
4mismerge
5unexpectedMep
6unexpectedMeLevel
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.13
radMepOamProtocol
Determines whether to use proprietary OAM mechanism,
or to use the standard (IEEE 802.1ag, ITU-T Y.1731).
Enumerationr/w
Enumerated Values:
1proprietary
2standard
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.14
radMepMdId
The index of the Maintenance Domain in the radMdTable (radMdIndex).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.15
radMepMaFormat
The type (and thereby format) of the Maintenance Association
Name.
Enumerationr/w
Enumerated Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
32icc
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.16
radMepMaName
The Short Maintenance Association name.
OctetStringr/w
Constraints:
range: 1-45
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.17
radMepSpVlanId
The SP (Service Provider) VLAN used when sending an OAM message.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.18
radMepCcInterval
Indicates the interval at which CCMs are sent by a MEP
Valid only if radMepOamMode = initiate(4).
Enumerationr/w
Enumerated Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.19
radMepTransmitLbmDestMacAddress
The Target MAC Address Field to be transmitted in the Loopback Message:
For unicast MAC Address this is the unicast destination MAC address.
For multicast MAC Address, this variable is read-only.
This address will be u…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.20
radMepTransmitLbmDestMepId
The MEPID of another MEP in the same MA to which the
LBM is to be sent. This address will be used if the value of
radMepTransmitLbmDestIsMepId is yes (3).
802.1ag clause 12.14.7.3.2:b.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.21
radMepTransmitLbmDestIsMepId
yes (3) indicates that MEPID of the target MEP is used for loopback transmission.
no (2) indicates that unicast destination MAC address of the target MEP is used.
802.1ag clause 12.14.7.3.2:b.
Enumerationr/w
Enumerated Values:
2no
3yes
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.22
radMepTransmitLbmMassages
The number of Loopback messages to be transmitted.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.23
radMepTransmitLbmVlanPriority
The priority to be used in the VLAN tag, if present,
in the transmitted frame.
The default value is CCM priority.
802.1ag clause 12.14.7.3.2:e
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.24
radMepTransmitLbmVlanDropEnable
Drop Enable bit to be used in the VLAN tag, if present,
in the transmitted frame.
802.1ag clause 12.14.7.3.2:e
Enumerationr/w
Enumerated Values:
2no
3yes
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.25
radMepLbrIn
Total number of valid, in-order Loopback Replies received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.26
radMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies
received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.27
radMepLbmOut
Total number of Loopback Messages transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.28
radMepTransmitLtmTargetMacAddress
The Target MAC Address Field to be transmitted in the Link Trace Message:
A unicast destination MAC address.
This address will be used
if the value of radMepTransmitLtmTargetIsMepId is no (2).
802.1ag clause 12.14.…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.29
radMepTransmitLtmTargetMepId
The MEPID of another MEP in the same MA to which
LTM is to be transmitted. This address will be used
if the value of radMepTransmitLtmTargetIsMepId is yes (3).
802.1ag clause 12.14.7.4.2:c.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.30
radMepTransmitLtmTargetIsMepId
yes (3) indicates that MEPID of the target MEP is used for Linktrace transmission.
no (2) indicates that unicast destination MAC address of the target MEP is used.
802.1ag clause 12.14.7.4.2:c.
Enumerationr/w
Enumerated Values:
2no
3yes
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.31
radMepTransmitLtmTtl
The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the LTM.
Decremented by 1 each Linktrace Responder that handles the LTM.
The value received in the LTM i…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.32
radMepTransmitLtmActivationCmd
Activation command for starting Loop Trace. Set will be always
to 'on' value. After operation was finished, Agent will turn the value to 'off'.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.1.6.1.3.1.1.33

ethOamServiceTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.1 · 1 row entry · 45 columns
Open in standard view 
Service configuration table associated with Services running on a MEP.
ethOamServiceEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1
An entry in the table. Indices are as follows:
- radOamIdx1 corresponds to MD Id (IEEE8021-CFM-MIB.dot1agCfmMdIndex).
- radOamEvcIdx corresponds to MA Id (IEEE8021-CFM-MIB.dot1agCfmMaIndex).
- radMepIdx corresponds to M…
Indexes
radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx
Column Syntax OID
ethOamServiceIdx
This object indicates the Index of the service being accessed.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.1
ethOamServiceRowStatus
This attribute allows to create/delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.2
ethOamServicePriority
This object determines the priority of the service.
It is sent as P bits in an OAM message originated by this service.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.3
ethOamServicePmEnable
This object determines PM (Performance Monitoring)
shall be enabled or not for the service.
Setting the object to disable(2) will stop the PM activity
of all Destination NEs of this service.
Enumerationr/w
Enumerated Values:
2disable
3enable
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.4
ethOamServiceFrameLossRatioThresh
This object determines the Frame Loss ratio threshold in exponent
of 1/10. That is, a value of 4 means that the threshold is 1E-4.
Integer32r/w
Constraints:
range: 3-10
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.5
ethOamServiceDelayThresh
This object determines the delay threshold defined for this service,
in measurement unit of 0.1 milliseconds (100 x usec).
Integer32r/w
Constraints:
range: 0-5000000
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.6
ethOamServiceDelayVarThresh
This object determines the delay-variation threshold defined for this service,
in measurement unit of 0.1 milliseconds (100 x usec).
Integer32r/w
Constraints:
range: 0-5000000
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.7
ethOamServiceUnavailRatioThresh
This object determines the Unavailability ratio threshold in exponent
of 1/10. That is, a value of 4 means that the threshold is 1E-4.
Integer32r/w
Constraints:
range: 3-10
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.8
ethOamServiceTxFrames
Counts the number of frames trnasmitted by since the time the service is up.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.9
ethOamServiceOverflowTxFrames
The number of times the associated
ethOamServiceTxFrames counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.10
ethOamServiceFarEndFrameLoss
Counts the number of frames lost at the far end
since the time the service is up.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.11
ethOamServiceOverflowFarEndFrameLoss
The number of times the associated
ethOamServiceFarEndFrameLoss counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.12
ethOamServiceFarEndFrameLossRatio
Indicates the ratio of the lost frames at the far end
since the time the service is up.
The value is the ratio multiplied by 1E10.
0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.13
ethOamServiceElapsedTime
Indicates the time elapsed in seconds since the time the service is up.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.14
ethOamServiceUnavailSec
Indicates the number of unavailable seconds since
the time the service is up.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.15
ethOamServiceUnavailRatio
Indicates the ratio of the unavailable seconds since the
time the service is up. The value is the ratio multiplied by 1E10.
0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.16
ethOamServiceFramesAboveDelay
Indicates the number of frames arrived with delay
greater than the delay threshold.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.17
ethOamServiceOverflowFramesAboveDelay
Indicates the number of times the associated
ethOamServiceFramesAboveDelay counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.18
ethOamServiceFramesAboveDelayVar
Indicates the number of frames arrived with delay variation
greater than the delay variation threshold.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.19
ethOamServiceOverflowFramesAboveDelayVar
Indicates the number of times the associated
ethOamServiceFramesAboveDelayVar counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.20
ethOamServiceCurrentDelay
Indicates the last measured delay sample.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.21
ethOamServiceCurrentDelayVariation
Indicates the last measured delay variation sample.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.22
ethOamServiceResetCounters
Reset all PM counters of the selected service.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.23
ethOamServiceNearEndFrameLoss
Counts the number of frames lost at the near end
since the time the service is up.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.25
ethOamServiceOverflowNearEndFrameLoss
The number of times the associated
ethOamServiceNearEndFrameLoss counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.26
ethOamServiceNearEndFrameLossRatio
Indicates the ratio of the lost frames at the near end
since the time the service is up.
The value is the ratio multiplied by 1E10.
0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.27
ethOamServiceDmmInterval
Indicates the interval between DMM transmissions.
This value is used by all Destination NEs defined on a Service.
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w
Textual Convention: IEEE8021-CFM-MIBDot1agCfmCcmInterval Enumeration
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.28
ethOamServiceLmmInterval
Indicates the interval between PM transmissions:
DMM and LMM in Phase 2, LMM only in Phase 3.
This value is used by all Destination NEs defined on a Service.
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w
Textual Convention: IEEE8021-CFM-MIBDot1agCfmCcmInterval Enumeration
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.29
ethOamServiceTxLmm SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.30
ethOamServiceOverflowTxLmm SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.31
ethOamServiceTxDmm SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.32
ethOamServiceOverflowTxDmm SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.33
ethOamServiceRxLmr
Counts the number of LMR frames received since the time
the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.34
ethOamServiceOverflowRxLmr
The number of times the associated
ethOamDestNeRxLmr counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.35
ethOamServiceRxDmr
Counts the number of DMR frames received since the time
the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.36
ethOamServiceOverflowRxDmr
The number of times the associated
ethOamDestNeRxDmr counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.37
ethOamServiceTxForward
Counts the number of transmitted frames in the forward direction
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.38
ethOamServiceOverflowTxForward
Indicates the number of times the associated
ethOamDestNeTxForward counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.39
ethOamServiceRxForward
Counts the number of received frames in the forward direction
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.40
ethOamServiceOverflowRxForward
Indicates the number of times the associated
ethOamDestNeRxForward counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.41
ethOamServiceTxBackward
Counts the number of transmitted frames in the backward direction
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.42
ethOamServiceOverflowTxBackward
Indicates the number of times the associated
ethOamDestNeTxBackward counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.43
ethOamServiceRxBackward
Counts the number received frames in the backward direction
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.44
ethOamServiceOverflowRxBackward
Indicates the number of times the associated
ethOamDestNeTxBackward counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.45
ethOamServiceConvertedIndex
This attribute defines the converted index (according to entityConvertIndexTable )
assigned to this Service.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.46

ethOamSvcCurrentStatTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.2 · 1 row entry · 38 columns
Open in standard view 
ETH OAM Service/Destination NE Current PM counters Table.
ethOamSvcCurrentStatEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1
Each entry in this table contains the ETH OAM PM counters for the current interval.
The counters are per Service, and/or per Destination NE.
The value of the 4th index - ethOamServiceIdx - is either the Service ID, or,
…
Indexes
radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx
Column Syntax OID
ethOamSvcCurrFramesAboveDelayThresh
Number of frames that arrived in the current interval
at a delay greater than the threshold value defined for the service.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.1
ethOamSvcCurrFramesBelowDelayThresh
Number of frames that arrived in the current interval at a delay
lower than or equal to the threshold value defined for the service.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.2
ethOamSvcCurrFramesAboveDVarThresh
Number of frames that arrived in the current interval at a delay
variation greater than the threshold value defined for the service.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.3
ethOamSvcCurrFramesBelowDVarThresh
Number of frames that arrived in the current interval
at a delay variation lower than or equal to the
threshold value defined for the service.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.4
ethOamSvcCurrFramesTxCounter
Number of trnasmitted frames in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.5
ethOamSvcCurrFarEndFramesLossCounter
The number of lost frames at the far end
in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.6
ethOamSvcCurrMinRoundTripDelay
The mininal value of round trip delay in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.7
ethOamSvcCurrMaxRoundTripDelay
The maximum value of round trip delay in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.8
ethOamSvcCurrAvgRoundTripDelay
The average round trip delay in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.9
ethOamSvcCurrMaxRoundTripDVar
The maximum value of round trip delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.10
ethOamSvcCurrAvgRoundTripDVar
The average round trip delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.11
ethOamSvcCurrElapsedTime
The number of seconds that have elapsed since
the beginning of the current interval.
Integer32
Constraints:
range: 0-899
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.12
ethOamSvcCurrUnavailSec
The number of seconds that the service was unavailable in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.13
ethOamSvcCurrLmmTxFrames
Number of transmitted LMM frames in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.14
ethOamSvcCurrDmmTxFrames
Number of transmitted DMM frames in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.16
ethOamSvcCurrLmrRxFrames
Number of received LMR frames in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.19
ethOamSvcCurrDmrRxFrames
Number of received DMR frames in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.21
ethOamSvcCurrNearEndFramesLossCounter
The number of lost frames at the near end
in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.22
ethOamSvcCurrTxFramesForward
The total number of frames transmited in the forward direction
in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.23
ethOamSvcCurrRxFramesForward
The total number of of frames received in the forward direction
in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.24
ethOamSvcCurrTxFramesBackward
The total number of of frames transmited in the backward direction
(as reported by far-end) in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.25
ethOamSvcCurrRxFramesBackward
The total number of frames received in the backward direction
(as reported by far-end) in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.26
ethOamSvcCurrUnavailableIndForward
Counter reflecting the number of unavailability
indicators evaluated as unavailable in the forward direction
in the current interval.
secondsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.27
ethOamSvcCurrUnavailableIndBackward
Counter reflecting the number of unavailability
indicators evaluated as unavailable in the backward direction
in the current interval.
secondsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.28
ethOamSvcCurrNearEndFrameLossRatio
Object reflecting the percentage lost frames at the near end direction.
Equals to (near End frame loss / Tx frame count in the forward direction)
in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.29
ethOamSvcCurrFarEndFrameLossRatio
Object reflecting the percentage lost frames at the far end direction.
Equals to (Far End frame loss / Tx frame count in the forward direction)
in the current interval.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.30
ethOamSvcCurrMinRoundTripDVar
The minimal value of round trip delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.31
ethOamSvcCurrMinForwardDelay
The minimal value of one way (forward 1DM) delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.32
ethOamSvcCurrMaxForwardDelay
The maximum value of one way (forward 1DM) delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.33
ethOamSvcCurrAvgForwardDelay
The average value of one way (forward 1DM) delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.34
ethOamSvcCurrMinForwardDVar
The minimal value of one way forward delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.35
ethOamSvcCurrMaxForwardDVar
The maximum value of one way forward delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.36
ethOamSvcCurrAvgForwardDVar
The average value of one way forward delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.37
ethOamSvcCurrMinBackwardDVar
The minimal value of one way backward delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.38
ethOamSvcCurrMaxBackwardDVar
The maximum value of one way backward delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.39
ethOamSvcCurrAvgBackwardDVar
The average value of one way backward delay variation in the current interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.40
ethOamSvcCurrAvailableIndForward
Counter reflecting the number of availability
indicators evaluated as available in the forward direction
in the current interval.
secondsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.41
ethOamSvcCurrAvailableIndBackward
Counter reflecting the number of availability
indicators evaluated as available in the backward direction
in the current interval.
secondsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.42

ethOamSvcIntervalTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.3 · 1 row entry · 41 columns
Open in standard view 
Each entry in this table contains the ETH OAM PM counters
collected over the previous 24 hours of operation.
The past 24 hours are broken into 96 completed 15 minute intervals.
The counters are per Service, and/or per Destination NE.
Please refer to for ethOamSvcCurrentStatEntry for index resolution.
ethOamSvcIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1
Interval Statistics per service
Indexes
radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamSvcIntervalNum
Column Syntax OID
ethOamSvcIntervalNum
The Interval index, which is actualy the Interval number,
where 1 is the most recently completed 15 minute interval,
and 96 is the least recently completed 15 minutes interval
(assuming that all 96 intervals exist).
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.1
ethOamSvcIntervalFramesAboveDelayThresh
Number of frames that arrived in a delay greater than the
threshold value defined for the service in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.2
ethOamSvcIntervalFramesBelowDelayThresh
Number of frames that arrived in a delay lower than the
threshold value defined for the service in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.3
ethOamSvcIntervalFramesAboveDVarThresh
Number of frames that arrived in a delay variation greater than the
threshold value defined for the service in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.4
ethOamSvcIntervalFramesBelowDVarThresh
Number of frames that arrived in a delay variation lower than the
threshold value defined for the service in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.5
ethOamSvcIntervalFramesTxCounter
Number of trnasmitted frames in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.6
ethOamSvcIntervalFarEndFramesLossCounter
The number of lost frames at the far end
in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.7
ethOamSvcIntervalMinRoundTripDelay
The mininal value of round trip delay in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.8
ethOamSvcIntervalMaxRoundTripDelay
The maximum value of round trip delay in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.9
ethOamSvcIntervalAvgRoundTripDelay
The average round trip delay in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.10
ethOamSvcIntervalMaxRoundTripDVar
The maximum value of round trip delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.11
ethOamSvcIntervalAvgRoundTripDVar
The average round trip delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.12
ethOamSvcIntervalUnavailSec
The number of seconds that the service was unavailable
in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.13
ethOamSvcIntervalLmmTxFrames
Number of transmitted LMM frames in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.14
ethOamSvcIntervalDmmTxFrames
Number of transmitted DMM frames in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.16
ethOamSvcIntervalLmrRxFrames
Number of received LMR frames in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.19
ethOamSvcIntervalDmrRxFrames
Number of received DMR frames in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.21
ethOamSvcIntervalNearEndFramesLossCounter
The number of lost frames at the near end
in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.22
ethOamSvcIntervalTxFramesForward
The number of transmitted frames in the forward direction
in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.23
ethOamSvcIntervalRxFramesForward
The number of received frames in the forward direction
in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.24
ethOamSvcIntervalTxFramesBackward
The number of transmitted frames in the backward direction
in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.25
ethOamSvcIntervalRxFramesBackward
The number of received frames in the backward direction
in the selected interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.26
ethOamSvcIntervalUnavailableIndForward
Counter reflecting the number of unavailability
indicators evaluated as unavailable in the forward direction
in the selected interval.
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.27
ethOamSvcIntervalUnavailableIndBackward
Counter reflecting the number of unavailability
indicators evaluated as unavailable in the backward direction
in the selected interval.
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.28
ethOamSvcIntervalNearEndFrameLossRatio
Object reflecting the percentage lost frames at the near end direction.
Equals to (near End frame loss / Tx frame count in the forward direction)
in the current interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.29
ethOamSvcIntervalFarEndFrameLossRatio
Object reflecting the percentage lost frames at the far end direction.
Equals to (Far End frame loss / Tx frame count in the forward direction)
in the current interval.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.30
ethOamSvcIntervalValidData
This object indicates if the data for this interval is
valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.31
ethOamSvcIntervalDuration
The Object presents duration of a particular interval
in seconds. The partial second is counted.
Integer32
Constraints:
range: 1-900
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.32
ethOamSvcIntervalTimeStamp
The Object presents date and time of start of Interval.
Time zone octets are not used (OCTET STRING (SIZE (8)).
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.33
ethOamSvcIntervalMinRoundTripDVar
The minimal value of round trip delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.34
ethOamSvcIntervalMinForwardDelay
The minimal value of one way (forward 1DM) delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.35
ethOamSvcIntervalMaxForwardDelay
The maximum value of one way (forward 1DM) delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.36
ethOamSvcIntervalAvgForwardDelay
The average value of one way (forward 1DM) delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.37
ethOamSvcIntervalMinForwardDVar
The minimal value of one way forward delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.38
ethOamSvcIntervalMaxForwardDVar
The maximum value of one way forward delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.39
ethOamSvcIntervalAvgForwardDVar
The average value of one way forward delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.40
ethOamSvcIntervalMinBackwardDVar
The minimal value of one way backward delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.41
ethOamSvcIntervalMaxBackwardDVar
The maximum value of one way backward delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.42
ethOamSvcIntervalAvgBackwardDVar
The average value of one way backward delay variation in the selected interval.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.43
ethOamSvcIntervalAvailableIndForward
Counter reflecting the number of availability
indicators evaluated as available in the forward direction
in the selected interval.
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.44
ethOamSvcIntervalAvailableIndBackward
Counter reflecting the number of availability
indicators evaluated as available in the backward direction
in the selected interval.
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.45

ethOamSvcTotalTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.4 · 1 row entry · 37 columns
Open in standard view 
ETH OAM Service Total (24H) Statistics Table.
ethOamSvcTotalEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1
Each entry in this table contains the ETH OAM PM counters
collected over the previous 24 hours of operation.
The counters are per Service, and/or per Destination NE.
Please refer to for ethOamSvcCurrentStatEntry for ind…
Indexes
radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx
Column Syntax OID
ethOamSvcTotalFramesAboveDelayThresh
Number of frames that arrived in a delay greater than the
threshold value defined for the service in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.1
ethOamSvcTotalFramesBelowDelayThresh
Number of frames that arrived in a delay lower than the
threshold value defined for the service in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.2
ethOamSvcTotalFramesAboveDVarThresh
Number of frames that arrived in a delay variation greater than the
threshold value defined for the service in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.3
ethOamSvcTotalFramesBelowDVarThresh
Number of frames that arrived in a delay variation lower than the
threshold value defined for the service in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.4
ethOamSvcTotalFramesTxCounter
Number of trnasmitted frames in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.5
ethOamSvcTotalFarEndFramesLossCounter
The nuumber of lost frames at the far end
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.6
ethOamSvcTotalMinRoundTripDelay
The mininal value of round trip delay in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.7
ethOamSvcTotalMaxRoundTripDelay
The maximum value of round trip delay in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.8
ethOamSvcTotalAvgRoundTripDelay
The average round trip delay in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.9
ethOamSvcTotalMaxRoundTripDVar
The maximum value of round trip delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.10
ethOamSvcTotalAvgRoundTripDVar
The average round trip delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.11
ethOamSvcTotalUnavailSec
The number of seconds that the service was unavailable
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.12
ethOamSvcTotalLmmTxFrames
Number of transmitted LMM frames in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.13
ethOamSvcTotalDmmTxFrames
Number of transmitted DMM frames in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.15
ethOamSvcTotalLmrRxFrames
Number of received LMR frames in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.18
ethOamSvcTotalDmrRxFrames
Number of received DMR frames in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.20
ethOamSvcTotalNearEndFramesLossCounter
The number of lost frames at the near end
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.21
ethOamSvcTotalTxFramesForward
Number of transmitted frames in the forward direction
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.22
ethOamSvcTotalRxFramesForward
Number of received frames in the forward direction
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.23
ethOamSvcTotalTxFramesBackward
Number of transmitted frames in the backward direction
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.24
ethOamSvcTotalRxFramesBackward
Number of received frames in the backward direction
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.25
ethOamSvcTotalUnavailableIndForward
Counter reflecting the number of unavailability
indicators evaluated as unavailable in the forward direction
in the last 24H.
secondsPerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.26
ethOamSvcTotalUnavailableIndBackward
Counter reflecting the number of unavailability
indicators evaluated as unavailable in the backward direction
in the last 24H
secondsPerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.27
ethOamSvcTotalMinRoundTripDVar
The minimal value of round trip delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.29
ethOamSvcTotalMinForwardDelay
The minimal value of one way (forward 1DM) delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.30
ethOamSvcTotalMaxForwardDelay
The maximum value of one way (forward 1DM) delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.31
ethOamSvcTotalAvgForwardDelay
The average value of one way (forward 1DM) delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.32
ethOamSvcTotalMinForwardDVar
The minimal value of one way (forward 1DM) delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.33
ethOamSvcTotalMaxForwardDVar
The maximum value of one way (forward 1DM) delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.34
ethOamSvcTotalAvgForwardDVar
The average value of one way (forward 1DM) delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.35
ethOamSvcTotalMinBackwardDVar
The minimal value of one way backward delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.36
ethOamSvcTotalMaxBackwardDVar
The maximum value of one way backward delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.37
ethOamSvcTotalAvgBackwardDVar
The average value of one way backward delay variation in the last 24H.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.38
ethOamSvcTotalForwardFrameLossRatio
Object reflecting the percentage lost frames at the forward direction.
Equals to (near End frame loss / Tx frame count in the backward direction)
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.39
ethOamSvcTotalBackwardFrameLossRatio
Object reflecting the percentage lost frames at the backward direction.
Equals to (Far End frame loss / Tx frame count in the forward direction)
in the last 24H.
PerfHist-TC-MIBPerfTotalCount
Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.40
ethOamSvcTotalAvailableIndForward
Counter presenting the number of availability indicators
evaluated as available in the forward direction in the last 24H.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.41
ethOamSvcTotalAvailableIndBackward
Counter presenting the number of availability indicators
evaluated as available in the backward direction in the last 24H.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.42

ethOamDestNeTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.5 · 1 row entry · 60 columns
Open in standard view 
One of the targets in ETH OAM is to support point-to-point
as well as point-to-multipoint PM.
For point-to-multipoint support it is needed to identify each of
the remote NEs to which PM frames are sent,
and from which PM frames are received.
PM activity for each such remote NE (Destination NE)
is managed separately,
maintaining its own set of parameters and PM counters.
          
Note:
In point-to-multipoint PM mode, only the first
defined Destination NE (per Service)
will count the transmitted (DMM, LMM) multicast frames.
ethOamDestNeEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1
Each entry in the table holds the parameters of a Destination NE.
Indexes
radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamDestNeIdx
Column Syntax OID
ethOamDestNeIdx
This object indicates the Index of the Destination NE being accessed.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.1
ethOamDestNeRowStatus
This attribute allows to create/delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.2
ethOamDestNePmDestAddr
This object indicates the destination NE (remote) MAC Address
that PM frames (LMMs, DMMs, LMRs and DMRs) are sent to.
If its value is 0, then the ethOamDestNePmRemoteMepId will be used.
Setting this object to a value di…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.3
ethOamDestNePmRemoteMepId
This object indicates the Remote MEP ID that PM frames are sent to.
This parameter refers to dot1agCfmMaMepListIdentifier of the MEP.
If no remote MEP has been learned yet, the value will be 0,
until a remote MEP is lea…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.4
ethOamDestNePmActivity deprecated
This object defines the PM activity of the specific Destination NE.
Setting this object to 0 (all zeros) will stop all PM activity
for the Destination NE.
singleEndedLoss(0) and dualEndedLoss(1) cannot be set simultaneo…
Bitsr/w
Enumerated Values:
0singleEndedLoss
1dualEndedLoss
2oneWayDelay
3twoWayDelay
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.5
ethOamDestNeTxFrames
Counts the total number of frames transmitted since the time
the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.6
ethOamDestNeOverflowTxFrames
The number of times the associated
ethOamDestNeTxFrames counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.7
ethOamDestNeTxLmm
Counts the number of LMM frames transmitted since the time
the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.8
ethOamDestNeOverflowTxLmm
The number of times the associated
ethOamDestNeTxLmm counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.9
ethOamDestNeTxDmm
Counts the number of DMM frames transmitted since the time
the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.12
ethOamDestNeOverflowTxDmm
The number of times the associated
ethOamDestNeTxDmm counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.13
ethOamDestNeRxLmr
Counts the number of LMR frames received since the time
the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.18
ethOamDestNeOverflowRxLmr
The number of times the associated
ethOamDestNeRxLmr counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.19
ethOamDestNeRxDmr
Counts the number of DMR frames received since the time
the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.22
ethOamDestNeOverflowRxDmr
The number of times the associated
ethOamDestNeRxDmr counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.23
ethOamDestNeFarEndFrameLoss
Counts the number of frames lost at the far end
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.24
ethOamDestNeOverflowFarEndFrameLoss
The number of times the associated
ethOamDestNeFarEndFrameLoss counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.25
ethOamDestNeFarEndFrameLossRatio
Indicates the ratio of the lost frames at the far end
since the time the service is up.
The value is the ratio multiplied by 1E10.
0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.26
ethOamDestNeTimeElapsed
Indicates the time elapsed in seconds since the time
the service is up, or since last counters reset.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.27
ethOamDestNeFramesAboveDelay
Indicates the number of frames arrived with delay
greater than the delay threshold, since the time
the service is up, or since last counters reset.
Delay threshold is defined in RMON-MIB in alarmTable (alarmRisingThresh…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.30
ethOamDestNeOverflowFramesAboveDelay
Indicates the number of times the associated
ethOamDestNeFramesAboveDelay counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.31
ethOamDestNeFramesAboveDelayVar
Indicates the number of frames arrived with delay variation
greater than the delay variation threshold, since the time
the service is up, or since last counters reset.
Delay variation threshold is defined in RMON-MIB in…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.32
ethOamDestNeOverflowFramesAboveDelayVar
Indicates the number of times the associated
ethOamDestNeFramesAboveDelayVar counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.33
ethOamDestNeCurrentDelay
Indicates the last measured delay sample.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.34
ethOamDestNeCurrentDelayVariation
Indicates the last measured delay variation sample.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.35
ethOamDestNeResetCounters
Reset all PM counters related to the Destination NE.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.36
ethOamDestNeNearEndFrameLoss
Counts the number of frames lost at the near end
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.37
ethOamDestNeOverflowNearEndFrameLoss
The number of times the associated
ethOamDestNeNearEndFrameLoss counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.38
ethOamDestNeNearEndFrameLossRatio
Indicates the ratio of the lost frames at the near end
since the time the service is up.
The value is the ratio multiplied by 1E10.
0xFFFFFFFF will be returned for ratio greater than 4/10 (40%).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.39
ethOamDestNeLmmTraffic
Determine if Frame Loss measurements will be applied on
synthetic traffic or on real traffic (all, Green only or
Yellow only, with or without CCM).
Note that if the MEP is configured in E-LAN forwarding mode,
only synth…
Enumerationr/w
Enumerated Values:
1syntheticTraffic
2realTraffic
3lmmSynthetic
4slm
5realTrafficGreen
6realTrafficYellow
7realTrafficNoCcm
8realTrafficGreenNoCcm
255notApplicable
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.40
ethOamDestNeFramesAboveDelayBinProfile
This variable defines the delay measurement bin profile assigned
to this Dest NE. If set to '0', no profile is assigned to this Dest NE.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.41
ethOamDestNeFramesAboveDelayVarBinProfile
This variable defines the dalay variation measurement bin profile assigned
to this Dest NE. If set to '0', no profile is assigned to this Dest NE.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.42
ethOamDestNeDmmDataTlvLength
This variable denotes the length of the data TLV sent in DMM frames.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.43
ethOamDestNeLossActivity
Determine the type of activity for Tx LMM.
Enumerationr/w
Enumerated Values:
1none
2singleEnded
3dualEnded
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.44
ethOamDestNeDelayActivity
Determine the type of activity for Tx DMM.
Enumerationr/w
Enumerated Values:
1none
2oneWay
3twoWay
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.45
ethOamDestNeTxForward
Counts the number of transmitted frames in the forward direction
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.46
ethOamDestNeOverflowTxForward
Indicates the number of times the associated
ethOamDestNeTxForward counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.47
ethOamDestNeRxForward
Counts the number of received frames in the forward direction
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.48
ethOamDestNeOverflowRxForward
Indicates the number of times the associated
ethOamDestNeRxForward counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.49
ethOamDestNeTxBackward
Counts the number of transmitted frames in the backward direction
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.50
ethOamDestNeOverflowTxBackward
Indicates the number of times the associated
ethOamDestNeTxBackward counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.51
ethOamDestNeRxBackward
Counts the number received frames in the backward direction
since the time the service is up, or since last counters reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.52
ethOamDestNeOverflowRxBackward
Indicates the number of times the associated
ethOamDestNeTxBackward counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.53
ethOamDestNeUnavailableIndForward
Counts the number of unavailability indicators evaluated
as unavailable in the forward direction
since the time the service is up, or since last counters reset.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.54
ethOamDestNeOverflowUnavailableIndForward
Indicates the number of times the associated
ethOamDestNeUnavailableIndForward counter has overflowed.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.55
ethOamDestNeUnavailableIndBackward
Counts Counts the number of unavailability indicators evaluated
as unavailable in the backward direction
since the time the service is up, or since last counters reset.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.56
ethOamDestNeOverflowUnavailableIndBackward
Indicates the number of times the associated
ethOamDestNeUnavailableIndBackward counter has overflowed.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.57
ethOamDestNeUnavailRatioForward
Indicates the ratio of the unavailable seconds, in the forward
direction, in the last 48 intervals. (12 hours window).
The mib value is the ratio multiplied by 1000.
0xFFFFFFFF will be returned for ratio greater than 4/…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.58
ethOamDestNeUnavailRatioBackward
Indicates the ratio of the unavailable seconds, in the backward
direction, in the last 48 intervals period (12 hours window).
The mib value is the ratio multiplied by 1000.
0xFFFFFFFF will be returned for ratio greater …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.59
ethOamDestNeDescr
A textual string containing information about the Remote MEP.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.61
ethOamDestNeConvertedIndex
This attribute defines the converted index (according to entityConvertIndexTable )
assigned to this Dest NE.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.62
ethOamDestNeSlmDataTlvLength
This object indicates the SLM Data TLV length.
It is taken into consideration only if ethOamDestNeLmmTraffic
is set to 'slm'(4).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.63
ethOamDestNeLmMode
Determines Loss Measurement work mode:
rx(1): Rx only.
txAndRx(2): Tx and Rx.
Enumerationr/w
Enumerated Values:
1rx
2txAndRx
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.64
ethOamDestNeSlmTestId
This object indicates the unique indication per EVC.COS
and MEP/RMEP of SLM Test ID.
Range of values is 1..255.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.65
ethOamDestNeForwardDelayVarBinProfile
This variable defines the 1-Way delay measurement bin
profile assigned to this Dest NE forward direction. if set
to '0', no profile is assigned to this Dest NE.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.66
ethOamDestNeBackwardDelayVarBinProfile
This variable defines the 1-Way delay measurement bin
profile assigned to this Dest NE backward direction. if set
to '0', no profile is assigned to this Dest NE.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.67
ethOamDestNeAvailableIndForward
Counts the number of availability indicators evaluated
as available in the forward direction since the time the
service is up, or since last counters reset.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.68
ethOamDestNeAvailableIndBackward
Counts the number of availability indicators evaluated
as available in the backward direction since the time the
service is up, or since last counters reset.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.69
ethOamDestNeDelayVariationForward
Indicates the last calculated one way forward delay variation
value.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.70
ethOamDestNeDelayVariationBackward
Indicates the last calculated one way forward delay variation
value.
microsecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.5.1.71

ethOamSvcRmonConfigTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.6 · 1 row entry · 6 columns
Open in standard view 
The purpose of this table is to enable RMON parameters configuration
for all Destination NEs that exists for a certain service.
ethOamSvcRmonConfigEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.6.1
An entry in this table includes parameters to be configured in
alarmTable and eventTable of RMON-MIB.
When the manager creates an entry in this table, the agent
automatically creates corresponding entries in
RMON-MIB.al…
Indexes
radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamSvcRmonConfigPerfAttrib
Column Syntax OID
ethOamSvcRmonConfigPerfAttrib
Each value corresponds to a service performance attribute
(as defined in MEF 10.1), that can be monitored.
The value set to this variable is used to resolve which counter's
OID will be set to alarmTable.alarmVariable of…
Enumeration
Enumerated Values:
1framesAboveDelay
2framesAboveDelayVar
3farEndFrameLossRatio
4nearEndFrameLossRatio
5unavailabilityRatio
6farEndUnavailabilityRatio
7nearEndUnavailabilityRatio
 .1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.1
ethOamSvcRmonConfigRowStatus
This variable enables table row creation and deletion.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.2
ethOamSvcRmonConfigAlarmInterval
The value set to this variable will be set (by the agent) to
alarmTable.alarmInterval in RMON-MIB for each Dest NE.
The measurement unit is seconds.
For further information refer to RFC-2819.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.3
ethOamSvcRmonConfigAlarmRisingThresh
The value set to this variable will be set (by the agent) to
alarmTable.alarmRisingThreshold in RMON-MIB for each Dest NE.
For further information refer to RFC-2819.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.4
ethOamSvcRmonConfigAlarmFallingThresh
The value set to this variable will be set (by the agent) to
alarmTable.alarmFallingThreshold in RMON-MIB for each Dest NE.
For further information refer to RFC-2819.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.5
ethOamSvcRmonConfigEventType
The value set to this variable will be set (by the agent) to
eventTable.eventType in RMON-MIB for each Dest NE.
For further information refer to RFC-2819.
Enumerationr/w
Enumerated Values:
1none
2log
3snmptrap
4logandtrap
 .1.3.6.1.4.1.164.3.1.6.1.3.2.6.1.6

ethOamMeasureBinProfileTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.7 · 1 row entry · 4 columns
Open in standard view 
This table defines measurement bin profiles, to be used for
threshold setting of FD (Frame Delay) and FDV (Frame Delay Variation) measurements.
ethOamMeasureBinProfileEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.7.1
Each entry in this table represents a profile that can be
bind to a Dest NE.
Indexes
ethOamMeasureBinProfileIndex
Column Syntax OID
ethOamMeasureBinProfileIndex
This attribute defines the Measurement Bin profile index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.1
ethOamMeasureBinProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.2
ethOamMeasureBinProfileName
A string to denote the profile's name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.3
ethOamMeasureBinThresh
The structure of this variable is as follows:
Each consecutive 4 bytes represent a threshold value.
There are up to 10 possible bins per measurement type (FD, FDV).
The first 4 bytes represent the upper threshold of Bin…
OctetStringr/w
Constraints:
range: 36-36
 .1.3.6.1.4.1.164.3.1.6.1.3.2.7.1.4

ethOamDelayCurrentBinsTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.8 · 1 row entry · 3 columns
Open in standard view 
This table holds a set of Frame Delay bin or Frame Delay Variation
counters in the current interval.
The number of bins is determined according to the Bin Profile selected
per Dest NE.
For Dest NE resolution (ethOamServiceIdx) refer to ethOamSvcCurrentStatTable.
ethOamDelayCurrentBinsEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.8.1
Each entry in the table holds a Frame Delay or Frame Delay Variation
bin counter of a Destination NE in the current interval.
Indexes
radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamDelayCurrentBinCounterType ethOamDelayCurrentBinNumber
Column Syntax OID
ethOamDelayCurrentBinCounterType
Define counter type for current bin measurements
(See Textual Convention for detailed defintion.)
EthOamBinCounterType
Textual Convention: EthOamBinCounterType Enumeration
Type Values:
1rtDelay
2rtDelayVar
3fwDelay
4fwDelayVar
5bwDelay
6bwDelayVar
 .1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.1
ethOamDelayCurrentBinNumber
This variable denotes the Frame Delay or Frame Delay Variation Bin number
in the current interval.
The bin upper threshold is derived from the corresponding bytes of
ethOamMeasureBinThresh of the Bin Profile selected pe…
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.2
ethOamDelayCurrentBinValue
This variable counts the number of frames that arrived in the current interval
with delay or or Delay Variation falling within the bin range.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.8.1.3

ethOamDelayIntervalBinsTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.2.10 · 1 row entry · 3 columns
Open in standard view 
This table holds a set of Frame Delay or Frame Delay Variation
bin counters in the last 24H period.
The number of bins is determined according to the Bin Profile selected
per Dest NE.
ethOamDelayIntervalBinsEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.2.10.1
Each entry in the table holds a Frame Delay or Frame Delay Variation
bin counter of a Destination NE in the selected interval.
For Dest NE resolution (ethOamServiceIdx) refer to ethOamSvcIntervalStatTable.
Indexes
radOamIdx1 radOamEvcIdx radMepIdx ethOamServiceIdx ethOamSvcIntervalNum ethOamDelayIntervalBinCounterType ethOamDelayIntervalBinNumber
Column Syntax OID
ethOamDelayIntervalBinCounterType
Define counter type for current bin measurements
(See Textual Convention for detailed defintion.)
EthOamBinCounterType
Textual Convention: EthOamBinCounterType Enumeration
Type Values:
1rtDelay
2rtDelayVar
3fwDelay
4fwDelayVar
5bwDelay
6bwDelayVar
 .1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.1
ethOamDelayIntervalBinNumber
This variable denotes the Frame Delay or Frame Delay Variation
bin number in the selected interval.
The bin upper threshold is derived from the corresponding bytes of
ethOamMeasureBinThresh of the Bin Profile selected p…
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.2
ethOamDelayIntervalBinValue
This variable counts the number of frames in the selected interval
that arrived with delay or Delay Variation falling within the bin range.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.164.3.1.6.1.3.2.10.1.3

radMdTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.3 · 1 row entry · 4 columns
Open in standard view 
The MaintenanceDomain table. Each row in the table represents
a different maintenance domain.
          
A Maintenance domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance.
radMdEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.3.1
The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage
Indexes
radMdIndex
Column Syntax OID
radMdIndex
The index to the maintenance domain table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.3.1.1
radMdFormat
The type (and thereby format) of the Maintenance Domain Name.
Enumerationr/w
Enumerated Values:
1none
2dnsLikeName
3macAddressAndUint
4charString
 .1.3.6.1.4.1.164.3.1.6.1.3.3.1.2
radMdName
The Maintenance Domain name. The type/format of this object
is determined by the value of the radMdNameType object.

Each Maintenance Domain has unique name amongst all those
used or available to a servi…
OctetStringr/w
Constraints:
range: 1-43
 .1.3.6.1.4.1.164.3.1.6.1.3.3.1.3
radMdRowStatus
This attribute allows to create/delete a row in this table.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.1.3.3.1.4

radMepLtrTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.4 · 1 row entry · 10 columns
Open in standard view 
This table contains a list of Linktrace replies 
received by a specific MEP in response to
a linktrace message.
radMepLtrEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.4.1
The LinktraceReply table entry.
Indexes
radOamIdx1 radMepIdx radMepLtrReceiveOrder
Column Syntax OID
radMepLtrReceiveOrder
An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value. radMepLtrReceiveOrder
are assigned sequentially from 1, in the order that the
Linktrace Initiator received the LTRs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.1
radMepLtrTtl
TTL field value for a returned LTR.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.2
radMepLtrMacAddr
The MAC address in the header of the returned LTR.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.3
radMepLtrRelay
The value returned in the Relay Action field:
rlyHit - the LTM reached an MP whose MAC address matches the target MAC address.
rlyFdb - the Egress Port was determined by consulting the Filtering Database.
rlyMpdb - the …
Enumeration
Enumerated Values:
1rlyHit
2rlyFdb
3rlyMpdb
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.4
radMepLtrIngress
The value returned in the Ingress Action Field of the LTM.
ingNoTlv - no Reply Ingress TLV was returned in the LTM.
ingOK - the target data frame would be passed through to the MAC Relay Entity.
ingDown - the Bridge Por…
Enumeration
Enumerated Values:
1ingNoTlv
2ingOk
3ingDown
4ingBlocked
5ingVid
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.5
radMepLtrIngressPortIdSubtype
The format of the Ingress Port ID.
If the radMepLtrIngress object contains the value
egrNoTlv(1), then the contents of this object are meaningless.
802.1ag clauses 12.14.7.5.3:m and 20.36.2.8
LLDP-MIBLldpPortIdSubtype
Textual Convention: LLDP-MIBLldpPortIdSubtype Enumeration
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.6
radMepLtrIngressPortId
Ingress Port ID. This is an alpha-numeric string that contains a
specific identifier for the port.
The format of this object is determined by
the value of the radMepLtrIngressPortIdSubtype object.
If the radMepLtrIngr…
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.7
radMepLtrEgress
The value returned in the Egress Action Field of the LTM.
The value egrNoTlv(1) indicates that no Reply Egress TLV was
returned in the LTM.
802.1ag clauses 12.14.7.5.3:o and 20.36.2.10
Enumeration
Enumerated Values:
1egrNoTlv
2egrOK
3egrDown
4egrBlocked
5egrVid
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.8
radMepLtrEgressPortIdSubtype
The format of the egress Port ID.
If the radMepLtrEgress object contains the value
egrNoTlv(1), then the contents of this object are meaningless.
802.1ag clauses 12.14.7.5.3:q and 20.36.2.12
LLDP-MIBLldpPortIdSubtype
Textual Convention: LLDP-MIBLldpPortIdSubtype Enumeration
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.9
radMepLtrEgressPortId
Egress Port ID. The format of this object is determined by
the value of the radMepLtrEgressPortIdSubtype object.
If the radMepLtrEgress object contains the value
egrNoTlv(1), then the contents of this object are meaning…
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.1.6.1.3.4.1.10

radMepCcStatusTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.5 · 1 row entry · 4 columns
Open in standard view 
This table contains a list of CC Status  
received by a specific MEP from different Remote MEPs.
radMepCcStatusEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.5.1
An entry in the CC Status Table.
Indexes
radOamIdx1 radMepIdx radMepRemoteMepIdx
Column Syntax OID
radMepRemoteMepIdx
This is a running index for arriving CC messages (from different Remote MEPs)
for a specific MEP ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.5.1.1
radMepCcStatusRemMepId
This attribute indicates the Remote MEP ID from which the CC
messages has arrived.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.5.1.2
radMepCcStat
This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I):
mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with the
correct MEG level, but incorrect MEG ID.
unexpected…
Enumeration
Enumerated Values:
1notApplicable
2fail
3ok
4mismerge
5unexpectedMep
6unexpectedMeLevel
7unexpectedPeriod
8rdi
 .1.3.6.1.4.1.164.3.1.6.1.3.5.1.3
radMepCcStatusMacAddr
This object indicates the MAC Address in the
CC Status message received.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.3.1.6.1.3.5.1.4

dot1agXCfmMdTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.8 · 1 row entry · 1 columns
Open in standard view 
The Maintenance Domain table. Each row in the table represents
a different maintenance association.
dot1agXCfmMdEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.8.1
The Maintenance Domain table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex
Column Syntax OID
dot1agXCfmMdProtocol
.
Enumerationr/w
Enumerated Values:
1preStandard
2standard
 .1.3.6.1.4.1.164.3.1.6.1.3.8.1.1

dot1agXCfmMepTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.9 · 1 row entry · 25 columns
Open in standard view 
The Maintenance Association End Point (MEP) table.
dot1agXCfmMepEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.9.1
The MEP table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier
Column Syntax OID
dot1agXCfmMepContinuityVerMode
This object determines the OAM behavior of the MEP:
disabled - no Continuity Verification is done
cc_based - Continuity Verification is done based on incoming CC messages
lb_based - Continuity Verification is done based…
Enumerationr/w
Enumerated Values:
2disabled
3ccBased
4lbBased
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.1
dot1agXCfmMepDestAddrType
This object determines if the OAM messages are sent to user defined
unicast address, or to RAD proprietary multicast address.
Enumerationr/w
Enumerated Values:
1unicast
2multicast
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.2
dot1agXCfmMepDestMacAddr
This object determines the MAC address that OAM packets are sent to.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.3
dot1agXCfmMepMappingProfile
This attribute defines the Mapping/classification profile (flowMappingProfileTable )
assigned to this MEP.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.4
dot1agXCfmMepQBlock
This attribute defines the QBlock assigned to this MEP.
ObjectIdentifierr/w .1.3.6.1.4.1.164.3.1.6.1.3.9.1.5
dot1agXCfmMepFixedQueueMapping
This attribute defines the queue (cosProfileTable) that will be assigned to the MEP.
A value of 255 means that the Mep will use the profile according
to dot1agXCfmMepQueueMappingProfile.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.6
dot1agXCfmMepQueueMappingProfile
This attribute defines the queueMapping Profile (CosProfileTable) assigned to this MEP.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.7
dot1agXCfmMepConvertedIndex
This attribute defines the converted index (according to entityConvertIndexTable )
assigned to this MEP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.8
dot1agXCfmMepPmDestAddrType
This object defines the type of MAC Address being used by the PM frames
(Delay Measurement frames and Loss Measurement frames).
Enumerationr/w
Enumerated Values:
1unicast
2multicast
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.9
dot1agXCfmMepForwardingMode
This variable denotes the mode MEP forwarding mode.
If set to elan(2) mode, dot1agXCfmMepPmDestAddrType must be unicast(1).
Enumerationr/w
Enumerated Values:
1eline
2elan
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.10
dot1agXCfmMepLbmDataTlvLength
This variable denotes the length of the data TLV sent in LBM.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.11
dot1agXCfmMepClientMdLevel
This variable denotes the client MD level to transmit ETH-AIS and LCK frames.
It is irrelevant if the corresponding dot1agCfmMdMdLevel equals to 7.
Otherwise, it value must be greater than the corresponding value of dot…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.12
dot1agXCfmMepAisTransmit
This variable denotes if ETH-AIS frame transmission is enabled or not.
It can be enabled only if the value of the corresponding
dot1agCfmMdMdLevel is less than 7
Enumerationr/w
Enumerated Values:
2disable
3enable
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.13
dot1agXCfmMepAisInterval
This variable denotes the interval of ETH-AIS frame transmission.
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w
Textual Convention: IEEE8021-CFM-MIBDot1agCfmCcmInterval Enumeration
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.14
dot1agXCfmMepAisPriority
This variable denotes the priority of ETH-AIS frames.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.15
dot1agXCfmMepDefects
An extnetion to dot1agCfmMepDefects which is A vector of
Boolean error conditions, any of which may be true.
A MEP can detect and report a number of defects,
and multiple defects can be present at the same time.
The fo…
Bitsr/w
Enumerated Values:
0bDefAIS
1bDefLCK
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.16
dot1agXCfmMepLastAlarmDefect
This object indicates the last defect that generated an alarm at the MEP:
none no defects since FNG_RESET
defRDICCM RDI CCM
defMACstatus MAC status
defRemoteCCM Remote CCM
defErrorCCM Error CCM…
Enumeration
Enumerated Values:
1none
2defRDICCM
3defMACstatus
4defRemoteCCM
5defErrorCCM
6defXconCCM
7defAIS
8defLCK
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.17
dot1agXCfmMepCosMapping
This attribute defines MEP CoS mapping.
The value 0..7 indicates fixed CoS selection.
The value 255 defines using of dot1agXCfmMepCosMappingProfile
OBJECT belonging to this table (see below).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.19
dot1agXCfmMepCosMappingProfile
This attribute contains cosInternalProfileIndex that defines CoS
mapping profile assigned to this MEP, see cosInternalProfileTable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.20
dot1agXCfmMepCcStatus
This obejct indicates the Continuity Check status.
If no bit is set then it means that the ststus is ok.
If notApplicable (0) is set then the other bits should not be set.
If otherFail (1) is set then the other bits sho…
Bits
Enumerated Values:
0notApplicable
1otherFail
2mismerge
3unexpectedMep
4unexpectedMepLevel
5unexpectedPeriod
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.24
dot1agXCfmMepStatus
This objects indicates the test status of the MEP.
Enumeration
Enumerated Values:
1none
2y1564
3rfc2544
4mef46Loop
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.28
dot1agXCfmMepExcludeCustomerTags
This objects denotes whether the tag structure of transmitted OAM
frames includes or excludes the customer tags (C-tags).

A value of true(1) forbids C-tags on OAM frames.
A value of false(2) allows C-tags…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.29
dot1agXCfmMepClearStatsCmd
A command that instructs the agent to clear
running statistics of selected MEP.
Setting this object to on(3), shall clear the MEP
statistics. Upon completion, the value shall automatically
change to off(2).
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.30
dot1agXCfmMepTimeElapsed
The number of seconds that have elapsed since the beginning of the
current statistics interval of the MEPs (local and remote).
(Time elapsed is common to MEP current interval statistics tables:
ethOamMepCurrentTable …
Unsigned32
Constraints:
range: 0-899
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.31
dot1agXCfmMepCcmTx
Total number of CCM PDUs transmitted by the MEP
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.164.3.1.6.1.3.9.1.32

dot1agXCfmMepDbTable

table deprecated
.1.3.6.1.4.1.164.3.1.6.1.3.10 · 1 row entry · 2 columns
Open in standard view 
The MEP DB table, now used for Remote MEP.
Table was deprectated and replaced by the following objects:
dot1agCfmMepDefects,  and dot1agCfmMepDbRMepState (standard MIB)
and dot1agXCfmMepDefects
dot1agXCfmMepDbEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.10.1
The MEP Database table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier IEEE8021-CFM-MIBdot1agCfmMepDbRMepIdentifier
Column Syntax OID
dot1agXCfmMepCcStat deprecated
This object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I):
mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with the
correct MEG level, but incorrect MEG ID.
unexpectedMep…
Enumeration
Enumerated Values:
1notApplicable
2fail
3ok
4mismerge
5unexpectedMep
6unexpectedMeLevel
7unexpectedPeriod
8rdi
 .1.3.6.1.4.1.164.3.1.6.1.3.10.1.1
dot1agXCfmMepDbConvertedIndex deprecated
This attribute defines the converted index (according to entityConvertIndexTable )
assigned to this remote MEP.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.10.1.2

dot1agXCfmMaMepListTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.11 · 1 row entry · 2 columns
Open in standard view 
The MA List table
dot1agXCfmMaMepListEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.11.1
The known MEPS table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMaMepListIdentifier
Column Syntax OID
dot1agXCfmMaMepListLocalMep
If the entry is of a Remote MEP then
this variable denotes the Local MEPID that the Remote MEPID applies to.
If the entry is of a Local MEP, then this variable will be set to 0xFFFF.
It intends to support the case of mu…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.11.1.1
dot1agXCfmMaMepListDescr
This object defines the description of MEP entity.
By default the device sets this object value in the following format:
1. If md name is not empty:
md: 'IEEE8021-CFM-MIB.dot1agCfmMdName'
…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.1.6.1.3.11.1.2

ethIfOamCfmMipTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.12.1 · 1 row entry · 7 columns
Open in standard view 
The Maintenance Entity Group Intermediate Point (MIP) table.
MIP entities are defined under MD (Maintenance Domain Level).
ethIfOamCfmMipEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.12.1.1
The MIP (per MD) table entry.
Indexes
ethIfOamCfmMipMdIdx ethIfOamCfmMipIdx
Column Syntax OID
ethIfOamCfmMipMdIdx
The index to the Maintenance Domain (MD).
See dot1agCfmMdIndex description in the IEEE8021-CFM-MIB.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.1
ethIfOamCfmMipIdx
The index to the Maintenance Entity Group Intermediate
Point (MIP)
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.2
ethIfOamCfmMipRowStatus
The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns MUST have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.3
ethIfOamCfmMipBoundedPortIfIndex
This object is the interface index of the interface to
which the MIP is attached. If no such interface exists, then
the variable is set to 0.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.4
ethIfOamCfmMipFlowType
uni-directional indicates that the flow
is defined from ingress port to egress,
bi-directional indicates both flow parameters
for ingress to egress and opposite.
Enumerationr/w
Enumerated Values:
1uniDirectional
2biDirectional
 .1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.5
ethIfOamCfmMipFlowRxIndex
The received flow for the MIP that holds the MIP 1 classification
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.6
ethIfOamCfmMipFlowTxIndex
The received flow for the MIP that holds the MIP 2 classification
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.1.1.7

ethIfOamCfmMhfTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.12.2 · 1 row entry · 12 columns
Open in standard view 
The MIP Half Function (MHF) table.
The table defines MHF configuration, two MHF entities per
MIP.
ethIfOamCfmMhfEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1
The MHF table entry
Indexes
ethIfOamCfmMhfMdIdx ethIfOamCfmMhfMipIdx ethIfOamCfmMhfIdx
Column Syntax OID
ethIfOamCfmMhfMdIdx
The index to the Maintenance Domain (MD).
See description of the dot1agCfmMdIndex in the
IEEE8021-CFM-MIB.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.1
ethIfOamCfmMhfMipIdx
The index to the Maintenance Entity Group Intermediate
Point (MIP)
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.2
ethIfOamCfmMhfIdx
The index to the MIP Half Function (MHF).
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.3
ethIfOamCfmMhfActive
A Boolean indicating the administrative state of the MHF.
True indicates that the MHF is to function normally, and
false that it is to cease functioning.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.4
ethIfOamCfmMhfOutputPortIfIndex
This object is the interface index of the output interface
of the MHF. If no such interface exists, then the variable
is set to 0.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.5
ethIfOamCfmMhfPrimaryVid
This object indicates the Primary VID of the MHF.
The value 0 defines using of ethIfOamCfmMhfMappingProfile
OBJECT belonging to this table (see below).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.6
ethIfOamCfmMhfMappingProfile
This attribute defines the Mapping (Classification) profile
(flowMappingProfileTable) assigned to this MHF.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.7
ethIfOamCfmMhfCosMapping
This attribute defines MHF CoS mapping.
The value 0..7 indicates fixed CoS selection.
The value 255 defines use of ethIfOamCfmMhfCosMappingProfile
OBJECT belonging to this table (see below).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.8
ethIfOamCfmMhfCosMappingProfile
The attribute contains cosInternalProfileIndex that defines
CoS mapping profile assigned to this MHF, see
cosInternalProfileTable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.9
ethIfOamCfmMhfQBlock
This attribute defines the QBlock assigned to this MHF.
ObjectIdentifierr/w .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.10
ethIfOamCfmMhfFixedQueueMapping
This attribute defines the queue (cosProfileTable) that is
assigned to the MHF.
The value 255 defines using of
ethIfOamCfmMhfQueueMappingProfile OBJECT belonging to this
table (see below).
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.11
ethIfOamCfmMhfQueueMappingProfile
This attribute defines the queueMapping Profile
(CosProfileTable) assigned to this MHF.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.12.2.1.12

ethOamMipTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.13.1 · 1 row entry · 3 columns
Open in standard view 
The Maintenance Entity Group Intermediate Point (MIP) table.
MIP entities are defined per port and VLAN.
This table holds all the MIPs that were created.
ethOamMipEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.13.1.1
The MIP (per port and VLAN) table entry.
Indexes
ethOamMipIfIndex ethOamMipVlanId
Column Syntax OID
ethOamMipIfIndex
The port index associated with this MIP port.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.13.1.1.1
ethOamMipVlanId
The VLAN-ID with which the MIP is associated on the
interface.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.13.1.1.2
ethOamMipMdLevel
The MD level of the MIP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.13.1.1.3

dot1agXCfmMaNetTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.15 · 1 row entry · 2 columns
Open in standard view 
An extension to the standard Maintenance Association
table, dot1agCfmMaNetTable
dot1agXCfmMaNetEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.15.1
The Maintenance Association table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex
Column Syntax OID
dot1agXCfmMaNetServiceIdName
This attribute specify the Service ID name of this MA.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.1.6.1.3.15.1.1
dot1agXCfmMaNetIfStatusTlv
This object determines if Interface Status TLV is added in
CCM message.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.164.3.1.6.1.3.15.1.2

ethOamMepFlowsTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.16 · 1 row entry · 4 columns
Open in standard view 
Multiple flows association to MEP.
ethOamMepFlowsEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.16.1
Entry in this table represents flow association to MEP.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier ethOamMepFlowType ethOamMepFlowIndex1 ethOamMepFlowIndex2
Column Syntax OID
ethOamMepFlowType
Flow direction:
uniDirectionalRx - flow toward the UNI (LAN)),
uniDirectionalTx - flow toward the NNI (WAN)),
bidirectional - two flows with same index,
having same properties, in opposite directions.
Enumeration
Enumerated Values:
1uniDirectionalRx
2uniDirectionalTx
3biDirectional
 .1.3.6.1.4.1.164.3.1.6.1.3.16.1.1
ethOamMepFlowIndex1
Flow 1st index, equals to MEF-R flowTable flowIdx1
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.16.1.2
ethOamMepFlowIndex2
Flow 2nd index, equals to MEF-R flowTable flowIdx2
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.16.1.3
ethOamMepFlowsRowStatus
This attribute allows to create/delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.1.3.16.1.4

ethOamConfigTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.17 · 1 row entry · 7 columns
Open in standard view 
The purpose of this table is to enable the configuration
of all per-Device OAM parameters. A single row is automatically
created, and cannot be deleted.
ethOamConfigEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.17.1
An entry in this table includes parameters to be configured
Per Device.
Indexes
ethOamConfigIdx
Column Syntax OID
ethOamConfigIdx
This index is equal to 1.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.1.3.17.1.1
ethOamConfigAlarmType
This object indicates alarm legacy report configuration.
Legacy (1): Alarm name as defined in RAD OamCfm-MIB.
SOAM (2): Alarm name as defined in IEEE 802.1ag table 20-1.
Enumerationr/w
Enumerated Values:
1legacy
2soam
 .1.3.6.1.4.1.164.3.1.6.1.3.17.1.2
ethOamConfigAvailabilityDeltaT
This object indicates the length of the small time interval for
frame loss ratio calculation.
secondsUnsigned32r/w
Constraints:
range: 15-15
range: 1-6
range: 10-10
range: 12-12
range: 20-20
 .1.3.6.1.4.1.164.3.1.6.1.3.17.1.3
ethOamConfigAvailabilityNumDeltaTs
This object indicates the number of consecutive small
time intervals used to determine a change in the availability
status as indicated by MEF 10.2.1. This parameter is equivalent
to the Availability parameter of 'n' as…
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.164.3.1.6.1.3.17.1.4
ethOamConfigAvailabilityFwdFlrThreshold
This object indicates the Forward FLR threshold, in percentage,
to be used in evaluating the availability/unavailability status
of an availability indicator per MEF 10.2.1. This parameter is
equivalent to the Availabili…
percentsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.164.3.1.6.1.3.17.1.5
ethOamConfigAvailabilityBckFlrThreshold
This object indicates the Backward FLR threshold, in percentage,
to be used in evaluating the availability/unavailability status
of an availability indicator per MEF 10.2.1. This parameter is
equivalent to the Availabil…
percentsUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.164.3.1.6.1.3.17.1.6
ethOamConfigMdLevelMips
The global MIP/s that are configured for device services.
When configured, a MIP shall be automatically defined at the
specified MD level/s for all the services (EVCs) in the device.
Bitsr/w
Enumerated Values:
0mdlLevel0
1mdlLevel1
2mdlLevel2
3mdlLevel3
4mdlLevel4
5mdlLevel5
6mdlLevel6
7mdlLevel7
 .1.3.6.1.4.1.164.3.1.6.1.3.17.1.7

ethOamMepCurrentTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.18.1 · 1 row entry · 1 columns
Open in standard view 
Current interval statistics per local MEP.
ethOamMepCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.18.1.1
An entry in this table includes current interval counters of local MEP.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier
Column Syntax OID
ethOamMepCurrentCcmTx
Total number of CCM PDUs transmitted by local MEP
in the current interval
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.164.3.1.6.1.3.18.1.1.1

ethOamMepIntervalTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.18.2 · 1 row entry · 5 columns
Open in standard view 
This table provides local MEP statistics for the history intervals.
ethOamMepIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.18.2.1
An entry in this table is created by the agent for every ethOamMepCurrentEntry
that completes its statistics interval duration.

The contents of the current entry are copied to the new entry here.
The curren…
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier ethOamMepIntervalNumber
Column Syntax OID
ethOamMepIntervalNumber
A number N, between 1 and 96, which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently completed
interval, and the interval identified by N is the in…
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.1
ethOamMepIntervalValidData
This variable indicates if the data for this interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.2
ethOamMepIntervalDuration
The duration of this interval in seconds.
secondsUnsigned32
Constraints:
range: 0-900
 .1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.3
ethOamMepIntervalTimeStamp
The date and time of start of this interval.
Time zone octets are not used (OCTET STRING (SIZE (8)).
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.4
ethOamMepIntervalCcmTx
Total number of CCM PDUs transmitted by Local MEP.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.164.3.1.6.1.3.18.2.1.5

ethOamRMepStatsTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.18.3 · 1 row entry · 3 columns
Open in standard view 
Running statistics of remote MEP.
ethOamRMepStatsEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.18.3.1
An entry in this table includes running counters for remote MEP.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier ethOamRMepStatsRMepId
Column Syntax OID
ethOamRMepStatsRMepId
Remote MEP ID.
IEEE8021-CFM-MIBDot1agCfmMepId
Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepId Unsigned32
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.164.3.1.6.1.3.18.3.1.1
ethOamRMepStatsCcmRx
Total number of CCM PDUs received by the MEP.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.164.3.1.6.1.3.18.3.1.2
ethOamRMepStatsClearCmd
A command that instructs the agent to clear
running statistics of selected remote MEP.

Setting this object to on(3), shall clear the per MEP
statistics. Upon completion, the value shall automatically
cha…
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.1.6.1.3.18.3.1.3

ethOamRMepCurrentTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.18.4 · 1 row entry · 1 columns
Open in standard view 
Current interval statistics of remote MEP.
ethOamRMepCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.18.4.1
An entry in this table includes current interval counters of remote MEP.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier ethOamRMepStatsRMepId
Column Syntax OID
ethOamRMepCurrentCcmRx
Total number of CCM PDUs received by remote MEP in the current interval.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.164.3.1.6.1.3.18.4.1.1

ethOamRMepIntervalTable

table
.1.3.6.1.4.1.164.3.1.6.1.3.18.5 · 1 row entry · 5 columns
Open in standard view 
This table provides per remote MEP 
statistics for the history intervals.
ethOamRMepIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.1.3.18.5.1
An entry in this table is created by the agent for every ethOamRMepCurrentEntry
that completes its statistics interval duration.

The contents of the current entry are copied to the new entry here.
The curre…
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier ethOamRMepStatsRMepId ethOamRMepIntervalNumber
Column Syntax OID
ethOamRMepIntervalNumber
A number N, between 1 and 96, which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently completed
interval, and the interval identified by N is the in…
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.1
ethOamRMepIntervalValidData
This variable indicates if the data for this interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.2
ethOamRMepIntervalDuration
The duration of this interval in seconds.
secondsUnsigned32
Constraints:
range: 0-900
 .1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.3
ethOamRMepIntervalTimeStamp
The date and time of start of this interval. (time stamp)
Time zone octets are not used (OCTET STRING (SIZE (8)).
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.4
ethOamRMepIntervalCcmRx
Total number of CCM PDUs received by Remote MEP.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.164.3.1.6.1.3.18.5.1.5