dot1agXCfmMepCcmTx
RAD-OamCfm-MIB ·
.1.3.6.1.4.1.164.3.1.6.1.3.9.1.32
Object
column
SNMPv2-SMICounter64
Total number of CCM PDUs transmitted by the MEP
Context
- MIB
- RAD-OamCfm-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.1.3.9.1.32- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot1agXCfmMepEntry
- Table
- dot1agXCfmMepTable
- Siblings
- 24
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot1agXCfmMepContinuityVerMode This object determines the OAM behavior of the MEP:
disabled - no Continuity Verification is done
cc_based - Continuity Verification is done based on incoming CC messages
lb_based… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.1 |
| dot1agXCfmMepForwardingMode This variable denotes the mode MEP forwarding mode.
If set to elan(2) mode, dot1agXCfmMepPmDestAddrType must be unicast(1). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.10 |
| dot1agXCfmMepLbmDataTlvLength This variable denotes the length of the data TLV sent in LBM. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.11 |
| dot1agXCfmMepClientMdLevel This variable denotes the client MD level to transmit ETH-AIS and LCK frames.
It is irrelevant if the corresponding dot1agCfmMdMdLevel equals to 7.
Otherwise, it value must be gre… | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.12 |
| dot1agXCfmMepAisTransmit This variable denotes if ETH-AIS frame transmission is enabled or not.
It can be enabled only if the value of the corresponding
dot1agCfmMdMdLevel is less than 7 | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.13 |
| dot1agXCfmMepAisInterval This variable denotes the interval of ETH-AIS frame transmission. | column | IEEE8021-CFM-MIBDot1agCfmCcmInterval | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.14 |
| dot1agXCfmMepAisPriority This variable denotes the priority of ETH-AIS frames. | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.15 |
| dot1agXCfmMepDefects An extnetion to dot1agCfmMepDefects which is A vector of
Boolean error conditions, any of which may be true.
A MEP can detect and report a number of defects,
and multiple defects … | column | Bits | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.16 |
| dot1agXCfmMepLastAlarmDefect This object indicates the last defect that generated an alarm at the MEP:
none no defects since FNG_RESET
defRDICCM RDI CCM
defMACstatus MAC status
defRemoteCCM… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.17 |
| dot1agXCfmMepCosMapping This attribute defines MEP CoS mapping.
The value 0..7 indicates fixed CoS selection.
The value 255 defines using of dot1agXCfmMepCosMappingProfile
OBJECT belonging to this table … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.19 |
| dot1agXCfmMepDestAddrType This object determines if the OAM messages are sent to user defined
unicast address, or to RAD proprietary multicast address. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.2 |
| dot1agXCfmMepCosMappingProfile This attribute contains cosInternalProfileIndex that defines CoS
mapping profile assigned to this MEP, see cosInternalProfileTable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.20 |
| dot1agXCfmMepCcStatus This obejct indicates the Continuity Check status.
If no bit is set then it means that the ststus is ok.
If notApplicable (0) is set then the other bits should not be set.
If othe… | column | Bits | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.24 |
| dot1agXCfmMepStatus This objects indicates the test status of the MEP. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.28 |
| dot1agXCfmMepExcludeCustomerTags This objects denotes whether the tag structure of transmitted OAM
frames includes or excludes the customer tags (C-tags).
A value of true(1) forbids C-tags on OAM f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.29 |
| dot1agXCfmMepDestMacAddr This object determines the MAC address that OAM packets are sent to. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.3 |
| dot1agXCfmMepClearStatsCmd A command that instructs the agent to clear
running statistics of selected MEP.
Setting this object to on(3), shall clear the MEP
statistics. Upon completion, the value shall au… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.30 |
| dot1agXCfmMepTimeElapsed The number of seconds that have elapsed since the beginning of the
current statistics interval of the MEPs (local and remote).
(Time elapsed is common to MEP current interval sta… | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.31 |
| dot1agXCfmMepMappingProfile This attribute defines the Mapping/classification profile (flowMappingProfileTable )
assigned to this MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.4 |
| dot1agXCfmMepQBlock This attribute defines the QBlock assigned to this MEP. | column | ObjectIdentifier | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.5 |
| dot1agXCfmMepFixedQueueMapping This attribute defines the queue (cosProfileTable) that will be assigned to the MEP.
A value of 255 means that the Mep will use the profile according
to dot1agXCfmMepQueueMappingP… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.6 |
| dot1agXCfmMepQueueMappingProfile This attribute defines the queueMapping Profile (CosProfileTable) assigned to this MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.7 |
| dot1agXCfmMepConvertedIndex This attribute defines the converted index (according to entityConvertIndexTable )
assigned to this MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.8 |
| dot1agXCfmMepPmDestAddrType This object defines the type of MAC Address being used by the PM frames
(Delay Measurement frames and Loss Measurement frames). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.3.9.1.9 |